62 lines
2.1 KiB
ReStructuredText
62 lines
2.1 KiB
ReStructuredText
WLAN step by step
|
|
=================
|
|
|
|
The WLAN is a system feature of the WiPy, therefore it is always enabled
|
|
(even while in ``machine.SLEEP``), except when deepsleep mode is entered.
|
|
|
|
In order to retrieve the current WLAN instance, do::
|
|
|
|
>>> from network import WLAN
|
|
>>> wlan = WLAN() # we call the constructor without params
|
|
|
|
You can check the current mode (which is always ``WLAN.AP`` after power up)::
|
|
|
|
>>> wlan.mode()
|
|
|
|
Connecting to your home router
|
|
------------------------------
|
|
|
|
The WLAN network card always boots in ``WLAN.AP`` mode, so we must first configure
|
|
it as a station::
|
|
|
|
from network import WLAN
|
|
wlan = WLAN(mode=WLAN.STA)
|
|
|
|
Now you can proceed to scan for networks::
|
|
|
|
nets = wlan.scan()
|
|
for net in nets:
|
|
if net.ssid == 'mywifi':
|
|
print('Network found!')
|
|
wlan.connect(net.ssid, auth=(net.sec, 'mywifikey'), timeout=5000)
|
|
while not wlan.isconnected():
|
|
machine.idle() # save power while waiting
|
|
print('WLAN connection succeeded!)
|
|
break
|
|
|
|
Assigning a static IP address when booting
|
|
------------------------------------------
|
|
|
|
If you want your WiPy to connect to your home router while after boot-up, and with a fixed
|
|
IP address so that you can access it via telnet or FTP, use the following script::
|
|
|
|
import machine
|
|
from network import WLAN
|
|
wlan = WLAN() # get current object, without changing the mode
|
|
|
|
if machine.reset_cause() != machine.SOFT_RESET:
|
|
wlan.init(WLAN.STA)
|
|
# configuration below MUST match your home router settings!!
|
|
wlan.ifconfig(config=('192.168.178.107', '255.255.255.0', '192.168.178.1', '8.8.8.8'))
|
|
|
|
if not wlan.isconnected():
|
|
# change the line below to match your network ssid, security and password
|
|
wlan.connect('mywifi', auth=(WLAN.WPA2, 'mywifikey'), timeout=5000)
|
|
while not wlan.isconnected():
|
|
machine.idle() # save power while waiting
|
|
|
|
.. note::
|
|
|
|
Notice how we check for the reset cause and the connection status, this is crucial in order
|
|
to be able to soft reset the WiPy during a telnet session without breaking the connection.
|