5bb8a7a7c6
* Enable dcache for OCRAM where the VM heap lives. * Add CIRCUITPY_SWO_TRACE for pushing program counters out over the SWO pin via the ITM module in the CPU. Exempt some functions from instrumentation to reduce traffic and allow inlining. * Place more functions in ITCM to handle errors using code in RAM-only and speed up CP. * Use SET and CLEAR registers for digitalio. The SDK does read, mask and write. * Switch to 2MiB reserved for CircuitPython code. Up from 1MiB. * Run USB interrupts during flash erase and write. * Allow storage writes from CP if the USB drive is disabled. * Get perf bench tests running on CircuitPython and increase timeouts so it works when instrumentation is active.
608 lines
20 KiB
Makefile
608 lines
20 KiB
Makefile
#
|
|
# This file is part of the MicroPython project, http://micropython.org/
|
|
#
|
|
# The MIT License (MIT)
|
|
#
|
|
# SPDX-FileCopyrightText: Copyright (c) 2019 Dan Halbert for Adafruit Industries
|
|
#
|
|
# Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
# of this software and associated documentation files (the "Software"), to deal
|
|
# in the Software without restriction, including without limitation the rights
|
|
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
# copies of the Software, and to permit persons to whom the Software is
|
|
# furnished to do so, subject to the following conditions:
|
|
#
|
|
# The above copyright notice and this permission notice shall be included in
|
|
# all copies or substantial portions of the Software.
|
|
#
|
|
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
# THE SOFTWARE.
|
|
|
|
# Boards default to all modules enabled (with exceptions)
|
|
# Manually disable by overriding in #mpconfigboard.mk
|
|
|
|
# Always on. Present here to help generate documentation module support matrix for "builtins".
|
|
CIRCUITPY = 1
|
|
CFLAGS += -DCIRCUITPY=$(CIRCUITPY)
|
|
|
|
# Smaller builds can be forced for resource constrained chips (typically SAMD21s
|
|
# without external flash) by setting CIRCUITPY_FULL_BUILD=0. Avoid using this
|
|
# for merely incomplete ports, as it changes settings in other files.
|
|
CIRCUITPY_FULL_BUILD ?= 1
|
|
CFLAGS += -DCIRCUITPY_FULL_BUILD=$(CIRCUITPY_FULL_BUILD)
|
|
|
|
# Reduce the size of in-flash properties. Requires support in the .ld linker
|
|
# file, so not enabled by default.
|
|
CIRCUITPY_OPTIMIZE_PROPERTY_FLASH_SIZE ?= 0
|
|
CFLAGS += -DCIRCUITPY_OPTIMIZE_PROPERTY_FLASH_SIZE=$(CIRCUITPY_OPTIMIZE_PROPERTY_FLASH_SIZE)
|
|
|
|
# async/await language keyword support
|
|
MICROPY_PY_ASYNC_AWAIT ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DMICROPY_PY_ASYNC_AWAIT=$(MICROPY_PY_ASYNC_AWAIT)
|
|
|
|
# uasyncio
|
|
# By default, include uasyncio if async/await are available.
|
|
MICROPY_PY_UASYNCIO ?= $(MICROPY_PY_ASYNC_AWAIT)
|
|
CFLAGS += -DMICROPY_PY_UASYNCIO=$(MICROPY_PY_UASYNCIO)
|
|
|
|
# uasyncio normally needs select
|
|
MICROPY_PY_USELECT ?= $(MICROPY_PY_UASYNCIO)
|
|
CFLAGS += -DMICROPY_PY_USELECT=$(MICROPY_PY_USELECT)
|
|
|
|
# enable select.select if select is enabled.
|
|
MICROPY_PY_USELECT_SELECT ?= $(MICROPY_PY_USELECT)
|
|
CFLAGS += -DMICROPY_PY_USELECT_SELECT=$(MICROPY_PY_USELECT_SELECT)
|
|
|
|
CIRCUITPY_AESIO ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_AESIO=$(CIRCUITPY_AESIO)
|
|
|
|
# TODO: CIRCUITPY_ALARM will gradually be added to as many ports as possible
|
|
# so make this 1 or CIRCUITPY_FULL_BUILD eventually
|
|
CIRCUITPY_ALARM ?= 0
|
|
CFLAGS += -DCIRCUITPY_ALARM=$(CIRCUITPY_ALARM)
|
|
|
|
CIRCUITPY_ANALOGBUFIO ?= 0
|
|
CFLAGS += -DCIRCUITPY_ANALOGBUFIO=$(CIRCUITPY_ANALOGBUFIO)
|
|
|
|
CIRCUITPY_ANALOGIO ?= 1
|
|
CFLAGS += -DCIRCUITPY_ANALOGIO=$(CIRCUITPY_ANALOGIO)
|
|
|
|
CIRCUITPY_ARRAY ?= 1
|
|
CFLAGS += -DCIRCUITPY_ARRAY=$(CIRCUITPY_ARRAY)
|
|
|
|
CIRCUITPY_ATEXIT ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_ATEXIT=$(CIRCUITPY_ATEXIT)
|
|
|
|
CIRCUITPY_AUDIOBUSIO ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_AUDIOBUSIO=$(CIRCUITPY_AUDIOBUSIO)
