/* * This file is part of the MicroPython project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include #include "supervisor/shared/bluetooth/bluetooth.h" #include "shared-bindings/_bleio/__init__.h" #include "shared-bindings/_bleio/Adapter.h" #if defined(CIRCUITPY_BOOT_BUTTON) #include "shared-bindings/digitalio/DigitalInOut.h" #endif #include "shared-bindings/microcontroller/Processor.h" #include "shared-bindings/microcontroller/ResetReason.h" #include "shared-module/storage/__init__.h" #include "common-hal/_bleio/__init__.h" #include "supervisor/shared/status_leds.h" #include "supervisor/shared/tick.h" #include "py/mpstate.h" #if CIRCUITPY_BLE_FILE_SERVICE #include "supervisor/shared/bluetooth/file_transfer.h" #include "bluetooth/ble_drv.h" #endif #if CIRCUITPY_SERIAL_BLE #include "supervisor/shared/bluetooth/serial.h" #include "bluetooth/ble_drv.h" #endif // This standard advertisement advertises the CircuitPython editing service and a CIRCUITPY short name. const uint8_t public_advertising_data[] = { 0x02, 0x01, 0x06, // 0-2 Flags 0x02, 0x0a, 0xd8, // 3-5 TX power level -40 #if CIRCUITPY_BLE_FILE_SERVICE 0x03, 0x02, 0xbb, 0xfe, // 6 - 9 Incomplete service list (File Transfer service) #endif 0x0e, 0xff, 0x22, 0x08, // 10 - 13 Adafruit Manufacturer Data 0x0a, 0x04, 0x00, // 14 - 16 Creator ID / Creation ID CIRCUITPY_CREATOR_ID & 0xff, // 17 - 20 Creator ID (CIRCUITPY_CREATOR_ID >> 8) & 0xff, (CIRCUITPY_CREATOR_ID >> 16) & 0xff, (CIRCUITPY_CREATOR_ID >> 24) & 0xff, CIRCUITPY_CREATION_ID & 0xff, // 21 - 24 Creation ID (CIRCUITPY_CREATION_ID >> 8) & 0xff, (CIRCUITPY_CREATION_ID >> 16) & 0xff, (CIRCUITPY_CREATION_ID >> 24) & 0xff, 0x05, 0x08, 0x43, 0x49, 0x52, 0x43 // 25 - 31 - Short name }; const uint8_t private_advertising_data[] = { 0x02, 0x01, 0x06, // 0-2 Flags 0x02, 0x0a, 0x00 // 3-5 TX power level 0 }; // This scan response advertises the full CIRCPYXXXX device name. uint8_t circuitpython_scan_response_data[] = { 0x0a, 0x09, 0x43, 0x49, 0x52, 0x50, 0x59, 0x00, 0x00, 0x00, 0x00, #if CIRCUITPY_SERIAL_BLE 0x11, 0x06, 0x9e, 0xca, 0xdc, 0x24, 0x0e, 0xe5, 0xa9, 0xe0, 0x93, 0xf3, 0xa3, 0xb5, 0x01, 0x00, 0x40, 0x6e, #endif }; bool boot_in_discovery_mode = false; bool advertising = false; STATIC void supervisor_bluetooth_start_advertising(void) { #if !CIRCUITPY_BLE_FILE_SERVICE && !CIRCUITPY_SERIAL_BLE return; #else bool is_connected = common_hal_bleio_adapter_get_connected(&common_hal_bleio_adapter_obj); if (is_connected) { return; } bool bonded = common_hal_bleio_adapter_is_bonded_to_central(&common_hal_bleio_adapter_obj); #if CIRCUITPY_USB // Don't advertise when we have USB instead of BLE. if (!bonded && !boot_in_discovery_mode) { return; } #endif uint32_t timeout = 0; float interval = 0.1f; int tx_power = 0; const uint8_t *adv = private_advertising_data; size_t adv_len = sizeof(private_advertising_data); const uint8_t *scan_response = NULL; size_t scan_response_len = 0; // Advertise with less power when doing so publicly to reduce who can hear us. This will make it // harder for someone with bad intentions to pair from a distance. if (!bonded) { tx_power = -40; adv = public_advertising_data; adv_len = sizeof(public_advertising_data); scan_response = circuitpython_scan_response_data; scan_response_len = sizeof(circuitpython_scan_response_data); } uint32_t status = _common_hal_bleio_adapter_start_advertising(&common_hal_bleio_adapter_obj, true, bonded, // Advertise anonymously if we are bonded timeout, interval, adv, adv_len, scan_response, scan_response_len, tx_power, NULL); // This may fail if we are already advertising. advertising = status == NRF_SUCCESS; #endif } #define BLE_DISCOVERY_DATA_GUARD 0xbb0000bb #define BLE_DISCOVERY_DATA_GUARD_MASK 0xff0000ff void supervisor_bluetooth_init(void) { uint32_t reset_state = port_get_saved_word(); uint32_t ble_mode = 0; if ((reset_state & BLE_DISCOVERY_DATA_GUARD_MASK) == BLE_DISCOVERY_DATA_GUARD) { ble_mode = (reset_state & ~BLE_DISCOVERY_DATA_GUARD_MASK) >> 8; } const mcu_reset_reason_t reset_reason = common_hal_mcu_processor_get_reset_reason(); boot_in_discovery_mode = false; if (reset_reason != RESET_REASON_POWER_ON && reset_reason != RESET_REASON_RESET_PIN && reset_reason != RESET_REASON_UNKNOWN && reset_reason != RESET_REASON_SOFTWARE) { return; } if (ble_mode == 0) { port_set_saved_word(BLE_DISCOVERY_DATA_GUARD | (0x01 << 8)); } // Wait for a while to allow for reset. #ifdef CIRCUITPY_BOOT_BUTTON digitalio_digitalinout_obj_t boot_button; common_hal_digitalio_digitalinout_construct(&boot_button, CIRCUITPY_BOOT_BUTTON); common_hal_digitalio_digitalinout_switch_to_input(&boot_button, PULL_UP); #endif uint64_t start_ticks = supervisor_ticks_ms64(); uint64_t diff = 0; if (ble_mode != 0) { #ifdef CIRCUITPY_STATUS_LED new_status_color(0x0000ff); #endif common_hal_bleio_adapter_erase_bonding(&common_hal_bleio_adapter_obj); boot_in_discovery_mode = true; reset_state = 0x0; } while (diff < 1000) { #ifdef CIRCUITPY_STATUS_LED // Blink on for 100, off for 100, on for 100, off for 100 and on for 200 bool led_on = ble_mode != 0 || (diff % 150) <= 75; if (led_on) { new_status_color(0x0000ff); } else { new_status_color(BLACK); } #endif #ifdef CIRCUITPY_BOOT_BUTTON if (!common_hal_digitalio_digitalinout_get_value(&boot_button)) { boot_in_discovery_mode = true; break; } #endif diff = supervisor_ticks_ms64() - start_ticks; } #if CIRCUITPY_STATUS_LED new_status_color(BLACK); status_led_deinit(); #endif port_set_saved_word(reset_state); } STATIC bool was_connected; void supervisor_bluetooth_background(void) { bool is_connected = common_hal_bleio_adapter_get_connected(&common_hal_bleio_adapter_obj); if (was_connected && !is_connected) { #if CIRCUITPY_BLE_FILE_SERVICE supervisor_bluetooth_file_transfer_disconnected(); #endif } was_connected = is_connected; if (!is_connected) { supervisor_bluetooth_start_advertising(); return; } #if CIRCUITPY_BLE_FILE_SERVICE supervisor_bluetooth_file_transfer_background(); #endif } void supervisor_start_bluetooth(void) { #if !CIRCUITPY_BLE_FILE_SERVICE && !CIRCUITPY_SERIAL_BLE return; #endif common_hal_bleio_adapter_set_enabled(&common_hal_bleio_adapter_obj, true); #if CIRCUITPY_BLE_FILE_SERVICE supervisor_start_bluetooth_file_transfer(); #endif #if CIRCUITPY_SERIAL_BLE supervisor_start_bluetooth_serial(); #endif // Kick off advertisments supervisor_bluetooth_background(); }