# Spanish translation.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the PACKAGE package.
# Carlos Diaz <carlos.santiago.diaz@gmail.com>, 2018.
# Juan Biondi <juanernestobiondi@gmail.com>, 2018.
#
msgid ""
msgstr ""
"Project-Id-Version: \n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2019-04-13 11:50+0200\n"
"PO-Revision-Date: 2018-08-24 22:56-0500\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: en_US\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.1.1\n"

#: main.c
msgid ""
"\n"
"Code done running. Waiting for reload.\n"
msgstr ""
"\n"
"Código en ejecución. Esperando para recargar.\n"

#: py/obj.c
msgid "  File \"%q\""
msgstr "  Archivo \"%q\""

#: py/obj.c
msgid "  File \"%q\", line %d"
msgstr "  Archivo \"%q\", línea %d"

#: main.c
msgid " output:\n"
msgstr " salida:\n"

#: py/objstr.c
#, c-format
msgid "%%c requires int or char"
msgstr "%%c requiere int o char"

#: shared-bindings/microcontroller/Pin.c
msgid "%q in use"
msgstr "%q está siendo utilizado"

#: py/obj.c
msgid "%q index out of range"
msgstr "%q indice fuera de rango"

#: py/obj.c
msgid "%q indices must be integers, not %s"
msgstr "%q indices deben ser enteros, no %s"

#: shared-bindings/displayio/Group.c shared-bindings/displayio/Shape.c
#: shared-bindings/bleio/CharacteristicBuffer.c
#, fuzzy
msgid "%q must be >= 1"
msgstr "%q debe ser >= 1"

#: shared-bindings/fontio/BuiltinFont.c
#, fuzzy
msgid "%q should be an int"
msgstr "%q deberia ser un int"

#: py/objnamedtuple.c py/bc.c
msgid "%q() takes %d positional arguments but %d were given"
msgstr "%q() toma %d argumentos posicionales pero %d fueron dados"

#: py/argcheck.c
msgid "'%q' argument required"
msgstr "argumento '%q' requerido"

#: py/emitinlinextensa.c py/emitinlinethumb.c
#, c-format
msgid "'%s' expects a label"
msgstr "'%s' espera una etiqueta"

#: py/emitinlinextensa.c py/emitinlinethumb.c
#, c-format
msgid "'%s' expects a register"
msgstr "'%s' espera un registro"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects a special register"
msgstr "'%s' espera un carácter"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an FPU register"
msgstr "'%s' espera un registro de FPU"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an address of the form [a, b]"
msgstr "'%s' espera una dirección de forma [a, b]"

#: py/emitinlinextensa.c py/emitinlinethumb.c
#, c-format
msgid "'%s' expects an integer"
msgstr "'%s' espera un entero"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects at most r%d"
msgstr "'%s' espera a lo sumo r%d"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' expects {r0, r1, ...}"
msgstr "'%s' espera {r0, r1, ...}"

#: py/emitinlinextensa.c
#, c-format
msgid "'%s' integer %d is not within range %d..%d"
msgstr "'%s' entero %d no esta dentro del rango %d..%d"

#: py/emitinlinethumb.c
#, c-format
msgid "'%s' integer 0x%x does not fit in mask 0x%x"
msgstr "'%s' entero 0x%x no cabe en la máscara 0x%x"

#: py/obj.c
#, c-format
msgid "'%s' object does not support item assignment"
msgstr "el objeto '%s' no soporta la asignación de elementos"

#: py/obj.c
#, c-format
msgid "'%s' object does not support item deletion"
msgstr "objeto '%s' no soporta la eliminación de elementos"

#: py/runtime.c
msgid "'%s' object has no attribute '%q'"
msgstr "objeto '%s' no tiene atributo '%q'"

#: py/runtime.c
#, c-format
msgid "'%s' object is not an iterator"
msgstr "objeto '%s' no es un iterator"

#: py/objtype.c py/runtime.c
#, c-format
msgid "'%s' object is not callable"
msgstr "objeto '%s' no puede ser llamado"

#: py/runtime.c
#, c-format
msgid "'%s' object is not iterable"
msgstr "objeto '%s' no es iterable"

#: py/obj.c
#, c-format
msgid "'%s' object is not subscriptable"
msgstr "el objeto '%s' no es suscriptable"

#: py/objstr.c
msgid "'=' alignment not allowed in string format specifier"
msgstr "'=' alineación no permitida en el especificador string format"

#: shared-module/struct/__init__.c
msgid "'S' and 'O' are not supported format types"
msgstr "'S' y 'O' no son compatibles con los tipos de formato"

#: py/compile.c
msgid "'align' requires 1 argument"
msgstr "'align' requiere 1 argumento"

#: py/compile.c
msgid "'await' outside function"
msgstr "'await' fuera de la función"

#: py/compile.c
msgid "'break' outside loop"
msgstr "'break' fuera de un bucle"

#: py/compile.c
msgid "'continue' outside loop"
msgstr "'continue' fuera de un bucle"

#: py/compile.c
msgid "'data' requires at least 2 arguments"
msgstr "'data' requiere como minomo 2 argumentos"

#: py/compile.c
msgid "'data' requires integer arguments"
msgstr "'data' requiere argumentos de tipo entero"

#: py/compile.c
msgid "'label' requires 1 argument"
msgstr "'label' requiere 1 argumento"

#: py/compile.c
msgid "'return' outside function"
msgstr "'return' fuera de una función"

#: py/compile.c
msgid "'yield' outside function"
msgstr ""
"No es posible reiniciar en modo bootloader porque no hay bootloader presente."

#: py/compile.c
msgid "*x must be assignment target"
msgstr "*x debe ser objetivo de la tarea"

#: py/obj.c
msgid ", in %q\n"
msgstr ", en %q\n"

#: py/objcomplex.c
msgid "0.0 to a complex power"
msgstr "0.0 a una potencia compleja"

#: py/modbuiltins.c
msgid "3-arg pow() not supported"
msgstr "pow() con 3 argumentos no soportado"

#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "A hardware interrupt channel is already in use"
msgstr "El canal EXTINT ya está siendo utilizado"

#: shared-bindings/bleio/Address.c
#, c-format
msgid "Address is not %d bytes long or is in wrong format"
msgstr ""

#: shared-bindings/bleio/Address.c
#, fuzzy, c-format
msgid "Address must be %d bytes long"
msgstr "palette debe ser 32 bytes de largo"

#: ports/nrf/common-hal/busio/I2C.c
msgid "All I2C peripherals are in use"
msgstr "Todos los timers están siendo usados"

#: ports/nrf/common-hal/busio/SPI.c
msgid "All SPI peripherals are in use"
msgstr "Todos los timers están siendo usados"

#: ports/nrf/common-hal/busio/UART.c
#, fuzzy
msgid "All UART peripherals are in use"
msgstr "Todos los timers están siendo usados"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "All event channels in use"
msgstr "Todos los canales de eventos en uso"

#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c ports/atmel-samd/audio_dma.c
msgid "All sync event channels in use"
msgstr ""
"Todos los canales de eventos de sincronización(sync event channels) están "
"siendo utilizados"

#: shared-bindings/pulseio/PWMOut.c
msgid "All timers for this pin are in use"
msgstr "Todos los timers para este pin están siendo utilizados"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/nrf/common-hal/pulseio/PulseOut.c shared-bindings/pulseio/PWMOut.c
#: shared-module/_pew/PewPew.c
msgid "All timers in use"
msgstr "Todos los timers en uso"

#: ports/nrf/common-hal/analogio/AnalogOut.c
msgid "AnalogOut functionality not supported"
msgstr "Funcionalidad AnalogOut no soportada"

#: shared-bindings/analogio/AnalogOut.c
msgid "AnalogOut is only 16 bits. Value must be less than 65536."
msgstr "AnalogOut es solo de 16 bits. Value debe ser menos a 65536."

#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
msgid "AnalogOut not supported on given pin"
msgstr "El pin proporcionado no soporta AnalogOut"

#: ports/atmel-samd/common-hal/pulseio/PulseOut.c
msgid "Another send is already active"
msgstr "Otro envío ya está activo"

#: shared-bindings/pulseio/PulseOut.c
msgid "Array must contain halfwords (type 'H')"
msgstr ""

#: shared-bindings/nvm/ByteArray.c
msgid "Array values should be single bytes."
msgstr "Valores del array deben ser bytes individuales."

#: supervisor/shared/safe_mode.c
msgid "Attempted heap allocation when MicroPython VM not running.\n"
msgstr ""

#: main.c
msgid "Auto-reload is off.\n"
msgstr "Auto-recarga deshabilitada.\n"

#: main.c
msgid ""
"Auto-reload is on. Simply save files over USB to run them or enter REPL to "
"disable.\n"
msgstr ""
"Auto-reload habilitado. Simplemente guarda los archivos via USB para "
"ejecutarlos o entra al REPL para desabilitarlos.\n"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Bit clock and word select must share a clock unit"
msgstr "Bit clock y word select deben compartir una unidad de reloj"

#: shared-bindings/audiobusio/PDMIn.c
msgid "Bit depth must be multiple of 8."
msgstr "La profundidad de bits debe ser múltiplo de 8."

#: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c
msgid "Both pins must support hardware interrupts"
msgstr "Ambos pines deben soportar interrupciones por hardware"

#: shared-bindings/supervisor/__init__.c
msgid "Brightness must be between 0 and 255"
msgstr "Brightness debe estar entro 0 y 255"

#: shared-bindings/displayio/Display.c
msgid "Brightness not adjustable"
msgstr ""

#: shared-module/usb_hid/Device.c
#, c-format
msgid "Buffer incorrect size. Should be %d bytes."
msgstr "Tamaño de buffer incorrecto. Debe ser de %d bytes."

#: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c
msgid "Buffer must be at least length 1"
msgstr "Buffer debe ser de longitud 1 como minimo"

#: ports/atmel-samd/common-hal/displayio/ParallelBus.c
#: ports/nrf/common-hal/displayio/ParallelBus.c
#, fuzzy, c-format
msgid "Bus pin %d is already in use"
msgstr "DAC ya está siendo utilizado"

#: shared-bindings/bleio/UUID.c
#, fuzzy
msgid "Byte buffer must be 16 bytes."
msgstr "buffer debe de ser un objeto bytes-like"

#: shared-bindings/nvm/ByteArray.c
msgid "Bytes must be between 0 and 255."
msgstr "Bytes debe estar entre 0 y 255."