|
|
|
|
# Some boards have PDMIn but do not implement I2SOut.
|
|
CIRCUITPY_AUDIOBUSIO_I2SOUT ?= $(CIRCUITPY_AUDIOBUSIO)
|
|
CFLAGS += -DCIRCUITPY_AUDIOBUSIO_I2SOUT=$(CIRCUITPY_AUDIOBUSIO_I2SOUT)
|
|
|
|
# Likewise, some boards have I2SOut but do not implement PDMIn.
|
|
CIRCUITPY_AUDIOBUSIO_PDMIN ?= $(CIRCUITPY_AUDIOBUSIO)
|
|
CFLAGS += -DCIRCUITPY_AUDIOBUSIO_PDMIN=$(CIRCUITPY_AUDIOBUSIO_PDMIN)
|
|
|
|
CIRCUITPY_AUDIOIO ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_AUDIOIO=$(CIRCUITPY_AUDIOIO)
|
|
|
|
CIRCUITPY_AUDIOPWMIO ?= 0
|
|
CFLAGS += -DCIRCUITPY_AUDIOPWMIO=$(CIRCUITPY_AUDIOPWMIO)
|
|
|
|
ifndef CIRCUITPY_AUDIOCORE
|
|
ifeq ($(CIRCUITPY_AUDIOPWMIO),1)
|
|
CIRCUITPY_AUDIOCORE = $(CIRCUITPY_AUDIOPWMIO)
|
|
else
|
|
CIRCUITPY_AUDIOCORE = $(CIRCUITPY_AUDIOIO)
|
|
endif
|
|
endif
|
|
CFLAGS += -DCIRCUITPY_AUDIOCORE=$(CIRCUITPY_AUDIOCORE)
|
|
|
|
CIRCUITPY_AUDIOMIXER ?= $(CIRCUITPY_AUDIOIO)
|
|
CFLAGS += -DCIRCUITPY_AUDIOMIXER=$(CIRCUITPY_AUDIOMIXER)
|
|
|
|
ifndef CIRCUITPY_AUDIOMP3
|
|
ifeq ($(CIRCUITPY_FULL_BUILD),1)
|
|
CIRCUITPY_AUDIOMP3 = $(CIRCUITPY_AUDIOCORE)
|
|
else
|
|
CIRCUITPY_AUDIOMP3 = 0
|
|
endif
|
|
endif
|
|
CFLAGS += -DCIRCUITPY_AUDIOMP3=$(CIRCUITPY_AUDIOMP3)
|
|
|
|
CIRCUITPY_BINASCII ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_BINASCII=$(CIRCUITPY_BINASCII)
|
|
|
|
CIRCUITPY_BITBANG_APA102 ?= 0
|
|
CFLAGS += -DCIRCUITPY_BITBANG_APA102=$(CIRCUITPY_BITBANG_APA102)
|
|
|
|
CIRCUITPY_BITBANGIO ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_BITBANGIO=$(CIRCUITPY_BITBANGIO)
|
|
|
|
CIRCUITPY_BITOPS ?= 0
|
|
CFLAGS += -DCIRCUITPY_BITOPS=$(CIRCUITPY_BITOPS)
|
|
|
|
# _bleio can be supported on most any board via HCI
|
|
CIRCUITPY_BLEIO_HCI ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_BLEIO_HCI=$(CIRCUITPY_BLEIO_HCI)
|
|
|
|
# Explicitly enabled for boards that support _bleio.
|
|
CIRCUITPY_BLEIO ?= $(CIRCUITPY_BLEIO_HCI)
|
|
CFLAGS += -DCIRCUITPY_BLEIO=$(CIRCUITPY_BLEIO)
|
|
|
|
CIRCUITPY_BLE_FILE_SERVICE ?= 0
|
|
CFLAGS += -DCIRCUITPY_BLE_FILE_SERVICE=$(CIRCUITPY_BLE_FILE_SERVICE)
|
|
|
|
CIRCUITPY_BOARD ?= 1
|
|
CFLAGS += -DCIRCUITPY_BOARD=$(CIRCUITPY_BOARD)
|
|
|
|
CIRCUITPY_BUSDEVICE ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_BUSDEVICE=$(CIRCUITPY_BUSDEVICE)
|
|
|
|
CIRCUITPY_BUILTINS_POW3 ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_BUILTINS_POW3=$(CIRCUITPY_BUILTINS_POW3)
|
|
|
|
CIRCUITPY_BUSIO ?= 1
|
|
CFLAGS += -DCIRCUITPY_BUSIO=$(CIRCUITPY_BUSIO)
