djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
circuitpython/atmel-samd/Makefile
Scott Shawcroft 062fac1d43 atmel-samd: Use link time optimization to reduce code size of builds which 
share space with the file system.

"Express" builds with SPI flash crash the compiler for some reason so its
currently disabled for them.
2017-02-26 01:00:33 +01:00

285 lines
8.2 KiB
Makefile
Raw Blame History

# Select the board to build for: if not given on the command line,
# then default to PYBV10.
BOARD ?= arduino_zero
ifeq ($(wildcard boards/$(BOARD)/.),)
$(error Invalid BOARD specified)
endif
# If the build directory is not given, make it reflect the board name.
BUILD ?= build-$(BOARD)
include ../py/mkenv.mk
-include mpconfigport.mk
include boards/$(BOARD)/mpconfigboard.mk
# qstr definitions (must come before including py.mk)
# TODO(tannewt): Support friendly pin names like the stmhal implementations do.
# Add $(BUILD)/pins_qstr.h $(BUILD)/modstm_qstr.h
QSTR_DEFS = qstrdefsport.h
# include py core make definitions
include ../py/py.mk
CROSS_COMPILE = arm-none-eabi-
BOSSAC := tools/bossac_osx
HAL_DIR=hal/$(MCU_SERIES)
INC += -I.
INC += -I..
INC += -I../lib/mp-readline
INC += -I../lib/timeutils
INC += -Iasf_conf/
INC += -Iasf/common/boards/
INC += -Iasf/common/services/sleepmgr/
INC += -Iasf/common/services/storage/ctrl_access/
INC += -Iasf/common/services/usb/
INC += -Iasf/common/services/usb/class/cdc/
INC += -Iasf/common/services/usb/class/cdc/device/
INC += -Iasf/common/services/usb/class/msc/
INC += -Iasf/common/services/usb/class/msc/device/
INC += -Iasf/common/services/usb/udc/
INC += -Iasf/common/utils
INC += -Iasf/common2/services/delay/
INC += $(addprefix -Iasf/sam0/,\
drivers/extint/ \
drivers/port \
drivers/system \
drivers/adc/adc_sam_d_r \
drivers/dac \
drivers/dac/dac_sam_d_c \
drivers/sercom \
drivers/sercom/i2c \
drivers/system/clock \
drivers/system/clock/clock_samd21_r21_da \
drivers/system/interrupt \
drivers/system/interrupt/system_interrupt_samd21 \
drivers/system/pinmux \
drivers/system/power/power_sam_d_r \
drivers/system/reset/reset_sam_d_r \
drivers/tc \
drivers/usb \
utils \
utils/cmsis/samd21/include \
utils/cmsis/samd21/source \
utils/header_files \
utils/preprocessor \
)
INC += -Iasf/thirdparty/CMSIS/Include
INC += -Iboards/$(BOARD)/
INC += -I$(BUILD)
CFLAGS_CORTEX_M0 = \
-mthumb \
-mabi=aapcs-linux \
-mcpu=cortex-m0plus \
-msoft-float \
-mfloat-abi=soft \
-fsingle-precision-constant \
-fno-strict-aliasing \
-Wdouble-promotion \
-Wno-endif-labels \
-Wstrict-prototypes \
-Werror-implicit-function-declaration \
-Wpointer-arith \
-Wfloat-equal \
-Wundef \
-Wshadow \
-Wwrite-strings \
-Wsign-compare \
-Wmissing-format-attribute \
-Wno-deprecated-declarations \
-Wpacked \
-Wnested-externs \
-Wunreachable-code \
-Wcast-align \
-D__$(CHIP_VARIANT)__ \
-DUSB_DEVICE_PRODUCT_ID=$(USB_PID) \
-DUSB_DEVICE_VENDOR_ID=$(USB_VID) \
-DBOARD=USER_BOARD \
-ffunction-sections \
-fdata-sections \
-fshort-enums \
-D ARM_MATH_CM0PLUS=true \
-DSYSTICK_MODE \
-DEXTINT_CALLBACK_MODE=true \
-DUDD_ENABLE \
-DUSART_CALLBACK_MODE=false \
-DSPI_CALLBACK_MODE=false \
-DI2C_MASTER_CALLBACK_MODE=false \
-DDAC_CALLBACK_MODE=false \
-DTCC_ASYNC=false \
-DADC_CALLBACK_MODE=false \
-DTC_ASYNC=true \
-DUSB_DEVICE_LPM_SUPPORT \
--param max-inline-insns-single=500
CFLAGS = $(INC) -Wall -Werror -std=gnu11 -nostdlib $(CFLAGS_CORTEX_M0) $(COPT) $(BOARD_CFLAGS)