#: shared-bindings/_pixelbuf/PixelBuf.c
#, c-format
msgid "Can not use dotstar with %s"
msgstr ""

#: shared-bindings/bleio/Device.c
msgid "Can't add services in Central mode"
msgstr "No se pueden agregar servicio en modo Central"

#: shared-bindings/bleio/Device.c
msgid "Can't advertise in Central mode"
msgstr ""

#: shared-bindings/bleio/Device.c
msgid "Can't change the name in Central mode"
msgstr "No se puede cambiar el nombre en modo Central"

#: shared-bindings/bleio/Device.c
msgid "Can't connect in Peripheral mode"
msgstr "No se puede conectar en modo Peripheral"

#: shared-bindings/displayio/Bitmap.c shared-bindings/pulseio/PulseIn.c
msgid "Cannot delete values"
msgstr "No se puede eliminar valores"

#: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c
#: ports/nrf/common-hal/digitalio/DigitalInOut.c
msgid "Cannot get pull while in output mode"
msgstr "No puede ser pull mientras este en modo de salida"

#: ports/nrf/common-hal/microcontroller/Processor.c
#, fuzzy
msgid "Cannot get temperature"
msgstr "No se puede obtener la temperatura. status: 0x%02x"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Cannot output both channels on the same pin"
msgstr "No se puede tener ambos canales en el mismo pin"

#: shared-module/bitbangio/SPI.c
msgid "Cannot read without MISO pin."
msgstr "No se puede leer sin pin MISO."

#: shared-bindings/audiobusio/PDMIn.c
msgid "Cannot record to a file"
msgstr "No se puede grabar en un archivo"

#: shared-module/storage/__init__.c
msgid "Cannot remount '/' when USB is active."
msgstr "No se puede volver a montar '/' cuando el USB esta activo."

#: ports/atmel-samd/common-hal/microcontroller/__init__.c
msgid "Cannot reset into bootloader because no bootloader is present."
msgstr "No se puede reiniciar a bootloader porque no hay bootloader presente."

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Cannot set value when direction is input."
msgstr "No se puede asignar un valor cuando la dirección es input."

#: py/objslice.c
msgid "Cannot subclass slice"
msgstr ""

#: shared-module/bitbangio/SPI.c
msgid "Cannot transfer without MOSI and MISO pins."
msgstr "No se puede transferir sin pines MOSI y MISO."

#: extmod/moductypes.c
msgid "Cannot unambiguously get sizeof scalar"
msgstr "No se puede obtener inequívocamente sizeof escalar"

#: shared-module/bitbangio/SPI.c
msgid "Cannot write without MOSI pin."
msgstr "No se puede escribir sin pin MOSI."

#: shared-bindings/bleio/Service.c
msgid "Characteristic UUID doesn't match Service UUID"
msgstr ""

#: ports/nrf/common-hal/bleio/Service.c
msgid "Characteristic already in use by another Service."
msgstr ""

#: shared-bindings/bleio/CharacteristicBuffer.c
msgid "CharacteristicBuffer writing not provided"
msgstr ""

#: shared-module/bitbangio/SPI.c
msgid "Clock pin init failed."
msgstr "Clock pin init fallido"

#: shared-module/bitbangio/I2C.c
msgid "Clock stretch too long"
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Clock unit in use"
msgstr "Clock unit está siendo utilizado"

#: shared-bindings/_pew/PewPew.c
msgid "Column entry must be digitalio.DigitalInOut"
msgstr ""

#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/ParallelBus.c
#, fuzzy
msgid "Command must be an int between 0 and 255"
msgstr "Bytes debe estar entre 0 y 255."

#: ports/nrf/common-hal/bleio/UUID.c
#, c-format
msgid "Could not decode ble_uuid, err 0x%04x"
msgstr ""

#: ports/atmel-samd/common-hal/busio/UART.c
msgid "Could not initialize UART"
msgstr "No se puede inicializar la UART"

#: shared-module/audioio/Mixer.c shared-module/audioio/WaveFile.c
msgid "Couldn't allocate first buffer"
msgstr "No se pudo asignar el primer buffer"

#: shared-module/audioio/Mixer.c shared-module/audioio/WaveFile.c
msgid "Couldn't allocate second buffer"
msgstr "No se pudo asignar el segundo buffer"

#: supervisor/shared/safe_mode.c
msgid "Crash into the HardFault_Handler.\n"
msgstr ""

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "DAC already in use"
msgstr "DAC ya está siendo utilizado"

#: ports/atmel-samd/common-hal/displayio/ParallelBus.c
#: ports/nrf/common-hal/displayio/ParallelBus.c
#, fuzzy
msgid "Data 0 pin must be byte aligned"
msgstr "graphic debe ser 2048 bytes de largo"

#: shared-module/audioio/WaveFile.c
msgid "Data chunk must follow fmt chunk"
msgstr ""

#: ports/nrf/common-hal/bleio/Broadcaster.c
#: ports/nrf/common-hal/bleio/Peripheral.c
#, fuzzy
msgid "Data too large for advertisement packet"
msgstr "Los datos no caben en el paquete de anuncio."

#: ports/nrf/common-hal/bleio/Device.c
#, fuzzy
msgid "Data too large for the advertisement packet"
msgstr "Los datos no caben en el paquete de anuncio."

#: shared-bindings/audiobusio/PDMIn.c
msgid "Destination capacity is smaller than destination_length."
msgstr "Capacidad de destino es mas pequeña que destination_length."

#: shared-bindings/displayio/Display.c
msgid "Display rotation must be in 90 degree increments"
msgstr "Rotación de display debe ser en incrementos de 90 grados"

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Drive mode not used when direction is input."
msgstr "Modo Drive no se usa cuando la dirección es input."

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "EXTINT channel already in use"
msgstr "El canal EXTINT ya está siendo utilizado"

#: extmod/modure.c
msgid "Error in regex"
msgstr "Error en regex"

#: shared-bindings/pulseio/PulseOut.c shared-bindings/neopixel_write/__init__.c
#: shared-bindings/terminalio/Terminal.c shared-bindings/microcontroller/Pin.c
msgid "Expected a %q"
msgstr "Se espera un %q"

#: shared-bindings/bleio/CharacteristicBuffer.c
#, fuzzy
msgid "Expected a Characteristic"
msgstr "No se puede agregar la Característica."

#: shared-bindings/bleio/Descriptor.c shared-bindings/bleio/Service.c
#: shared-bindings/bleio/Characteristic.c
#, fuzzy
msgid "Expected a UUID"
msgstr "Se espera un %q"

#: shared-module/_pixelbuf/PixelBuf.c
#, c-format
msgid "Expected tuple of length %d, got %d"
msgstr "Se esperaba un tuple de %d, se obtuvo %d"

#: ports/nrf/common-hal/bleio/Device.c
#, fuzzy
msgid "Failed to acquire mutex"
msgstr "No se puede adquirir el mutex, status: 0x%08lX"

#: ports/nrf/common-hal/bleio/Characteristic.c ports/nrf/sd_mutex.c
#, fuzzy, c-format
msgid "Failed to acquire mutex, err 0x%04x"
msgstr "No se puede adquirir el mutex, status: 0x%08lX"

#: ports/nrf/common-hal/bleio/Service.c
#, fuzzy, c-format
msgid "Failed to add characteristic, err 0x%04x"
msgstr "No se puede añadir caracteristica, status: 0x%08lX"

#: ports/nrf/common-hal/bleio/Device.c
#, fuzzy
msgid "Failed to add service"
msgstr "No se puede detener el anuncio. status: 0x%02x"

#: ports/nrf/common-hal/bleio/Peripheral.c
#, fuzzy, c-format
msgid "Failed to add service, err 0x%04x"
msgstr "No se puede detener el anuncio. status: 0x%02x"

#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
msgid "Failed to allocate RX buffer"
msgstr "Ha fallado la asignación del buffer RX"

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
#, c-format
msgid "Failed to allocate RX buffer of %d bytes"
msgstr "Falló la asignación del buffer RX de %d bytes"

#: ports/nrf/common-hal/bleio/Adapter.c
#, fuzzy
msgid "Failed to change softdevice state"
msgstr "No se puede cambiar el estado del softdevice, error: 0x%08lX"

#: ports/nrf/common-hal/bleio/Device.c
#, fuzzy
msgid "Failed to connect:"
msgstr "No se puede conectar. status: 0x%02x"

#: ports/nrf/common-hal/bleio/Device.c
#, fuzzy
msgid "Failed to continue scanning"
msgstr "No se puede iniciar el escaneo. status: 0x%02x"

#: ports/nrf/common-hal/bleio/Scanner.c
#, fuzzy, c-format
msgid "Failed to continue scanning, err 0x%04x"
msgstr "No se puede iniciar el escaneo. status: 0x%02x"

#: ports/nrf/common-hal/bleio/Device.c
#, fuzzy
msgid "Failed to create mutex"
msgstr "No se puede leer el valor del atributo. status 0x%02x"

#: ports/nrf/common-hal/bleio/Device.c
#, fuzzy
msgid "Failed to discover services"
msgstr "No se puede descubrir servicios, status: 0x%08lX"

#: ports/nrf/common-hal/bleio/Adapter.c
#, fuzzy
msgid "Failed to get local address"
msgstr "No se puede obtener la dirección local, error: 0x%08lX"

#: ports/nrf/common-hal/bleio/Adapter.c
#, fuzzy
msgid "Failed to get softdevice state"
msgstr "No se puede obtener el estado del softdevice, error: 0x%08lX"

#: ports/nrf/common-hal/bleio/Characteristic.c
#, c-format
msgid "Failed to notify or indicate attribute value, err 0x%04x"
msgstr "Error al notificar o indicar el valor del atributo, err 0x%04x"

#: ports/nrf/common-hal/bleio/Characteristic.c
#, fuzzy, c-format
msgid "Failed to read CCCD value, err 0x%04x"
msgstr "No se puede leer el valor del atributo. status 0x%02x"

#: ports/nrf/common-hal/bleio/Characteristic.c
#, c-format
msgid "Failed to read attribute value, err 0x%04x"
msgstr "Error al leer valor del atributo, err 0x%04"

#: ports/nrf/common-hal/bleio/Characteristic.c
#, fuzzy, c-format
msgid "Failed to read gatts value, err 0x%04x"
msgstr "No se puede escribir el valor del atributo. status: 0x%02x"

#: ports/nrf/common-hal/bleio/UUID.c
#, fuzzy, c-format
msgid "Failed to register Vendor-Specific UUID, err 0x%04x"
msgstr "No se puede agregar el Vendor Specific 128-bit UUID."