|
|
|
|
# These two flags pretend to implement their class but raise a ValueError due to
|
|
# unsupported pins. This should be used sparingly on boards that don't break out
|
|
# generic IO but need parts of busio.
|
|
CIRCUITPY_BUSIO_SPI ?= 1
|
|
CFLAGS += -DCIRCUITPY_BUSIO_SPI=$(CIRCUITPY_BUSIO_SPI)
|
|
|
|
CIRCUITPY_BUSIO_UART ?= 1
|
|
CFLAGS += -DCIRCUITPY_BUSIO_UART=$(CIRCUITPY_BUSIO_UART)
|
|
|
|
CIRCUITPY_CAMERA ?= 0
|
|
CFLAGS += -DCIRCUITPY_CAMERA=$(CIRCUITPY_CAMERA)
|
|
|
|
CIRCUITPY_CANIO ?= 0
|
|
CFLAGS += -DCIRCUITPY_CANIO=$(CIRCUITPY_CANIO)
|
|
|
|
CIRCUITPY_COLLECTIONS ?= 1
|
|
CFLAGS += -DCIRCUITPY_COLLECTIONS=$(CIRCUITPY_COLLECTIONS)
|
|
|
|
CIRCUITPY_COMPUTED_GOTO_SAVE_SPACE ?= 0
|
|
CFLAGS += -DCIRCUITPY_COMPUTED_GOTO_SAVE_SPACE=$(CIRCUITPY_COMPUTED_GOTO_SAVE_SPACE)
|
|
|
|
CIRCUITPY_CYW43 ?= 0
|
|
CFLAGS += -DCIRCUITPY_CYW43=$(CIRCUITPY_CYW43)
|
|
|
|
CIRCUITPY_DIGITALIO ?= 1
|
|
CFLAGS += -DCIRCUITPY_DIGITALIO=$(CIRCUITPY_DIGITALIO)
|
|
|
|
CIRCUITPY_COPROC ?= 0
|
|
CFLAGS += -DCIRCUITPY_COPROC=$(CIRCUITPY_COPROC)
|
|
|
|
CIRCUITPY_COUNTIO ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_COUNTIO=$(CIRCUITPY_COUNTIO)
|
|
|
|
CIRCUITPY_DISPLAYIO ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_DISPLAYIO=$(CIRCUITPY_DISPLAYIO)
|
|
|
|
ifeq ($(CIRCUITPY_DISPLAYIO),1)
|
|
CIRCUITPY_PARALLELDISPLAY ?= $(CIRCUITPY_FULL_BUILD)
|
|
else
|
|
CIRCUITPY_PARALLELDISPLAY = 0
|
|
endif
|
|
CFLAGS += -DCIRCUITPY_PARALLELDISPLAY=$(CIRCUITPY_PARALLELDISPLAY)
|
|
|
|
# bitmaptools and framebufferio rely on displayio
|
|
ifeq ($(CIRCUITPY_DISPLAYIO),1)
|
|
CIRCUITPY_BITMAPTOOLS ?= $(CIRCUITPY_FULL_BUILD)
|
|
CIRCUITPY_FRAMEBUFFERIO ?= $(CIRCUITPY_FULL_BUILD)
|
|
CIRCUITPY_VECTORIO ?= 1
|
|
else
|
|
CIRCUITPY_BITMAPTOOLS ?= 0
|
|
CIRCUITPY_FRAMEBUFFERIO ?= 0
|
|
CIRCUITPY_VECTORIO ?= 0
|
|
endif
|
|
CFLAGS += -DCIRCUITPY_BITMAPTOOLS=$(CIRCUITPY_BITMAPTOOLS)
|
|
CFLAGS += -DCIRCUITPY_FRAMEBUFFERIO=$(CIRCUITPY_FRAMEBUFFERIO)
|
|
CFLAGS += -DCIRCUITPY_VECTORIO=$(CIRCUITPY_VECTORIO)
|
|
|
|
CIRCUITPY_DUALBANK ?= 0
|
|
CFLAGS += -DCIRCUITPY_DUALBANK=$(CIRCUITPY_DUALBANK)
|
|
|
|
# Enabled micropython.native decorator (experimental)
|
|
CIRCUITPY_ENABLE_MPY_NATIVE ?= 0
|
|
CFLAGS += -DCIRCUITPY_ENABLE_MPY_NATIVE=$(CIRCUITPY_ENABLE_MPY_NATIVE)
|
|
|
|
CIRCUITPY_OS_GETENV ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_OS_GETENV=$(CIRCUITPY_OS_GETENV)
|
|
|
|
CIRCUITPY_ERRNO ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_ERRNO=$(CIRCUITPY_ERRNO)
