djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
main
circuitpython/ports/mimxrt10xx/Makefile
Scott Shawcroft 8137e2d6d2
Switch all ports to auto-growing split heap 
This simplifies allocating outside of the VM because the VM doesn't
take up all remaining memory by default.

On ESP we delegate to the IDF for allocations. For all other ports,
we use TLSF to manage an outer "port" heap. The IDF uses TLSF
internally and we use their fork for the other ports.

This also removes the dynamic C stack sizing. It wasn't often used
and is not possible with a fixed outer heap.

Fixes #8512. Fixes #7334.
2023-11-01 15:24:16 -07:00

246 lines
8.4 KiB
Makefile
Raw Permalink Blame History

# This file is part of the MicroPython project, http://micropython.org/
#
# The MIT License (MIT)
#
# SPDX-FileCopyrightText: Copyright (c) 2019 Dan Halbert for Adafruit Industries
# SPDX-FileCopyrightText: Copyright (c) 2019 Artur Pacholec
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
include ../../py/circuitpy_mkenv.mk
CROSS_COMPILE = arm-none-eabi-
INC += \
-I. \
-I../.. \
-I../../lib/cmsis/inc \
-I../../lib/tinyusb/src \
-I../../supervisor/shared/usb \
-I$(BUILD) \
-Iboards \
-Iboards/$(BOARD) \
-Iperipherals/ \
-Iperipherals/mimxrt10xx/ \
-Isdk/CMSIS/Include/ \
-Isdk/devices/$(CHIP_FAMILY) \
-Isdk/devices/$(CHIP_FAMILY)/drivers \
-Isdk/drivers/common
# NDEBUG disables assert() statements. This reduces code size pretty dramatically, per tannewt.
CFLAGS += -ftree-vrp -DNDEBUG
# TinyUSB defines
CFLAGS += -DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX -DCFG_TUD_CDC_RX_BUFSIZE=512 -DCFG_TUD_CDC_TX_BUFSIZE=512
ifeq ($(CHIP_FAMILY),$(filter $(CHIP_FAMILY),MIMXRT1011 MIMXRT1015))
CFLAGS += -DCFG_TUD_MIDI_RX_BUFSIZE=512 -DCFG_TUD_MIDI_TX_BUFSIZE=64 -DCFG_TUD_MSC_BUFSIZE=512
else
CFLAGS += -DCFG_TUD_MIDI_RX_BUFSIZE=512 -DCFG_TUD_MIDI_TX_BUFSIZE=512 -DCFG_TUD_MSC_BUFSIZE=1024
endif
#Debugging/Optimization
# Never set -fno-inline because we use inline to move small functions into routines that must be
# in RAM. If inlining is disallowed, then we may end up calling a function in flash when we cannot.
ifeq ($(DEBUG), 1)
# You may want to enable these flags to make setting breakpoints easier.
CFLAGS += -fno-ipa-sra
endif
CFLAGS += $(INC) -ggdb -Wall -Werror -std=gnu11 -nostdlib -fshort-enums $(BASE_CFLAGS) $(CFLAGS_MOD) $(COPT) -Werror=missing-prototypes
# TODO: add these when -Werror is applied
# Disable some warnings, as do most ports. NXP SDK causes undef, tinyusb causes cast-align
# CFLAGS += -Wno-undef -Wno-cast-align
CFLAGS += \
-mthumb \
-mapcs \
-mcpu=cortex-m7 \
-mfloat-abi=hard \
-mfpu=fpv5-sp-d16 \
-DCPU_$(CHIP_VARIANT) \
-DIMXRT1XXX \
-g3 -Wno-unused-parameter \