#: ports/nrf/common-hal/bleio/Device.c
#, fuzzy
msgid "Failed to release mutex"
msgstr "No se puede liberar el mutex, status: 0x%08lX"

#: ports/nrf/common-hal/bleio/Characteristic.c ports/nrf/sd_mutex.c
#, fuzzy, c-format
msgid "Failed to release mutex, err 0x%04x"
msgstr "No se puede liberar el mutex, status: 0x%08lX"

#: ports/nrf/common-hal/bleio/Device.c
#, fuzzy
msgid "Failed to start advertising"
msgstr "No se puede inicar el anuncio. status: 0x%02x"

#: ports/nrf/common-hal/bleio/Broadcaster.c
#: ports/nrf/common-hal/bleio/Peripheral.c
#, fuzzy, c-format
msgid "Failed to start advertising, err 0x%04x"
msgstr "No se puede inicar el anuncio. status: 0x%02x"

#: ports/nrf/common-hal/bleio/Device.c
#, fuzzy
msgid "Failed to start scanning"
msgstr "No se puede iniciar el escaneo. status: 0x%02x"

#: ports/nrf/common-hal/bleio/Scanner.c
#, fuzzy, c-format
msgid "Failed to start scanning, err 0x%04x"
msgstr "No se puede iniciar el escaneo. status: 0x%02x"

#: ports/nrf/common-hal/bleio/Device.c
#, fuzzy
msgid "Failed to stop advertising"
msgstr "No se puede detener el anuncio. status: 0x%02x"

#: ports/nrf/common-hal/bleio/Broadcaster.c
#: ports/nrf/common-hal/bleio/Peripheral.c
#, fuzzy, c-format
msgid "Failed to stop advertising, err 0x%04x"
msgstr "No se puede detener el anuncio. status: 0x%02x"

#: ports/nrf/common-hal/bleio/Characteristic.c
#, fuzzy, c-format
msgid "Failed to write attribute value, err 0x%04x"
msgstr "No se puede escribir el valor del atributo. status: 0x%02x"

#: ports/nrf/common-hal/bleio/Characteristic.c
#, fuzzy, c-format
msgid "Failed to write gatts value, err 0x%04x"
msgstr "No se puede escribir el valor del atributo. status: 0x%02x"

#: py/moduerrno.c
msgid "File exists"
msgstr "El archivo ya existe"

#: ports/nrf/supervisor/internal_flash.c
msgid "Flash erase failed"
msgstr "Falló borrado de flash"

#: ports/nrf/supervisor/internal_flash.c
#, c-format
msgid "Flash erase failed to start, err 0x%04x"
msgstr "Falló el iniciar borrado de flash, err 0x%04x"

#: ports/nrf/supervisor/internal_flash.c
msgid "Flash write failed"
msgstr "Falló la escritura"

#: ports/nrf/supervisor/internal_flash.c
#, c-format
msgid "Flash write failed to start, err 0x%04x"
msgstr "Falló el iniciar la escritura de flash, err 0x%04x"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
msgid "Frequency captured is above capability. Capture Paused."
msgstr "Frecuencia capturada por encima de la capacidad. Captura en pausa."

#: shared-bindings/bitbangio/SPI.c shared-bindings/bitbangio/I2C.c
#: shared-bindings/busio/SPI.c shared-bindings/busio/I2C.c
msgid "Function requires lock"
msgstr "La función requiere lock"

#: shared-module/displayio/Group.c
msgid "Group full"
msgstr "Group lleno"

#: extmod/vfs_posix_file.c py/objstringio.c
msgid "I/O operation on closed file"
msgstr "Operación I/O en archivo cerrado"

#: extmod/machine_i2c.c
msgid "I2C operation not supported"
msgstr "operación I2C no soportada"

#: py/persistentcode.c
msgid ""
"Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/"
"mpy-update for more info."
msgstr ""
"Archivo .mpy incompatible. Actualice todos los archivos .mpy. Consulte "
"http://adafru.it/mpy-update para más información"

#: shared-bindings/_pew/PewPew.c
msgid "Incorrect buffer size"
msgstr "Tamaño incorrecto del buffer"

#: py/moduerrno.c
msgid "Input/output error"
msgstr "error Input/output"

#: shared-module/displayio/OnDiskBitmap.c
msgid "Invalid BMP file"
msgstr "Archivo BMP inválido"

#: ports/atmel-samd/common-hal/pulseio/PWMOut.c
#: ports/nrf/common-hal/pulseio/PWMOut.c shared-bindings/pulseio/PWMOut.c
msgid "Invalid PWM frequency"
msgstr "Frecuencia PWM inválida"

#: py/moduerrno.c
msgid "Invalid argument"
msgstr "Argumento inválido"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Invalid bit clock pin"
msgstr "Pin bit clock inválido"

#: shared-module/displayio/Bitmap.c
msgid "Invalid bits per value"
msgstr ""

#: ports/nrf/common-hal/busio/UART.c
msgid "Invalid buffer size"
msgstr "Tamaño de buffer inválido"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
msgid "Invalid capture period. Valid range: 1 - 500"
msgstr ""

#: shared-bindings/audioio/Mixer.c
msgid "Invalid channel count"
msgstr "Cuenta de canales inválida"

#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Invalid clock pin"
msgstr "Pin clock inválido"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Invalid data pin"
msgstr "Pin de datos inválido"

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Invalid direction."
msgstr "Dirección inválida."

#: shared-module/audioio/WaveFile.c
msgid "Invalid file"
msgstr "Archivo inválido"

#: shared-module/audioio/WaveFile.c
msgid "Invalid format chunk size"
msgstr ""

#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "Invalid number of bits"
msgstr "Numero inválido de bits"

#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "Invalid phase"
msgstr "Fase inválida"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#: ports/atmel-samd/common-hal/touchio/TouchIn.c
#: shared-bindings/pulseio/PWMOut.c
msgid "Invalid pin"
msgstr "Pin inválido"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Invalid pin for left channel"
msgstr "Pin inválido para canal izquierdo"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Invalid pin for right channel"
msgstr "Pin inválido para canal derecho"

#: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c
#: ports/atmel-samd/common-hal/busio/UART.c
#: ports/atmel-samd/common-hal/busio/SPI.c
#: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c
msgid "Invalid pins"
msgstr "pines inválidos"

#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "Invalid polarity"
msgstr "Polaridad inválida"

#: shared-bindings/microcontroller/__init__.c
msgid "Invalid run mode."
msgstr "Modo de ejecución inválido."

#: shared-bindings/audioio/Mixer.c
msgid "Invalid voice count"
msgstr "Cuenta de voces inválida"

#: shared-module/audioio/WaveFile.c
msgid "Invalid wave file"
msgstr "Archivo wave inválido"

#: py/compile.c
msgid "LHS of keyword arg must be an id"
msgstr "LHS del agumento por palabra clave deberia ser un identificador"

#: shared-module/displayio/Group.c
msgid "Layer must be a Group or TileGrid subclass."
msgstr "Layer debe ser una subclase de Group o TileGrid."

#: py/objslice.c
msgid "Length must be an int"
msgstr "Length debe ser un int"

#: py/objslice.c
msgid "Length must be non-negative"
msgstr "Longitud no deberia ser negativa"

#: supervisor/shared/safe_mode.c
msgid ""
"Looks like our core CircuitPython code crashed hard. Whoops!\n"
"Please file an issue at https://github.com/adafruit/circuitpython/issues\n"
" with the contents of your CIRCUITPY drive and this message:\n"
msgstr ""
"Parece que nuestro código de CircuitPython ha fallado con fuerza. Whoops!\n"
"Por favor, crea un issue en https://github.com/adafruit/circuitpython/"
"issues\n"
" con el contenido de su unidad CIRCUITPY y este mensaje:\n"

#: shared-module/bitbangio/SPI.c
msgid "MISO pin init failed."
msgstr "MISO pin init fallido."

#: shared-module/bitbangio/SPI.c
msgid "MOSI pin init failed."
msgstr "MOSI pin init fallido."

#: shared-module/displayio/Shape.c
#, c-format
msgid "Maximum x value when mirrored is %d"
msgstr "Valor máximo de x cuando se refleja es %d"

#: supervisor/shared/safe_mode.c
msgid "MicroPython NLR jump failed. Likely memory corruption.\n"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "MicroPython fatal error.\n"
msgstr "Error fatal de MicroPython.\n"

#: shared-bindings/audiobusio/PDMIn.c
msgid "Microphone startup delay must be in range 0.0 to 1.0"
msgstr ""

#: shared-bindings/displayio/Display.c
msgid "Must be a Group subclass."
msgstr "Debe ser una subclase de Group."

#: ports/atmel-samd/common-hal/analogio/AnalogOut.c
msgid "No DAC on chip"
msgstr "El chip no tiene DAC"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "No DMA channel found"
msgstr "No se encontró el canal DMA"

#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
msgid "No RX pin"
msgstr "Sin pin RX"

#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
msgid "No TX pin"
msgstr "Sin pin TX"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
msgid "No available clocks"
msgstr "Relojes no disponibles"

#: shared-bindings/board/__init__.c
msgid "No default %q bus"
msgstr "Sin bus %q por defecto"

#: ports/atmel-samd/common-hal/touchio/TouchIn.c
msgid "No free GCLKs"
msgstr "Sin GCLKs libres"

#: shared-bindings/os/__init__.c
msgid "No hardware random available"
msgstr "No hay hardware random disponible"

#: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c
#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
msgid "No hardware support on pin"
msgstr "Sin soporte de hardware en pin"

#: py/moduerrno.c
msgid "No space left on device"
msgstr "No queda espacio en el dispositivo"

#: py/moduerrno.c
msgid "No such file/directory"
msgstr "No existe el archivo/directorio"

#: shared-bindings/bleio/CharacteristicBuffer.c
#, fuzzy
msgid "Not connected"
msgstr "No se puede conectar a AP"

#: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c
msgid "Not playing"
msgstr ""

#: shared-bindings/util.c
msgid ""
"Object has been deinitialized and can no longer be used. Create a new object."
msgstr ""
"El objeto se ha desinicializado y ya no se puede utilizar. Crea un nuevo "
"objeto"

#: ports/nrf/common-hal/busio/UART.c
msgid "Odd parity is not supported"
msgstr "Paridad impar no soportada"

#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Only 8 or 16 bit mono with "
msgstr "Solo mono de 8 o 16 bit con "

#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only Windows format, uncompressed BMP supported: given header size is %d"
msgstr ""

#: shared-module/displayio/OnDiskBitmap.c
#, c-format
msgid ""
"Only monochrome, indexed 8bpp, and 16bpp or greater BMPs supported: %d bpp "
"given"
msgstr ""

#: shared-bindings/_pixelbuf/PixelBuf.c
#, fuzzy
msgid "Only slices with step=1 (aka None) are supported"
msgstr "solo se admiten segmentos con step=1 (alias None)"

#: shared-bindings/audiobusio/PDMIn.c
msgid "Oversample must be multiple of 8."
msgstr ""

#: shared-bindings/pulseio/PWMOut.c
msgid ""
"PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)"
msgstr ""

#: shared-bindings/pulseio/PWMOut.c
msgid ""
"PWM frequency not writable when variable_frequency is False on construction."
msgstr ""

#: py/moduerrno.c
msgid "Permission denied"
msgstr "Permiso denegado"

#: ports/atmel-samd/common-hal/analogio/AnalogIn.c
#: ports/nrf/common-hal/analogio/AnalogIn.c
msgid "Pin does not have ADC capabilities"
msgstr "Pin no tiene capacidad ADC"

#: shared-bindings/_pixelbuf/PixelBuf.c
msgid "Pixel beyond bounds of buffer"
msgstr ""

#: py/builtinhelp.c
#, fuzzy
msgid "Plus any modules on the filesystem\n"
msgstr "Incapaz de montar de nuevo el sistema de archivos"

#: main.c
msgid "Press any key to enter the REPL. Use CTRL-D to reload."
msgstr ""
"Presiona cualquier tecla para entrar al REPL. Usa CTRL-D para recargar."

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Pull not used when direction is output."
msgstr "Pull no se usa cuando la dirección es output."

