circuitpython/ports/cc3200/tools/smoke.py

79 lines
1.8 KiB
Python

from machine import Pin
from machine import RTC
import time
import os
"""
Execute it like this:
python3 run-tests.py --target wipy --device 192.168.1.1 ../cc3200/tools/smoke.py
"""
pin_map = [23, 24, 11, 12, 13, 14, 15, 16, 17, 22, 28, 10, 9, 8, 7, 6, 30, 31, 3, 0, 4, 5]
test_bytes = os.urandom(1024)
def test_pin_read(pull):
# enable the pull resistor on all pins, then read the value
for p in pin_map:
pin = Pin("GP" + str(p), mode=Pin.IN, pull=pull)
# read the pin value
print(pin())
def test_pin_shorts(pull):
if pull == Pin.PULL_UP:
pull_inverted = Pin.PULL_DOWN
else:
pull_inverted = Pin.PULL_UP
# enable all pulls of the specified type
for p in pin_map:
pin = Pin("GP" + str(p), mode=Pin.IN, pull=pull_inverted)
# then change the pull one pin at a time and read its value
i = 0
while i < len(pin_map):
pin = Pin("GP" + str(pin_map[i]), mode=Pin.IN, pull=pull)
Pin("GP" + str(pin_map[i - 1]), mode=Pin.IN, pull=pull_inverted)
i += 1
# read the pin value
print(pin())
test_pin_read(Pin.PULL_UP)
test_pin_read(Pin.PULL_DOWN)
test_pin_shorts(Pin.PULL_UP)
test_pin_shorts(Pin.PULL_DOWN)
# create a test directory
os.mkdir("/flash/test")
os.chdir("/flash/test")
print(os.getcwd())
# create a new file
f = open("test.txt", "w")
n_w = f.write(test_bytes)
print(n_w == len(test_bytes))
f.close()
f = open("test.txt", "r")
r = bytes(f.read(), "ascii")
# check that we can write and read it correctly
print(r == test_bytes)
f.close()
os.remove("test.txt")
os.chdir("..")
os.rmdir("test")
ls = os.listdir()
print("test" not in ls)
print(ls)
# test the real time clock
rtc = RTC()
while rtc.now()[6] > 800:
pass
time1 = rtc.now()
time.sleep_ms(1000)
time2 = rtc.now()
print(time2[5] - time1[5] == 1)
print(time2[6] - time1[6] < 5000) # microseconds