#Debugging/Optimization
# TODO(tannewt): Figure out what NDEBUG does. Adding it to the debug build
# reduces code size pretty dramatically.
ifeq ($(DEBUG), 1)
CFLAGS += -Os -ggdb -DNDEBUG -DENABLE_MICRO_TRACE_BUFFER
else
CFLAGS += -Os -DNDEBUG
endif
ifneq ($(FROZEN_DIR),)
# To use frozen source modules, put your .py files in a subdirectory (eg scripts/)
# and then invoke make with FROZEN_DIR=scripts (be sure to build from scratch).
CFLAGS += -DMICROPY_MODULE_FROZEN_STR
endif
ifneq ($(FROZEN_MPY_DIR),)
# To use frozen bytecode, put your .py files in a subdirectory (eg frozen/) and
# then invoke make with FROZEN_MPY_DIR=frozen (be sure to build from scratch).
CFLAGS += -DMICROPY_QSTR_EXTRA_POOL=mp_qstr_frozen_const_pool
CFLAGS += -DMICROPY_MODULE_FROZEN_MPY
endif
#LIBM_FILE_NAME = $(shell $(CC) $(CFLAGS) -print-file-name=libm.a)
LDFLAGS = $(CFLAGS) -nostartfiles -fshort-enums -mthumb -mcpu=cortex-m0plus -Lasf/thirdparty/CMSIS/Lib/GCC/ -LQTouch/ -Wl,-nostdlib -Wl,-T,$(LD_FILE) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections -specs=nano.specs
LIBS = -larm_cortexM0l_math -lsamd21_qtouch_gcc -lm -lgcc -lc
SRC_ASF = $(addprefix asf/sam0/,\
drivers/adc/adc_sam_d_r/adc.c \
drivers/dac/dac_sam_d_c/dac.c \
drivers/nvm/nvm.c \
drivers/port/port.c \
drivers/sercom/i2c/i2c_sam0/i2c_master.c \
drivers/sercom/sercom.c \
drivers/sercom/sercom_interrupt.c \
drivers/sercom/spi/spi.c \
drivers/sercom/usart/usart.c \
drivers/system/clock/clock_samd21_r21_da/clock.c \
drivers/system/clock/clock_samd21_r21_da/gclk.c \
drivers/system/interrupt/system_interrupt.c \
drivers/system/pinmux/pinmux.c \
drivers/system/system.c \
drivers/tc/tc_interrupt.c \
drivers/tc/tc_sam_d_r/tc.c \
drivers/tcc/tcc.c \
drivers/usb/stack_interface/usb_device_udd.c \
drivers/usb/stack_interface/usb_dual.c \
drivers/usb/usb_sam_d_r/usb.c \
)
SRC_C = \
access_vfs.c \
autoreset.c \
builtin_open.c \
fatfs_port.c \
main.c \
moduos.c \
mphalport.c \
samd21_pins.c \
rgb_led_status.c \
tick.c \
$(FLASH_IMPL) \
bindings/samd/__init__.c \
asf/common/services/sleepmgr/samd/sleepmgr.c \
asf/common/services/storage/ctrl_access/ctrl_access.c \
asf/common/services/usb/class/cdc/device/udi_cdc.c \
asf/common/services/usb/class/composite/device/udi_composite_desc.c \
asf/common/services/usb/class/msc/device/udi_msc.c \
asf/common/services/usb/udc/udc.c \
asf/common/utils/interrupt/interrupt_sam_nvic.c \
asf/common2/services/delay/sam0/systick_counter.c \
asf/sam0/utils/cmsis/samd21/source/gcc/startup_samd21.c \
asf/sam0/utils/cmsis/samd21/source/system_samd21.c \
asf/sam0/utils/syscalls/gcc/syscalls.c \
boards/$(BOARD)/init.c \