#: ports/nrf/common-hal/rtc/RTC.c
msgid "RTC calibration is not supported on this board"
msgstr "Calibración de RTC no es soportada en esta placa"

#: shared-bindings/time/__init__.c
msgid "RTC is not supported on this board"
msgstr "RTC no soportado en esta placa"

#: shared-bindings/_pixelbuf/PixelBuf.c
#, fuzzy
msgid "Range out of bounds"
msgstr "address fuera de límites"

#: shared-bindings/pulseio/PulseIn.c
msgid "Read-only"
msgstr "Solo-lectura"

#: extmod/vfs_fat.c py/moduerrno.c
msgid "Read-only filesystem"
msgstr "Sistema de archivos de solo-Lectura"

#: shared-module/displayio/Bitmap.c
#, fuzzy
msgid "Read-only object"
msgstr "Solo-lectura"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Right channel unsupported"
msgstr "Canal derecho no soportado"

#: shared-bindings/_pew/PewPew.c
msgid "Row entry must be digitalio.DigitalInOut"
msgstr ""

#: main.c
msgid "Running in safe mode! Auto-reload is off.\n"
msgstr "Ejecutando en modo seguro! La auto-recarga esta deshabilitada.\n"

#: main.c
msgid "Running in safe mode! Not running saved code.\n"
msgstr "Ejecutando en modo seguro! No se esta ejecutando el código guardado.\n"

#: ports/atmel-samd/common-hal/busio/I2C.c
msgid "SDA or SCL needs a pull up"
msgstr "SDA o SCL necesitan una pull up"

#: shared-bindings/audioio/Mixer.c
msgid "Sample rate must be positive"
msgstr "Sample rate debe ser positivo"

#: ports/atmel-samd/common-hal/audioio/AudioOut.c
#, c-format
msgid "Sample rate too high. It must be less than %d"
msgstr "Frecuencia de muestreo demasiado alta. Debe ser menor a %d"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Serializer in use"
msgstr "Serializer está siendo utilizado"

#: shared-bindings/nvm/ByteArray.c
msgid "Slice and value different lengths."
msgstr ""

#: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/TileGrid.c
#: shared-bindings/displayio/Group.c shared-bindings/pulseio/PulseIn.c
msgid "Slices not supported"
msgstr ""

#: ports/nrf/common-hal/bleio/Adapter.c
#, c-format
msgid "Soft device assert, id: 0x%08lX, pc: 0x%08lX"
msgstr ""

#: extmod/modure.c
msgid "Splitting with sub-captures"
msgstr "Dividiendo con sub-capturas"

#: shared-bindings/supervisor/__init__.c
msgid "Stack size must be at least 256"
msgstr ""

#: shared-bindings/multiterminal/__init__.c
msgid "Stream missing readinto() or write() method."
msgstr "A Stream le falta el método readinto() o write()."

#: supervisor/shared/safe_mode.c
msgid ""
"The CircuitPython heap was corrupted because the stack was too small.\n"
"Please increase stack size limits and press reset (after ejecting "
"CIRCUITPY).\n"
"If you didn't change the stack, then file an issue here with the contents of "
"your CIRCUITPY drive:\n"
msgstr ""

#: supervisor/shared/safe_mode.c
#, fuzzy
msgid ""
"The microcontroller's power dipped. Please make sure your power supply "
"provides\n"
"enough power for the whole circuit and press reset (after ejecting "
"CIRCUITPY).\n"
msgstr ""
"La alimentación del microcontrolador cayó. Por favor asegurate de que tu "
"fuente de alimentación provee\n"
"suficiente energia para todo el circuito y presiona el botón de reset "
"(despuesde expulsar CIRCUITPY).\n"

#: supervisor/shared/safe_mode.c
msgid ""
"The reset button was pressed while booting CircuitPython. Press again to "
"exit safe mode.\n"
msgstr ""
"El botón reset fue presionado mientras arrancaba CircuitPython. Presiona "
"otra vez para salir del modo seguro.\n"

#: shared-module/audioio/Mixer.c
msgid "The sample's bits_per_sample does not match the mixer's"
msgstr "Los bits_per_sample del sample no igualan a los del mixer"

#: shared-module/audioio/Mixer.c
msgid "The sample's channel count does not match the mixer's"
msgstr "La cuenta de canales del sample no iguala a las del mixer"

#: shared-module/audioio/Mixer.c
msgid "The sample's sample rate does not match the mixer's"
msgstr "El sample rate del sample no iguala al del mixer"

#: shared-module/audioio/Mixer.c
msgid "The sample's signedness does not match the mixer's"
msgstr "El signo del sample no iguala al del mixer"

#: shared-bindings/displayio/TileGrid.c
msgid "Tile height must exactly divide bitmap height"
msgstr "La altura del Tile debe dividir exacto la altura del bitmap"

#: shared-bindings/displayio/TileGrid.c
msgid "Tile indices must be 0 - 255"
msgstr "Los índices de Tile deben ser 0 - 255"

#: shared-bindings/displayio/TileGrid.c
msgid "Tile width must exactly divide bitmap width"
msgstr ""

#: supervisor/shared/safe_mode.c
msgid "To exit, please reset the board without "
msgstr "Para salir, por favor reinicia la tarjeta sin "

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
msgid "Too many channels in sample."
msgstr "Demasiados canales en sample."

#: shared-bindings/displayio/FourWire.c shared-bindings/displayio/ParallelBus.c
msgid "Too many display busses"
msgstr ""

#: shared-bindings/displayio/Display.c
msgid "Too many displays"
msgstr "Muchos displays"

#: py/obj.c
msgid "Traceback (most recent call last):\n"
msgstr "Traceback (ultima llamada reciente):\n"

#: shared-bindings/time/__init__.c
msgid "Tuple or struct_time argument required"
msgstr "Argumento tuple o struct_time requerido"

#: shared-module/usb_hid/Device.c
msgid "USB Busy"
msgstr "USB ocupado"

#: shared-module/usb_hid/Device.c
msgid "USB Error"
msgstr "Error USB"

#: shared-bindings/bleio/UUID.c
msgid "UUID integer value not in range 0 to 0xffff"
msgstr ""

#: shared-bindings/bleio/UUID.c
msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'"
msgstr ""

#: shared-bindings/bleio/UUID.c
msgid "UUID value is not str, int or byte buffer"
msgstr ""

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audioio/AudioOut.c
msgid "Unable to allocate buffers for signed conversion"
msgstr "No se pudieron asignar buffers para la conversión con signo"

#: ports/atmel-samd/common-hal/audiobusio/I2SOut.c
#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "Unable to find free GCLK"
msgstr "No se pudo encontrar un GCLK libre"

#: py/parse.c
msgid "Unable to init parser"
msgstr "Incapaz de inicializar el parser"

#: shared-module/displayio/OnDiskBitmap.c
msgid "Unable to read color palette data"
msgstr "No se pudo leer los datos de la paleta de colores"

#: shared-bindings/nvm/ByteArray.c
msgid "Unable to write to nvm."
msgstr "Imposible escribir en nvm"

#: ports/nrf/common-hal/bleio/UUID.c
msgid "Unexpected nrfx uuid type"
msgstr ""

#: shared-bindings/_pixelbuf/PixelBuf.c
#, c-format
msgid "Unmatched number of items on RHS (expected %d, got %d)."
msgstr ""

#: ports/atmel-samd/common-hal/busio/I2C.c
msgid "Unsupported baudrate"
msgstr "Baudrate no soportado"

#: shared-module/displayio/Display.c
#, fuzzy
msgid "Unsupported display bus type"
msgstr "tipo de bitmap no soportado"

#: shared-module/audioio/WaveFile.c
msgid "Unsupported format"
msgstr "Formato no soportado"

#: py/moduerrno.c
msgid "Unsupported operation"
msgstr "Operación no soportada"

#: shared-bindings/digitalio/DigitalInOut.c
msgid "Unsupported pull value."
msgstr "valor pull no soportado."

#: py/emitnative.c
msgid "Viper functions don't currently support more than 4 arguments"
msgstr "funciones Viper actualmente no soportan más de 4 argumentos."

#: shared-module/audioio/Mixer.c
msgid "Voice index too high"
msgstr "Index de voz demasiado alto"

#: main.c
msgid "WARNING: Your code filename has two extensions\n"
msgstr "ADVERTENCIA: El nombre de archivo de tu código tiene dos extensiones\n"

#: py/builtinhelp.c
#, c-format
msgid ""
"Welcome to Adafruit CircuitPython %s!\n"
"\n"
"Please visit learn.adafruit.com/category/circuitpython for project guides.\n"
"\n"
"To list built-in modules please do `help(\"modules\")`.\n"
msgstr ""
"Bienvenido a Adafruit CircuitPython %s!\n"
"\n"
"Visita learn.adafruit.com/category/circuitpython para obtener guías de "
"proyectos.\n"
"\n"
"Para listar los módulos incorporados por favor haga `help(\"modules\")`.\n"

#: supervisor/shared/safe_mode.c
#, fuzzy
msgid ""
"You are running in safe mode which means something unanticipated happened.\n"
msgstr ""
"Estás ejecutando en modo seguro, lo cual significa que algo realmente malo "
"ha sucedido.\n"

#: supervisor/shared/safe_mode.c
msgid "You requested starting safe mode by "
msgstr "Solicitaste iniciar en modo seguro por "

#: py/objtype.c
msgid "__init__() should return None"
msgstr "__init__() deberia devolver None"

#: py/objtype.c
#, c-format
msgid "__init__() should return None, not '%s'"
msgstr "__init__() deberia devolver None, no '%s'"

#: py/objobject.c
msgid "__new__ arg must be a user-type"
msgstr "__new__ arg debe ser un user-type"

#: extmod/modubinascii.c extmod/moduhashlib.c
msgid "a bytes-like object is required"
msgstr "se requiere un objeto bytes-like"

#: lib/embed/abort_.c
msgid "abort() called"
msgstr "se llamó abort()"

#: extmod/machine_mem.c
#, c-format
msgid "address %08x is not aligned to %d bytes"
msgstr "la dirección %08x no esta alineada a %d bytes"

#: shared-bindings/i2cslave/I2CSlave.c
msgid "address out of bounds"
msgstr "address fuera de límites"

#: shared-bindings/i2cslave/I2CSlave.c
msgid "addresses is empty"
msgstr "addresses esta vacío"

#: py/modbuiltins.c
msgid "arg is an empty sequence"
msgstr "argumento es una secuencia vacía"

#: py/runtime.c
msgid "argument has wrong type"
msgstr "el argumento tiene un tipo erroneo"

#: py/argcheck.c shared-bindings/gamepad/__init__.c
#: shared-bindings/gamepad/GamePad.c
msgid "argument num/types mismatch"
msgstr "argumento número/tipos no coinciden"

#: py/runtime.c
msgid "argument should be a '%q' not a '%q'"
msgstr "argumento deberia ser un '%q' no un '%q'"

#: py/objarray.c shared-bindings/nvm/ByteArray.c
msgid "array/bytes required on right side"
msgstr "array/bytes requeridos en el lado derecho"

