# SPDX-FileCopyrightText: 2014 MicroPython & CircuitPython contributors (https://github.com/adafruit/circuitpython/graphs/contributors) # # SPDX-License-Identifier: MIT msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-08-04 18:42-0500\n" "PO-Revision-Date: 2020-08-02 20:41+0000\n" "Last-Translator: _fonzlate \n" "Language-Team: none\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Generator: Weblate 4.2-dev\n" #: main.c msgid "" "\n" "Code done running. Waiting for reload.\n" msgstr "" "\n" "Code is uitgevoerd. Wachten op herladen.\n" #: supervisor/shared/safe_mode.c msgid "" "\n" "Please file an issue with the contents of your CIRCUITPY drive at \n" "https://github.com/adafruit/circuitpython/issues\n" msgstr "" "\n" "Meld een probleem met de inhoud van de CIRCUITPY drive op:\n" "https://github.com/adafruit/circuitpython/issues\n" #: supervisor/shared/safe_mode.c msgid "" "\n" "To exit, please reset the board without " msgstr "" "\n" "Om te verlaten, herstart de module zonder " #: py/obj.c msgid " File \"%q\"" msgstr " Bestand" #: py/obj.c msgid " File \"%q\", line %d" msgstr " Bestand \"%q\", regel %d" #: main.c msgid " output:\n" msgstr " uitvoer:\n" #: py/objstr.c #, c-format msgid "%%c requires int or char" msgstr "%%c vereist een int of char" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" msgstr "%d adres pins en %d RGB pins geven een hoogte van %d aan, niet %d" #: ports/atmel-samd/common-hal/sdioio/SDCard.c msgid "%q failure: %d" msgstr "%q fout: %d" #: shared-bindings/microcontroller/Pin.c msgid "%q in use" msgstr "%q in gebruik" #: extmod/moductypes.c ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c py/objstr.c #: py/objstrunicode.c msgid "%q index out of range" msgstr "%q index buiten bereik" #: py/obj.c msgid "%q indices must be integers, not %q" msgstr "" #: shared-bindings/vectorio/Polygon.c msgid "%q list must be a list" msgstr "%q lijst moet een lijst zijn" #: shared-bindings/memorymonitor/AllocationAlarm.c msgid "%q must be >= 0" msgstr "%q moet >= 0 zijn" #: shared-bindings/_bleio/CharacteristicBuffer.c #: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c #: shared-bindings/displayio/Shape.c #: shared-bindings/memorymonitor/AllocationAlarm.c #: shared-bindings/vectorio/Circle.c shared-bindings/vectorio/Rectangle.c msgid "%q must be >= 1" msgstr "%q moet >= 1 zijn" #: shared-module/vectorio/Polygon.c msgid "%q must be a tuple of length 2" msgstr "%q moet een tuple van lengte 2 zijn" #: ports/atmel-samd/common-hal/sdioio/SDCard.c msgid "%q pin invalid" msgstr "%q pin onjuist" #: shared-bindings/fontio/BuiltinFont.c msgid "%q should be an int" msgstr "%q moet een int zijn" #: py/bc.c py/objnamedtuple.c msgid "%q() takes %d positional arguments but %d were given" msgstr "%q() verwacht %d positionele argumenten maar kreeg %d" #: py/argcheck.c msgid "'%q' argument required" msgstr "'%q' argument vereist" #: py/runtime.c msgid "'%q' object cannot assign attribute '%q'" msgstr "" #: py/proto.c msgid "'%q' object does not support '%q'" msgstr "" #: py/obj.c msgid "'%q' object does not support item assignment" msgstr "" #: py/obj.c msgid "'%q' object does not support item deletion" msgstr "" #: py/runtime.c msgid "'%q' object has no attribute '%q'" msgstr "" #: py/runtime.c msgid "'%q' object is not an iterator" msgstr "" #: py/objtype.c py/runtime.c msgid "'%q' object is not callable" msgstr "" #: py/runtime.c msgid "'%q' object is not iterable" msgstr "" #: py/obj.c msgid "'%q' object is not subscriptable" msgstr "" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects a label" msgstr "'%s' verwacht een label" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects a register" msgstr "'%s' verwacht een register" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects a special register" msgstr "'%s' verwacht een speciaal register" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects an FPU register" msgstr "'%s' verwacht een FPU register" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects an address of the form [a, b]" msgstr "'%s' verwacht een adres in de vorm [a, b]" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects an integer" msgstr "'%s' verwacht een integer" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects at most r%d" msgstr "'%s' verwacht op zijn meest r%d" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects {r0, r1, ...}" msgstr "'%s' verwacht {r0, r1, …}" #: py/emitinlinextensa.c #, c-format msgid "'%s' integer %d is not within range %d..%d" msgstr "'%s' integer %d is niet in bereik %d..%d" #: py/emitinlinethumb.c #, c-format msgid "'%s' integer 0x%x does not fit in mask 0x%x" msgstr "'%s' integer 0x%x past niet in mask 0x%x" #: py/objstr.c msgid "'=' alignment not allowed in string format specifier" msgstr "'=' uitlijning niet toegestaan in string format specifier" #: shared-module/struct/__init__.c msgid "'S' and 'O' are not supported format types" msgstr "'S' and 'O' zijn niet ondersteunde format types" #: py/compile.c msgid "'align' requires 1 argument" msgstr "'align' vereist 1 argument" #: py/compile.c msgid "'await' outside function" msgstr "'await' buiten de functie" #: py/compile.c msgid "'await', 'async for' or 'async with' outside async function" msgstr "'await', 'async for' of 'async with' buiten async functie" #: py/compile.c msgid "'break' outside loop" msgstr "'break' buiten de loop" #: py/compile.c msgid "'continue' outside loop" msgstr "'continue' buiten de loop" #: py/objgenerator.c msgid "'coroutine' object is not an iterator" msgstr "'coroutine' object is geen iterator" #: py/compile.c msgid "'data' requires at least 2 arguments" msgstr "'data' vereist op zijn minst 2 argumenten" #: py/compile.c msgid "'data' requires integer arguments" msgstr "'data' vereist integer argumenten" #: py/compile.c msgid "'label' requires 1 argument" msgstr "'label' vereist 1 argument" #: py/compile.c msgid "'return' outside function" msgstr "'return' buiten de functie" #: py/compile.c msgid "'yield' outside function" msgstr "'yield' buiten de functie" #: py/compile.c msgid "*x must be assignment target" msgstr "*x moet een assignment target zijn" #: py/obj.c msgid ", in %q\n" msgstr ", in %q\n" #: py/objcomplex.c msgid "0.0 to a complex power" msgstr "0.0 tot een complexe macht" #: py/modbuiltins.c msgid "3-arg pow() not supported" msgstr "3-arg pow() niet ondersteund" #: ports/atmel-samd/common-hal/countio/Counter.c #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c msgid "A hardware interrupt channel is already in use" msgstr "Een hardware interrupt kanaal is al in gebruik" #: shared-bindings/_bleio/Address.c #, c-format msgid "Address must be %d bytes long" msgstr "Adres moet %d bytes lang zijn" #: shared-bindings/_bleio/Address.c msgid "Address type out of range" msgstr "Adres type buiten bereik" #: ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Alle I2C peripherals zijn in gebruik" #: ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "Alle SPI peripherals zijn in gebruik" #: ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "Alle UART peripherals zijn in gebruik" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "All event channels in use" msgstr "Alle event kanalen zijn in gebruik" #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Alle sync event kanalen zijn in gebruik" #: shared-bindings/pulseio/PWMOut.c msgid "All timers for this pin are in use" msgstr "Alle timers voor deze pin zijn in gebruik" #: ports/atmel-samd/common-hal/_pew/PewPew.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/stm/peripherals/timers.c shared-bindings/pulseio/PWMOut.c msgid "All timers in use" msgstr "Alle timers zijn in gebruik" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Already advertising." msgstr "Advertising is al bezig." #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" msgstr "Wordt al uitgevoerd" #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "AnalogIn niet ondersteund door gegeven pin" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "AnalogOut functionaliteit niet ondersteund" #: shared-bindings/analogio/AnalogOut.c msgid "AnalogOut is only 16 bits. Value must be less than 65536." msgstr "AnalogOut is slechts 16 bits. Waarde moet minder dan 65536 zijn." #: ports/atmel-samd/common-hal/analogio/AnalogOut.c msgid "AnalogOut not supported on given pin" msgstr "AnalogOut niet ondersteund door gegeven pin" #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c msgid "Another send is already active" msgstr "Een andere send is al actief" #: shared-bindings/pulseio/PulseOut.c msgid "Array must contain halfwords (type 'H')" msgstr "Array moet halfwords (type 'H') bevatten" #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Array waardes moet enkele bytes zijn." #: shared-bindings/microcontroller/Pin.c msgid "At most %d %q may be specified (not %d)" msgstr "Op zijn meest %d %q mogen worden gespecificeerd (niet %d)" #: shared-module/memorymonitor/AllocationAlarm.c #, c-format msgid "Attempt to allocate %d blocks" msgstr "Poging om %d blokken toe te wijzen" #: supervisor/shared/safe_mode.c msgid "Attempted heap allocation when MicroPython VM not running." msgstr "heap allocatie geprobeerd terwijl MicroPython VM niet draait." #: main.c msgid "Auto-reload is off.\n" msgstr "Auto-herlaad staat uit.\n" #: main.c msgid "" "Auto-reload is on. Simply save files over USB to run them or enter REPL to " "disable.\n" msgstr "" "Auto-herlaad staat aan. Sla bestanden simpelweg op over USB om uit te voeren " "of start REPL om uit te schakelen.\n" #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" msgstr "Onder de minimum frame rate" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Bit clock and word select must share a clock unit" msgstr "Bit clock en word select moeten een clock eenheid delen" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bit diepte moet een meervoud van 8 zijn." #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Both RX and TX required for flow control" msgstr "RX en TX zijn beide vereist voor stroomregeling" #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c msgid "Both pins must support hardware interrupts" msgstr "Beide pinnen moeten hardware interrupts ondersteunen" #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "Brightness must be 0-1.0" msgstr "Helderheid moet tussen de 0 en 1.0 liggen" #: shared-bindings/supervisor/__init__.c msgid "Brightness must be between 0 and 255" msgstr "Helderheid moet tussen de 0 en 255 liggen" #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Brightness not adjustable" msgstr "Helderheid is niet aanpasbaar" #: shared-bindings/_bleio/UUID.c #, c-format msgid "Buffer + offset too small %d %d %d" msgstr "Buffer + offset te klein %d %d %d" #: shared-module/usb_hid/Device.c #, c-format msgid "Buffer incorrect size. Should be %d bytes." msgstr "Buffer heeft incorrect grootte. Moet %d bytes zijn." #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Buffer is not a bytearray." msgstr "Buffer is geen bytearray." #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Buffer is too small" msgstr "Buffer is te klein" #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #, c-format msgid "Buffer length %d too big. It must be less than %d" msgstr "Buffer lengte %d te groot. Het moet kleiner zijn dan %d" #: ports/atmel-samd/common-hal/sdioio/SDCard.c #: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c msgid "Buffer length must be a multiple of 512" msgstr "Buffer lengte moet een veelvoud van 512 zijn" #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c msgid "Buffer must be at least length 1" msgstr "Buffer moet op zijn minst lengte 1 zijn" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Buffer too large and unable to allocate" msgstr "Buffer is te groot en niet in staat te alloceren" #: shared-bindings/_bleio/PacketBuffer.c #, c-format msgid "Buffer too short by %d bytes" msgstr "Buffer is %d bytes te klein" #: ports/atmel-samd/common-hal/displayio/ParallelBus.c #: ports/nrf/common-hal/displayio/ParallelBus.c #, c-format msgid "Bus pin %d is already in use" msgstr "Bus pin %d al in gebruik" #: shared-bindings/_bleio/UUID.c msgid "Byte buffer must be 16 bytes." msgstr "Byte buffer moet 16 bytes zijn." #: shared-bindings/nvm/ByteArray.c msgid "Bytes must be between 0 and 255." msgstr "Bytes moeten tussen 0 en 255 liggen." #: shared-bindings/aesio/aes.c msgid "CBC blocks must be multiples of 16 bytes" msgstr "CBC blocks moeten meervouden van 16 bytes zijn" #: py/objtype.c msgid "Call super().