// LEDs
#define USB_REPL

#define MICROPY_HW_BOARD_NAME "Adafruit Feather M0 Flash"
#define MICROPY_HW_MCU_NAME "samd21g18"

// Rev. A
// #define MICROPY_HW_NEOPIXEL &pin_PA14

// Rev. B
#define MICROPY_HW_NEOPIXEL &pin_PA06

#define SPI_FLASH_BAUDRATE  (1000000)

// On-board flash
// Rev A.
// #define SPI_FLASH_MUX_SETTING SPI_SIGNAL_MUX_SETTING_E
// #define SPI_FLASH_PAD0_PINMUX PINMUX_PA12D_SERCOM4_PAD0 // MISO
// // Use default pinmux for the chip select since we manage it ourselves.
// #define SPI_FLASH_PAD1_PINMUX PINMUX_DEFAULT // CS
// #define SPI_FLASH_PAD2_PINMUX PINMUX_PB10D_SERCOM4_PAD2 // MOSI
// #define SPI_FLASH_PAD3_PINMUX PINMUX_PB11D_SERCOM4_PAD3 // SCK
// #define SPI_FLASH_SERCOM      SERCOM4

// Rev B.
#define SPI_FLASH_MUX_SETTING SPI_SIGNAL_MUX_SETTING_C
#define SPI_FLASH_PAD0_PINMUX PINMUX_PA08D_SERCOM2_PAD0 // MOSI
// Use default pinmux for the chip select since we manage it ourselves.
#define SPI_FLASH_PAD1_PINMUX PINMUX_PA09D_SERCOM2_PAD1 // SCK
#define SPI_FLASH_PAD2_PINMUX PINMUX_PA14C_SERCOM2_PAD2 // MISO
#define SPI_FLASH_PAD3_PINMUX PINMUX_DEFAULT // SCK
#define SPI_FLASH_SERCOM      SERCOM2

#define SPI_FLASH_CS          PIN_PA13

// Rev. A
// #define MICROPY_PORT_A        (PORT_PA12 | PORT_PA13 | PORT_PA14 | PORT_PA24 | PORT_PA25)
// #define MICROPY_PORT_B        (PORT_PB10 | PORT_PB11)

// Rev. B
#define MICROPY_PORT_A        (PORT_PA06 | PORT_PA08 | PORT_PA09 | PORT_PA14 | PORT_PA13 | PORT_PA14 | PORT_PA24 | PORT_PA25)
#define MICROPY_PORT_B        ( 0 )

#define AUTORESET_DELAY_MS 500

#include "spi_flash.h"

#define BOARD_FLASH_SIZE (0x00040000 - 0x2000)