#: py/objstr.c
msgid "attributes not supported yet"
msgstr "atributos aún no soportados"

#: ports/nrf/common-hal/bleio/Characteristic.c
msgid "bad GATT role"
msgstr ""

#: py/builtinevex.c
msgid "bad compile mode"
msgstr "modo de compilación erroneo"

#: py/objstr.c
msgid "bad conversion specifier"
msgstr "especificador de conversion erroneo"

#: py/objstr.c
msgid "bad format string"
msgstr "formato de string erroneo"

#: py/binary.c
msgid "bad typecode"
msgstr "typecode erroneo"

#: py/emitnative.c
msgid "binary op %q not implemented"
msgstr "operacion binaria %q no implementada"

#: shared-bindings/busio/UART.c
msgid "bits must be 7, 8 or 9"
msgstr "bits deben ser 7, 8 o 9"

#: extmod/machine_spi.c
msgid "bits must be 8"
msgstr "bits debe ser 8"

#: shared-bindings/audioio/Mixer.c
msgid "bits_per_sample must be 8 or 16"
msgstr "bits_per_sample debe ser 8 o 16"

#: py/emitinlinethumb.c
msgid "branch not in range"
msgstr "El argumento de chr() no esta en el rango(256)"

#: shared-bindings/_pixelbuf/PixelBuf.c
#, c-format
msgid "buf is too small. need %d bytes"
msgstr ""

#: shared-bindings/audioio/RawSample.c
msgid "buffer must be a bytes-like object"
msgstr "buffer debe de ser un objeto bytes-like"

#: shared-module/struct/__init__.c
#, fuzzy
msgid "buffer size must match format"
msgstr "los buffers deben de tener la misma longitud"

#: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c
msgid "buffer slices must be of equal length"
msgstr ""

#: py/modstruct.c shared-bindings/struct/__init__.c
#: shared-module/struct/__init__.c
msgid "buffer too small"
msgstr "buffer demasiado pequeño"

#: extmod/machine_spi.c
msgid "buffers must be the same length"
msgstr "los buffers deben de tener la misma longitud"

#: shared-bindings/_pew/PewPew.c
msgid "buttons must be digitalio.DigitalInOut"
msgstr ""

#: py/vm.c
msgid "byte code not implemented"
msgstr "codigo byte no implementado"

#: shared-bindings/_pixelbuf/PixelBuf.c
#, c-format
msgid "byteorder is not an instance of ByteOrder (got a %s)"
msgstr ""

#: ports/atmel-samd/common-hal/busio/UART.c
msgid "bytes > 8 bits not supported"
msgstr "bytes > 8 bits no soportados"

#: py/objstr.c
msgid "bytes value out of range"
msgstr "valor de bytes fuera de rango"

#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is out of range"
msgstr "calibration esta fuera de rango"

#: ports/atmel-samd/bindings/samd/Clock.c
msgid "calibration is read only"
msgstr "calibration es de solo lectura"

#: ports/atmel-samd/common-hal/rtc/RTC.c
msgid "calibration value out of range +/-127"
msgstr "Valor de calibración fuera del rango +/-127"

#: py/emitinlinethumb.c
msgid "can only have up to 4 parameters to Thumb assembly"
msgstr "solo puede tener hasta 4 parámetros para ensamblar Thumb"

#: py/emitinlinextensa.c
msgid "can only have up to 4 parameters to Xtensa assembly"
msgstr "solo puede tener hasta 4 parámetros para ensamblador Xtensa"

#: py/persistentcode.c
msgid "can only save bytecode"
msgstr "solo puede almacenar bytecode"

#: py/objtype.c
msgid "can't add special method to already-subclassed class"
msgstr "no se puede agregar un método a una clase ya subclasificada"

#: py/compile.c
msgid "can't assign to expression"
msgstr "no se puede asignar a la expresión"

#: py/obj.c
#, c-format
msgid "can't convert %s to complex"
msgstr "no se puede convertir %s a complejo"

#: py/obj.c
#, c-format
msgid "can't convert %s to float"
msgstr "no se puede convertir %s a float"

#: py/obj.c
#, c-format
msgid "can't convert %s to int"
msgstr "no se puede convertir %s a int"

#: py/objstr.c
msgid "can't convert '%q' object to %q implicitly"
msgstr "no se puede convertir el objeto '%q' a %q implícitamente"

#: py/objint.c
msgid "can't convert NaN to int"
msgstr "no se puede convertir Nan a int"

#: shared-bindings/i2cslave/I2CSlave.c
msgid "can't convert address to int"
msgstr "no se puede convertir address a int"

#: py/objint.c
msgid "can't convert inf to int"
msgstr "no se puede convertir inf en int"

#: py/obj.c
msgid "can't convert to complex"
msgstr "no se puede convertir a complejo"

#: py/obj.c
msgid "can't convert to float"
msgstr "no se puede convertir a float"

#: py/obj.c
msgid "can't convert to int"
msgstr "no se puede convertir a int"

#: py/objstr.c
msgid "can't convert to str implicitly"
msgstr "no se puede convertir a str implícitamente"

#: py/compile.c
msgid "can't declare nonlocal in outer code"
msgstr "no se puede declarar nonlocal"

#: py/compile.c
msgid "can't delete expression"
msgstr "no se puede borrar la expresión"

#: py/emitnative.c
msgid "can't do binary op between '%q' and '%q'"
msgstr "no se puede hacer una operacion binaria entre '%q' y '%q'"

#: py/objcomplex.c
msgid "can't do truncated division of a complex number"
msgstr "no se puede hacer la división truncada de un número complejo"

#: py/compile.c
msgid "can't have multiple **x"
msgstr "no puede tener multiples *x"

#: py/compile.c
msgid "can't have multiple *x"
msgstr "no puede tener multiples *x"

#: py/emitnative.c
msgid "can't implicitly convert '%q' to 'bool'"
msgstr "no se puede convertir implícitamente '%q' a 'bool'"

#: py/emitnative.c
msgid "can't load from '%q'"
msgstr "no se puede cargar desde '%q'"

#: py/emitnative.c
msgid "can't load with '%q' index"
msgstr "no se puede cargar con el índice '%q'"

#: py/objgenerator.c
msgid "can't pend throw to just-started generator"
msgstr "no se puede colgar al generador recién iniciado"

#: py/objgenerator.c
msgid "can't send non-None value to a just-started generator"
msgstr ""
"no se puede enviar un valor que no sea None a un generador recién iniciado"

#: py/objnamedtuple.c
msgid "can't set attribute"
msgstr "no se puede asignar el atributo"

#: py/emitnative.c
msgid "can't store '%q'"
msgstr "no se puede almacenar '%q'"

#: py/emitnative.c
msgid "can't store to '%q'"
msgstr "no se puede almacenar para '%q'"

#: py/emitnative.c
msgid "can't store with '%q' index"
msgstr "no se puede almacenar con el indice '%q'"

#: py/objstr.c
msgid ""
"can't switch from automatic field numbering to manual field specification"
msgstr ""
"no se puede cambiar de la numeración automática de campos a la "
"especificación de campo manual"

#: py/objstr.c
msgid ""
"can't switch from manual field specification to automatic field numbering"
msgstr ""
"no se puede cambiar de especificación de campo manual a numeración "
"automática de campos"

#: py/objtype.c
msgid "cannot create '%q' instances"
msgstr "no se pueden crear '%q' instancias"

#: py/objtype.c
msgid "cannot create instance"
msgstr "no se puede crear instancia"

#: py/runtime.c
msgid "cannot import name %q"
msgstr "no se puede importar name '%q'"

#: py/builtinimport.c
msgid "cannot perform relative import"
msgstr "no se puedo realizar importación relativa"

#: py/emitnative.c
msgid "casting"
msgstr ""

#: shared-bindings/bleio/Service.c
msgid "characteristics includes an object that is not a Characteristic"
msgstr ""

#: shared-bindings/_stage/Text.c
msgid "chars buffer too small"
msgstr "chars buffer muy pequeño"

#: py/modbuiltins.c
msgid "chr() arg not in range(0x110000)"
msgstr "El argumento de chr() esta fuera de rango(0x110000)"

#: py/modbuiltins.c
msgid "chr() arg not in range(256)"
msgstr "El argumento de chr() no esta en el rango(256)"

#: shared-bindings/displayio/Palette.c
msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)"
msgstr ""

#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a buffer or int"
msgstr "color buffer deber ser un buffer o un int"

#: shared-bindings/displayio/Palette.c
msgid "color buffer must be a bytearray or array of type 'b' or 'B'"
msgstr "color buffer deberia ser un bytearray o array de tipo 'b' o 'B'"

#: shared-bindings/displayio/Palette.c
msgid "color must be between 0x000000 and 0xffffff"
msgstr "color debe estar entre 0x000000 y 0xffffff"

#: shared-bindings/displayio/ColorConverter.c
msgid "color should be an int"
msgstr "color deberia ser un int"

#: py/objcomplex.c
msgid "complex division by zero"
msgstr "división compleja por cero"

#: py/parsenum.c py/objfloat.c
msgid "complex values not supported"
msgstr "valores complejos no soportados"

#: extmod/moduzlib.c
msgid "compression header"
msgstr "encabezado de compresión"

#: py/parse.c
msgid "constant must be an integer"
msgstr "constant debe ser un entero"

#: py/emitnative.c
msgid "conversion to object"
msgstr "conversión a objeto"

#: py/parsenum.c
msgid "decimal numbers not supported"
msgstr "números decimales no soportados"

#: py/compile.c
msgid "default 'except' must be last"
msgstr "'except' por defecto deberia estar de último"

#: shared-bindings/audiobusio/PDMIn.c
msgid ""
"destination buffer must be a bytearray or array of type 'B' for bit_depth = 8"
msgstr ""
"el buffer de destino debe ser un bytearray o array de tipo 'B' para "
"bit_depth = 8"

#: shared-bindings/audiobusio/PDMIn.c
msgid "destination buffer must be an array of type 'H' for bit_depth = 16"
msgstr "el buffer de destino debe ser un array de tipo 'H' para bit_depth = 16"

#: shared-bindings/audiobusio/PDMIn.c
msgid "destination_length must be an int >= 0"
msgstr "destination_length debe ser un int >= 0"

#: py/objdict.c
msgid "dict update sequence has wrong length"
msgstr "la secuencia de actualizacion del dict tiene una longitud incorrecta"

#: py/runtime.c py/modmath.c py/objint_mpz.c py/objint_longlong.c py/objfloat.c
#: shared-bindings/math/__init__.c
msgid "division by zero"
msgstr "división por cero"

#: py/objdeque.c
msgid "empty"
msgstr "vacío"

#: extmod/modutimeq.c extmod/moduheapq.c
msgid "empty heap"
msgstr "heap vacío"

#: py/objstr.c
msgid "empty separator"
msgstr "separator vacío"

#: shared-bindings/random/__init__.c
msgid "empty sequence"
msgstr "secuencia vacía"

#: py/objstr.c
msgid "end of format while looking for conversion specifier"
msgstr "el final del formato mientras se busca el especificador de conversión"