__init__() before accessing native object." msgstr "Roep super().__init__() aan voor toegang native object." #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "Can't set CCCD on local Characteristic" msgstr "Kan CCCD niet toewijzen aan lokaal Characteristic" #: shared-bindings/displayio/Bitmap.c #: shared-bindings/memorymonitor/AllocationSize.c #: shared-bindings/pulseio/PulseIn.c msgid "Cannot delete values" msgstr "Kan waardes niet verwijderen" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "get pull kan niet gedurende output mode" #: ports/nrf/common-hal/microcontroller/Processor.c msgid "Cannot get temperature" msgstr "Kan de temperatuur niet verkrijgen" #: shared-bindings/_bleio/Adapter.c msgid "Cannot have scan responses for extended, connectable advertisements." msgstr "" "Kan geen scan responses voor extended, connectable advertisements hebben." #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Cannot output both channels on the same pin" msgstr "Output van beide kanalen kan niet op dezelfde pin" #: shared-module/bitbangio/SPI.c msgid "Cannot read without MISO pin." msgstr "Kan niet lezen zonder MISO pin." #: shared-bindings/audiobusio/PDMIn.c msgid "Cannot record to a file" msgstr "Kan niet opnemen naar een bestand" #: shared-module/storage/__init__.c msgid "Cannot remount '/' when USB is active." msgstr "Kan '/' niet hermounten als USB actief is." #: ports/atmel-samd/common-hal/microcontroller/__init__.c #: ports/cxd56/common-hal/microcontroller/__init__.c #: ports/mimxrt10xx/common-hal/microcontroller/__init__.c msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" "Kan niet resetten naar bootloader omdat er geen bootloader aanwezig is." #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Kan de waarde niet toewijzen als de richting input is." #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "Kan RTS of CTS niet specificeren in RS485 modus" #: py/objslice.c msgid "Cannot subclass slice" msgstr "Kan slice niet subclasseren" #: shared-module/bitbangio/SPI.c msgid "Cannot transfer without MOSI and MISO pins." msgstr "Kan niet overdragen zonder MOSI en MISO pinnen." #: extmod/moductypes.c msgid "Cannot unambiguously get sizeof scalar" msgstr "Kan niet ondubbelzinning sizeof scalar verkrijgen" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Cannot vary frequency on a timer that is already in use" msgstr "Kan de frequentie van een timer die al in gebruik is niet variëren" #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "Kan niet schrijven zonder MOSI pin." #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "CharacteristicBuffer writing not provided" msgstr "CharacteristicBuffer schrijven is niet beschikbaar" #: supervisor/shared/safe_mode.c msgid "CircuitPython core code crashed hard. Whoops!\n" msgstr "CircuitPython core code is hard gecrashed. Ojee!\n" #: supervisor/shared/safe_mode.c msgid "" "CircuitPython is in safe mode because you pressed the reset button during " "boot. Press again to exit safe mode.\n" msgstr "" "CircuitPython is in veilige modus omdat de rest knop werd ingedrukt tijdens " "het opstarten. Druk nogmaals om veilige modus te verlaten\n" #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Clock pin init mislukt." #: shared-module/bitbangio/I2C.c msgid "Clock stretch too long" msgstr "Clock stretch is te lang" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Clock unit in use" msgstr "Clock unit in gebruik" #: shared-bindings/_pew/PewPew.c msgid "Column entry must be digitalio.DigitalInOut" msgstr "Column entry moet digitalio.DigitalInOut zijn" #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c #: shared-bindings/displayio/ParallelBus.c msgid "Command must be an int between 0 and 255" msgstr "Command moet een int tussen 0 en 255 zijn" #: shared-bindings/_bleio/Connection.c msgid "" "Connection has been disconnected and can no longer be used. Create a new " "connection." msgstr "" "Verbinding is verbroken en kan niet langer gebruikt worden. Creëer een " "nieuwe verbinding." #: py/persistentcode.c msgid "Corrupt .mpy file" msgstr "Corrupt .mpy bestand" #: py/emitglue.c msgid "Corrupt raw code" msgstr "Corrupt raw code" #: ports/cxd56/common-hal/gnss/GNSS.c msgid "Could not initialize GNSS" msgstr "Kan GNSS niet initialiseren" #: ports/cxd56/common-hal/sdioio/SDCard.c msgid "Could not initialize SDCard" msgstr "Kan SDCard niet initialiseren" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "Kan UART niet initialiseren" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Could not initialize channel" msgstr "Kan kanaal niet initialiseren" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Could not initialize timer" msgstr "Kan timer niet initialiseren" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Could not re-init channel" msgstr "Kan kanaal niet her-initialiseren" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Could not re-init timer" msgstr "Kan timer niet her-initialiseren" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Could not restart PWM" msgstr "Kan PWM niet herstarten" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Could not start PWM" msgstr "Kan PWM niet starten" #: ports/stm/common-hal/busio/UART.c msgid "Could not start interrupt, RX busy" msgstr "Kan interrupt niet starten, RX is bezig" #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "Kan decoder niet alloceren" #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate first buffer" msgstr "Kan eerste buffer niet alloceren" #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate input buffer" msgstr "Kan input buffer niet alloceren" #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate second buffer" msgstr "Kan tweede buffer niet alloceren" #: supervisor/shared/safe_mode.c msgid "Crash into the HardFault_Handler." msgstr "Crash naar de HardFault_Handler." #: ports/stm/common-hal/analogio/AnalogOut.c msgid "DAC Channel Init Error" msgstr "DAC kanaal Init Fout" #: ports/stm/common-hal/analogio/AnalogOut.c msgid "DAC Device Init Error" msgstr "DAC Apparaat Init Fout" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "DAC al in gebruik" #: ports/atmel-samd/common-hal/displayio/ParallelBus.c #: ports/nrf/common-hal/displayio/ParallelBus.c msgid "Data 0 pin must be byte aligned" msgstr "Data 0 pin moet byte uitgelijnd zijn" #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" msgstr "Data chunk moet gevolgd worden door fmt chunk" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Data too large for advertisement packet" msgstr "Data te groot voor advertisement pakket" #: shared-bindings/audiobusio/PDMIn.c msgid "Destination capacity is smaller than destination_length." msgstr "Bestemming grootte is kleiner dan destination_length." #: ports/nrf/common-hal/audiobusio/I2SOut.c msgid "Device in use" msgstr "Apparaat al in gebruik" #: ports/cxd56/common-hal/digitalio/DigitalInOut.c msgid "DigitalInOut not supported on given pin" msgstr "DigitalInOut niet ondersteund door gegeven pin" #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Display must have a 16 bit colorspace." msgstr "Beeldscherm moet een 16bit kleurruimte hebben." #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Display rotation must be in 90 degree increments" msgstr "Beeldscherm rotatie moet in stappen van 90 graden" #: shared-bindings/digitalio/DigitalInOut.c msgid "Drive mode not used when direction is input." msgstr "Drive modus niet gebruikt als de richting input is." #: shared-bindings/aesio/aes.c msgid "ECB only operates on 16 bytes at a time" msgstr "ECB werkt alleen met 16 bytes tegelijkertijd" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c msgid "EXTINT channel already in use" msgstr "EXTINT kanaal al in gebruik" #: extmod/modure.c msgid "Error in regex" msgstr "Fout in regex" #: shared-bindings/aesio/aes.c shared-bindings/busio/SPI.c #: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Verwacht een %q" #: shared-bindings/_bleio/CharacteristicBuffer.c #: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c msgid "Expected a Characteristic" msgstr "Verwachtte een Characteristic" #: shared-bindings/_bleio/Characteristic.c msgid "Expected a Service" msgstr "Verwachtte een Service" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c #: shared-bindings/_bleio/Service.c msgid "Expected a UUID" msgstr "Verwachtte een UUID" #: shared-bindings/_bleio/Adapter.c msgid "Expected an Address" msgstr "Verwachtte een adres" #: shared-module/_pixelbuf/PixelBuf.c #, c-format msgid "Expected tuple of length %d, got %d" msgstr "Verwachtte een tuple met lengte %d, maar kreeg %d" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Extended advertisements with scan response not supported." msgstr "Extended advertisements met scan antwoord niet ondersteund." #: extmod/ulab/code/fft/fft.c msgid "FFT is defined for ndarrays only" msgstr "FFT alleen voor ndarrays gedefineerd" #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "Commando verzenden mislukt." #: ports/nrf/sd_mutex.c #, c-format msgid "Failed to acquire mutex, err 0x%04x" msgstr "Fout tijdens verkrijgen mutex, err 0x%04x" #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "Failed to allocate RX buffer" msgstr "RX buffer alloceren mislukt" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Mislukt een RX buffer van %d bytes te alloceren" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "Verbinding mislukt: interne fout" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: timeout" msgstr "Verbinding mislukt: timeout" #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "Mislukt om MP3 bestand te ontleden" #: ports/nrf/sd_mutex.c #, c-format msgid "Failed to release mutex, err 0x%04x" msgstr "Mislukt mutex los te laten, err 0x%04x" #: supervisor/shared/safe_mode.c msgid "Failed to write internal flash." msgstr "Schrijven naar interne flash mislukt." #: py/moduerrno.c msgid "File exists" msgstr "Bestand bestaat" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "Frequency captured is above capability. Capture Paused." msgstr "" "De vastgelegde frequentie is boven de capaciteit. Vastleggen gepauzeerd." #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Frequency must match existing PWMOut using this timer" msgstr "" "Frequentie moet overeenkomen met bestaande PWMOut bij gebruik van deze timer" #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" msgstr "Functie vereist lock" #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Group already used" msgstr "Groep al gebruikt" #: shared-module/displayio/Group.c msgid "Group full" msgstr "Groep is vol" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c #: ports/stm/common-hal/busio/SPI.c msgid "Hardware busy, try alternative pins" msgstr "Hardware bezig, probeer alternatieve pinnen" #: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Hardware in use, try alternative pins" msgstr "Hardware in gebruik, probeer alternatieve pinnen" #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "I/O actie op gesloten bestand" #: ports/stm/common-hal/busio/I2C.c msgid "I2C Init Error" msgstr "I2C Init Fout" #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut is niet beschikbaar" #: shared-bindings/aesio/aes.c #, c-format msgid "IV must be %d bytes long" msgstr "IV %d bytes lang zijn" #: py/persistentcode.c msgid "" "Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/" "mpy-update for more info." msgstr "" "Incompatibel .mpy bestand. Update alle .mpy bestanden. Zie http://adafru.it/" "mpy-update voor meer informatie." #: shared-bindings/_pew/PewPew.c msgid "Incorrect buffer size" msgstr "Incorrecte buffer grootte" #: py/moduerrno.c