circuitpython/ports/espressif/boards/oxocard_connect/board.c
2023-11-13 22:22:28 +01:00

116 lines
4.3 KiB
C

/*
* This file is part of the MicroPython project, http://micropython.org/
*
* The MIT License (MIT)
*
* Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "supervisor/board.h"
#include "mpconfigboard.h"
#include "shared-bindings/microcontroller/Pin.h"
#include "shared-module/displayio/__init__.h"
#include "shared-module/displayio/mipi_constants.h"
#define DELAY 0x80
// display init sequence
uint8_t display_init_sequence[] = {
0x01, DELAY, 0x96, // _SWRESET and Delay 150ms
0x11, DELAY, 0xFF, // _SLPOUT and Delay 500ms
0x3A, DELAY | 1, 0x55, 0x0A, // _COLMOD (65K of RGB, 16 bits/pixel) and Delay 10ms
0x36, 0x01, 0x00, // _MADCTL
0x2A, 0x04, 0x00, 0x00, 0x00, 0xF0, // _CASET (0..240)
0x2B, 0x04, 0x00, 0x00, 0x00, 0xF0, // _RASET (0..240)
0x21, DELAY, 0x0A, // _INVON Hack and Delay 10ms
0x13, DELAY, 0x0A, // _NORON and Delay 10ms
0x36, 0x01, 0x60, // _MADCTL (MX=1, MY=1)
0x29, DELAY, 0xFF, // _DISPON and Delay 500ms
};
static void display_init(void) {
fourwire_fourwire_obj_t *bus = &allocate_display_bus()->fourwire_bus;
busio_spi_obj_t *spi = &bus->inline_bus;
common_hal_busio_spi_construct(
spi,
&pin_GPIO14, // CLK
&pin_GPIO13, // MOSI
&pin_GPIO12, // MISO
false); // Not half-duplex
common_hal_busio_spi_never_reset(spi);
bus->base.type = &fourwire_fourwire_type;
common_hal_fourwire_fourwire_construct(
bus,
spi,
&pin_GPIO27, // DC
&pin_GPIO15, // CS
&pin_GPIO4, // RST
24000000, // baudrate
0, // polarity
0 // phase
);
busdisplay_busdisplay_obj_t *display = &allocate_display()->display;
display->base.type = &busdisplay_busdisplay_type;
common_hal_busdisplay_busdisplay_construct(
display,
bus,
240, // width (after rotation)
240, // height (after rotation)
0, // column start
0, // row start
0, // rotation
16, // color depth
false, // grayscale
false, // pixels in a byte share a row. Only valid for depths < 8
1, // bytes per cell. Only valid for depths < 8
false, // reverse_pixels_in_byte. Only valid for depths < 8
true, // reverse_pixels_in_word
MIPI_COMMAND_SET_COLUMN_ADDRESS, // set column command
MIPI_COMMAND_SET_PAGE_ADDRESS, // set row command
MIPI_COMMAND_WRITE_MEMORY_START, // write memory command
display_init_sequence,
sizeof(display_init_sequence),
&pin_GPIO19, // backlight pin
NO_BRIGHTNESS_COMMAND,
1.0f, // brightness
false, // single_byte_bounds
false, // data_as_commands
true, // auto_refresh
60, // native_frames_per_second
true, // backlight_on_high
false, // SH1107_addressing
50000 // backlight pwm frequency
);
}
void board_init(void) {
// Display
display_init();
}
// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.