-ffunction-sections -fdata-sections -fstack-usage
OPTIMIZATION_FLAGS ?= -O2
# option to override compiler optimization level, set in boards/$(BOARD)/mpconfigboard.mk
CFLAGS += $(OPTIMIZATION_FLAGS)
ifeq ($(CIRCUITPY_SWO_TRACE), 1)
CFLAGS += -finstrument-functions -finstrument-functions-exclude-file-list=tinyusb -finstrument-functions-exclude-function-list='USB_OTG1_IRQHandler,usb_irq_handler,nlr_push,CLOCK_EnableClock,CLOCK_SetDiv,CLOCK_SetMux,__DMB,__ISB,__DSB,SCB_EnableICache,SCB_EnableDCache,ARM_MPU_Disable,ARM_MPU_Enable,SCB_DisableDCache,SCB_DisableICache,__enable_irq,__disable_irq,__set_MSP,port_get_raw_ticks,supervisor_ticks_ms64'
endif
$(BUILD)/lib/tlsf/tlsf.o: CFLAGS += -Wno-cast-align
LD_FILES = $(wildcard boards/$(BOARD)/*.ld) $(addprefix linking/, flash/$(FLASH).ld chip_family/$(CHIP_FAMILY).ld common.ld)
LD_SCRIPT_FLAG := -Wl,-T,
LDFLAGS = $(CFLAGS) -nostartfiles -Wl,-nostdlib $(addprefix $(LD_SCRIPT_FLAG), $(LD_FILES)) -Wl,-Map=$@.map -Wl,-cref -Wl,-gc-sections -specs=nano.specs
LIBS := -lgcc -lc -lnosys -lm
# Use toolchain libm if we're not using our own.
ifndef INTERNAL_LIBM
LIBS += -lm
endif
ifndef CHIP_CORE
CHIP_CORE = $(CHIP_FAMILY)
endif
# If not empty, then it is 10xx.
ifneq ($(findstring MIMXRT10, $(CHIP_FAMILY)),)
CFLAGS += -DIMXRT10XX=1 -DIMXRT11XX=0
MIMXRT10xx = $(CHIP_FAMILY)
BOOTLOADER_SIZE := 0x6000C000
else
CFLAGS += -DIMXRT11XX=1 -DIMXRT10XX=0
MIMXRT11xx = $(CHIP_FAMILY)
BOOTLOADER_SIZE := 0x3000C000
endif
LDFLAGS += -mcpu=cortex-m7 -mfloat-abi=hard -mfpu=fpv5-sp-d16 -mthumb -mapcs
SRC_SDK := \
devices/$(CHIP_FAMILY)/drivers/fsl_clock.c \
devices/$(CHIP_FAMILY)/system_$(CHIP_CORE).c \
devices/$(CHIP_FAMILY)/xip/fsl_flexspi_nor_boot.c \
drivers/cache/armv7-m7/fsl_cache.c \
drivers/common/fsl_common_arm.c \
drivers/common/fsl_common.c \
drivers/flexspi/fsl_flexspi.c \
drivers/igpio/fsl_gpio.c \
drivers/lpi2c/fsl_lpi2c.c \
drivers/lpspi/fsl_lpspi.c \
drivers/lpuart/fsl_lpuart.c \
drivers/ocotp/fsl_ocotp.c \
drivers/pwm/fsl_pwm.c \
drivers/sai/fsl_sai.c \
drivers/snvs_hp/fsl_snvs_hp.c \
drivers/snvs_lp/fsl_snvs_lp.c \
drivers/trng/fsl_trng.c \
ifeq ($(CIRCUITPY_ANALOGIO), 1)
SRC_SDK += drivers/adc_12b1msps_sar/fsl_adc.c \
drivers/tempmon/fsl_tempmon.c
endif
ifeq ($(CHIP_FAMILY), MIMXRT1176)
SRC_SDK += devices/$(CHIP_FAMILY)/drivers/fsl_anatop_ai.c \
devices/$(CHIP_FAMILY)/drivers/fsl_dcdc.c \
devices/$(CHIP_FAMILY)/drivers/fsl_pmu.c
endif
SRC_SDK := $(addprefix sdk/, $(SRC_SDK))
$(addprefix $(BUILD)/, $(SRC_SDK:.c=.o)): CFLAGS += -Wno-array-bounds
SRC_C += \
background.c \
boards/$(BOARD)/board.c \
boards/$(BOARD)/flash_config.c \
boards/$(BOARD)/pins.c \
lib/tinyusb/src/portable/chipidea/ci_hs/dcd_ci_hs.c \
mphalport.c \
peripherals/mimxrt10xx/$(CHIP_FAMILY)/clocks.c \