msgid "Input/output error" msgstr "Input/Output fout" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Onvoldoende authenticatie" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient encryption" msgstr "Onvoldoende encryptie" #: ports/stm/common-hal/busio/UART.c msgid "Internal define error" msgstr "Interne define fout" #: shared-module/rgbmatrix/RGBMatrix.c #, c-format msgid "Internal error #%d" msgstr "Interne fout #%d" #: shared-bindings/sdioio/SDCard.c msgid "Invalid %q" msgstr "Ongeldige %q" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "Ongeldige %q pin" #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Invalid ADC Unit value" msgstr "Ongeldige ADC Unit waarde" #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "Ongeldig BMP bestand" #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "Ongeldige DAC pin opgegeven" #: ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "Ongeldige I2C pin selectie" #: ports/atmel-samd/common-hal/pulseio/PWMOut.c #: ports/cxd56/common-hal/pulseio/PWMOut.c #: ports/nrf/common-hal/pulseio/PWMOut.c shared-bindings/pulseio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Ongeldige PWM frequentie" #: ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "Ongeldige SPI pin selectie" #: ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "Ongeldige UART pin selectie" #: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid argument" msgstr "Ongeldig argument" #: shared-module/displayio/Bitmap.c msgid "Invalid bits per value" msgstr "Ongeldige bits per waarde" #: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "Ongeldige buffer grootte" #: shared-bindings/_pixelbuf/PixelBuf.c msgid "Invalid byteorder string" msgstr "Ongeldige byteorder string" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "Invalid capture period. Valid range: 1 - 500" msgstr "Ongeldige vastlegging periode. Geldig bereik: 1 - 500" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid channel count" msgstr "Ongeldige kanaal aantallen" #: shared-bindings/digitalio/DigitalInOut.c msgid "Invalid direction." msgstr "Ongeldige richting." #: shared-module/audiocore/WaveFile.c msgid "Invalid file" msgstr "Ongeldig bestand" #: shared-module/audiocore/WaveFile.c msgid "Invalid format chunk size" msgstr "Ongeldig formaat stuk grootte" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Invalid frequency supplied" msgstr "Ongeldige frequentie opgegeven" #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "Ongeldig geheugen adres." #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid number of bits" msgstr "Ongeldig aantal bits" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c #: shared-bindings/displayio/FourWire.c msgid "Invalid phase" msgstr "Ongeldige fase" #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c #: shared-bindings/pulseio/PWMOut.c shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Ongeldige pin" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Invalid pin for left channel" msgstr "Ongeldige pin voor linker kanaal" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Invalid pin for right channel" msgstr "Ongeldige pin voor rechter kanaal" #: ports/atmel-samd/common-hal/busio/I2C.c #: ports/atmel-samd/common-hal/busio/SPI.c #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c msgid "Invalid pins" msgstr "Ongeldige pinnen" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Invalid pins for PWMOut" msgstr "Ongeldige pinnen voor PWMOut" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c #: shared-bindings/displayio/FourWire.c msgid "Invalid polarity" msgstr "Ongeldige polariteit" #: shared-bindings/_bleio/Characteristic.c msgid "Invalid properties" msgstr "Ongeldige eigenschappen" #: shared-bindings/microcontroller/__init__.c msgid "Invalid run mode." msgstr "Ongeldige run modus." #: shared-module/_bleio/Attribute.c msgid "Invalid security_mode" msgstr "Ongeldige security_mode" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Ongeldige stem" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice count" msgstr "Ongeldig stem aantal" #: shared-module/audiocore/WaveFile.c msgid "Invalid wave file" msgstr "Ongeldig wave bestand" #: ports/stm/common-hal/busio/UART.c msgid "Invalid word/bit length" msgstr "Ongeldig woord/bit lengte" #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Sleutel moet 16, 24, of 32 bytes lang zijn" #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "LHS van sleutelwoord arg moet een id zijn" #: shared-module/displayio/Group.c msgid "Layer already in a group." msgstr "Laag al in groep." #: shared-module/displayio/Group.c msgid "Layer must be a Group or TileGrid subclass." msgstr "Laag moet een Groep of TileGrid subklasse zijn." #: py/objslice.c msgid "Length must be an int" msgstr "Lengte moet een int zijn" #: py/objslice.c msgid "Length must be non-negative" msgstr "Lengte moet niet negatief zijn" #: shared-module/bitbangio/SPI.c msgid "MISO pin init failed." msgstr "MISO pin init mislukt." #: shared-module/bitbangio/SPI.c msgid "MOSI pin init failed." msgstr "MOSI pin init mislukt." #: shared-module/displayio/Shape.c #, c-format msgid "Maximum x value when mirrored is %d" msgstr "Maximale x waarde indien gespiegeld is %d" #: supervisor/shared/safe_mode.c msgid "MicroPython NLR jump failed. Likely memory corruption." msgstr "MicroPython NLR sprong mislukt. Waarschijnlijk geheugen corruptie." #: supervisor/shared/safe_mode.c msgid "MicroPython fatal error." msgstr "MicroPython fatale fout." #: shared-bindings/audiobusio/PDMIn.c msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "Microfoon opstart vertraging moet in bereik van 0.0 tot 1.0 zijn" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Missing MISO or MOSI Pin" msgstr "Ontbrekende MISO of MOSI Pin" #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "%q moet een subklasse zijn." #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Must provide MISO or MOSI pin" msgstr "MISO of MOSI moeten worden gegeven" #: ports/stm/common-hal/busio/SPI.c msgid "Must provide SCK pin" msgstr "SCK pin moet opgegeven worden" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Must use a multiple of 6 rgb pins, not %d" msgstr "Een meervoud van 6 rgb pinnen moet worden gebruikt, niet %d" #: py/parse.c msgid "Name too long" msgstr "Naam te lang" #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "No CCCD for this Characteristic" msgstr "Geen CCCD voor deze Characteristic" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Geen DAC op de chip" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "No DMA channel found" msgstr "Geen DMA kanaal gevonden" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "Geen MISO pin" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "Geen MOSI pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Geen RX pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Geen TX pin" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "No available clocks" msgstr "Geen klokken beschikbaar" #: shared-bindings/_bleio/PacketBuffer.c msgid "No connection: length cannot be determined" msgstr "Geen verbinding: lengte kan niet worden bepaald" #: shared-bindings/board/__init__.c msgid "No default %q bus" msgstr "Geen standaard %q bus" #: ports/atmel-samd/common-hal/touchio/TouchIn.c msgid "No free GCLKs" msgstr "Geen vrije GCLKs" #: shared-bindings/os/__init__.c msgid "No hardware random available" msgstr "Geen hardware random beschikbaar" #: ports/atmel-samd/common-hal/ps2io/Ps2.c msgid "No hardware support on clk pin" msgstr "Geen hardware ondersteuning beschikbaar op clk pin" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "No hardware support on pin" msgstr "Geen hardware ondersteuning op pin" #: shared-bindings/aesio/aes.c msgid "No key was specified" msgstr "Een sleutel was niet gespecificeerd" #: shared-bindings/time/__init__.c msgid "No long integer support" msgstr "Geen lange integer ondersteuning" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "No more timers available on this pin." msgstr "Geen timers meer beschikbaar op deze pin." #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Geen pulldown op pin; 1MOhm aangeraden" #: py/moduerrno.c msgid "No space left on device" msgstr "Geen ruimte meer beschikbaar op apparaat" #: py/moduerrno.c msgid "No such file/directory" msgstr "Bestand/map bestaat niet" #: shared-module/rgbmatrix/RGBMatrix.c msgid "No timer available" msgstr "Geen timer beschikbaar" #: supervisor/shared/safe_mode.c msgid "Nordic Soft Device failure assertion." msgstr "Nordic Soft Device assertion mislukt." #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" msgstr "Niet verbonden" #: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c #: shared-bindings/audiopwmio/PWMAudioOut.c msgid "Not playing" msgstr "Wordt niet afgespeeld" #: main.c msgid "Not running saved code.\n" msgstr "" #: shared-bindings/util.c msgid "" "Object has been deinitialized and can no longer be used. Create a new object." msgstr "" "Object is gedeïnitialiseerd en kan niet meer gebruikt worden. Creëer een " "nieuw object." #: ports/nrf/common-hal/busio/UART.c msgid "Odd parity is not supported" msgstr "Oneven pariteit is niet ondersteund" #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Only 8 or 16 bit mono with " msgstr "Alleen 8 of 16 bit mono met " #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" "Only Windows format, uncompressed BMP supported: given header size is %d" msgstr "" "Alleen Windows formaat en ongecomprimeerd BMP ondersteund: gegeven header " "grootte is %d" #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" "Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: " "%d bpp given" msgstr "" "Alleen monochrome en 4bpp of 8bpp, en 16bpp of grotere geïndiceerde BMP's " "zijn ondersteund: %d bpp is gegeven" #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Oversample moet een meervoud van 8 zijn." #: shared-bindings/pulseio/PWMOut.c msgid "" "PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)" msgstr "" "PWM duty_cycle moet tussen 0 en 65535 inclusief zijn (16 bit resolutie)" #: shared-bindings/pulseio/PWMOut.c msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" "PWM frequentie is niet schrijfbaar wanneer de variable_frequency False is " "tijdens constructie." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus nog niet ondersteund" #: py/moduerrno.c msgid "Permission denied" msgstr "Toegang geweigerd" #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin heeft geen ADC mogelijkheden" #: shared-bindings/digitalio/DigitalInOut.c msgid "Pin is input only" msgstr "Pin kan alleen voor invoer gebruikt worden" #: ports/atmel-samd/common-hal/countio/Counter.c msgid "Pin must support hardware interrupts" msgstr "Pin moet hardware interrupts ondersteunen" #: ports/stm/common-hal/pulseio/PulseIn.c msgid "Pin number already reserved by EXTI" msgstr "Pin nummer al gereserveerd door EXTI" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "" "Pinout uses %d bytes per element, which consumes more than the ideal %d " "bytes. If this cannot be avoided, pass allow_inefficient=True to the " "constructor" msgstr "" "Pinout gebruikt %d bytes per element, welke meer dan de ideale %d bytes " "gebruikt. Als dit niet kan worden vermeden, geef dan het argument " "allow_inefficient=True aan de constructor" #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "En iedere module in het bestandssysteem\n" #: shared-module/vectorio/Polygon.c msgid "Polygon needs at least 3 points" msgstr "Polygon heeft op zijn minst 3 punten nodig" #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Prefix buffer moet op de heap zijn" #: main.c msgid "Press any key to enter the REPL. Use CTRL-D to reload." msgstr "" "Druk een willekeurige toets om de REPL te starten. Gebruik CTRL+D om te " "herstarten." #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull niet gebruikt wanneer de richting output is." #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit Fout" #: ports/stm/common-hal/os/__init__.c msgid "RNG Init Error" msgstr "RNG Init Fout" #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "RS485 inversie gespecificeerd terwijl niet in RS485 modus" #: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c #: ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "RTC calibratie niet ondersteund door dit board" #: shared-bindings/time/__init__.c msgid "RTC is not supported on this board" msgstr "RTC is niet ondersteund door dit board" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c #: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485 Nog niet ondersteund door dit apparaat" #: ports/stm/common-hal/os/__init__.c msgid "Random number generation error" msgstr "Random number generatie fout" #: shared-bindings/memorymonitor/AllocationSize.c #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "Alleen-lezen" #: extmod/vfs_fat.c py/moduerrno.c msgid "Read-only filesystem" msgstr "Alleen-lezen bestandssysteem" #: shared-module/displayio/Bitmap.c msgid "Read-only object" msgstr "Alleen-lezen object" #: shared-bindings/displayio/EPaperDisplay.c msgid "Refresh too soon" msgstr "Verversing te snel" #: shared-bindings/aesio/aes.c msgid "Requested AES mode is unsupported" msgstr "Gevraagde AES modus is niet ondersteund" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Right channel unsupported" msgstr "Rechter kanaal niet ondersteund" #: shared-bindings/_pew/PewPew.c msgid "Row entry must be digitalio.DigitalInOut" msgstr "Rij invoeging moet digitalio.DigitalInOut zijn" #: main.c msgid "Running in safe mode! " msgstr "" #: shared-module/sdcardio/SDCard.c msgid "SD card CSD format not supported" msgstr "SD kaart CSD formaat niet ondersteund" #: ports/atmel-samd/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA of SCL hebben een pullup nodig" #: ports/stm/common-hal/busio/SPI.c msgid "SPI Init Error" msgstr "SPI Init Fout" #: ports/stm/common-hal/busio/SPI.c msgid "SPI Re-initialization error" msgstr "SPI Herinitialisatie Fout" #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Sample rate moet positief zijn" #: ports/atmel-samd/common-hal/audioio/AudioOut.c #, c-format msgid "Sample rate too high. It must be less than %d" msgstr "Sample rate is te hoog. Moet minder dan %d zijn" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Scan already in progess. Stop with stop_scan." msgstr "Scan wordt al uitvoerd. Stop met stop_scan." #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Selected CTS pin not valid" msgstr "Geselecteerde CTS pin niet geldig" #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Selected RTS pin not valid" msgstr "Geselecteerde RTS pin niet geldig" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Serializer in use" msgstr "Serializer in gebruik" #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice en waarde hebben verschillende lengtes." #: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c #: shared-bindings/displayio/TileGrid.c #: shared-bindings/memorymonitor/AllocationSize.c #: shared-bindings/pulseio/PulseIn.c msgid "Slices not supported" msgstr "Slices niet ondersteund" #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "Bron en bestemming buffers moeten dezelfde lengte hebben" #: extmod/modure.c msgid "Splitting with sub-captures" msgstr "Splitting met sub-captures" #: shared-bindings/supervisor/__init__.c msgid "Stack size must be at least 256" msgstr "Stack grootte moet op zijn minst 256 zijn" #: shared-bindings/multiterminal/__init__.c msgid "Stream missing readinto() or write() method." msgstr "Stream mist readinto() of write() methode." #: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Supply at least one UART pin" msgstr "Geef op zijn minst 1 UART pin op" #: shared-bindings/gnss/GNSS.c msgid "System entry must be gnss.SatelliteSystem" msgstr "Systeem invoer moet gnss.SatelliteSystem zijn" #: ports/stm/common-hal/microcontroller/Processor.c msgid "Temperature read timed out" msgstr "Temperatuur lees time-out" #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" "Please increase the stack size if you know how, or if not:" msgstr "" "De CircuitPyton heap is corrupt omdat de stack te klein was.\n" "Vergroot de stack grootte als je weet hoe, zo niet:" #: supervisor/shared/safe_mode.c msgid "" "The `microcontroller` module was used to boot into safe mode. Press reset to " "exit safe mode.\n" msgstr "" "De `microcontroller` module is gebruikt om in veilige modus op te starten. " "Druk reset om de veilige modus te verlaten.\n" #: supervisor/shared/safe_mode.c msgid "" "The microcontroller's power dipped. Make sure your power supply provides\n" "enough power for the whole circuit and press reset (after ejecting " "CIRCUITPY).\n" msgstr "" "Het vermogen van de microcontroller zakte. Zorg ervoor dat de " "stroomvoorziening \n" "voldoende vermogen heeft voor het hele systeem en druk reset (na uitwerpen " "van CIRCUITPY).\n" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's bits_per_sample does not match the mixer's" msgstr "De sample's bits_per_sample komen niet overeen met die van de mixer" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's channel count does not match the mixer's" msgstr "De sample's kanaal aantal komt niet overeen met die van de mixer" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's sample rate does not match the mixer's" msgstr "De sample's sample rate komt niet overeen met die van de mixer" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's signedness does not match the mixer's" msgstr "De sample's signature komt niet overeen met die van de mixer" #: shared-bindings/displayio/TileGrid.c msgid "Tile height must exactly divide bitmap height" msgstr "Tile hoogte moet exact de bitmap hoogte verdelen" #: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c msgid "Tile index out of bounds" msgstr "Tile index buiten bereik" #: shared-bindings/displayio/TileGrid.c msgid "Tile value out of bounds" msgstr "Tile waarde buiten bereik" #: shared-bindings/displayio/TileGrid.c msgid "Tile width must exactly divide bitmap width" msgstr "Tile breedte moet exact de bitmap breedte verdelen" #: ports/nrf/common-hal/_bleio/Adapter.c #, c-format msgid "Timeout is too long: Maximum timeout length is %d seconds" msgstr "Time-out is te lang. Maximale time-out lengte is %d seconden" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "" "Timer was reserved for internal use - declare PWM pins earlier in the program" msgstr "" "Timer is gereserveerd voor intern gebruik - wijs PWM pins eerder in het " "programma toe" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "Teveel kanalen in sample." #: shared-module/displayio/__init__.c msgid "Too many display busses" msgstr "Teveel beeldscherm bussen" #: shared-module/displayio/__init__.c msgid "Too many displays" msgstr "Teveel beeldschermen" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Total data to write is larger than outgoing_packet_length" msgstr "Totale data om te schrijven is groter dan outgoing_packet_length" #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (meest recente call laatst):\n" #: shared-bindings/time/__init__.c msgid "Tuple or struct_time argument required" msgstr "Tuple of struct_time argument vereist" #: ports/stm/common-hal/busio/UART.c msgid "UART Buffer allocation error" msgstr "UART Buffer allocatie fout" #: ports/stm/common-hal/busio/UART.c msgid "UART De-init error" msgstr "UART De-init fout" #: ports/stm/common-hal/busio/UART.c msgid "UART Init Error" msgstr "UART Init Fout" #: ports/stm/common-hal/busio/UART.c msgid "UART Re-init error" msgstr "UART Re-init Fout" #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "UART schrijf fout" #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "USB Bezet" #: shared-module/usb_hid/Device.c msgid "USB Error" msgstr "USB Fout" #: shared-bindings/_bleio/UUID.c msgid "UUID integer value must be 0-0xffff" msgstr "UUID integer waarde moet tussen 0 en 0xffff liggen" #: shared-bindings/_bleio/UUID.c msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'" msgstr "UUID string is niet 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'" #: shared-bindings/_bleio/UUID.c msgid "UUID value is not str, int or byte buffer" msgstr "UUID waarde is geen str, int, of byte buffer" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Unable to allocate buffers for signed conversion" msgstr "Niet in staat buffers voor gesigneerde conversie te alloceren" #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" msgstr "Geen I2C beeldscherm gevonden bij %x" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Unable to find free GCLK" msgstr "Niet in staat een vrije GCLK te vinden" #: py/parse.c msgid "Unable to init parser" msgstr "Niet in staat om de parser te initialiseren" #: shared-module/displayio/OnDiskBitmap.c msgid "Unable to read color palette data" msgstr "Niet in staat kleurenpalet data te lezen" #: shared-bindings/nvm/ByteArray.c msgid "Unable to write to nvm." msgstr "Niet in staat om naar nvm te schrijven." #: ports/nrf/common-hal/_bleio/UUID.c msgid "Unexpected nrfx uuid type" msgstr "Onverwacht mrfx uuid type" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" msgstr "Onbekende gatt fout: 0x%04x" #: supervisor/shared/safe_mode.c msgid "Unknown reason." msgstr "Onbekende reden." #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown security error: 0x%04x" msgstr "Onbekende veiligheidsfout: 0x%04x" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown soft device error: %04x" msgstr "Onbekende soft device fout: %04x" #: shared-bindings/_pixelbuf/PixelBuf.c #, c-format msgid "Unmatched number of items on RHS (expected %d, got %d)." msgstr "Niet overeenkomend aantal RHS items (verwachtte %d, kreeg %d)." #: ports/nrf/common-hal/_bleio/__init__.c msgid "" "Unspecified issue. Can be that the pairing prompt on the other device was " "declined or ignored." msgstr "" "Ongespecificeerd probleem. Kan zijn dat de pariteit prompt op het andere " "apparaat geweigerd of genegeerd werd." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c #: ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Niet-ondersteunde baudsnelheid" #: shared-module/displayio/display_core.c msgid "Unsupported display bus type" msgstr "Niet-ondersteund beeldscherm bus type" #: shared-module/audiocore/WaveFile.c msgid "Unsupported format" msgstr "Niet-ondersteunde format" #: py/moduerrno.c msgid "Unsupported operation" msgstr "Niet-ondersteunde operatie" #: shared-bindings/digitalio/DigitalInOut.c msgid "Unsupported pull value." msgstr "Niet-ondersteunde pull-waarde." #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c msgid "Value length != required fixed length" msgstr "Waarde lengte != vereist vaste lengte" #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c msgid "Value length > max_length" msgstr "Waarde length > max_length" #: py/emitnative.c msgid "Viper functions don't currently support more than 4 arguments" msgstr "Viper-functies ondersteunen momenteel niet meer dan 4 argumenten" #: ports/stm/common-hal/microcontroller/Processor.c msgid "Voltage read timed out" msgstr "Voltage lees time-out" #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "WAARSCHUWING: De bestandsnaam van de code heeft twee extensies\n" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" "WatchDogTimer kan niet worden gedeïnitialiseerd zodra de modus in ingesteld " "op RESET" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer is not currently running" msgstr "WatchDogTimer is momenteel niet actief" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET" msgstr "" "WatchDogTimer.mode kan niet worden gewijzigd zodra de modus is ingesteld op " "WatchDogMode.RESET" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer.timeout must be greater than 0" msgstr "WatchDogTimer.timeout moet groter dan 0 zijn" #: supervisor/shared/safe_mode.c msgid "Watchdog timer expired." msgstr "Watchdog-timer verstreken." #: py/builtinhelp.c #, c-format msgid "" "Welcome to Adafruit CircuitPython %s!\n" "\n" "Please visit learn.adafruit.com/category/circuitpython for project guides.\n" "\n" "To list built-in modules please do `help(\"modules\")`.