|
|
|
|
# Espressif specific modules.
|
|
# Assume not an Espressif build.
|
|
CIRCUITPY_ESPIDF ?= 0
|
|
CFLAGS += -DCIRCUITPY_ESPIDF=$(CIRCUITPY_ESPIDF)
|
|
|
|
CIRCUITPY_ESPNOW ?= 0
|
|
CFLAGS += -DCIRCUITPY_ESPNOW=$(CIRCUITPY_ESPNOW)
|
|
|
|
CIRCUITPY_ESPULP ?= 0
|
|
CFLAGS += -DCIRCUITPY_ESPULP=$(CIRCUITPY_ESPULP)
|
|
|
|
CIRCUITPY_ESPCAMERA ?= 0
|
|
CFLAGS += -DCIRCUITPY_ESPCAMERA=$(CIRCUITPY_ESPCAMERA)
|
|
|
|
CIRCUITPY__EVE ?= 0
|
|
CFLAGS += -DCIRCUITPY__EVE=$(CIRCUITPY__EVE)
|
|
|
|
CIRCUITPY_FLOPPYIO ?= 0
|
|
CFLAGS += -DCIRCUITPY_FLOPPYIO=$(CIRCUITPY_FLOPPYIO)
|
|
|
|
CIRCUITPY_FREQUENCYIO ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_FREQUENCYIO=$(CIRCUITPY_FREQUENCYIO)
|
|
|
|
CIRCUITPY_FUTURE ?= 1
|
|
CFLAGS += -DCIRCUITPY_FUTURE=$(CIRCUITPY_FUTURE)
|
|
|
|
CIRCUITPY_GETPASS ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_GETPASS=$(CIRCUITPY_GETPASS)
|
|
|
|
ifeq ($(CIRCUITPY_DISPLAYIO),1)
|
|
#CIRCUITPY_GIFIO ?= $(CIRCUITPY_CAMERA)
|
|
CIRCUITPY_GIFIO ?= 1
|
|
else
|
|
CIRCUITPY_GIFIO ?= 0
|
|
endif
|
|
CFLAGS += -DCIRCUITPY_GIFIO=$(CIRCUITPY_GIFIO)
|
|
|
|
CIRCUITPY_GNSS ?= 0
|
|
CFLAGS += -DCIRCUITPY_GNSS=$(CIRCUITPY_GNSS)
|
|
|
|
CIRCUITPY_HASHLIB ?= $(CIRCUITPY_WEB_WORKFLOW)
|
|
CFLAGS += -DCIRCUITPY_HASHLIB=$(CIRCUITPY_HASHLIB)
|
|
|
|
CIRCUITPY_I2CTARGET ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_I2CTARGET=$(CIRCUITPY_I2CTARGET)
|
|
|
|
CIRCUITPY_IMAGECAPTURE ?= 0
|
|
CFLAGS += -DCIRCUITPY_IMAGECAPTURE=$(CIRCUITPY_IMAGECAPTURE)
|
|
|
|
# io - needed by JSON support
|
|
CIRCUITPY_IO ?= $(CIRCUITPY_JSON)
|
|
CFLAGS += -DCIRCUITPY_IO=$(CIRCUITPY_IO)
|
|
|
|
CIRCUITPY_IPADDRESS ?= $(CIRCUITPY_WIFI)
|
|
CFLAGS += -DCIRCUITPY_IPADDRESS=$(CIRCUITPY_IPADDRESS)
|
|
|
|
CIRCUITPY_IS31FL3741 ?= 0
|
|
CFLAGS += -DCIRCUITPY_IS31FL3741=$(CIRCUITPY_IS31FL3741)
|
|
|
|
CIRCUITPY_JSON ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_JSON=$(CIRCUITPY_JSON)
|
|
|
|
CIRCUITPY_KEYPAD ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_KEYPAD=$(CIRCUITPY_KEYPAD)
|
|
|
|
CIRCUITPY_MATH ?= 1
|
|
CFLAGS += -DCIRCUITPY_MATH=$(CIRCUITPY_MATH)
|
|
|
|
CIRCUITPY_MEMORYMAP ?= 0
|
|
CFLAGS += -DCIRCUITPY_MEMORYMAP=$(CIRCUITPY_MEMORYMAP)
|
|
|
|
CIRCUITPY_MEMORYMONITOR ?= 0
|
|
CFLAGS += -DCIRCUITPY_MEMORYMONITOR=$(CIRCUITPY_MEMORYMONITOR)
|
|
|
|
CIRCUITPY_MICROCONTROLLER ?= 1
|
|
CFLAGS += -DCIRCUITPY_MICROCONTROLLER=$(CIRCUITPY_MICROCONTROLLER)
|
|
|
|
CIRCUITPY_MDNS ?= $(CIRCUITPY_WIFI)
|
|
CFLAGS += -DCIRCUITPY_MDNS=$(CIRCUITPY_MDNS)
|
|
|
|
CIRCUITPY_MSGPACK ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_MSGPACK=$(CIRCUITPY_MSGPACK)
|
|
|
|
CIRCUITPY_NEOPIXEL_WRITE ?= 1
|
|
CFLAGS += -DCIRCUITPY_NEOPIXEL_WRITE=$(CIRCUITPY_NEOPIXEL_WRITE)
|
|
|
|
CIRCUITPY_NVM ?= 1
|
|
CFLAGS += -DCIRCUITPY_NVM=$(CIRCUITPY_NVM)
|
|
|
|
CIRCUITPY_ONEWIREIO ?= $(CIRCUITPY_BUSIO)
|
|
CFLAGS += -DCIRCUITPY_ONEWIREIO=$(CIRCUITPY_ONEWIREIO)
|
|
|
|
CIRCUITPY_OPT_LOAD_ATTR_FAST_PATH ?= 1
|
|
