Glenn Ruben Bakke 042e3653cf nrf5/hal: Adding support for NULL pointer to be set if no rx buffer is of interest in SPI rx_tx function.

2017-01-05 21:56:17 +01:00

..

hal_pwm.c

nrf5/hal: Fixing some issues in PWM stop function. Doing a proper stop and disable the peripheral.

2016-12-31 17:20:54 +01:00

hal_pwm.h

nrf5/hal: Exposing two new PWM hal functions start() and stop().

2016-12-31 17:06:07 +01:00

hal_rtc.c

nrf5/hal: Adding empty init function in hal_rtc.c

2016-12-26 16:49:27 +01:00

hal_rtc.h

nrf5/hal: Adding structures and init function prototype to hal_rtc.h.

2016-12-26 16:48:56 +01:00

hal_spi.c

nrf5/hal: Adding support for NULL pointer to be set if no rx buffer is of interest in SPI rx_tx function.

2017-01-05 21:56:17 +01:00

hal_spi.h

nrf5/spi: Removing automatic chip select (NSS) in hal_spi.c. Also removing configuration of this pin as it is confusing to pass it if not used. User of SPI has to set the NSS/CS itself.

2017-01-02 12:51:56 +01:00

hal_spie.c

nrf5/pin: Merging input and output pin configuration to one comon function. Adding implementation in Pin class to be able to configure mode and pull. Updating drivers which uses gpio pin configuration to use new function parameters.

2016-12-27 15:40:20 +01:00

hal_time.c

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

hal_time.h

nrf5: Adding sleep_us to modutime.c and exposing mp_hal_delay_us in hal/hal_time.h

2017-01-03 21:15:53 +01:00

hal_timer.c

nrf5/hal: Adding empty init function in hal_timer.c

2016-12-26 16:08:59 +01:00

hal_timer.h

nrf5/hal: Adding structures and init function prototype to hal_timer.h.

2016-12-26 16:08:22 +01:00

hal_uart.c

nrf5/pin: Merging input and output pin configuration to one comon function. Adding implementation in Pin class to be able to configure mode and pull. Updating drivers which uses gpio pin configuration to use new function parameters.

2016-12-27 15:40:20 +01:00

hal_uart.h

Base support for nrf51 and nrf52 base without depending on SDK. SoftDevice usage optional.

2016-11-16 21:38:25 +01:00

hal_uarte.c

nrf5/pin: Merging input and output pin configuration to one comon function. Adding implementation in Pin class to be able to configure mode and pull. Updating drivers which uses gpio pin configuration to use new function parameters.

2016-12-27 15:40:20 +01:00

nrf51_hal.h

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

nrf52_hal.h

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00