/* * This file is part of the MicroPython project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2019 Dan Halbert for Adafruit Industries * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ // This file contains settings that are common across CircuitPython ports, to make // sure that the same feature set and settings are used, such as in atmel-samd // and nrf. #ifndef __INCLUDED_MPCONFIG_CIRCUITPY_H #define __INCLUDED_MPCONFIG_CIRCUITPY_H #include #include // This is CircuitPython. #define CIRCUITPY 1 // REPR_C encodes qstrs, 31-bit ints, and 30-bit floats in a single 32-bit word. #define MICROPY_OBJ_REPR (MICROPY_OBJ_REPR_C) // options to control how MicroPython is built // TODO(tannewt): Reduce this number if we want the REPL to function under 512 // free bytes. // #define MICROPY_ALLOC_PARSE_RULE_INIT (64) // Sorted alphabetically for easy finding. // // default is 128; consider raising to reduce fragmentation. #define MICROPY_ALLOC_PARSE_CHUNK_INIT (16) // default is 512. #define MICROPY_ALLOC_PATH_MAX (256) #define MICROPY_CAN_OVERRIDE_BUILTINS (1) #define MICROPY_COMP_CONST (1) #define MICROPY_COMP_DOUBLE_TUPLE_ASSIGN (1) #define MICROPY_COMP_MODULE_CONST (1) #define MICROPY_COMP_TRIPLE_TUPLE_ASSIGN (0) #define MICROPY_DEBUG_PRINTERS (0) #define MICROPY_EMIT_INLINE_THUMB (CIRCUITPY_ENABLE_MPY_NATIVE) #define MICROPY_EMIT_THUMB (CIRCUITPY_ENABLE_MPY_NATIVE) #define MICROPY_EMIT_X64 (0) #define MICROPY_ENABLE_DOC_STRING (0) #define MICROPY_ENABLE_FINALISER (1) #define MICROPY_ENABLE_GC (1) #define MICROPY_ENABLE_SOURCE_LINE (1) #define MICROPY_EPOCH_IS_1970 (1) #define MICROPY_ERROR_REPORTING (MICROPY_ERROR_REPORTING_NORMAL) #define MICROPY_FLOAT_HIGH_QUALITY_HASH (0) #define MICROPY_FLOAT_IMPL (MICROPY_FLOAT_IMPL_FLOAT) #define MICROPY_GC_ALLOC_THRESHOLD (0) #define MICROPY_HELPER_LEXER_UNIX (0) #define MICROPY_HELPER_REPL (1) #define MICROPY_KBD_EXCEPTION (1) #define MICROPY_MEM_STATS (0) #define MICROPY_MODULE_BUILTIN_INIT (1) #define MICROPY_NONSTANDARD_TYPECODES (0) #define MICROPY_OPT_COMPUTED_GOTO (1) #define MICROPY_OPT_COMPUTED_GOTO_SAVE_SPACE (CIRCUITPY_COMPUTED_GOTO_SAVE_SPACE) #define MICROPY_OPT_LOAD_ATTR_FAST_PATH (CIRCUITPY_OPT_LOAD_ATTR_FAST_PATH) #define MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE (CIRCUITPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE) #define MICROPY_PERSISTENT_CODE_LOAD (1) #define MICROPY_PY_ARRAY (1) #define MICROPY_PY_ARRAY_SLICE_ASSIGN (1) #define MICROPY_PY_ATTRTUPLE (1) #define MICROPY_PY_BUILTINS_BYTEARRAY (1) #define MICROPY_PY_BUILTINS_ENUMERATE (1) #define MICROPY_PY_BUILTINS_FILTER (1) #define MICROPY_PY_BUILTINS_HELP (1) #define MICROPY_PY_BUILTINS_HELP_MODULES (1) #define MICROPY_PY_BUILTINS_INPUT (1) #define MICROPY_PY_BUILTINS_MEMORYVIEW (1) #define MICROPY_PY_BUILTINS_MIN_MAX (1) #define MICROPY_PY_BUILTINS_PROPERTY (1) #define MICROPY_PY_BUILTINS_REVERSED (1) #define MICROPY_PY_BUILTINS_ROUND_INT (1) #define MICROPY_PY_BUILTINS_SET (1) #define MICROPY_PY_BUILTINS_SLICE (1) #define MICROPY_PY_BUILTINS_SLICE_ATTRS (1) #define MICROPY_PY_BUILTINS_SLICE_INDICES (1) #define MICROPY_PY_BUILTINS_STR_UNICODE (1) #define MICROPY_PY_CMATH (0) #define MICROPY_PY_COLLECTIONS (1) #define MICROPY_PY_DESCRIPTORS (1) #define MICROPY_PY_IO_FILEIO (1) #define MICROPY_PY_GC (1) // Supplanted by shared-bindings/math #define MICROPY_PY_MATH (0) #define MICROPY_PY_MICROPYTHON_MEM_INFO (0) // Supplanted by shared-bindings/struct #define MICROPY_PY_STRUCT (0) #define MICROPY_PY_SYS (1) #define MICROPY_PY_SYS_MAXSIZE (1) #define MICROPY_PY_SYS_STDFILES (1) // Supplanted by shared-bindings/random #define MICROPY_PY_URANDOM (0) #define MICROPY_PY_URANDOM_EXTRA_FUNCS (0) #define MICROPY_PY___FILE__ (1) #define MICROPY_QSTR_BYTES_IN_HASH (1) #define MICROPY_REPL_AUTO_INDENT (1) #define MICROPY_REPL_EVENT_DRIVEN (0) #define MICROPY_ENABLE_PYSTACK (1) #define MICROPY_STACK_CHECK (1) #define MICROPY_STREAMS_NON_BLOCK (1) #ifndef MICROPY_USE_INTERNAL_PRINTF #define MICROPY_USE_INTERNAL_PRINTF (1) #endif // fatfs configuration used in ffconf.h // // 1 = SFN/ANSI 437=LFN/U.S.(OEM) #define MICROPY_FATFS_ENABLE_LFN (1) // Code page is ignored because unicode is enabled. // Don't use parens on the value below because it gets combined with a prefix in // the preprocessor. #define MICROPY_FATFS_LFN_CODE_PAGE 437 #define MICROPY_FATFS_USE_LABEL (1) #define MICROPY_FATFS_RPATH (2) #define MICROPY_FATFS_MULTI_PARTITION (1) #define MICROPY_FATFS_LFN_UNICODE 2 // UTF-8 // Only enable this if you really need it. It allocates a byte cache of this size. // #define MICROPY_FATFS_MAX_SS (4096) #define FILESYSTEM_BLOCK_SIZE (512) #define MICROPY_VFS (1) #define MICROPY_VFS_FAT (MICROPY_VFS) #define MICROPY_READER_VFS (MICROPY_VFS) // type definitions for the specific machine #define BYTES_PER_WORD (4) #define MICROPY_MAKE_POINTER_CALLABLE(p) ((void *)((mp_uint_t)(p) | 1)) // Track stack usage. Expose results via ustack module. #define MICROPY_MAX_STACK_USAGE (0) // This port is intended to be 32-bit, but unfortunately, int32_t for // different targets may be defined in different ways - either as int // or as long. This requires different printf formatting specifiers // to print such value. So, we avoid int32_t and use int directly. #define UINT_FMT "%u" #define INT_FMT "%d" typedef int mp_int_t; // must be pointer size typedef unsigned mp_uint_t; // must be pointer size typedef long mp_off_t; #define MP_PLAT_PRINT_STRN(str, len) mp_hal_stdout_tx_strn_cooked(str, len) #define mp_type_fileio mp_type_vfs_fat_fileio #define mp_type_textio mp_type_vfs_fat_textio #define mp_import_stat mp_vfs_import_stat #define mp_builtin_open_obj mp_vfs_open_obj // extra built in names to add to the global namespace #define MICROPY_PORT_BUILTINS \ { MP_OBJ_NEW_QSTR(MP_QSTR_help), (mp_obj_t)&mp_builtin_help_obj }, \ { MP_OBJ_NEW_QSTR(MP_QSTR_input), (mp_obj_t)&mp_builtin_input_obj }, \ { MP_OBJ_NEW_QSTR(MP_QSTR_open), (mp_obj_t)&mp_builtin_open_obj }, ////////////////////////////////////////////////////////////////////////////////////////////////// // board-specific definitions, which control and may override definitions below. #include "mpconfigboard.h" // Turning off FULL_BUILD removes some functionality to reduce flash size on tiny SAMD21s #define MICROPY_BUILTIN_METHOD_CHECK_SELF_ARG (CIRCUITPY_FULL_BUILD) #ifndef MICROPY_CPYTHON_COMPAT #define MICROPY_CPYTHON_COMPAT (CIRCUITPY_FULL_BUILD) #endif #define MICROPY_PY_BUILTINS_POW3 (CIRCUITPY_BUILTINS_POW3) #define MICROPY_PY_FSTRINGS (MICROPY_CPYTHON_COMPAT) #define MICROPY_MODULE_WEAK_LINKS (0) #define MICROPY_PY_ALL_SPECIAL_METHODS (CIRCUITPY_FULL_BUILD) #ifndef MICROPY_PY_BUILTINS_COMPLEX #define MICROPY_PY_BUILTINS_COMPLEX (CIRCUITPY_FULL_BUILD) #endif #define MICROPY_PY_BUILTINS_FROZENSET (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_STR_CENTER (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_STR_PARTITION (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_STR_SPLITLINES (CIRCUITPY_FULL_BUILD) #ifndef MICROPY_PY_COLLECTIONS_ORDEREDDICT #define MICROPY_PY_COLLECTIONS_ORDEREDDICT (CIRCUITPY_FULL_BUILD) #endif #define MICROPY_PY_URE_MATCH_GROUPS (CIRCUITPY_RE) #define MICROPY_PY_URE_MATCH_SPAN_START_END (CIRCUITPY_RE) #define MICROPY_PY_URE_SUB (CIRCUITPY_RE) #define CIRCUITPY_MICROPYTHON_ADVANCED (CIRCUITPY_FULL_BUILD) #ifndef MICROPY_FATFS_EXFAT #define MICROPY_FATFS_EXFAT (CIRCUITPY_FULL_BUILD) #endif // LONGINT_IMPL_xxx are defined in the Makefile. // #ifdef LONGINT_IMPL_NONE #define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_NONE) #endif #ifdef LONGINT_IMPL_MPZ #define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_MPZ) #define MP_SSIZE_MAX (0x7fffffff) #endif #ifdef LONGINT_IMPL_LONGLONG #define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_LONGLONG) #define MP_SSIZE_MAX (0x7fffffff) #endif #ifndef MICROPY_PY_REVERSE_SPECIAL_METHODS #define MICROPY_PY_REVERSE_SPECIAL_METHODS (CIRCUITPY_ULAB || CIRCUITPY_FULL_BUILD) #endif #if INTERNAL_FLASH_FILESYSTEM == 0 && QSPI_FLASH_FILESYSTEM == 0 && SPI_FLASH_FILESYSTEM == 0 && !DISABLE_FILESYSTEM #error No *_FLASH_FILESYSTEM set! #endif // These CIRCUITPY_xxx values should all be defined in the *.mk files as being on or off. // So if any are not defined in *.mk, they'll throw an error here. #if CIRCUITPY_BOARD #define BOARD_I2C (defined(DEFAULT_I2C_BUS_SDA) && defined(DEFAULT_I2C_BUS_SCL)) #define BOARD_SPI (defined(DEFAULT_SPI_BUS_SCK) && defined(DEFAULT_SPI_BUS_MISO) && defined(DEFAULT_SPI_BUS_MOSI)) #define BOARD_UART (defined(DEFAULT_UART_BUS_RX) && defined(DEFAULT_UART_BUS_TX)) // I2C and SPI are always allocated off the heap. #if BOARD_UART #define BOARD_UART_ROOT_POINTER mp_obj_t shared_uart_bus; #else #define BOARD_UART_ROOT_POINTER #endif #else #define BOARD_UART_ROOT_POINTER #endif #if CIRCUITPY_DISPLAYIO #ifndef CIRCUITPY_DISPLAY_LIMIT #define CIRCUITPY_DISPLAY_LIMIT (1) #endif #else #define CIRCUITPY_DISPLAY_LIMIT (0) #endif #if CIRCUITPY_GAMEPADSHIFT // Scan gamepad every 32ms #define CIRCUITPY_GAMEPAD_TICKS 0x1f #define GAMEPAD_ROOT_POINTERS mp_obj_t gamepad_singleton; #else #define GAMEPAD_ROOT_POINTERS #endif #if CIRCUITPY_KEYPAD #define KEYPAD_ROOT_POINTERS mp_obj_t keypad_scanners_linked_list; #else #define KEYPAD_ROOT_POINTERS #endif #if CIRCUITPY_MEMORYMONITOR #define MEMORYMONITOR_ROOT_POINTERS mp_obj_t active_allocationsizes; \ mp_obj_t active_allocationalarms; #else #define MEMORYMONITOR_ROOT_POINTERS #endif // This is not a top-level module; it's microcontroller.nvm. #if CIRCUITPY_NVM extern const struct _mp_obj_module_t nvm_module; #endif // Following modules are implemented in either extmod or py directory. #define MICROPY_PY_UBINASCII CIRCUITPY_BINASCII #define MICROPY_PY_UERRNO CIRCUITPY_ERRNO // Uses about 80 bytes. #define MICROPY_PY_UERRNO_ERRORCODE CIRCUITPY_ERRNO #define MICROPY_PY_URE CIRCUITPY_RE #if CIRCUITPY_JSON #define MICROPY_PY_UJSON (1) #define MICROPY_PY_IO (1) #else #ifndef MICROPY_PY_IO // We don't need MICROPY_PY_IO unless someone else wants it. #define MICROPY_PY_IO (0) #endif #endif #if CIRCUITPY_ULAB // ulab requires reverse special methods #if defined(MICROPY_PY_REVERSE_SPECIAL_METHODS) && !MICROPY_PY_REVERSE_SPECIAL_METHODS #error "ulab requires MICROPY_PY_REVERSE_SPECIAL_METHODS" #endif #endif // Define certain native modules with weak links so they can be replaced with Python // implementations. This list may grow over time. #define MICROPY_PORT_BUILTIN_MODULE_WEAK_LINKS // Native modules that are weak links can be accessed directly // by prepending their name with an underscore. This list should correspond to // MICROPY_PORT_BUILTIN_MODULE_WEAK_LINKS, assuming you want the native modules // to be accessible when overriden. #define MICROPY_PORT_BUILTIN_MODULE_ALT_NAMES // This is an inclusive list that should correspond to the CIRCUITPY_XXX list above, // including dependencies. // Some of these definitions will be blank depending on what is turned on and off. // Some are omitted because they're in MICROPY_PORT_BUILTIN_MODULE_WEAK_LINKS above. #define MICROPY_PORT_BUILTIN_MODULES_STRONG_LINKS // The following modules are defined in their respective __init__.c file in the // shared-bindings directory using MP_REGISTER_MODULE. // // CIRCUITPY_AESIO // CIRCUITPY_ANALOGIO // CIRCUITPY_ATEXIT // CIRCUITPY_AUDIOBUSIO // CIRCUITPY_AUDIOCORE // CIRCUITPY_AUDIOIO // CIRCUITPY_AUDIOMIXER // CIRCUITPY_AUDIOMP3 // CIRCUITPY_AUDIOPWMIO // CIRCUITPY_BITBANGIO // CIRCUITPY_BITMAPTOOLS // CIRCUITPY_BITOPS // CIRCUITPY_BLEIO // CIRCUITPY_BOARD // CIRCUITPY_BUSDEVICE // CIRCUITPY_BUSIO // CIRCUITPY_CAMERA // CIRCUITPY_CANIO // CIRCUITPY_COUNTIO // CIRCUITPY_DIGITALIO // CIRCUITPY_DISPLAYIO // CIRCUITPY_DUALBANK // CIRCUITPY__EVE // CIRCUITPY_FONTIO // CIRCUITPY_FRAMEBUFFERIO // CIRCUITPY_FREQUENCYIO // CIRCUITPY_GAMEPADSHIFT // CIRCUITPY_GETPASS // CIRCUITPY_GNSS // CIRCUITPY_I2CPERIPHERAL // CIRCUITPY_IMAGECAPTURE // CIRCUITPY_IPADDRESS // CIRCUITPY_KEYPAD // CIRCUITPY_MATH // CIRCUITPY_MEMORYMONITOR // CIRCUITPY_MICROCONTROLLER // CIRCUITPY_MSGPACK // CIRCUITPY_NEOPIXEL_WRITE // CIRCUITPY_ONEWIREIO_WRITE // CIRCUITPY_PARALLELDISPLAY // CIRCUITPY_PEW // CIRCUITPY_PIXELBUF // CIRCUITPY_PS2IO // CIRCUITPY_PULSEIO // CIRCUITPY_PWMIO // CIRCUITPY_QRIO // CIRCUITPY_RAINBOWIO // CIRCUITPY_RANDOM // CIRCUITPY_RGBMATRIX // CIRCUITPY_ROTARYIO // CIRCUITPY_RTC // CIRCUITPY_SDCARDIO // CIRCUITPY_SDIOIO // CIRCUITPY_SHARPDISPLAY // CIRCUITPY_SOCKETPOOL // CIRCUITPY_SSL // CIRCUITPY_STAGE // CIRCUITPY_STORAGE // CIRCUITPY_STRUCT // CIRCUITPY_SUPERVISOR // CIRCUITPY_SYNTHIO // CIRCUITPY_TERMINALIO // CIRCUITPY_TOUCHIO // CIRCUITPY_TRACEBACK // CIRCUITPY_UHEAP // CIRCUITPY_USB_CDC // CIRCUITPY_USB_HID // CIRCUITPY_USB_MIDI // CIRCUITPY_USTACK // CIRCUITPY_VECTORIO // CIRCUITPY_WATCHDOG // CIRCUITPY_WIFI // If weak links are enabled, just include strong links in the main list of modules, // and also include the underscore alternate names. #if MICROPY_MODULE_WEAK_LINKS #define MICROPY_PORT_BUILTIN_MODULES \ MICROPY_PORT_BUILTIN_MODULES_STRONG_LINKS \ MICROPY_PORT_BUILTIN_MODULE_ALT_NAMES #else // If weak links are disabled, included both strong and potentially weak lines #define MICROPY_PORT_BUILTIN_MODULES \ MICROPY_PORT_BUILTIN_MODULES_STRONG_LINKS \ MICROPY_PORT_BUILTIN_MODULE_WEAK_LINKS #endif // We need to provide a declaration/definition of alloca() #include #define MP_STATE_PORT MP_STATE_VM #include "supervisor/flash_root_pointers.h" // From supervisor/memory.c struct _supervisor_allocation_node; #define CIRCUITPY_COMMON_ROOT_POINTERS \ FLASH_ROOT_POINTERS \ KEYPAD_ROOT_POINTERS \ GAMEPAD_ROOT_POINTERS \ BOARD_UART_ROOT_POINTER \ MEMORYMONITOR_ROOT_POINTERS \ vstr_t *repl_line; \ mp_obj_t pew_singleton; \ mp_obj_t rtc_time_source; \ const char *readline_hist[8]; \ struct _supervisor_allocation_node *first_embedded_allocation; \ void supervisor_run_background_tasks_if_tick(void); #define RUN_BACKGROUND_TASKS (supervisor_run_background_tasks_if_tick()) #define MICROPY_VM_HOOK_LOOP RUN_BACKGROUND_TASKS; #define MICROPY_VM_HOOK_RETURN