\n" msgstr "" "Welkom bij Adafruit CircuitPython %s!\n" "\n" "Bezoek learn.adafruit.com/category/circuitpython voor projectgidsen.\n" "\n" "Voor een lijst van ingebouwde modules, gebruik `help(\"modules\")`.\n" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "Schrijven niet ondersteund op Characteristic" #: supervisor/shared/safe_mode.c msgid "You are in safe mode: something unanticipated happened.\n" msgstr "Je bent in de veilige modus: er is iets onverwachts gebeurd.\n" #: supervisor/shared/safe_mode.c msgid "You requested starting safe mode by " msgstr "Je hebt aangeven de veilige modus te starten door " #: py/objtype.c msgid "__init__() should return None" msgstr "__init __ () zou None moeten retourneren" #: py/objtype.c msgid "__init__() should return None, not '%q'" msgstr "" #: py/objobject.c msgid "__new__ arg must be a user-type" msgstr "__new__ arg moet een user-type zijn" #: extmod/modubinascii.c extmod/moduhashlib.c py/objarray.c msgid "a bytes-like object is required" msgstr "een bytes-achtig object is vereist" #: lib/embed/abort_.c msgid "abort() called" msgstr "abort() aangeroepen" #: extmod/machine_mem.c #, c-format msgid "address %08x is not aligned to %d bytes" msgstr "adres %08x is niet afgestemd op %d bytes" #: shared-bindings/i2cperipheral/I2CPeripheral.c msgid "address out of bounds" msgstr "adres buiten bereik" #: shared-bindings/i2cperipheral/I2CPeripheral.c msgid "addresses is empty" msgstr "adressen zijn leeg" #: extmod/ulab/code/vector/vectorise.c msgid "arctan2 is implemented for scalars and ndarrays only" msgstr "arctan2 is alleen geïmplementeerd voor scalars en ndarrays" #: py/modbuiltins.c msgid "arg is an empty sequence" msgstr "arg is een lege sequentie" #: extmod/ulab/code/numerical/numerical.c msgid "argsort argument must be an ndarray" msgstr "argsort argument moet een ndarray zijn" #: py/runtime.c msgid "argument has wrong type" msgstr "argument heeft onjuist type" #: extmod/ulab/code/linalg/linalg.c msgid "argument must be ndarray" msgstr "argument moet ndarray zijn" #: py/argcheck.c shared-bindings/_stage/__init__.c #: shared-bindings/digitalio/DigitalInOut.c shared-bindings/gamepad/GamePad.c msgid "argument num/types mismatch" msgstr "argument num/typen komen niet overeen" #: py/runtime.c msgid "argument should be a '%q' not a '%q'" msgstr "argument moet een '%q' zijn en niet een '%q'" #: extmod/ulab/code/linalg/linalg.c msgid "arguments must be ndarrays" msgstr "argumenten moeten ndarrays zijn" #: py/objarray.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "array/bytes vereist aan de rechterkant" #: extmod/ulab/code/numerical/numerical.c msgid "attempt to get argmin/argmax of an empty sequence" msgstr "poging om argmin/argmax van een lege sequentie te krijgen" #: py/objstr.c msgid "attributes not supported yet" msgstr "attributen nog niet ondersteund" #: extmod/ulab/code/numerical/numerical.c msgid "axis must be -1, 0, None, or 1" msgstr "as moet -1, 0, None, of 1 zijn" #: extmod/ulab/code/numerical/numerical.c msgid "axis must be -1, 0, or 1" msgstr "as moet -1, 0, of 1 zijn" #: extmod/ulab/code/numerical/numerical.c msgid "axis must be None, 0, or 1" msgstr "as moet None, 0, of 1 zijn" #: py/builtinevex.c msgid "bad compile mode" msgstr "verkeerde compileer modus" #: py/objstr.c msgid "bad conversion specifier" msgstr "slechte conversie specificatie" #: py/objstr.c msgid "bad format string" msgstr "string met verkeerde indeling" #: py/binary.c msgid "bad typecode" msgstr "verkeerde typecode" #: py/emitnative.c msgid "binary op %q not implemented" msgstr "binaire op %q niet geïmplementeerd" #: shared-bindings/busio/UART.c msgid "bits must be 7, 8 or 9" msgstr "bits moet 7, 8, of 9 zijn" #: shared-bindings/audiomixer/Mixer.c msgid "bits_per_sample must be 8 or 16" msgstr "bits_per_sample moet 8 of 16 zijn" #: py/emitinlinethumb.c msgid "branch not in range" msgstr "pad (branch) niet binnen bereik" #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "buffer moet een byte-achtig object zijn" #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "grootte van de buffer moet overeenkomen met het formaat" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "buffer slices must be of equal length" msgstr "buffer slices moeten van gelijke grootte zijn" #: py/modstruct.c shared-bindings/struct/__init__.c #: shared-module/struct/__init__.c msgid "buffer too small" msgstr "buffer te klein" #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "buttons moeten digitalio.DigitalInOut zijn" #: py/vm.c msgid "byte code not implemented" msgstr "byte code niet geïmplementeerd" #: shared-bindings/_pixelbuf/PixelBuf.c msgid "byteorder is not a string" msgstr "byteorder is geen string" #: ports/atmel-samd/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "butes > 8 niet ondersteund" #: py/objstr.c msgid "bytes value out of range" msgstr "bytes waarde buiten bereik" #: ports/atmel-samd/bindings/samd/Clock.c ports/atmel-samd/common-hal/rtc/RTC.c msgid "calibration is out of range" msgstr "calibration is buiten bereik" #: ports/atmel-samd/bindings/samd/Clock.c msgid "calibration is read only" msgstr "calibration is alleen-lezen" #: ports/atmel-samd/common-hal/rtc/RTC.c msgid "calibration value out of range +/-127" msgstr "calibration waarde buiten bereik +/-127" #: py/emitinlinethumb.c msgid "can only have up to 4 parameters to Thumb assembly" msgstr "kan slechts 4 parameters aan Thumb assembly geven" #: py/emitinlinextensa.c msgid "can only have up to 4 parameters to Xtensa assembly" msgstr "kan slechts 4 parameters aan Xtensa assembly geven" #: py/persistentcode.c msgid "can only save bytecode" msgstr "kan alleen byte-code opslaan" #: py/objtype.c msgid "can't add special method to already-subclassed class" msgstr "" "kan geen speciale methode aan een al ge-subkwalificeerde klasse toevoegen" #: py/compile.c msgid "can't assign to expression" msgstr "kan niet toewijzen aan expressie" #: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c msgid "can't convert %q to %q" msgstr "" #: py/objstr.c msgid "can't convert '%q' object to %q implicitly" msgstr "kan '%q' object niet omzetten naar %q impliciet" #: py/obj.c msgid "can't convert to %q" msgstr "" #: py/objstr.c msgid "can't convert to str implicitly" msgstr "kan niet omzetten naar str impliciet" #: py/compile.c msgid "can't declare nonlocal in outer code" msgstr "kan geen nonlocal in buitenste code declareren" #: py/compile.c msgid "can't delete expression" msgstr "kan expressie niet verwijderen" #: py/emitnative.c msgid "can't do binary op between '%q' and '%q'" msgstr "kan geen een binaire operatie doen tussen '%q' en '%q'" #: py/objcomplex.c msgid "can't do truncated division of a complex number" msgstr "kan geen afgekapte deling doen van een comlex nummer" #: py/compile.c msgid "can't have multiple **x" msgstr "kan niet meerdere **x hebben" #: py/compile.c msgid "can't have multiple *x" msgstr "kan geen meerdere *x hebben" #: py/emitnative.c msgid "can't implicitly convert '%q' to 'bool'" msgstr "kan '%q niet impliciet converteren naar 'bool'" #: py/emitnative.c msgid "can't load from '%q'" msgstr "kan niet laden van '%q'" #: py/emitnative.c msgid "can't load with '%q' index" msgstr "kan niet met '%q' index laden" #: py/objgenerator.c msgid "can't pend throw to just-started generator" msgstr "kan throw niet aan net gestartte generator toevoegen" #: py/objgenerator.c msgid "can't send non-None value to a just-started generator" msgstr "kan geen niet-'None' waarde naar een net gestartte generator sturen" #: shared-module/sdcardio/SDCard.c msgid "can't set 512 block size" msgstr "kan geen 512 blokgrootte instellen" #: py/objnamedtuple.c msgid "can't set attribute" msgstr "kan attribute niet instellen" #: py/emitnative.c msgid "can't store '%q'" msgstr "kan '%q' niet opslaan" #: py/emitnative.c msgid "can't store to '%q'" msgstr "kan niet naar '%q' opslaan" #: py/emitnative.c msgid "can't store with '%q' index" msgstr "kan niet opslaan met '%q' als index" #: py/objstr.c msgid "" "can't switch from automatic field numbering to manual field specification" msgstr "kan niet schakelen tussen automatische en handmatige veld specificatie" #: py/objstr.c msgid "" "can't switch from manual field specification to automatic field numbering" msgstr "kan niet schakelen tussen handmatige en automatische veld specificatie" #: py/objtype.c msgid "cannot create '%q' instances" msgstr "kan geen instanties van '%q' creëren" #: py/objtype.c msgid "cannot create instance" msgstr "kan geen instantie creëren" #: py/runtime.c msgid "cannot import name %q" msgstr "kan naam %q niet importeren" #: py/builtinimport.c msgid "cannot perform relative import" msgstr "kan geen relatieve import uitvoeren" #: extmod/ulab/code/ndarray.c msgid "cannot reshape array (incompatible input/output shape)" msgstr "kan de array niet hervormen (niet verenigbare input/output vorm)" #: py/emitnative.c msgid "casting" msgstr "casting" #: shared-bindings/_stage/Text.c msgid "chars buffer too small" msgstr "chars buffer te klein" #: py/modbuiltins.c msgid "chr() arg not in range(0x110000)" msgstr "chr() arg niet binnen bereik (0x110000)" #: py/modbuiltins.c msgid "chr() arg not in range(256)" msgstr "chr() arg niet binnen bereik (256)" #: shared-module/vectorio/Circle.c msgid "circle can only be registered in one parent" msgstr "" "cirkel kan slechts bij één object van een hoger niveau worden geregistreerd" #: shared-bindings/displayio/Palette.c msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)" msgstr "kleurbuffer moet 3 bytes (RGB) of 4 bytes (RGB + pad byte) zijn" #: shared-bindings/displayio/Palette.c msgid "color buffer must be a buffer, tuple, list, or int" msgstr "kleurbuffer moet een buffer, tuple, list, of int zijn" #: shared-bindings/displayio/Palette.c msgid "color buffer must be a bytearray or array of type 'b' or 'B'" msgstr "kleurbuffer moet een bytearray of array van type 'b' of 'B' zijn" #: shared-bindings/displayio/Palette.c msgid "color must be between 0x000000 and 0xffffff" msgstr "kleur moet tussen 0x000000 en 0xffffff liggen" #: shared-bindings/displayio/ColorConverter.c msgid "color should be an int" msgstr "kleur moet een int zijn" #: py/objcomplex.c msgid "complex division by zero" msgstr "complexe deling door 0" #: py/objfloat.c py/parsenum.c msgid "complex values not supported" msgstr "complexe waardes niet ondersteund" #: extmod/moduzlib.c msgid "compression header" msgstr "compressie header" #: py/parse.c msgid "constant must be an integer" msgstr "constant moet een integer zijn" #: py/emitnative.c msgid "conversion to object" msgstr "conversie naar object" #: extmod/ulab/code/filter/filter.c msgid "convolve arguments must be linear arrays" msgstr "convolutie argumenten moeten lineaire arrays zijn" #: extmod/ulab/code/filter/filter.c msgid "convolve arguments must be ndarrays" msgstr "convolutie argumenten moeten ndarrays zijn" #: extmod/ulab/code/filter/filter.c msgid "convolve arguments must not be empty" msgstr "convolutie argumenten mogen niet leeg zijn" #: extmod/ulab/code/ndarray.c msgid "could not broadast input array from shape" msgstr "kon de invoerarray niet vanuit vorm uitzenden" #: extmod/ulab/code/poly/poly.c msgid "could not invert Vandermonde matrix" msgstr "kon de Vandermonde matrix niet omkeren" #: shared-module/sdcardio/SDCard.c msgid "couldn't determine SD card version" msgstr "kon SD kaart versie niet bepalen" #: extmod/ulab/code/approx/approx.c msgid "data must be iterable" msgstr "data moet itereerbaar zijn" #: extmod/ulab/code/approx/approx.c msgid "data must be of equal length" msgstr "data moet van gelijke lengte zijn" #: extmod/ulab/code/numerical/numerical.c msgid "ddof must be smaller than length of data set" msgstr "ddof kleiner dan de lengte van de data set" #: py/parsenum.c msgid "decimal numbers not supported" msgstr "decimale getallen zijn niet ondersteund" #: py/compile.c msgid "default 'except' must be last" msgstr "standaard 'expect' moet laatste zijn" #: shared-bindings/audiobusio/PDMIn.c msgid "" "destination buffer