peripherals/mimxrt10xx/$(CHIP_FAMILY)/periph.c \
peripherals/mimxrt10xx/$(CHIP_FAMILY)/pins.c \
peripherals/mimxrt10xx/pins.c \
reset.c \
supervisor/flexspi_nor_flash_ops.c
ifeq ($(CIRCUITPY_USB_HOST), 1)
SRC_C += \
lib/tinyusb/src/portable/chipidea/ci_hs/hcd_ci_hs.c \
lib/tinyusb/src/portable/ehci/ehci.c \
endif
SRC_COMMON_HAL_EXPANDED = $(addprefix shared-bindings/, $(SRC_COMMON_HAL)) \
$(addprefix shared-bindings/, $(SRC_BINDINGS_ENUMS)) \
$(addprefix common-hal/, $(SRC_COMMON_HAL))
SRC_SHARED_MODULE_EXPANDED = $(addprefix shared-bindings/, $(SRC_SHARED_MODULE)) \
$(addprefix shared-module/, $(SRC_SHARED_MODULE)) \
$(addprefix shared-module/, $(SRC_SHARED_MODULE_INTERNAL))
SRC_S = \
sdk/devices/$(CHIP_FAMILY)/gcc/startup_$(CHIP_CORE).S \
supervisor/cpu.S
OBJ = $(PY_O) $(SUPERVISOR_O) $(addprefix $(BUILD)/, $(SRC_C:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_SDK:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_COMMON_HAL_EXPANDED:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_SHARED_MODULE_EXPANDED:.c=.o))
ifeq ($(INTERNAL_LIBM),1)
OBJ += $(addprefix $(BUILD)/, $(SRC_LIBM:.c=.o))
endif
OBJ += $(addprefix $(BUILD)/, $(SRC_CIRCUITPY_COMMON:.c=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_S:.S=.o))
OBJ += $(addprefix $(BUILD)/, $(SRC_MOD:.c=.o))
SRC_QSTR += $(SRC_C) $(SRC_SUPERVISOR) $(SRC_COMMON_HAL_EXPANDED) $(SRC_SHARED_MODULE_EXPANDED) $(SRC_CIRCUITPY_COMMON)
all: $(BUILD)/firmware.bin $(BUILD)/firmware.uf2 $(BUILD)/firmware.hex
ifeq ($(VALID_BOARD),)
$(BUILD)/firmware.elf: invalid-board
else
$(BUILD)/firmware.elf: $(OBJ) $(LD_FILES)
$(STEPECHO) "LINK $@"
$(Q)$(CC) -o $@ $(LDFLAGS) $(filter-out %.ld, $^) -Wl,--print-memory-usage -Wl,--start-group $(LIBS) -Wl,--end-group
endif
# -R excludes sections from the output files.
$(BUILD)/firmware.bin: $(BUILD)/firmware.elf
$(STEPECHO) "Create $@"
$(Q)$(OBJCOPY) -O binary -R .stack -R .dtcm_bss $^ $@
$(BUILD)/firmware.uf2: $(BUILD)/firmware.elf
$(STEPECHO) "Create $@"
$(Q)$(OBJCOPY) -O binary -R .stack -R .dtcm_bss -R .ivt -R .flash_config $^ $@-binpart
$(Q)$(PYTHON) $(TOP)/tools/uf2/utils/uf2conv.py -b $(BOOTLOADER_SIZE) -f MIMXRT10XX -c -o $@ $@-binpart
$(Q)rm $@-binpart
$(BUILD)/firmware.hex: $(BUILD)/firmware.elf
$(Q)$(OBJCOPY) -O ihex -R .stack -R .dtcm_bss $< $@
include $(TOP)/py/mkrules.mk
# Flash using jlink
define jlink_script
halt
loadfile $^
r
go
exit
endef
export jlink_script
JLINKEXE = JLinkExe
flash-jlink: $(BUILD)/firmware.elf
@echo "$$jlink_script" > $(BUILD)/firmware.jlink
$(JLINKEXE) -device $(CHIP_FAMILY)xxx5A -if swd -JTAGConf -1,-1 -speed auto -CommandFile $(BUILD)/firmware.jlink
flash: flash-jlink
Reference in New Issue View Git Blame Copy Permalink