CFLAGS += -DCIRCUITPY_OPT_LOAD_ATTR_FAST_PATH=$(CIRCUITPY_OPT_LOAD_ATTR_FAST_PATH)
|
|
|
|
CIRCUITPY_OPT_MAP_LOOKUP_CACHE ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_OPT_MAP_LOOKUP_CACHE=$(CIRCUITPY_OPT_MAP_LOOKUP_CACHE)
|
|
|
|
CIRCUITPY_OS ?= 1
|
|
CFLAGS += -DCIRCUITPY_OS=$(CIRCUITPY_OS)
|
|
|
|
CIRCUITPY_PEW ?= 0
|
|
CFLAGS += -DCIRCUITPY_PEW=$(CIRCUITPY_PEW)
|
|
|
|
CIRCUITPY_PIXELBUF ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_PIXELBUF=$(CIRCUITPY_PIXELBUF)
|
|
|
|
CIRCUITPY_PIXELMAP ?= $(CIRCUITPY_PIXELBUF)
|
|
CFLAGS += -DCIRCUITPY_PIXELMAP=$(CIRCUITPY_PIXELMAP)
|
|
|
|
# Only for SAMD boards for the moment
|
|
CIRCUITPY_PS2IO ?= 0
|
|
CFLAGS += -DCIRCUITPY_PS2IO=$(CIRCUITPY_PS2IO)
|
|
|
|
CIRCUITPY_PULSEIO ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_PULSEIO=$(CIRCUITPY_PULSEIO)
|
|
|
|
CIRCUITPY_PWMIO ?= 1
|
|
CFLAGS += -DCIRCUITPY_PWMIO=$(CIRCUITPY_PWMIO)
|
|
|
|
CIRCUITPY_QRIO ?= $(CIRCUITPY_IMAGECAPTURE)
|
|
CFLAGS += -DCIRCUITPY_QRIO=$(CIRCUITPY_QRIO)
|
|
|
|
CIRCUITPY_RAINBOWIO ?= 1
|
|
CFLAGS += -DCIRCUITPY_RAINBOWIO=$(CIRCUITPY_RAINBOWIO)
|
|
|
|
CIRCUITPY_RANDOM ?= 1
|
|
CFLAGS += -DCIRCUITPY_RANDOM=$(CIRCUITPY_RANDOM)
|
|
|
|
CIRCUITPY_RE ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_RE=$(CIRCUITPY_RE)
|
|
|
|
# Should busio.I2C() check for pullups?
|
|
# Some boards in combination with certain peripherals may not want this.
|
|
CIRCUITPY_REQUIRE_I2C_PULLUPS ?= 1
|
|
CFLAGS += -DCIRCUITPY_REQUIRE_I2C_PULLUPS=$(CIRCUITPY_REQUIRE_I2C_PULLUPS)
|
|
|
|
# CIRCUITPY_RP2PIO is handled in the raspberrypi tree.
|
|
# Only for rp2 chips.
|
|
# Assume not a rp2 build.
|
|
CIRCUITPY_RP2PIO ?= 0
|
|
CFLAGS += -DCIRCUITPY_RP2PIO=$(CIRCUITPY_RP2PIO)
|
|
|
|
CIRCUITPY_RGBMATRIX ?= 0
|
|
CFLAGS += -DCIRCUITPY_RGBMATRIX=$(CIRCUITPY_RGBMATRIX)
|
|
|
|
CIRCUITPY_ROTARYIO ?= 1
|
|
CFLAGS += -DCIRCUITPY_ROTARYIO=$(CIRCUITPY_ROTARYIO)
|
|
|
|
CIRCUITPY_ROTARYIO_SOFTENCODER ?= 0
|
|
CFLAGS += -DCIRCUITPY_ROTARYIO_SOFTENCODER=$(CIRCUITPY_ROTARYIO_SOFTENCODER)
|
|
|
|
CIRCUITPY_RTC ?= 1
|
|
CFLAGS += -DCIRCUITPY_RTC=$(CIRCUITPY_RTC)
|
|
|
|
# Enable support for safemode.py
|
|
CIRCUITPY_SAFEMODE_PY ?= 1
|
|
CFLAGS += -DCIRCUITPY_SAFEMODE_PY=$(CIRCUITPY_SAFEMODE_PY)
|
|
|
|
# CIRCUITPY_SAMD is handled in the atmel-samd tree.
|
|
# Only for SAMD chips.
|
|
# Assume not a SAMD build.
|
|
CIRCUITPY_SAMD ?= 0
|
|
CFLAGS += -DCIRCUITPY_SAMD=$(CIRCUITPY_SAMD)
|
|
|
|
CIRCUITPY_SDCARDIO ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_SDCARDIO=$(CIRCUITPY_SDCARDIO)
|
|
|
|
CIRCUITPY_SDIOIO ?= 0
|
|
CFLAGS += -DCIRCUITPY_SDIOIO=$(CIRCUITPY_SDIOIO)
|
|
|
|
CIRCUITPY_SERIAL_BLE ?= 0
|
|
CFLAGS += -DCIRCUITPY_SERIAL_BLE=$(CIRCUITPY_SERIAL_BLE)
|
|
|
|
CIRCUITPY_SETTABLE_PROCESSOR_FREQUENCY?= 0
|
|
CFLAGS += -DCIRCUITPY_SETTABLE_PROCESSOR_FREQUENCY=$(CIRCUITPY_SETTABLE_PROCESSOR_FREQUENCY)
|
|
|
|
CIRCUITPY_SHARPDISPLAY ?= $(CIRCUITPY_FRAMEBUFFERIO)
|
|
CFLAGS += -DCIRCUITPY_SHARPDISPLAY=$(CIRCUITPY_SHARPDISPLAY)