must be a bytearray or array of type 'B' for bit_depth = 8" msgstr "" "bestemming buffer moet een bytearray of array van het type 'B' voor " "bit_depth = 8" #: shared-bindings/audiobusio/PDMIn.c msgid "destination buffer must be an array of type 'H' for bit_depth = 16" msgstr "bestemming buffer moet een array van het type 'H' voor bit_depth = 16" #: shared-bindings/audiobusio/PDMIn.c msgid "destination_length must be an int >= 0" msgstr "destination_lengte moest een int groter dan of gelijk zijn aan 0 zijn" #: py/objdict.c msgid "dict update sequence has wrong length" msgstr "dict update sequence heeft de verkeerde lengte" #: extmod/ulab/code/numerical/numerical.c msgid "diff argument must be an ndarray" msgstr "diff argument moet een ndarray zijn" #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c #: shared-bindings/math/__init__.c msgid "division by zero" msgstr "deling door nul" #: py/objdeque.c msgid "empty" msgstr "leeg" #: extmod/moduheapq.c extmod/modutimeq.c msgid "empty heap" msgstr "lege heap" #: py/objstr.c msgid "empty separator" msgstr "lege seperator" #: shared-bindings/random/__init__.c msgid "empty sequence" msgstr "lege sequentie" #: py/objstr.c msgid "end of format while looking for conversion specifier" msgstr "einde van format terwijl zoekend naar conversie-specifier" #: shared-bindings/displayio/Shape.c msgid "end_x should be an int" msgstr "end_x moet een int zijn" #: ports/nrf/common-hal/busio/UART.c #, c-format msgid "error = 0x%08lX" msgstr "fout = 0x%08lX" #: py/runtime.c msgid "exceptions must derive from BaseException" msgstr "uitzonderingen moeten afleiden van BaseException" #: py/objstr.c msgid "expected ':' after format specifier" msgstr "verwachtte ':' na format specifier" #: py/obj.c msgid "expected tuple/list" msgstr "verwachtte een tuple/lijst" #: py/modthread.c msgid "expecting a dict for keyword args" msgstr "verwacht een dict voor keyword argumenten" #: py/compile.c msgid "expecting an assembler instruction" msgstr "verwacht een assembler instructie" #: py/compile.c msgid "expecting just a value for set" msgstr "verwacht alleen een waarde voor set" #: py/compile.c msgid "expecting key:value for dict" msgstr "verwacht key:waarde for dict" #: py/argcheck.c msgid "extra keyword arguments given" msgstr "extra keyword argumenten gegeven" #: py/argcheck.c msgid "extra positional arguments given" msgstr "extra positionele argumenten gegeven" #: py/parse.c msgid "f-string expression part cannot include a '#'" msgstr "f-string expressie deel kan geen '#' bevatten" #: py/parse.c msgid "f-string expression part cannot include a backslash" msgstr "f-string expressie deel kan geen backslash bevatten" #: py/parse.c msgid "f-string: empty expression not allowed" msgstr "f-string: lege expressie niet toegestaan" #: py/parse.c msgid "f-string: expecting '}'" msgstr "f-string: verwacht '}'" #: py/parse.c msgid "f-string: single '}' is not allowed" msgstr "f-string: enkele '}' is niet toegestaan" #: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c #: shared-bindings/displayio/OnDiskBitmap.c msgid "file must be a file opened in byte mode" msgstr "bestand moet een bestand zijn geopend in byte modus" #: shared-bindings/storage/__init__.c msgid "filesystem must provide mount method" msgstr "bestandssysteem moet een mount methode bieden" #: extmod/ulab/code/vector/vectorise.c msgid "first argument must be a callable" msgstr "eerste argument moet een aanroepbare (callable) zijn" #: extmod/ulab/code/approx/approx.c msgid "first argument must be a function" msgstr "eerste argument moet een functie zijn" #: extmod/ulab/code/ndarray.c msgid "first argument must be an iterable" msgstr "eerst argument moet een iterabel zijn" #: extmod/ulab/code/vector/vectorise.c msgid "first argument must be an ndarray" msgstr "eerst argument moet een ndarray zijn" #: py/objtype.c msgid "first argument to super() must be type" msgstr "eerste argument voor super() moet een type zijn" #: extmod/ulab/code/ndarray.c msgid "flattening order must be either 'C', or 'F'" msgstr "De afvlakkingsvolgorde moet ofwel \"C\", ofwel \"F\" zijn" #: extmod/ulab/code/numerical/numerical.c msgid "flip argument must be an ndarray" msgstr "flip argumenten moeten een ndarray zijn" #: py/objint.c msgid "float too big" msgstr "float is te groot" #: shared-bindings/_stage/Text.c msgid "font must be 2048 bytes long" msgstr "lettertype moet 2048 bytes lang zijn" #: py/objstr.c msgid "format requires a dict" msgstr "format vereist een dict" #: py/objdeque.c msgid "full" msgstr "vol" #: py/argcheck.c msgid "function does not take keyword arguments" msgstr "functie accepteert geen keyword argumenten" #: py/argcheck.c #, c-format msgid "function expected at most %d arguments, got %d" msgstr "functie verwachtte op zijn meest %d argumenten, maar kreeg %d" #: py/bc.c py/objnamedtuple.c msgid "function got multiple values for argument '%q'" msgstr "functie kreeg meedere waarden voor argument '%q'" #: extmod/ulab/code/approx/approx.c msgid "function has the same sign at the ends of interval" msgstr "functie heeft hetzelfde teken aan beide uiteinden van het interval" #: extmod/ulab/code/compare/compare.c msgid "function is implemented for scalars and ndarrays only" msgstr "funtie is alleen geïmplementeerd voor scalars en ndarrays" #: py/argcheck.c #, c-format msgid "function missing %d required positional arguments" msgstr "functie mist %d vereist positionele argumenten" #: py/bc.c msgid "function missing keyword-only argument" msgstr "functie mist keyword-only argument" #: py/bc.c msgid "function missing required keyword argument '%q'" msgstr "functie mist vereist sleutelwoord argument \"%q" #: py/bc.c #, c-format msgid "function missing required positional argument #%d" msgstr "functie mist vereist positie-argument #%d" #: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/time/__init__.c #, c-format msgid "function takes %d positional arguments but %d were given" msgstr "" "functie vraagt %d argumenten zonder keyword maar %d argumenten werden gegeven" #: shared-bindings/time/__init__.c msgid "function takes exactly 9 arguments" msgstr "functie vraagt precies 9 argumenten" #: py/objgenerator.c msgid "generator already executing" msgstr "generator wordt al uitgevoerd" #: py/objgenerator.c msgid "generator ignored GeneratorExit" msgstr "generator negeerde GeneratorExit" #: shared-bindings/_stage/Layer.c msgid "graphic must be 2048 bytes long" msgstr "graphic moet 2048 bytes lang zijn" #: extmod/moduheapq.c msgid "heap must be a list" msgstr "heap moet een lijst zijn" #: py/compile.c msgid "identifier redefined as global" msgstr "identifier is opnieuw gedefinieerd als global" #: py/compile.c msgid "identifier redefined as nonlocal" msgstr "identifier is opnieuw gedefinieerd als nonlocal" #: py/objstr.c msgid "incomplete format" msgstr "incompleet formaat" #: py/objstr.c msgid "incomplete format key" msgstr "incomplete formaatsleutel" #: extmod/modubinascii.c msgid "incorrect padding" msgstr "vulling (padding) is onjuist" #: extmod/ulab/code/ndarray.c msgid "index is out of bounds" msgstr "index is buiten bereik" #: py/obj.c msgid "index out of range" msgstr "index is buiten bereik" #: py/obj.c msgid "indices must be integers" msgstr "indices moeten integers zijn" #: extmod/ulab/code/ndarray.c msgid "indices must be integers, slices, or Boolean lists" msgstr "indices moeten integers, segmenten (slices) of Boolean lijsten zijn" #: extmod/ulab/code/approx/approx.c msgid "initial values must be iterable" msgstr "oorspronkelijke waarden moeten itereerbaar zijn" #: py/compile.c msgid "inline assembler must be a function" msgstr "inline assembler moet een functie zijn" #: extmod/ulab/code/ulab_create.c msgid "input argument must be an integer or a 2-tuple" msgstr "invoerargument moet een integer of 2-tuple zijn" #: extmod/ulab/code/fft/fft.c msgid "input array length must be power of 2" msgstr "invoer array lengte moet een macht van 2 zijn" #: extmod/ulab/code/poly/poly.c msgid "input data must be an iterable" msgstr "invoerdata moet itereerbaar zijn" #: extmod/ulab/code/linalg/linalg.c msgid "input matrix is asymmetric" msgstr "invoermatrix is asymmetrisch" #: extmod/ulab/code/linalg/linalg.c msgid "input matrix is singular" msgstr "invoermatrix is singulier" #: extmod/ulab/code/linalg/linalg.c msgid "input must be square matrix" msgstr "invoer moet een vierkante matrix zijn" #: extmod/ulab/code/numerical/numerical.c msgid "input must be tuple, list, range, or ndarray" msgstr "invoer moet een tuple, lijst, bereik of ndarray zijn" #: extmod/ulab/code/poly/poly.c msgid "input vectors must be of equal length" msgstr "invoervectors moeten van gelijke lengte zijn" #: py/parsenum.c msgid "int() arg 2 must be >= 2 and <= 36" msgstr "int() argument 2 moet >=2 en <= 36 zijn" #: py/objstr.c msgid "integer required" msgstr "integer vereist" #: extmod/ulab/code/approx/approx.c msgid "interp is defined for 1D arrays of equal length" msgstr "interp is gedefinieerd voor eendimensionale arrays van gelijke lengte" #: shared-bindings/_bleio/Adapter.c #, c-format msgid "interval must be in range %s-%s" msgstr "interval moet binnen bereik %s-%s vallen" #: lib/netutils/netutils.c msgid "invalid arguments" msgstr "ongeldige argumenten" #: extmod/modussl_axtls.c msgid "invalid cert" msgstr "ongeldig certificaat" #: extmod/uos_dupterm.c msgid "invalid dupterm index" msgstr "ongeldige dupterm index" #: extmod/modframebuf.c msgid "invalid format" msgstr "ongeldig formaat" #: py/objstr.c msgid "invalid format specifier" msgstr "ongeldige formaatspecificatie" #: extmod/modussl_axtls.c msgid "invalid key" msgstr "ongeldige sleutel" #: py/compile.c msgid "invalid micropython decorator" msgstr "ongeldige micropython decorator" #: shared-bindings/random/__init__.c msgid "invalid step" msgstr "ongeldige stap" #: py/compile.c py/parse.c msgid "invalid syntax" msgstr "ongeldige syntax" #: py/parsenum.c msgid "invalid syntax for integer" msgstr "ongeldige syntax voor integer" #: py/parsenum.c #, c-format msgid "invalid syntax for integer with base %d" msgstr "ongeldige syntax voor integer met grondtal %d" #: py/parsenum.c msgid "invalid syntax for number" msgstr "ongeldige syntax voor nummer" #: py/objtype.c msgid "issubclass() arg 1 must be a class" msgstr "issubclass() argument 1 moet een klasse zijn" #: py/objtype.c msgid "issubclass() arg 2 must be a class or a tuple of classes" msgstr "issubclass() argument 2 moet een klasse of tuple van klassen zijn" #: extmod/ulab/code/ndarray.c msgid "iterables are not of the same length" msgstr "itereerbare objecten hebben niet dezelfde lengte" #: extmod/ulab/code/linalg/linalg.c msgid "iterations did not converge" msgstr "itereerbare objecten convergeren niet" #: py/objstr.c msgid "join expects a list of str/bytes objects consistent with self object" msgstr "" "join verwacht een lijst van str/byte objecten die consistent zijn met het " "self-object" #: py/argcheck.c msgid "keyword argument(s) not yet implemented - use normal args instead" msgstr "" "trefwoord argument(en) zijn niet geïmplementeerd, gebruik normale argumenten" #: py/bc.c msgid "keywords must be strings" msgstr "trefwoorden moeten van type string zijn" #: py/emitinlinethumb.c py/emitinlinextensa.c msgid "label '%q' not defined" msgstr "label '%q' is niet gedefinieerd" #: py/compile.c msgid "label redefined" msgstr "label opnieuw gedefinieerd" #: py/stream.c msgid "length argument not allowed for this type" msgstr "voor dit type is length niet toegestaan" #: shared-bindings/audiomixer/MixerVoice.c msgid "level must be between 0 and 1" msgstr "level moet tussen 0 en 1 liggen" #: py/objarray.c msgid "lhs and rhs should be compatible" msgstr "lhs en rhs moeten compatibel zijn" #: py/emitnative.c msgid "local '%q' has type '%q' but source is '%q'" msgstr "lokale '%q' is van type '%q' maar bron is '%q'" #: py/emitnative.c msgid "local '%q' used before type known" msgstr "lokale '%q' gebruikt voordat type bekend is" #: py/vm.c msgid "local variable referenced before assignment" msgstr "verwijzing naar