circuitpython/ports/espressif/boards/adafruit_esp32s3_camera/sdkconfig
Jeff Epler c516870f89
switch camera to use the no-ota partition scheme
this gives us a comfortable few hundred kB flash space left for the app

1398912 bytes used,  763776 bytes free in flash firmware space out of 2162688 bytes (2112.0kB).
2023-07-26 08:38:59 -05:00

63 lines
1.5 KiB
Plaintext

# Component config
#
#
# ESP32S3-Specific
#
CONFIG_ESP32S3_SPIRAM_SUPPORT=y
#
# SPI RAM config
#
CONFIG_SPIRAM_MODE_QUAD=y
# CONFIG_SPIRAM_MODE_OCT is not set
CONFIG_SPIRAM_TYPE_AUTO=y
# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set
# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set
# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set
CONFIG_SPIRAM_SIZE=2097152
#
# PSRAM Clock and CS IO for ESP32S3
#
CONFIG_DEFAULT_PSRAM_CLK_IO=30
CONFIG_DEFAULT_PSRAM_CS_IO=26
# end of PSRAM Clock and CS IO for ESP32S3
# CONFIG_SPIRAM_FETCH_INSTRUCTIONS is not set
# CONFIG_SPIRAM_RODATA is not set
# CONFIG_SPIRAM_SPEED_80M is not set
CONFIG_SPIRAM_SPEED_80M=y
# CONFIG_SPIRAM_SPEED_26M is not set
# CONFIG_SPIRAM_SPEED_20M is not set
CONFIG_SPIRAM=y
CONFIG_SPIRAM_BOOT_INIT=y
# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set
CONFIG_SPIRAM_USE_MEMMAP=y
# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set
# CONFIG_SPIRAM_USE_MALLOC is not set
CONFIG_SPIRAM_MEMTEST=y
# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set
# end of SPI RAM config
# end of ESP32S3-Specific
#
# LWIP
#
CONFIG_LWIP_LOCAL_HOSTNAME="espressif-esp32s3"
# end of LWIP
# CONFIG_OV7670_SUPPORT is not set
# CONFIG_NT99141_SUPPORT is not set
CONFIG_OV3360_SUPPORT=n
# CONFIG_OV2640_SUPPORT is not set
CONFIG_OV5640_SUPPORT=y
# CONFIG_GC2145_SUPPORT is not set
# CONFIG_GC032A_SUPPORT is not set
# CONFIG_GC0308_SUPPORT is not set
# CONFIG_BF3005_SUPPORT is not set
# CONFIG_BF20A6_SUPPORT is not set
# CONFIG_SC101IOT_SUPPORT is not set
# CONFIG_SC030IOT_SUPPORT is not set
# end of Component config