#: shared-bindings/displayio/Shape.c
#, fuzzy
msgid "end_x should be an int"
msgstr "y deberia ser un int"

#: ports/nrf/common-hal/busio/UART.c
#, c-format
msgid "error = 0x%08lX"
msgstr "error = 0x%08lx"

#: py/runtime.c
msgid "exceptions must derive from BaseException"
msgstr "las excepciones deben derivar de BaseException"

#: py/objstr.c
msgid "expected ':' after format specifier"
msgstr "se espera ':' despues de un especificaro de tipo format"

#: py/obj.c
msgid "expected tuple/list"
msgstr "tupla/lista esperada"

#: py/modthread.c
msgid "expecting a dict for keyword args"
msgstr "esperando un diccionario para argumentos por palabra clave"

#: py/compile.c
msgid "expecting an assembler instruction"
msgstr "esperando una instrucción de ensamblador"

#: py/compile.c
msgid "expecting just a value for set"
msgstr "esperando solo un valor para set"

#: py/compile.c
msgid "expecting key:value for dict"
msgstr "esperando la clave:valor para dict"

#: py/argcheck.c
msgid "extra keyword arguments given"
msgstr "argumento(s) por palabra clave adicionales fueron dados"

#: py/argcheck.c
msgid "extra positional arguments given"
msgstr "argumento posicional adicional dado"

#: shared-bindings/displayio/OnDiskBitmap.c shared-bindings/audioio/WaveFile.c
msgid "file must be a file opened in byte mode"
msgstr "el archivo deberia ser una archivo abierto en modo byte"

#: shared-bindings/storage/__init__.c
msgid "filesystem must provide mount method"
msgstr "sistema de archivos debe proporcionar método de montaje"

#: py/objtype.c
msgid "first argument to super() must be type"
msgstr "primer argumento para super() debe ser de tipo"

#: extmod/machine_spi.c
msgid "firstbit must be MSB"
msgstr "firstbit debe ser MSB"

#: py/objint.c
msgid "float too big"
msgstr ""

#: shared-bindings/_stage/Text.c
msgid "font must be 2048 bytes long"
msgstr "font debe ser 2048 bytes de largo"

#: py/objstr.c
msgid "format requires a dict"
msgstr "format requiere un dict"

#: py/objdeque.c
msgid "full"
msgstr "lleno"

#: py/argcheck.c
msgid "function does not take keyword arguments"
msgstr "la función no tiene argumentos por palabra clave"

#: py/argcheck.c
#, c-format
msgid "function expected at most %d arguments, got %d"
msgstr "la función esperaba minimo %d argumentos, tiene %d"

#: py/objnamedtuple.c py/bc.c
msgid "function got multiple values for argument '%q'"
msgstr "la función tiene múltiples valores para el argumento '%q'"

#: py/argcheck.c
#, c-format
msgid "function missing %d required positional arguments"
msgstr "a la función le hacen falta %d argumentos posicionales requeridos"

#: py/bc.c
msgid "function missing keyword-only argument"
msgstr "falta palabra clave para función"

#: py/bc.c
msgid "function missing required keyword argument '%q'"
msgstr "la función requiere del argumento por palabra clave '%q'"

#: py/bc.c
#, c-format
msgid "function missing required positional argument #%d"
msgstr "la función requiere del argumento posicional #%d"

#: py/argcheck.c py/objnamedtuple.c py/bc.c
#, c-format
msgid "function takes %d positional arguments but %d were given"
msgstr "la función toma %d argumentos posicionales pero le fueron dados %d"

#: shared-bindings/time/__init__.c
msgid "function takes exactly 9 arguments"
msgstr "la función toma exactamente 9 argumentos."

#: py/objgenerator.c
msgid "generator already executing"
msgstr "generador ya se esta ejecutando"

#: py/objgenerator.c
msgid "generator ignored GeneratorExit"
msgstr "generador ignorado GeneratorExit"

#: shared-bindings/_stage/Layer.c
msgid "graphic must be 2048 bytes long"
msgstr "graphic debe ser 2048 bytes de largo"

#: extmod/moduheapq.c
msgid "heap must be a list"
msgstr "heap debe ser una lista"

#: py/compile.c
msgid "identifier redefined as global"
msgstr "identificador redefinido como global"

#: py/compile.c
msgid "identifier redefined as nonlocal"
msgstr "identificador redefinido como nonlocal"

#: py/objstr.c
msgid "incomplete format"
msgstr "formato incompleto"

#: py/objstr.c
msgid "incomplete format key"
msgstr ""

#: extmod/modubinascii.c
msgid "incorrect padding"
msgstr "relleno (padding) incorrecto"

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c
msgid "index out of range"
msgstr "index fuera de rango"

#: py/obj.c
msgid "indices must be integers"
msgstr "indices deben ser enteros"

#: py/compile.c
msgid "inline assembler must be a function"
msgstr "ensamblador en línea debe ser una función"

#: py/parsenum.c
msgid "int() arg 2 must be >= 2 and <= 36"
msgstr "int() arg 2 debe ser >= 2 y <= 36"

#: py/objstr.c
msgid "integer required"
msgstr "Entero requerido"

#: ports/nrf/common-hal/bleio/Broadcaster.c
msgid "interval not in range 0.0020 to 10.24"
msgstr ""

#: extmod/machine_i2c.c
msgid "invalid I2C peripheral"
msgstr "periférico I2C inválido"

#: extmod/machine_spi.c
msgid "invalid SPI peripheral"
msgstr "periférico SPI inválido"

#: lib/netutils/netutils.c
msgid "invalid arguments"
msgstr "argumentos inválidos"

#: extmod/modussl_axtls.c
msgid "invalid cert"
msgstr "certificado inválido"

#: extmod/uos_dupterm.c
msgid "invalid dupterm index"
msgstr "index dupterm inválido"

#: extmod/modframebuf.c
msgid "invalid format"
msgstr "formato inválido"

#: py/objstr.c
msgid "invalid format specifier"
msgstr "especificador de formato inválido"

#: extmod/modussl_axtls.c
msgid "invalid key"
msgstr "llave inválida"

#: py/compile.c
msgid "invalid micropython decorator"
msgstr "decorador de micropython inválido"

#: shared-bindings/random/__init__.c
msgid "invalid step"
msgstr ""

#: py/compile.c py/parse.c
msgid "invalid syntax"
msgstr "sintaxis inválida"

#: py/parsenum.c
msgid "invalid syntax for integer"
msgstr "sintaxis inválida para entero"

#: py/parsenum.c
#, c-format
msgid "invalid syntax for integer with base %d"
msgstr "sintaxis inválida para entero con base %d"

#: py/parsenum.c
msgid "invalid syntax for number"
msgstr "sintaxis inválida para número"

#: py/objtype.c
msgid "issubclass() arg 1 must be a class"
msgstr "issubclass() arg 1 debe ser una clase"

#: py/objtype.c
msgid "issubclass() arg 2 must be a class or a tuple of classes"
msgstr "issubclass() arg 2 debe ser una clase o tuple de clases"

#: py/objstr.c
msgid "join expects a list of str/bytes objects consistent with self object"
msgstr ""
"join espera una lista de objetos str/bytes consistentes con el mismo objeto"

#: py/argcheck.c
msgid "keyword argument(s) not yet implemented - use normal args instead"
msgstr ""
"argumento(s) por palabra clave aún no implementados - usa argumentos "
"normales en su lugar"

#: py/bc.c
msgid "keywords must be strings"
msgstr "palabras clave deben ser strings"

#: py/emitinlinextensa.c py/emitinlinethumb.c
msgid "label '%q' not defined"
msgstr "etiqueta '%q' no definida"

#: py/compile.c
msgid "label redefined"
msgstr "etiqueta redefinida"

#: py/stream.c
msgid "length argument not allowed for this type"
msgstr "argumento length no permitido para este tipo"

#: py/objarray.c
msgid "lhs and rhs should be compatible"
msgstr "lhs y rhs deben ser compatibles"

#: py/emitnative.c
msgid "local '%q' has type '%q' but source is '%q'"
msgstr "la variable local '%q' tiene el tipo '%q' pero la fuente es '%q'"

#: py/emitnative.c
msgid "local '%q' used before type known"
msgstr "variable local '%q' usada antes del tipo conocido"

#: py/vm.c
msgid "local variable referenced before assignment"
msgstr "variable local referenciada antes de la asignación"

#: py/objint.c
msgid "long int not supported in this build"
msgstr "long int no soportado en esta compilación"

#: shared-bindings/_stage/Layer.c
msgid "map buffer too small"
msgstr "map buffer muy pequeño"

#: py/modmath.c shared-bindings/math/__init__.c
msgid "math domain error"
msgstr "error de dominio matemático"

#: py/runtime.c
msgid "maximum recursion depth exceeded"
msgstr "profundidad máxima de recursión excedida"

#: py/runtime.c
#, c-format
msgid "memory allocation failed, allocating %u bytes"
msgstr "la asignación de memoria falló, asignando %u bytes"

#: py/runtime.c
msgid "memory allocation failed, heap is locked"
msgstr "la asignación de memoria falló, el heap está bloqueado"

#: py/builtinimport.c
msgid "module not found"
msgstr "módulo no encontrado"

#: py/compile.c
msgid "multiple *x in assignment"
msgstr "múltiples *x en la asignación"

#: py/objtype.c
msgid "multiple bases have instance lay-out conflict"
msgstr ""

#: py/objtype.c
msgid "multiple inheritance not supported"
msgstr "herencia multiple no soportada"

#: py/emitnative.c
msgid "must raise an object"
msgstr "debe hacer un raise de un objeto"

#: extmod/machine_spi.c
msgid "must specify all of sck/mosi/miso"
msgstr "se deben de especificar sck/mosi/miso"

#: py/modbuiltins.c
msgid "must use keyword argument for key function"
msgstr "debe utilizar argumento de palabra clave para la función clave"

#: py/runtime.c
msgid "name '%q' is not defined"
msgstr "name '%q' no esta definido"

#: shared-bindings/bleio/Peripheral.c
#, fuzzy
msgid "name must be a string"
msgstr "palabras clave deben ser strings"

#: py/runtime.c
msgid "name not defined"
msgstr "name no definido"

#: py/compile.c
msgid "name reused for argument"
msgstr "nombre reusado para argumento"

#: py/emitnative.c
msgid "native yield"
msgstr ""

#: py/runtime.c
#, c-format
msgid "need more than %d values to unpack"
msgstr "necesita más de %d valores para descomprimir"

#: py/runtime.c py/objint_mpz.c py/objint_longlong.c
msgid "negative power with no float support"
msgstr "potencia negativa sin float support"

#: py/runtime.c py/objint_mpz.c
msgid "negative shift count"
msgstr "cuenta negativa de turnos"

#: py/vm.c
msgid "no active exception to reraise"
msgstr "exception no activa para reraise"

#: shared-bindings/socket/__init__.c shared-module/network/__init__.c
msgid "no available NIC"
msgstr "NIC no disponible"

#: py/compile.c
msgid "no binding for nonlocal found"
msgstr "no se ha encontrado ningún enlace para nonlocal"