een (nog) niet toegewezen lokale variabele" #: py/objint.c msgid "long int not supported in this build" msgstr "long int wordt niet ondersteund in deze build" #: py/parse.c msgid "malformed f-string" msgstr "onjuist gevormde f-string" #: shared-bindings/_stage/Layer.c msgid "map buffer too small" msgstr "map buffer te klein" #: py/modmath.c shared-bindings/math/__init__.c msgid "math domain error" msgstr "fout in het wiskundig domein (math domain error)" #: extmod/ulab/code/linalg/linalg.c msgid "matrix dimensions do not match" msgstr "matrix afmetingen komen niet overeen" #: extmod/ulab/code/linalg/linalg.c msgid "matrix is not positive definite" msgstr "matrix is niet positief-definiet" #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c #, c-format msgid "max_length must be 0-%d when fixed_length is %s" msgstr "max_length moet 0-%d zijn als fixed_length %s is" #: py/runtime.c msgid "maximum recursion depth exceeded" msgstr "maximale recursiediepte overschreden" #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" msgstr "geheugentoewijzing mislukt, %u bytes worden toegewezen" #: py/runtime.c msgid "memory allocation failed, heap is locked" msgstr "geheugentoewijzing mislukt, heap is vergrendeld" #: py/builtinimport.c msgid "module not found" msgstr "module niet gevonden" #: extmod/ulab/code/poly/poly.c msgid "more degrees of freedom than data points" msgstr "meer vrijheidsgraden dan datapunten" #: py/compile.c msgid "multiple *x in assignment" msgstr "meerdere *x in toewijzing" #: py/objtype.c msgid "multiple bases have instance lay-out conflict" msgstr "meerdere grondtallen (bases) hebben instance lay-out conflicten" #: py/objtype.c msgid "multiple inheritance not supported" msgstr "meervoudige overerving niet ondersteund" #: py/emitnative.c msgid "must raise an object" msgstr "moet een object oproepen (raise)" #: py/modbuiltins.c msgid "must use keyword argument for key function" msgstr "voor sleutelfunctie moet een trefwoordargument gebruikt worden" #: extmod/ulab/code/numerical/numerical.c msgid "n must be between 0, and 9" msgstr "n moet tussen 0 en 9 liggen" #: py/runtime.c msgid "name '%q' is not defined" msgstr "naam '%q' is niet gedefinieerd" #: py/runtime.c msgid "name not defined" msgstr "naam is niet gedefinieerd" #: py/compile.c msgid "name reused for argument" msgstr "naam hergebruikt voor argument" #: py/emitnative.c msgid "native yield" msgstr "natuurlijke opbrengst (native yield)" #: py/runtime.c #, c-format msgid "need more than %d values to unpack" msgstr "Om uit te pakken zijn meer dan %d waarden vereist" #: py/objint_longlong.c py/objint_mpz.c py/runtime.c msgid "negative power with no float support" msgstr "negatieve macht terwijl er geen ondersteuning is voor float" #: py/objint_mpz.c py/runtime.c msgid "negative shift count" msgstr "negatieve verschuivingstelling (shift count)" #: shared-module/sdcardio/SDCard.c msgid "no SD card" msgstr "geen SD kaart" #: py/vm.c msgid "no active exception to reraise" msgstr "geen actieve uitzondering om opnieuw op te werpen (raise)" #: shared-bindings/socket/__init__.c shared-module/network/__init__.c msgid "no available NIC" msgstr "geen netwerkadapter (NIC) beschikbaar" #: py/compile.c msgid "no binding for nonlocal found" msgstr "geen binding voor nonlocal gevonden" #: py/builtinimport.c msgid "no module named '%q'" msgstr "geen module met naam '%q'" #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c #: shared-bindings/displayio/ParallelBus.c msgid "no reset pin available" msgstr "geen reset pin beschikbaar" #: shared-module/sdcardio/SDCard.c msgid "no response from SD card" msgstr "geen antwoord van SD kaart" #: py/runtime.c msgid "no such attribute" msgstr "niet zo'n attribuut" #: ports/nrf/common-hal/_bleio/Connection.c msgid "non-UUID found in service_uuids_whitelist" msgstr "niet-UUID gevonden in service_uuids_whitelist" #: py/compile.c msgid "non-default argument follows default argument" msgstr "niet-standaard argument volgt op een standaard argument" #: extmod/modubinascii.c msgid "non-hex digit found" msgstr "er werd een niet-hexadecimaal cijfer gevonden" #: py/compile.c msgid "non-keyword arg after */**" msgstr "niet-trefwoord argument na */**" #: py/compile.c msgid "non-keyword arg after keyword arg" msgstr "niet-trefwoord argument na trefwoord argument" #: shared-bindings/_bleio/UUID.c msgid "not a 128-bit UUID" msgstr "geen 128-bit UUID" #: py/objstr.c msgid "not all arguments converted during string formatting" msgstr "niet alle argumenten omgezet bij formattering van string" #: py/objstr.c msgid "not enough arguments for format string" msgstr "niet genoeg argumenten om string te formatteren" #: extmod/ulab/code/poly/poly.c msgid "number of arguments must be 2, or 3" msgstr "aantal argumenten moet 2 of 3 zijn" #: extmod/ulab/code/ulab_create.c msgid "number of points must be at least 2" msgstr "aantal punten moet minimaal 2 zijn" #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "" #: py/obj.c msgid "object does not support item assignment" msgstr "object ondersteund toewijzen van elementen niet" #: py/obj.c msgid "object does not support item deletion" msgstr "object ondersteund verwijderen van elementen niet" #: py/obj.c msgid "object has no len" msgstr "object heeft geen len" #: py/obj.c msgid "object is not subscriptable" msgstr "object heeft geen '__getitem__'-methode (not subscriptable)" #: py/runtime.c msgid "object not an iterator" msgstr "object is geen iterator" #: py/objtype.c py/runtime.c msgid "object not callable" msgstr "object niet aanroepbaar" #: py/sequence.c shared-bindings/displayio/Group.c msgid "object not in sequence" msgstr "object niet in volgorde (sequence)" #: py/runtime.c msgid "object not iterable" msgstr "object niet itereerbaar" #: py/obj.c msgid "object of type '%q' has no len()" msgstr "" #: py/obj.c msgid "object with buffer protocol required" msgstr "object met buffer protocol vereist" #: extmod/modubinascii.c msgid "odd-length string" msgstr "string met oneven lengte" #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "offset buiten bereik" #: ports/nrf/common-hal/audiobusio/PDMIn.c msgid "only bit_depth=16 is supported" msgstr "alleen bit_depth=16 wordt ondersteund" #: ports/nrf/common-hal/audiobusio/PDMIn.c msgid "only sample_rate=16000 is supported" msgstr "alleen sample_rate=16000 wordt ondersteund" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "alleen segmenten met step=1 (ook wel None) worden ondersteund" #: extmod/ulab/code/compare/compare.c extmod/ulab/code/ndarray.c #: extmod/ulab/code/vector/vectorise.c msgid "operands could not be broadcast together" msgstr "operands konden niet samen verzonden worden" #: extmod/ulab/code/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "bewerking is voor ndarrays niet geïmplementeerd" #: extmod/ulab/code/ndarray.c msgid "operation is not supported for given type" msgstr "bewerking wordt niet ondersteund voor dit type" #: py/modbuiltins.c msgid "ord expects a character" msgstr "ord verwacht een teken (char)" #: py/modbuiltins.c #, c-format msgid "ord() expected a character, but string of length %d found" msgstr "ord() verwacht een teken (char) maar vond een string van lengte %d" #: py/objint_mpz.c msgid "overflow converting long int to machine word" msgstr "overloop bij converteren van long int naar machine word" #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "palette moet 32 bytes lang zijn" #: shared-bindings/displayio/Palette.c msgid "palette_index should be an int" msgstr "palette_index moet een int zijn" #: py/compile.c msgid "parameter annotation must be an identifier" msgstr "parameter annotatie moet een identifier zijn" #: py/emitinlinextensa.c msgid "parameters must be registers in sequence a2 to a5" msgstr "parameters moeten registers zijn in de volgorde a2 tot a5" #: py/emitinlinethumb.c msgid "parameters must be registers in sequence r0 to r3" msgstr "parameters moeten registers zijn in de volgorde r0 tot r3" #: shared-bindings/displayio/Bitmap.c msgid "pixel coordinates out of bounds" msgstr "pixel coördinaten buiten bereik" #: shared-bindings/displayio/Bitmap.c msgid "pixel value requires too many bits" msgstr "pixel waarde vereist te veel bits" #: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter" msgstr "pixel_shader moet displayio.Palette of displayio.ColorConverter zijn" #: shared-module/vectorio/Polygon.c msgid "polygon can only be registered in one parent" msgstr "" "polygoon kan slechts bij één object van een hoger niveau worden geregistreerd" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c py/objdict.c py/objlist.c py/objset.c #: shared-bindings/ps2io/Ps2.c msgid "pop from empty %q" msgstr "" #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "derde argument van pow() mag geen 0 zijn" #: py/objint_mpz.c msgid "pow() with 3 arguments requires integers" msgstr "pow() met 3 argumenten vereist integers" #: extmod/modutimeq.c msgid "queue overflow" msgstr "wachtrij overloop" #: py/parse.c msgid "raw f-strings are not implemented" msgstr "ruwe f-strings zijn niet geïmplementeerd" #: extmod/ulab/code/fft/fft.c msgid "real and imaginary parts must be of equal length" msgstr "reëel en imaginair deel moeten gelijke lengte hebben" #: py/builtinimport.c msgid "relative import" msgstr "relatieve import" #: py/obj.c #, c-format msgid "requested length %d but object has length %d" msgstr "gevraagde lengte is %d maar object heeft lengte %d" #: py/compile.c msgid "return annotation must be an identifier" msgstr "return annotatie moet een identifier zijn" #: py/emitnative.c msgid "return expected '%q' but got '%q'" msgstr "return verwacht '%q' maar ontving '%q'" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "rgb_pins[%d] duplicates another pin assignment" msgstr "rgb_pins[%d] is hetzelfde als een andere pintoewijzing" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "rgb_pins[%d] is not on the same port as clock" msgstr "rgb_pins[%d] bevindt zich niet op dezelfde poort als klok" #: extmod/ulab/code/ndarray.c msgid "right hand side must be an ndarray, or a scalar" msgstr "de rechterkant moet een ndarray of scalar zijn" #: py/objstr.c msgid "rsplit(None,n)" msgstr "rsplit(None,n)" #: shared-bindings/audiocore/RawSample.c msgid "" "sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or " "'B'" msgstr "" "sample_source buffer moet een bytearray of array van type 'h', 'H', 'b' of " "'B' zijn" #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "sampling rate out of range" msgstr "bemonsteringssnelheid buiten bereik" #: py/modmicropython.c msgid "schedule stack full" msgstr "schedule stack is vol" #: lib/utils/pyexec.c py/builtinimport.c msgid "script compilation not supported" msgstr "scriptcompilatie wordt niet ondersteund" #: extmod/ulab/code/ndarray.c msgid "shape must be a 2-tuple" msgstr "vorm moet een 2-tuple zijn" #: py/objstr.c msgid "sign not allowed in string format specifier" msgstr "teken niet toegestaan in string formaatspecificatie" #: py/objstr.c msgid "sign not allowed with integer format specifier 'c'" msgstr "teken niet toegestaan bij integer formaatspecificatie 'c'" #: py/objstr.c msgid "single '}' encountered in format string" msgstr "enkele '}' aangetroffen in formaat tekenreeks (string)" #: extmod/ulab/code/linalg/linalg.c msgid "size is defined for ndarrays only" msgstr "omvang is alleen voor ndarrays gedefinieerd" #: shared-bindings/time/__init__.c msgid "sleep length must be non-negative" msgstr "de slaapduur mag niet negatief zijn" #: extmod/ulab/code/ndarray.c msgid "slice step can't be zero" msgstr "segmentstap mag niet nul zijn" #: py/objslice.c py/sequence.c msgid "slice step cannot be zero" msgstr "segmentstap mag niet nul zijn" #: py/objint.c py/sequence.c msgid "small int overflow" msgstr "small int overloop" #: main.c msgid "soft reboot\n" msgstr "zachte herstart\n" #: extmod/ulab/code/numerical/numerical.c msgid "sort argument must be an ndarray" msgstr "sorteerargument moet een ndarray zijn" #: extmod/ulab/code/filter/filter.c msgid "sos array must be of shape (n_section, 