RUN_BACKGROUND_TASKS; // CIRCUITPY_AUTORELOAD_DELAY_MS = 0 will completely disable autoreload. #ifndef CIRCUITPY_AUTORELOAD_DELAY_MS #define CIRCUITPY_AUTORELOAD_DELAY_MS 500 #endif #ifndef CIRCUITPY_FILESYSTEM_FLUSH_INTERVAL_MS #define CIRCUITPY_FILESYSTEM_FLUSH_INTERVAL_MS 1000 #endif #ifndef CIRCUITPY_PYSTACK_SIZE #define CIRCUITPY_PYSTACK_SIZE 1536 #endif // Wait this long imediately after startup to see if we are connected to USB. #ifndef CIRCUITPY_USB_CONNECTED_SLEEP_DELAY #define CIRCUITPY_USB_CONNECTED_SLEEP_DELAY 5 #endif #ifndef CIRCUITPY_PROCESSOR_COUNT #define CIRCUITPY_PROCESSOR_COUNT (1) #endif #ifndef CIRCUITPY_STATUS_LED_POWER_INVERTED #define CIRCUITPY_STATUS_LED_POWER_INVERTED (0) #endif #define CIRCUITPY_BOOT_OUTPUT_FILE "/boot_out.txt" #ifndef CIRCUITPY_BOOT_COUNTER #define CIRCUITPY_BOOT_COUNTER 0 #endif #if !defined(CIRCUITPY_INTERNAL_NVM_SIZE) && CIRCUITPY_BOOT_COUNTER != 0 #error "boot counter requires CIRCUITPY_NVM enabled" #endif #define CIRCUITPY_VERBOSE_BLE 0 // This trades ~1k flash space (1) for that much in RAM plus the cost to compute // the values once on init (0). Only turn it off, when you really need the flash // space and are willing to trade the RAM. #ifndef CIRCUITPY_PRECOMPUTE_QSTR_ATTR #define CIRCUITPY_PRECOMPUTE_QSTR_ATTR (1) #endif // USB settings // If the port requires certain USB endpoint numbers, define these in mpconfigport.h. #ifndef USB_CDC_EP_NUM_NOTIFICATION #define USB_CDC_EP_NUM_NOTIFICATION (0) #endif #ifndef USB_CDC_EP_NUM_DATA_OUT #define USB_CDC_EP_NUM_DATA_OUT (0) #endif #ifndef USB_CDC_EP_NUM_DATA_IN #define USB_CDC_EP_NUM_DATA_IN (0) #endif #ifndef USB_CDC2_EP_NUM_NOTIFICATION #define USB_CDC2_EP_NUM_NOTIFICATION (0) #endif #ifndef USB_CDC2_EP_NUM_DATA_OUT #define USB_CDC2_EP_NUM_DATA_OUT (0) #endif #ifndef USB_CDC2_EP_NUM_DATA_IN #define USB_CDC2_EP_NUM_DATA_IN (0) #endif #ifndef USB_MSC_EP_NUM_OUT #define USB_MSC_EP_NUM_OUT (0) #endif #ifndef USB_MSC_EP_NUM_IN #define USB_MSC_EP_NUM_IN (0) #endif #ifndef USB_HID_EP_NUM_OUT #define USB_HID_EP_NUM_OUT (0) #endif #ifndef USB_HID_EP_NUM_IN #define USB_HID_EP_NUM_IN (0) #endif // The most complicated device currently known of is the head and eye tracker, which requires 5 // report ids. // https://usb.org/sites/default/files/hutrr74_-_usage_page_for_head_and_eye_trackers_0.pdf // The default descriptors only use 1, so that is the minimum. #ifndef CIRCUITPY_USB_HID_MAX_REPORT_IDS_PER_DESCRIPTOR #define CIRCUITPY_USB_HID_MAX_REPORT_IDS_PER_DESCRIPTOR (6) #elif CIRCUITPY_USB_HID_MAX_REPORT_IDS_PER_DESCRIPTOR < 1 #error "CIRCUITPY_USB_HID_MAX_REPORT_IDS_PER_DESCRIPTOR must be at least 1" #endif #ifndef USB_MIDI_EP_NUM_OUT #define USB_MIDI_EP_NUM_OUT (0) #endif #ifndef USB_MIDI_EP_NUM_IN #define USB_MIDI_EP_NUM_IN (0) #endif #endif // __INCLUDED_MPCONFIG_CIRCUITPY_H