|
|
|
|
# Disable the safe mode blink at boot. Speeds up boot time, but makes it
|
|
# impossible to enter safe mode by pressing buttons on boot.
|
|
CIRCUITPY_SKIP_SAFE_MODE_WAIT ?= 0
|
|
CFLAGS += -DCIRCUITPY_SKIP_SAFE_MODE_WAIT=$(CIRCUITPY_SKIP_SAFE_MODE_WAIT)
|
|
|
|
CIRCUITPY_SOCKETPOOL ?= $(CIRCUITPY_WIFI)
|
|
CFLAGS += -DCIRCUITPY_SOCKETPOOL=$(CIRCUITPY_SOCKETPOOL)
|
|
|
|
CIRCUITPY_SSL ?= $(CIRCUITPY_WIFI)
|
|
CFLAGS += -DCIRCUITPY_SSL=$(CIRCUITPY_SSL)
|
|
|
|
CIRCUITPY_SSL_MBEDTLS ?= 0
|
|
CFLAGS += -DCIRCUITPY_SSL_MBEDTLS=$(CIRCUITPY_SSL_MBEDTLS)
|
|
|
|
# Currently always off.
|
|
CIRCUITPY_STAGE ?= 0
|
|
CFLAGS += -DCIRCUITPY_STAGE=$(CIRCUITPY_STAGE)
|
|
|
|
CIRCUITPY_STATUS_BAR ?= 1
|
|
CFLAGS += -DCIRCUITPY_STATUS_BAR=$(CIRCUITPY_STATUS_BAR)
|
|
|
|
CIRCUITPY_STORAGE ?= 1
|
|
CFLAGS += -DCIRCUITPY_STORAGE=$(CIRCUITPY_STORAGE)
|
|
|
|
CIRCUITPY_STORAGE_EXTEND ?= $(CIRCUITPY_DUALBANK)
|
|
CFLAGS += -DCIRCUITPY_STORAGE_EXTEND=$(CIRCUITPY_STORAGE_EXTEND)
|
|
|
|
CIRCUITPY_STRUCT ?= 1
|
|
CFLAGS += -DCIRCUITPY_STRUCT=$(CIRCUITPY_STRUCT)
|
|
|
|
CIRCUITPY_SUPERVISOR ?= 1
|
|
CFLAGS += -DCIRCUITPY_SUPERVISOR=$(CIRCUITPY_SUPERVISOR)
|
|
|
|
CIRCUITPY_SYNTHIO ?= $(CIRCUITPY_AUDIOCORE)
|
|
CFLAGS += -DCIRCUITPY_SYNTHIO=$(CIRCUITPY_SYNTHIO)
|
|
|
|
CIRCUITPY_SYS ?= 1
|
|
CFLAGS += -DCIRCUITPY_SYS=$(CIRCUITPY_SYS)
|
|
|
|
CIRCUITPY_TERMINALIO ?= $(CIRCUITPY_DISPLAYIO)
|
|
CFLAGS += -DCIRCUITPY_TERMINALIO=$(CIRCUITPY_TERMINALIO)
|
|
|
|
ifeq ($(CIRCUITPY_DISPLAYIO),1)
|
|
CIRCUITPY_FONTIO ?= $(CIRCUITPY_TERMINALIO)
|
|
endif
|
|
CFLAGS += -DCIRCUITPY_FONTIO=$(CIRCUITPY_FONTIO)
|
|
|
|
CIRCUITPY_TIME ?= 1
|
|
CFLAGS += -DCIRCUITPY_TIME=$(CIRCUITPY_TIME)
|
|
|
|
# touchio might be native or generic. See circuitpy_defns.mk.
|
|
CIRCUITPY_TOUCHIO_USE_NATIVE ?= 0
|
|
CFLAGS += -DCIRCUITPY_TOUCHIO_USE_NATIVE=$(CIRCUITPY_TOUCHIO_USE_NATIVE)
|
|
|
|
CIRCUITPY_TOUCHIO ?= 1
|
|
CFLAGS += -DCIRCUITPY_TOUCHIO=$(CIRCUITPY_TOUCHIO)
|
|
|
|
CIRCUITPY_TRACEBACK ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_TRACEBACK=$(CIRCUITPY_TRACEBACK)
|
|
|
|
# For debugging.
|
|
CIRCUITPY_UHEAP ?= 0
|
|
CFLAGS += -DCIRCUITPY_UHEAP=$(CIRCUITPY_UHEAP)
|
|
|
|
CIRCUITPY_USB ?= 1
|
|
CFLAGS += -DCIRCUITPY_USB=$(CIRCUITPY_USB)
|
|
|
|
# Compute these value once, so the shell command is not reinvoked many times.
|
|
USB_NUM_ENDPOINT_PAIRS_5_OR_GREATER := $(shell expr $(USB_NUM_ENDPOINT_PAIRS) '>=' 5)
|
|
USB_NUM_ENDPOINT_PAIRS_8_OR_GREATER := $(shell expr $(USB_NUM_ENDPOINT_PAIRS) '>=' 8)