6)" msgstr "sos array moet vorm (n_section, 6) hebben" #: extmod/ulab/code/filter/filter.c msgid "sos[:, 3] should be all ones" msgstr "sos[:, 3] moeten allemaal 1 zijn" #: extmod/ulab/code/filter/filter.c msgid "sosfilt requires iterable arguments" msgstr "sosfilt vereist itereerbare argumenten" #: py/objstr.c msgid "start/end indices" msgstr "start/stop indices" #: shared-bindings/displayio/Shape.c msgid "start_x should be an int" msgstr "start_x moet een int zijn" #: shared-bindings/random/__init__.c msgid "step must be non-zero" msgstr "step mag geen nul zijn" #: shared-bindings/busio/UART.c msgid "stop must be 1 or 2" msgstr "stop moet 1 of 2 zijn" #: shared-bindings/random/__init__.c msgid "stop not reachable from start" msgstr "stop is niet bereikbaar vanaf start" #: py/stream.c msgid "stream operation not supported" msgstr "stream operatie niet ondersteund" #: py/objstrunicode.c msgid "string indices must be integers, not %q" msgstr "" #: py/stream.c msgid "string not supported; use bytes or bytearray" msgstr "string niet ondersteund; gebruik bytes of bytearray" #: extmod/moductypes.c msgid "struct: cannot index" msgstr "struct: kan niet indexeren" #: extmod/moductypes.c msgid "struct: no fields" msgstr "struct: geen velden" #: py/objarray.c py/objstr.c msgid "substring not found" msgstr "deelreeks niet gevonden" #: py/compile.c msgid "super() can't find self" msgstr "super() kan self niet vinden" #: extmod/modujson.c msgid "syntax error in JSON" msgstr "syntaxisfout in JSON" #: extmod/moductypes.c msgid "syntax error in uctypes descriptor" msgstr "syntaxisfout in uctypes aanduiding" #: shared-bindings/touchio/TouchIn.c msgid "threshold must be in the range 0-65536" msgstr "drempelwaarde moet in het bereik 0-65536 liggen" #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() accepteert een 9-rij" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "time-outduur is groter dan de ondersteunde maximale waarde" #: shared-bindings/busio/UART.c msgid "timeout must be 0.0-100.0 seconds" msgstr "timeout moet tussen 0.0 en 100.0 seconden zijn" #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "timeout must be >= 0.0" msgstr "timeout moet groter dan 0.0 zijn" #: shared-module/sdcardio/SDCard.c msgid "timeout waiting for v1 card" msgstr "timeout bij wachten op v1 kaart" #: shared-module/sdcardio/SDCard.c msgid "timeout waiting for v2 card" msgstr "timeout bij wachten op v2 kaart" #: shared-bindings/time/__init__.c msgid "timestamp out of range for platform time_t" msgstr "timestamp buiten bereik voor platform time_t" #: shared-module/struct/__init__.c msgid "too many arguments provided with the given format" msgstr "te veel argumenten opgegeven bij dit formaat" #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "te veel indices" #: py/runtime.c #, c-format msgid "too many values to unpack (expected %d)" msgstr "te veel waarden om uit te pakken (%d verwacht)" #: extmod/ulab/code/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "trapz is gedefinieerd voor eendimensionale arrays van gelijke lengte" #: extmod/ulab/code/linalg/linalg.c msgid "tuple index out of range" msgstr "tuple index buiten bereik" #: py/obj.c msgid "tuple/list has wrong length" msgstr "tuple of lijst heeft onjuiste lengte" #: shared-bindings/_pixelbuf/PixelBuf.c msgid "tuple/list required on RHS" msgstr "tuple of lijst vereist op RHS" #: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c msgid "tx and rx cannot both be None" msgstr "tx en rx kunnen niet beiden None zijn" #: py/objtype.c msgid "type '%q' is not an acceptable base type" msgstr "type '%q' is geen aanvaardbaar basistype" #: py/objtype.c msgid "type is not an acceptable base type" msgstr "type is geen aanvaardbaar basistype" #: py/runtime.c msgid "type object '%q' has no attribute '%q'" msgstr "objecttype '%q' heeft geen attribuut '%q'" #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "type accepteert 1 of 3 argumenten" #: py/objint_longlong.c msgid "ulonglong too large" msgstr "ulonglong te groot" #: py/emitnative.c msgid "unary op %q not implemented" msgstr "unair op %q niet geïmplementeerd" #: py/parse.c msgid "unexpected indent" msgstr "onverwachte inspringing" #: py/bc.c msgid "unexpected keyword argument" msgstr "onverwacht trefwoordargument" #: py/bc.c py/objnamedtuple.c msgid "unexpected keyword argument '%q'" msgstr "onverwacht trefwoordargument '%q'" #: py/lexer.c msgid "unicode name escapes" msgstr "op naam gebaseerde unicode escapes zijn niet geïmplementeerd" #: py/parse.c msgid "unindent does not match any outer indentation level" msgstr "inspringing komt niet overeen met hoger gelegen inspringingsniveaus" #: py/objstr.c #, c-format msgid "unknown conversion specifier %c" msgstr "onbekende conversiespecificatie %c" #: py/objstr.c msgid "unknown format code '%c' for object of type '%q'" msgstr "" #: py/compile.c msgid "unknown type" msgstr "onbekend type" #: py/emitnative.c msgid "unknown type '%q'" msgstr "onbekend type '%q'" #: py/objstr.c msgid "unmatched '{' in format" msgstr "'{' zonder overeenkomst in formaat" #: py/objtype.c py/runtime.c msgid "unreadable attribute" msgstr "onleesbaar attribuut" #: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c #: shared-module/vectorio/Polygon.c msgid "unsupported %q type" msgstr "niet ondersteund %q type" #: py/emitinlinethumb.c #, c-format msgid "unsupported Thumb instruction '%s' with %d arguments" msgstr "niet ondersteunde Thumb instructie '%s' met %d argumenten" #: py/emitinlinextensa.c #, c-format msgid "unsupported Xtensa instruction '%s' with %d arguments" msgstr "niet ondersteunde Xtensa instructie '%s' met %d argumenten" #: py/objstr.c #, c-format msgid "unsupported format character '%c' (0x%x) at index %d" msgstr "niet ondersteund formaatkarakter '%c' (0x%x) op index %d" #: py/runtime.c msgid "unsupported type for %q: '%q'" msgstr "" #: py/runtime.c msgid "unsupported type for operator" msgstr "niet ondersteund type voor operator" #: py/runtime.c msgid "unsupported types for %q: '%q', '%q'" msgstr "" #: py/objint.c #, c-format msgid "value must fit in %d byte(s)" msgstr "waarde moet in %d byte(s) passen" #: shared-bindings/displayio/Bitmap.c msgid "value_count must be > 0" msgstr "value_count moet groter dan 0 zijn" #: extmod/ulab/code/linalg/linalg.c msgid "vectors must have same lengths" msgstr "vectoren moeten van gelijke lengte zijn" #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "watchdog time-out moet groter zijn dan 0" #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "window moet <= interval zijn" #: extmod/ulab/code/linalg/linalg.c msgid "wrong argument type" msgstr "onjuist argumenttype" #: extmod/ulab/code/ndarray.c msgid "wrong index type" msgstr "onjuist indextype" #: extmod/ulab/code/vector/vectorise.c msgid "wrong input type" msgstr "onjuist invoertype" #: extmod/ulab/code/ulab_create.c py/objstr.c msgid "wrong number of arguments" msgstr "onjuist aantal argumenten" #: py/runtime.c msgid "wrong number of values to unpack" msgstr "verkeerd aantal waarden om uit te pakken" #: extmod/ulab/code/ndarray.c msgid "wrong operand type" msgstr "verkeerd operandtype" #: extmod/ulab/code/vector/vectorise.c msgid "wrong output type" msgstr "onjuist uitvoer type" #: shared-module/displayio/Shape.c msgid "x value out of bounds" msgstr "x-waarde buiten bereik" #: shared-bindings/displayio/Shape.c msgid "y should be an int" msgstr "y moet een int zijn" #: shared-module/displayio/Shape.c msgid "y value out of bounds" msgstr "y-waarde buiten bereik" #: py/objrange.c msgid "zero step" msgstr "nul-stap" #: extmod/ulab/code/filter/filter.c msgid "zi must be an ndarray" msgstr "zi moet een ndarray zijn" #: extmod/ulab/code/filter/filter.c msgid "zi must be of float type" msgstr "zi moet van type float zijn" #: extmod/ulab/code/filter/filter.c msgid "zi must be of shape (n_section, 2)" msgstr "zi moet vorm (n_section, 2) hebben" #~ msgid "%q indices must be integers, not %s" #~ msgstr "%q indexen moeten integers zijn, niet %s" #~ msgid "'%s' object cannot assign attribute '%q'" #~ msgstr "'%s' object kan niet aan attribuut '%q' toewijzen" #~ msgid "'%s' object does not support '%q'" #~ msgstr "'%s' object ondersteunt '%q' niet" #~ msgid "'%s' object does not support item assignment" #~ msgstr "'%s' object ondersteunt item toewijzing niet" #~ msgid "'%s' object does not support item deletion" #~ msgstr "'%s' object ondersteunt item verwijdering niet" #~ msgid "'%s' object has no attribute '%q'" #~ msgstr "'%s' object heeft geen attribuut '%q'" #~ msgid "'%s' object is not an iterator" #~ msgstr "'%s' object is geen iterator" #~ msgid "'%s' object is not callable" #~ msgstr "'%s' object is niet aanroepbaar" #~ msgid "'%s' object is not iterable" #~ msgstr "'%s' object is niet itereerbaar" #~ msgid "'%s' object is not subscriptable" #~ msgstr "'%s' object is niet onderschrijfbaar" #~ msgid "Pop from an empty Ps2 buffer" #~ msgstr "Pop van een lege Ps2 buffer" #~ msgid "Running in safe mode! Auto-reload is off.\n" #~ msgstr "Draaiende in veilige modus! Auto-herlaad is uit.\n" #~ msgid "Running in safe mode! Not running saved code.\n" #~ msgstr "" #~ "Draaiende in veilige modus! Opgeslagen code wordt niet uitgevoerd.\n" #~ msgid "__init__() should return None, not '%s'" #~ msgstr "__init __ () zou None moeten retouneren, niet '%s'" #~ msgid "can't convert %s to complex" #~ msgstr "kan %s niet converteren naar een complex" #~ msgid "can't convert %s to float" #~ msgstr "kan %s niet omzetten naar een float" #~ msgid "can't convert %s to int" #~ msgstr "kan %s niet omzetten naar een int" #~ msgid "can't convert NaN to int" #~ msgstr "kan NaN niet omzetten naar int" #~ msgid "can't convert address to int" #~ msgstr "kan adres niet omzetten naar int" #~ msgid "can't convert inf to int" #~ msgstr "kan inf niet omzetten naar int" #~ msgid "can't convert to complex" #~ msgstr "kan niet omzetten naar complex" #~ msgid "can't convert to float" #~ msgstr "kan niet omzetten naar float" #~ msgid "can't convert to int" #~ msgstr "kan niet omzetten naar int" #~ msgid "object '%s' is not a tuple or list" #~ msgstr "object '%s' is geen tuple of lijst" #~ msgid "object of type '%s' has no len()" #~ msgstr "object van type '%s' heeft geen len()" #~ msgid "pop from an empty PulseIn" #~ msgstr "pop van een lege PulseIn" #~ msgid "pop from an empty set" #~ msgstr "pop van een lege set" #~ msgid "pop from empty list" #~ msgstr "pop van een lege lijst" #~ msgid "popitem(): dictionary is empty" #~ msgstr "popitem(): dictionary is leeg" #~ msgid "string index out of range" #~ msgstr "string index buiten bereik" #~ msgid "string indices must be integers, not %s" #~ msgstr "string indices moeten integer zijn, niet %s" #~ msgid "struct: index out of range" #~ msgstr "struct: index buiten bereik" #~ msgid "unknown format code '%c' for object of type '%s'" #~ msgstr "onbekende formaatcode '%c' voor object van type '%s'" #~ msgid "unsupported type for %q: '%s'" #~ msgstr "niet ondersteund type voor %q: '%s'" #~ msgid "unsupported types for %q: '%s', '%s'" #~ msgstr "niet ondersteunde types voor %q: '%s', '%s'" #~ msgid "'async for' or 'async with' outside async function" #~ msgstr "'async for' of 'async with' buiten async functie" #~ msgid "PulseIn not supported on this chip" #~ msgstr "PusleIn niet ondersteund door deze chip" #~ msgid "PulseOut not supported on this chip" #~ msgstr "PulseOut niet ondersteund door deze chip" #~ msgid "I2C operation not supported" #~ msgstr "I2C actie niet ondersteund" #~ msgid "Negative step not supported" #~ msgstr "Negatieve stappen niet ondersteund" #~ msgid "bits must be 8" #~ msgstr "bits moet 8 zijn" #~ msgid "buffers must be the same length" #~ msgstr "buffers moeten dezelfde lengte hebben" #~ msgid "firstbit must be MSB" #~ msgstr "het eerste bit moet het MSB zijn" #~ msgid "invalid I2C peripheral" #~ msgstr "onjuist I2C randapparaat" #~ msgid "invalid SPI peripheral" #~ msgstr "onjuist SPI randapparaat" #~ msgid "must specify all of sck/mosi/miso" #~ msgstr "sck/mosi/miso moeten alle gespecificeerd worden"