#: py/builtinimport.c
msgid "no module named '%q'"
msgstr "ningún módulo se llama '%q'"

#: py/runtime.c shared-bindings/_pixelbuf/__init__.c
msgid "no such attribute"
msgstr "no hay tal atributo"

#: py/compile.c
msgid "non-default argument follows default argument"
msgstr "argumento no predeterminado sigue argumento predeterminado"

#: extmod/modubinascii.c
msgid "non-hex digit found"
msgstr "digito non-hex encontrado"

#: py/compile.c
msgid "non-keyword arg after */**"
msgstr "no deberia estar/tener agumento por palabra clave despues de */**"

#: py/compile.c
msgid "non-keyword arg after keyword arg"
msgstr ""
"no deberia estar/tener agumento por palabra clave despues de argumento por "
"palabra clave"

#: shared-bindings/bleio/UUID.c
msgid "not a 128-bit UUID"
msgstr ""

#: py/objstr.c
msgid "not all arguments converted during string formatting"
msgstr ""
"no todos los argumentos fueron convertidos durante el formato de string"

#: py/objstr.c
msgid "not enough arguments for format string"
msgstr "no suficientes argumentos para format string"

#: py/obj.c
#, c-format
msgid "object '%s' is not a tuple or list"
msgstr "el objeto '%s' no es una tupla o lista"

#: py/obj.c
msgid "object does not support item assignment"
msgstr "el objeto no soporta la asignación de elementos"

#: py/obj.c
msgid "object does not support item deletion"
msgstr "object no soporta la eliminación de elementos"

#: py/obj.c
msgid "object has no len"
msgstr "el objeto no tiene longitud"

#: py/obj.c
msgid "object is not subscriptable"
msgstr "el objeto no es suscriptable"

#: py/runtime.c
msgid "object not an iterator"
msgstr "objeto no es un iterator"

#: py/objtype.c py/runtime.c
msgid "object not callable"
msgstr "objeto no puede ser llamado"

#: py/sequence.c
msgid "object not in sequence"
msgstr "objeto no en secuencia"

#: py/runtime.c
msgid "object not iterable"
msgstr "objeto no iterable"

#: py/obj.c
#, c-format
msgid "object of type '%s' has no len()"
msgstr "el objeto de tipo '%s' no tiene len()"

#: py/obj.c
msgid "object with buffer protocol required"
msgstr "objeto con protocolo de buffer requerido"

#: extmod/modubinascii.c
msgid "odd-length string"
msgstr "string de longitud impar"

#: py/objstrunicode.c py/objstr.c
#, fuzzy
msgid "offset out of bounds"
msgstr "address fuera de límites"

#: py/objarray.c py/objtuple.c py/objstrunicode.c py/objstr.c
#: shared-bindings/nvm/ByteArray.c
msgid "only slices with step=1 (aka None) are supported"
msgstr "solo se admiten segmentos con step=1 (alias None)"

#: py/modbuiltins.c
msgid "ord expects a character"
msgstr "ord espera un carácter"

#: py/modbuiltins.c
#, c-format
msgid "ord() expected a character, but string of length %d found"
msgstr "ord() espera un carácter, pero encontró un string de longitud %d"

#: py/objint_mpz.c
msgid "overflow converting long int to machine word"
msgstr "desbordamiento convirtiendo long int a palabra de máquina"

#: shared-bindings/_stage/Text.c shared-bindings/_stage/Layer.c
msgid "palette must be 32 bytes long"
msgstr "palette debe ser 32 bytes de largo"

#: shared-bindings/displayio/Palette.c
msgid "palette_index should be an int"
msgstr "palette_index deberia ser un int"

#: py/compile.c
msgid "parameter annotation must be an identifier"
msgstr "parámetro de anotación debe ser un identificador"

#: py/emitinlinextensa.c
msgid "parameters must be registers in sequence a2 to a5"
msgstr "los parámetros deben ser registros en secuencia de a2 a a5"

#: py/emitinlinethumb.c
msgid "parameters must be registers in sequence r0 to r3"
msgstr "los parametros deben ser registros en secuencia del r0 al r3"

#: shared-bindings/displayio/Bitmap.c
#, fuzzy
msgid "pixel coordinates out of bounds"
msgstr "address fuera de límites"

#: shared-bindings/displayio/Bitmap.c
msgid "pixel value requires too many bits"
msgstr ""

#: shared-bindings/displayio/TileGrid.c
msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter"
msgstr "pixel_shader debe ser displayio.Palette o displayio.ColorConverter"

#: ports/atmel-samd/common-hal/pulseio/PulseIn.c
#: ports/nrf/common-hal/pulseio/PulseIn.c
msgid "pop from an empty PulseIn"
msgstr "pop de un PulseIn vacío"

#: py/objset.c
msgid "pop from an empty set"
msgstr "pop desde un set vacío"

#: py/objlist.c
msgid "pop from empty list"
msgstr "pop desde una lista vacía"

#: py/objdict.c
msgid "popitem(): dictionary is empty"
msgstr "popitem(): diccionario vacío"

#: py/objint_mpz.c
msgid "pow() 3rd argument cannot be 0"
msgstr "el 3er argumento de pow() no puede ser 0"

#: py/objint_mpz.c
msgid "pow() with 3 arguments requires integers"
msgstr "pow() con 3 argumentos requiere enteros"

#: extmod/modutimeq.c
msgid "queue overflow"
msgstr "desbordamiento de cola(queue)"

#: shared-bindings/_pixelbuf/PixelBuf.c
msgid "rawbuf is not the same size as buf"
msgstr ""

#: shared-bindings/_pixelbuf/__init__.c
#, fuzzy
msgid "readonly attribute"
msgstr "atributo no legible"

#: py/builtinimport.c
msgid "relative import"
msgstr "import relativo"

#: py/obj.c
#, c-format
msgid "requested length %d but object has length %d"
msgstr "longitud solicitada %d pero el objeto tiene longitud %d"

#: py/compile.c
msgid "return annotation must be an identifier"
msgstr "la anotación de retorno debe ser un identificador"

#: py/emitnative.c
msgid "return expected '%q' but got '%q'"
msgstr "retorno esperado '%q' pero se obtuvo '%q'"

#: py/objstr.c
msgid "rsplit(None,n)"
msgstr ""

#: shared-bindings/audioio/RawSample.c
msgid ""
"sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or "
"'B'"
msgstr ""
"sample_source buffer debe ser un bytearray o un array de tipo 'h', 'H', 'b' "
"o'B'"

#: ports/atmel-samd/common-hal/audiobusio/PDMIn.c
msgid "sampling rate out of range"
msgstr "frecuencia de muestreo fuera de rango"

#: py/modmicropython.c
msgid "schedule stack full"
msgstr ""

#: lib/utils/pyexec.c py/builtinimport.c
msgid "script compilation not supported"
msgstr "script de compilación no soportado"

#: shared-bindings/bleio/Peripheral.c
msgid "services includes an object that is not a Service"
msgstr ""

#: py/objstr.c
msgid "sign not allowed in string format specifier"
msgstr "signo no permitido en el espeficador de string format"

#: py/objstr.c
msgid "sign not allowed with integer format specifier 'c'"
msgstr "signo no permitido con el especificador integer format 'c'"

#: py/objstr.c
msgid "single '}' encountered in format string"
msgstr "un solo '}' encontrado en format string"

#: shared-bindings/time/__init__.c
msgid "sleep length must be non-negative"
msgstr "la longitud de sleep no puede ser negativa"

#: py/objslice.c py/sequence.c
msgid "slice step cannot be zero"
msgstr "slice step no puede ser cero"

#: py/sequence.c py/objint.c
msgid "small int overflow"
msgstr "pequeño int desbordamiento"

#: main.c
msgid "soft reboot\n"
msgstr "reinicio suave\n"

#: py/objstr.c
msgid "start/end indices"
msgstr "índices inicio/final"

#: shared-bindings/displayio/Shape.c
#, fuzzy
msgid "start_x should be an int"
msgstr "y deberia ser un int"

#: shared-bindings/random/__init__.c
msgid "step must be non-zero"
msgstr ""

#: shared-bindings/busio/UART.c
msgid "stop must be 1 or 2"
msgstr "stop debe ser 1 o 2"

#: shared-bindings/random/__init__.c
msgid "stop not reachable from start"
msgstr ""

#: py/stream.c
msgid "stream operation not supported"
msgstr "operación stream no soportada"

#: py/objstrunicode.c
msgid "string index out of range"
msgstr "string index fuera de rango"

#: py/objstrunicode.c
#, c-format
msgid "string indices must be integers, not %s"
msgstr "índices de string deben ser enteros, no %s"

#: py/stream.c
msgid "string not supported; use bytes or bytearray"
msgstr "string no soportado; usa bytes o bytearray"

#: extmod/moductypes.c
msgid "struct: cannot index"
msgstr "struct: no se puede indexar"

#: extmod/moductypes.c
msgid "struct: index out of range"
msgstr "struct: index fuera de rango"

#: extmod/moductypes.c
msgid "struct: no fields"
msgstr "struct: sin campos"

#: py/objstr.c
msgid "substring not found"
msgstr "substring no encontrado"

#: py/compile.c
msgid "super() can't find self"
msgstr "super() no puede encontrar self"

#: extmod/modujson.c
msgid "syntax error in JSON"
msgstr "error de sintaxis en JSON"

#: extmod/moductypes.c
msgid "syntax error in uctypes descriptor"
msgstr "error de sintaxis en el descriptor uctypes"

#: shared-bindings/touchio/TouchIn.c
msgid "threshold must be in the range 0-65536"
msgstr ""

#: shared-bindings/displayio/TileGrid.c
msgid "tile index out of bounds"
msgstr ""

#: shared-bindings/time/__init__.c
msgid "time.struct_time() takes a 9-sequence"
msgstr ""

#: shared-bindings/time/__init__.c
msgid "time.struct_time() takes exactly 1 argument"
msgstr "time.struct_time() acepta exactamente 1 argumento"

#: shared-bindings/busio/UART.c
msgid "timeout >100 (units are now seconds, not msecs)"
msgstr ""

#: shared-bindings/bleio/CharacteristicBuffer.c
#, fuzzy
msgid "timeout must be >= 0.0"
msgstr "bits debe ser 8"

#: shared-bindings/time/__init__.c
msgid "timestamp out of range for platform time_t"
msgstr ""

#: shared-module/struct/__init__.c
msgid "too many arguments provided with the given format"
msgstr "demasiados argumentos provistos con el formato dado"

#: py/runtime.c
#, c-format
msgid "too many values to unpack (expected %d)"
msgstr "demasiados valores para descomprimir (%d esperado)"

#: py/objstr.c
msgid "tuple index out of range"
msgstr "tuple index fuera de rango"

#: py/obj.c
msgid "tuple/list has wrong length"
msgstr "tupla/lista tiene una longitud incorrecta"

#: shared-bindings/_pixelbuf/PixelBuf.c
msgid "tuple/list required on RHS"
msgstr ""