|
|
|
|
# Some chips may not support the same number of IN or OUT endpoints as pairs.
|
|
# For instance, the ESP32-S2 only supports 5 IN endpoints at once, even though
|
|
# it has 7 endpoint pairs.
|
|
USB_NUM_IN_ENDPOINTS ?= $(USB_NUM_ENDPOINT_PAIRS)
|
|
CFLAGS += -DUSB_NUM_IN_ENDPOINTS=$(USB_NUM_IN_ENDPOINTS)
|
|
|
|
USB_NUM_OUT_ENDPOINTS ?= $(USB_NUM_ENDPOINT_PAIRS)
|
|
CFLAGS += -DUSB_NUM_OUT_ENDPOINTS=$(USB_NUM_OUT_ENDPOINTS)
|
|
|
|
CIRCUITPY_USB_CDC ?= $(CIRCUITPY_USB)
|
|
CFLAGS += -DCIRCUITPY_USB_CDC=$(CIRCUITPY_USB_CDC)
|
|
CIRCUITPY_USB_CDC_CONSOLE_ENABLED_DEFAULT ?= 1
|
|
CFLAGS += -DCIRCUITPY_USB_CDC_CONSOLE_ENABLED_DEFAULT=$(CIRCUITPY_USB_CDC_CONSOLE_ENABLED_DEFAULT)
|
|
CIRCUITPY_USB_CDC_DATA_ENABLED_DEFAULT ?= 0
|
|
CFLAGS += -DCIRCUITPY_USB_CDC_DATA_ENABLED_DEFAULT=$(CIRCUITPY_USB_CDC_DATA_ENABLED_DEFAULT)
|
|
|
|
# HID is available by default, but is not turned on if there are fewer than 5 endpoints.
|
|
CIRCUITPY_USB_HID ?= $(CIRCUITPY_USB)
|
|
CFLAGS += -DCIRCUITPY_USB_HID=$(CIRCUITPY_USB_HID)
|
|
CIRCUITPY_USB_HID_ENABLED_DEFAULT ?= $(USB_NUM_ENDPOINT_PAIRS_5_OR_GREATER)
|
|
CFLAGS += -DCIRCUITPY_USB_HID_ENABLED_DEFAULT=$(CIRCUITPY_USB_HID_ENABLED_DEFAULT)
|
|
|
|
CIRCUITPY_USB_HOST ?= 0
|
|
CFLAGS += -DCIRCUITPY_USB_HOST=$(CIRCUITPY_USB_HOST)
|
|
|
|
CIRCUITPY_USB_IDENTIFICATION ?= $(CIRCUITPY_USB)
|
|
CFLAGS += -DCIRCUITPY_USB_IDENTIFICATION=$(CIRCUITPY_USB_IDENTIFICATION)
|
|
|
|
# MIDI is available by default, but is not turned on if there are fewer than 8 endpoints.
|
|
CIRCUITPY_USB_MIDI ?= $(CIRCUITPY_USB)
|
|
CFLAGS += -DCIRCUITPY_USB_MIDI=$(CIRCUITPY_USB_MIDI)
|
|
CIRCUITPY_USB_MIDI_ENABLED_DEFAULT ?= $(USB_NUM_ENDPOINT_PAIRS_8_OR_GREATER)
|
|
CFLAGS += -DCIRCUITPY_USB_MIDI_ENABLED_DEFAULT=$(CIRCUITPY_USB_MIDI_ENABLED_DEFAULT)
|
|
|
|
CIRCUITPY_USB_MSC ?= $(CIRCUITPY_USB)
|
|
CFLAGS += -DCIRCUITPY_USB_MSC=$(CIRCUITPY_USB_MSC)
|
|
CIRCUITPY_USB_MSC_ENABLED_DEFAULT ?= $(CIRCUITPY_USB_MSC)
|
|
CFLAGS += -DCIRCUITPY_USB_MSC_ENABLED_DEFAULT=$(CIRCUITPY_USB_MSC_ENABLED_DEFAULT)
|
|
|
|
# Defaulting this to OFF initially because it has only been tested on a
|
|
# limited number of platforms, and the other platforms do not have this
|
|
# setting in their mpconfigport.mk and/or mpconfigboard.mk files yet.
|
|
CIRCUITPY_USB_VENDOR ?= 0
|
|
CFLAGS += -DCIRCUITPY_USB_VENDOR=$(CIRCUITPY_USB_VENDOR)
|
|
|
|
ifndef USB_NUM_ENDPOINT_PAIRS
|
|
$(error "USB_NUM_ENDPOINT_PAIRS (number of USB endpoint pairs)must be defined")
|
|
endif
|
|
CFLAGS += -DUSB_NUM_ENDPOINT_PAIRS=$(USB_NUM_ENDPOINT_PAIRS)
|
|
|
|
# For debugging.
|
|
CIRCUITPY_USTACK ?= 0
|
|
CFLAGS += -DCIRCUITPY_USTACK=$(CIRCUITPY_USTACK)
|
|
|
|
# for decompressing utlities
|
|
CIRCUITPY_ZLIB ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_ZLIB=$(CIRCUITPY_ZLIB)
|
|
|
|
# ulab numerics library
|
|
CIRCUITPY_ULAB ?= $(CIRCUITPY_FULL_BUILD)
|
|
CFLAGS += -DCIRCUITPY_ULAB=$(CIRCUITPY_ULAB)