boards/$(BOARD)/pins.c \
lib/fatfs/ff.c \
lib/fatfs/option/ccsbcs.c \
lib/timeutils/timeutils.c \
lib/utils/context_manager_helpers.c \
lib/utils/interrupt_char.c \
lib/utils/pyexec.c \
lib/utils/pyhelp.c \
lib/utils/stdout_helpers.c \
lib/libc/string0.c \
lib/mp-readline/readline.c
STM_SRC_C = $(addprefix stmhal/,\
pybstdio.c \
input.c \
)
SRC_BINDINGS = \
board/__init__.c \
microcontroller/__init__.c \
microcontroller/Pin.c \
nativeio/__init__.c \
nativeio/AnalogIn.c \
nativeio/AnalogOut.c \
nativeio/DigitalInOut.c \
nativeio/I2C.c \
nativeio/PWMOut.c \
nativeio/SPI.c \
nativeio/UART.c \
neopixel_write/__init__.c \
time/__init__.c
SRC_BINDINGS_EXPANDED = $(addprefix shared-bindings/, $(SRC_BINDINGS)) \
$(addprefix common-hal/, $(SRC_BINDINGS))
# Handle touch support on its own since it only fits in the image when external
# flash is used to store the file system.
SRC_BINDINGS_EXPANDED += shared-bindings/nativeio/TouchIn.c
ifeq ($(FLASH_IMPL),internal_flash.c)
SRC_BINDINGS_EXPANDED += common-hal/nativeio/TouchInStub.c
else
SRC_BINDINGS_EXPANDED += common-hal/nativeio/TouchIn.c
endif
SRC_SHARED_MODULE = \
help.c \
bitbangio/__init__.c \
bitbangio/I2C.c \
bitbangio/SPI.c \
uheap/__init__.c \
SRC_SHARED_MODULE_EXPANDED = $(addprefix shared-bindings/, $(SRC_SHARED_MODULE)) \
$(addprefix shared-module/, $(SRC_SHARED_MODULE))
OBJ = $(PY_O) $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_ASF:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(STM_SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_BINDINGS_EXPANDED:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_SHARED_MODULE_EXPANDED:.c=.o))
SRC_QSTR += $(SRC_C) $(SRC_BINDINGS_EXPANDED) $(SRC_SHARED_MODULE_EXPANDED) $(STM_SRC_C)
all: $(BUILD)/firmware.bin
$(BUILD)/firmware.elf: $(OBJ)
$(STEPECHO) "LINK $@"
$(Q)$(CC) -o $@ $(LDFLAGS) $^ -Wl,--start-group $(LIBS) -Wl,--end-group
$(Q)$(SIZE) $@ | python3 ../tools/build_memory_info.py $(LD_FILE)
$(BUILD)/firmware.bin: $(BUILD)/firmware.elf
$(ECHO) "Create $@"
$(Q)$(OBJCOPY) -O binary -j .vectors -j .text -j .data $^ $@
deploy: $(BUILD)/firmware.bin
$(ECHO) "Writing $< to the board"
$(BOSSAC) -u $<
# Run emulation build on a POSIX system with suitable terminal settings
run:
stty raw opost -echo
build/firmware.elf
@echo Resetting terminal...
# This sleep is useful to spot segfaults
sleep 1
reset
test: $(BUILD)/firmware.elf
$(Q)/bin/echo -e "print('hello world!', list(x+1 for x in range(10)), end='eol\\\\n')\\r\\n\\x04" | $(BUILD)/firmware.elf | tail -n2 | grep "^hello world! \\[1, 2, 3, 4, 5, 6, 7, 8, 9, 10\\]eol"
include ../py/mkrules.mk
Reference in New Issue View Git Blame Copy Permalink