#: ports/atmel-samd/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c
msgid "tx and rx cannot both be None"
msgstr "Ambos tx y rx no pueden ser None"

#: py/objtype.c
msgid "type '%q' is not an acceptable base type"
msgstr "type '%q' no es un tipo de base aceptable"

#: py/objtype.c
msgid "type is not an acceptable base type"
msgstr "type no es un tipo de base aceptable"

#: py/runtime.c
msgid "type object '%q' has no attribute '%q'"
msgstr "objeto de tipo '%q' no tiene atributo '%q'"

#: py/objtype.c
msgid "type takes 1 or 3 arguments"
msgstr "type acepta 1 o 3 argumentos"

#: py/objint_longlong.c
msgid "ulonglong too large"
msgstr "ulonglong muy largo"

#: py/emitnative.c
msgid "unary op %q not implemented"
msgstr "Operación unica %q no implementada"

#: py/parse.c
msgid "unexpected indent"
msgstr "sangría inesperada"

#: py/bc.c
msgid "unexpected keyword argument"
msgstr "argumento por palabra clave inesperado"

#: py/objnamedtuple.c py/bc.c
msgid "unexpected keyword argument '%q'"
msgstr "argumento por palabra clave inesperado '%q'"

#: py/lexer.c
msgid "unicode name escapes"
msgstr ""

#: py/parse.c
msgid "unindent does not match any outer indentation level"
msgstr "sangría no coincide con ningún nivel exterior"

#: py/objstr.c
#, c-format
msgid "unknown conversion specifier %c"
msgstr "especificador de conversión %c desconocido"

#: py/objstr.c
#, c-format
msgid "unknown format code '%c' for object of type '%s'"
msgstr "codigo format desconocido '%c' para el typo de objeto '%s'"

#: py/objstr.c
#, c-format
msgid "unknown format code '%c' for object of type 'float'"
msgstr "codigo format desconocido '%c' para el typo de objeto 'float'"

#: py/objstr.c
#, c-format
msgid "unknown format code '%c' for object of type 'str'"
msgstr "codigo format desconocido '%c' para objeto de tipo 'str'"

#: py/compile.c
msgid "unknown type"
msgstr "tipo desconocido"

#: py/emitnative.c
msgid "unknown type '%q'"
msgstr "tipo desconocido '%q'"

#: py/objstr.c
msgid "unmatched '{' in format"
msgstr "No coinciden '{' en format"

#: py/objtype.c py/runtime.c
msgid "unreadable attribute"
msgstr "atributo no legible"

#: shared-bindings/displayio/TileGrid.c
msgid "unsupported %q type"
msgstr "tipo de %q no soportado"

#: py/emitinlinethumb.c
#, c-format
msgid "unsupported Thumb instruction '%s' with %d arguments"
msgstr "instrucción de tipo Thumb no admitida '%s' con %d argumentos"

#: py/emitinlinextensa.c
#, c-format
msgid "unsupported Xtensa instruction '%s' with %d arguments"
msgstr "instrucción Xtensa '%s' con %d argumentos no soportada"

#: py/objstr.c
#, c-format
msgid "unsupported format character '%c' (0x%x) at index %d"
msgstr "carácter no soportado '%c' (0x%x) en índice %d"

#: py/runtime.c
msgid "unsupported type for %q: '%s'"
msgstr "tipo no soportado para %q: '%s'"

#: py/runtime.c
msgid "unsupported type for operator"
msgstr "tipo de operador no soportado"

#: py/runtime.c
msgid "unsupported types for %q: '%s', '%s'"
msgstr "tipos no soportados para %q: '%s', '%s'"

#: shared-bindings/displayio/Bitmap.c
msgid "value_count must be > 0"
msgstr ""

#: shared-bindings/_pixelbuf/PixelBuf.c
msgid "write_args must be a list, tuple, or None"
msgstr ""

#: py/objstr.c
msgid "wrong number of arguments"
msgstr "numero erroneo de argumentos"

#: py/runtime.c
msgid "wrong number of values to unpack"
msgstr "numero erroneo de valores a descomprimir"

#: shared-module/displayio/Shape.c
#, fuzzy
msgid "x value out of bounds"
msgstr "address fuera de límites"

#: shared-bindings/displayio/Shape.c
msgid "y should be an int"
msgstr "y deberia ser un int"

#: shared-module/displayio/Shape.c
#, fuzzy
msgid "y value out of bounds"
msgstr "address fuera de límites"

#: py/objrange.c
msgid "zero step"
msgstr "paso cero"

#~ msgid "AP required"
#~ msgstr "AP requerido"

#~ msgid "Cannot connect to AP"
#~ msgstr "No se puede conectar a AP"

#~ msgid "Cannot disconnect from AP"
#~ msgstr "No se puede desconectar de AP"

#~ msgid "Cannot set STA config"
#~ msgstr "No se puede establecer STA config"

#~ msgid "Cannot update i/f status"
#~ msgstr "No se puede actualizar i/f status"

#~ msgid "Don't know how to pass object to native function"
#~ msgstr "No se sabe cómo pasar objeto a función nativa"

#~ msgid "ESP8226 does not support safe mode."
#~ msgstr "ESP8226 no soporta modo seguro."

#~ msgid "ESP8266 does not support pull down."
#~ msgstr "ESP8266 no soporta pull down."

#~ msgid "Error in ffi_prep_cif"
#~ msgstr "Error en ffi_prep_cif"

#, fuzzy
#~ msgid "Failed to notify or indicate attribute value, err %0x04x"
#~ msgstr "No se puede notificar el valor del anuncio. status: 0x%02x"

#, fuzzy
#~ msgid "Failed to read attribute value, err %0x04x"
#~ msgstr "No se puede leer el valor del atributo. status 0x%02x"

#~ msgid "Function requires lock."
#~ msgstr "La función requiere lock"

#~ msgid "GPIO16 does not support pull up."
#~ msgstr "GPIO16 no soporta pull up."

#~ msgid "Maximum PWM frequency is %dhz."
#~ msgstr "La frecuencia máxima del PWM es %dhz."

#~ msgid "Minimum PWM frequency is 1hz."
#~ msgstr "La frecuencia mínima del PWM es 1hz"

#~ msgid "Multiple PWM frequencies not supported. PWM already set to %dhz."
#~ msgstr ""
#~ "PWM de múltiples frecuencias no soportado. El PWM ya se estableció a %dhz"

#~ msgid "No PulseIn support for %q"
#~ msgstr "Sin soporte PulseIn para %q"

#~ msgid "No hardware support for analog out."
#~ msgstr "Sin soporte de hardware para analog out"

#~ msgid "Not connected."
#~ msgstr "No conectado."

#~ msgid "Only Windows format, uncompressed BMP supported %d"
#~ msgstr "Solo formato Windows, BMP sin comprimir soportado %d"

#~ msgid "Only bit maps of 8 bit color or less are supported"
#~ msgstr "Solo se admiten bit maps de color de 8 bits o menos"

#~ msgid "Only true color (24 bpp or higher) BMP supported %x"
#~ msgstr "Solo color verdadero (24 bpp o superior) BMP admitido %x"

#~ msgid "Only tx supported on UART1 (GPIO2)."
#~ msgstr "Solo tx soportada en UART1 (GPIO2)"

#~ msgid "PWM not supported on pin %d"
#~ msgstr "El pin %d no soporta PWM"

#~ msgid "Pin %q does not have ADC capabilities"
#~ msgstr "Pin %q no tiene capacidades de ADC"

#~ msgid "Pin(16) doesn't support pull"
#~ msgstr "Pin(16) no soporta para pull"

#~ msgid "Pins not valid for SPI"
#~ msgstr "Pines no válidos para SPI"

#~ msgid "STA must be active"
#~ msgstr "STA debe estar activo"

#~ msgid "STA required"
#~ msgstr "STA requerido"

#~ msgid "UART(%d) does not exist"
#~ msgstr "UART(%d) no existe"

#~ msgid "UART(1) can't read"
#~ msgstr "UART(1) no puede leer"

#~ msgid "Unable to remount filesystem"
#~ msgstr "Incapaz de montar de nuevo el sistema de archivos"

#~ msgid "Unknown type"
#~ msgstr "Tipo desconocido"

#~ msgid "Use esptool to erase flash and re-upload Python instead"
#~ msgstr ""
#~ "Usa esptool para borrar la flash y vuelve a cargar Python en su lugar"

#~ msgid "buffer too long"
#~ msgstr "buffer demasiado largo"

#~ msgid "can query only one param"
#~ msgstr "puede consultar solo un param"

#~ msgid "can't get AP config"
#~ msgstr "no se puede obtener AP config"

#~ msgid "can't get STA config"
#~ msgstr "no se puede obtener STA config"

#~ msgid "can't set AP config"
#~ msgstr "no se puede establecer AP config"

#~ msgid "can't set STA config"
#~ msgstr "no se puede establecer STA config"

#~ msgid "either pos or kw args are allowed"
#~ msgstr "ya sea pos o kw args son permitidos"

#~ msgid "expected a DigitalInOut"
#~ msgstr "se espera un DigitalInOut"

#~ msgid "expecting a pin"
#~ msgstr "esperando un pin"

#~ msgid "ffi_prep_closure_loc"
#~ msgstr "ffi_prep_closure_loc"

#~ msgid "flash location must be below 1MByte"
#~ msgstr "la ubicación de la flash debe estar debajo de 1MByte"

#~ msgid "frequency can only be either 80Mhz or 160MHz"
#~ msgstr "la frecuencia solo puede ser 80MHz o 160MHz"

#~ msgid "impossible baudrate"
#~ msgstr "baudrate imposible"

#~ msgid "invalid alarm"
#~ msgstr "alarma inválida"

#~ msgid "invalid buffer length"
#~ msgstr "longitud de buffer inválida"

#~ msgid "invalid data bits"
#~ msgstr "data bits inválidos"

#~ msgid "invalid pin"
#~ msgstr "pin inválido"

#~ msgid "invalid stop bits"
#~ msgstr "stop bits inválidos"

#~ msgid "len must be multiple of 4"
#~ msgstr "len debe de ser múltiple de 4"

#~ msgid "memory allocation failed, allocating %u bytes for native code"
#~ msgstr ""
#~ "falló la asignación de memoria, asignando %u bytes para código nativo"

#~ msgid "not a valid ADC Channel: %d"
#~ msgstr "no es un canal ADC válido: %d"

#~ msgid "pin does not have IRQ capabilities"
#~ msgstr "pin sin capacidades IRQ"

#~ msgid "position must be 2-tuple"
#~ msgstr "posición debe ser 2-tuple"

#~ msgid "row must be packed and word aligned"
#~ msgstr "la fila debe estar empacada y la palabra alineada"

#~ msgid "scan failed"
#~ msgstr "scan ha fallado"

#~ msgid "too many arguments"
#~ msgstr "muchos argumentos"

#~ msgid "unknown config param"
#~ msgstr "parámetro config desconocido"

#~ msgid "unknown status param"
#~ msgstr "status param desconocido"

#~ msgid "wifi_set_ip_info() failed"
#~ msgstr "wifi_set_ip_info() ha fallado"