|
|
|
|
# CIRCUITPY_VIDEOCORE is handled in the broadcom tree.
|
|
# Only for Broadcom chips.
|
|
# Assume not a Broadcom build.
|
|
CIRCUITPY_VIDEOCORE ?= 0
|
|
CFLAGS += -DCIRCUITPY_VIDEOCORE=$(CIRCUITPY_VIDEOCORE)
|
|
|
|
# watchdog hardware support
|
|
CIRCUITPY_WATCHDOG ?= 0
|
|
CFLAGS += -DCIRCUITPY_WATCHDOG=$(CIRCUITPY_WATCHDOG)
|
|
|
|
CIRCUITPY_WIFI ?= 0
|
|
CFLAGS += -DCIRCUITPY_WIFI=$(CIRCUITPY_WIFI)
|
|
|
|
CIRCUITPY_WEB_WORKFLOW ?= $(CIRCUITPY_WIFI)
|
|
CFLAGS += -DCIRCUITPY_WEB_WORKFLOW=$(CIRCUITPY_WEB_WORKFLOW)
|
|
|
|
CIRCUITPY_WIFI_RADIO_SETTABLE_MAC_ADDRESS?= 1
|
|
CFLAGS += -DCIRCUITPY_WIFI_RADIO_SETTABLE_MAC_ADDRESS=$(CIRCUITPY_WIFI_RADIO_SETTABLE_MAC_ADDRESS)
|
|
|
|
# tinyusb port tailored configuration
|
|
CIRCUITPY_TUSB_MEM_ALIGN ?= 4
|
|
CFLAGS += -DCIRCUITPY_TUSB_MEM_ALIGN=$(CIRCUITPY_TUSB_MEM_ALIGN)
|
|
|
|
CIRCUITPY_TUSB_ATTR_USBRAM ?= ".bss.usbram"
|
|
CFLAGS += -DCIRCUITPY_TUSB_ATTR_USBRAM=$(CIRCUITPY_TUSB_ATTR_USBRAM)
|
|
|
|
# Output function trace information from the ARM ITM.
|
|
CIRCUITPY_SWO_TRACE ?= 0
|
|
CFLAGS += -DCIRCUITPY_SWO_TRACE=$(CIRCUITPY_SWO_TRACE)
|
|
|
|
# Define an equivalent for MICROPY_LONGINT_IMPL, to pass to $(MPY-TOOL) in py/mkrules.mk
|
|
# $(MPY-TOOL) needs to know what kind of longint to use (if any) to freeze long integers.
|
|
# This should correspond to the MICROPY_LONGINT_IMPL definition in mpconfigport.h.
|
|
#
|
|
# Also propagate longint choice from .mk to C. There's no easy string comparison
|
|
# in cpp conditionals, so we #define separate names for each.
|
|
|
|
ifeq ($(LONGINT_IMPL),NONE)
|
|
MPY_TOOL_LONGINT_IMPL = -mlongint-impl=none
|
|
CFLAGS += -DLONGINT_IMPL_NONE
|
|
else ifeq ($(LONGINT_IMPL),MPZ)
|
|
MPY_TOOL_LONGINT_IMPL = -mlongint-impl=mpz
|
|
CFLAGS += -DLONGINT_IMPL_MPZ
|
|
else ifeq ($(LONGINT_IMPL),LONGLONG)
|
|
MPY_TOOL_LONGINT_IMPL = -mlongint-impl=longlong
|
|
CFLAGS += -DLONGINT_IMPL_LONGLONG
|
|
else
|
|
$(error LONGINT_IMPL set to surprising value: "$(LONGINT_IMPL)")
|
|
endif
|
|
MPY_TOOL_FLAGS += $(MPY_TOOL_LONGINT_IMPL)
|
|
|
|
###
|
|
ifeq ($(LONGINT_IMPL),NONE)
|
|
else ifeq ($(LONGINT_IMPL),MPZ)
|
|
else ifeq ($(LONGINT_IMPL),LONGLONG)
|
|
else
|
|
$(error LONGINT_IMPL set to surprising value: "$(LONGINT_IMPL)")
|
|
endif
|
|
|
|
PREPROCESS_FROZEN_MODULES = PYTHONPATH=$(TOP)/tools/python-semver $(TOP)/tools/preprocess_frozen_modules.py
|
|
ifneq ($(FROZEN_MPY_DIRS),)
|
|
$(BUILD)/frozen_mpy: $(FROZEN_MPY_DIRS)
|
|
$(ECHO) FREEZE $(FROZEN_MPY_DIRS)
|
|
$(Q)$(MKDIR) -p $@
|
|
$(Q)$(PREPROCESS_FROZEN_MODULES) -o $@ $(FROZEN_MPY_DIRS)
|
|
|
|
$(BUILD)/manifest.py: $(BUILD)/frozen_mpy | $(TOP)/py/circuitpy_mpconfig.mk mpconfigport.mk boards/$(BOARD)/mpconfigboard.mk
|
|
$(ECHO) MKMANIFEST $(FROZEN_MPY_DIRS)
|
|
(cd $(BUILD)/frozen_mpy && find * -name \*.py -exec printf 'freeze_as_mpy("frozen_mpy", "%s")\n' {} \; )> $@.tmp && mv -f $@.tmp $@
|
|
FROZEN_MANIFEST=$(BUILD)/manifest.py
|
|
endif
|