#include "nrf52_ble.h" #include "nrf52_board.h" #include "sdk_config.h" #include "app_error.h" #include "app_fifo.h" #include "app_timer.h" #include "ble_advertising.h" #include "ble_conn_params.h" #include "ble_conn_state.h" #include "ble_hci.h" #include "ble_nus.h" #include "ble_srv_common.h" #include "fds.h" #include "fstorage.h" #include "peer_manager.h" #include "softdevice_handler.h" #define CENTRAL_LINK_COUNT 0 /**< Number of central links used by the application. When changing this number remember to adjust the RAM settings*/ #define PERIPHERAL_LINK_COUNT 1 /**< Number of peripheral links used by the application. When changing this number remember to adjust the RAM settings*/ #define DEVICE_NAME "micropython" #define MIN_CONN_INTERVAL MSEC_TO_UNITS(20, UNIT_1_25_MS) /**< Minimum acceptable connection interval (0.02 seconds). */ #define MAX_CONN_INTERVAL MSEC_TO_UNITS(200, UNIT_1_25_MS) /**< Maximum acceptable connection interval (0.2 second). */ #define SLAVE_LATENCY 0 /**< Slave latency. */ #define CONN_SUP_TIMEOUT MSEC_TO_UNITS(3000, UNIT_10_MS) /**< Connection supervisory timeout (3 seconds). */ #define APP_ADV_INTERVAL MSEC_TO_UNITS(25, UNIT_0_625_MS) #define APP_ADV_TIMEOUT_IN_SECONDS 180 #define APP_TIMER_PRESCALER 0 /**< Value of the RTC1 PRESCALER register. */ #define APP_TIMER_OP_QUEUE_SIZE 4 /**< Size of timer operation queues. */ #define FIRST_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(5000, APP_TIMER_PRESCALER) /**< Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (5 seconds). */ #define NEXT_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(30000, APP_TIMER_PRESCALER) /**< Time between each call to sd_ble_gap_conn_param_update after the first call (30 seconds). */ #define MAX_CONN_PARAMS_UPDATE_COUNT 3 #define SEC_PARAM_BOND 1 /**< Perform bonding. */ #define SEC_PARAM_MITM 0 /**< Man In The Middle protection not required. */ #define SEC_PARAM_LESC 0 /**< LE Secure Connections not enabled. */ #define SEC_PARAM_KEYPRESS 0 /**< Keypress notifications not enabled. */ #define SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_NONE /**< No I/O capabilities. */ #define SEC_PARAM_OOB 0 /**< Out Of Band data not available. */ #define SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */ #define SEC_PARAM_MAX_KEY_SIZE 16 /**< Maximum encryption key size. */ #define NUS_RX_FIFO_BUFFER_SIZE 64 static ble_uuid_t m_adv_uuids[] = {{BLE_UUID_NUS_SERVICE, 0}}; /**< Universally unique service identifiers. */ static ble_nus_t m_nus; static app_fifo_t m_nus_rx_fifo; static uint8_t m_nus_rx_fifo_buffer[NUS_RX_FIFO_BUFFER_SIZE]; static void ble_evt_dispatch(ble_evt_t * p_ble_evt) { ble_conn_state_on_ble_evt(p_ble_evt); pm_on_ble_evt(p_ble_evt); ble_conn_params_on_ble_evt(p_ble_evt); ble_advertising_on_ble_evt(p_ble_evt); ble_nus_on_ble_evt(&m_nus, p_ble_evt); } static void sys_evt_dispatch(uint32_t sys_evt) { fs_sys_event_handler(sys_evt); ble_advertising_on_sys_evt(sys_evt); } static void ble_stack_init(void) { nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC; // Initialize the SoftDevice handler module. SOFTDEVICE_HANDLER_INIT(&clock_lf_cfg, NULL); ble_enable_params_t ble_enable_params; uint32_t err_code = softdevice_enable_get_default_config(CENTRAL_LINK_COUNT, PERIPHERAL_LINK_COUNT, &ble_enable_params); APP_ERROR_CHECK(err_code); //Check the ram settings against the used number of links CHECK_RAM_START_ADDR(CENTRAL_LINK_COUNT, PERIPHERAL_LINK_COUNT); // Enable BLE stack. err_code = softdevice_enable(&ble_enable_params); APP_ERROR_CHECK(err_code); // Register with the SoftDevice handler module for BLE events. err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch); APP_ERROR_CHECK(err_code); // Register with the SoftDevice handler module for BLE events. err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch); APP_ERROR_CHECK(err_code); } /**@brief Function for the GAP initialization. * * @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the * device including the device name, appearance, and the preferred connection parameters. */ static void gap_params_init(void) { uint32_t err_code; ble_gap_conn_params_t gap_conn_params; ble_gap_conn_sec_mode_t sec_mode; BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode); err_code = sd_ble_gap_device_name_set(&sec_mode, (const uint8_t *)DEVICE_NAME, strlen(DEVICE_NAME)); APP_ERROR_CHECK(err_code); err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_UNKNOWN); APP_ERROR_CHECK(err_code); memset(&gap_conn_params, 0, sizeof(gap_conn_params)); gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL; gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL; gap_conn_params.slave_latency = SLAVE_LATENCY; gap_conn_params.conn_sup_timeout = CONN_SUP_TIMEOUT; err_code = sd_ble_gap_ppcp_set(&gap_conn_params); APP_ERROR_CHECK(err_code); } /**@brief Function for handling advertising events. * * @details This function will be called for advertising events which are passed to the application. * * @param[in] ble_adv_evt Advertising event. */ static void on_adv_evt(ble_adv_evt_t ble_adv_evt) { switch (ble_adv_evt) { case BLE_ADV_EVT_FAST: break; case BLE_ADV_EVT_IDLE: break; default: break; } } /**@brief Function for initializing the Advertising functionality. */ static void advertising_init(void) { uint32_t err_code; ble_advdata_t advdata; // Build advertising data struct to pass into @ref ble_advertising_init. memset(&advdata, 0, sizeof(advdata)); advdata.name_type = BLE_ADVDATA_FULL_NAME; advdata.include_appearance = true; advdata.flags = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE; advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]); advdata.uuids_complete.p_uuids = m_adv_uuids; ble_adv_modes_config_t options = {0}; options.ble_adv_fast_enabled = true; options.ble_adv_fast_interval = APP_ADV_INTERVAL; options.ble_adv_fast_timeout = APP_ADV_TIMEOUT_IN_SECONDS; err_code = ble_advertising_init(&advdata, NULL, &options, on_adv_evt, NULL); APP_ERROR_CHECK(err_code); } static void nus_data_handler(ble_nus_t * p_nus, uint8_t * p_data, uint16_t length) { for (uint32_t i = 0; i < length; i++) { // XXX app_fifo_put(&m_nus_rx_fifo, p_data[i]); } } static void services_init(void) { uint32_t err_code; ble_nus_init_t nus_init = {0}; nus_init.data_handler = nus_data_handler; err_code = ble_nus_init(&m_nus, &nus_init); APP_ERROR_CHECK(err_code); m_adv_uuids[0].type = m_nus.uuid_type; err_code = app_fifo_init(&m_nus_rx_fifo, m_nus_rx_fifo_buffer, NUS_RX_FIFO_BUFFER_SIZE); APP_ERROR_CHECK(err_code); } /**@brief Function for handling a Connection Parameters error. * * @param[in] nrf_error Error code containing information about what went wrong. */ static void conn_params_error_handler(uint32_t nrf_error) { APP_ERROR_HANDLER(nrf_error); } /**@brief Function for initializing the Connection Parameters module. */ static void conn_params_init(void) { uint32_t err_code; ble_conn_params_init_t cp_init; memset(&cp_init, 0, sizeof(cp_init)); cp_init.p_conn_params = NULL; cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY; cp_init.next_conn_params_update_delay = NEXT_CONN_PARAMS_UPDATE_DELAY; cp_init.max_conn_params_update_count = MAX_CONN_PARAMS_UPDATE_COUNT; cp_init.start_on_notify_cccd_handle = BLE_GATT_HANDLE_INVALID; cp_init.disconnect_on_fail = true; cp_init.evt_handler = NULL; cp_init.error_handler = conn_params_error_handler; err_code = ble_conn_params_init(&cp_init); APP_ERROR_CHECK(err_code); } /**@brief Function for starting advertising. */ static void advertising_start(void) { uint32_t err_code = ble_advertising_start(BLE_ADV_MODE_FAST); APP_ERROR_CHECK(err_code); } /**@brief Function for handling Peer Manager events. * * @param[in] p_evt Peer Manager event. */ static void pm_evt_handler(pm_evt_t const * p_evt) { ret_code_t err_code; switch(p_evt->evt_id) { case PM_EVT_BONDED_PEER_CONNECTED: err_code = pm_peer_rank_highest(p_evt->peer_id); if (err_code != NRF_ERROR_BUSY) { APP_ERROR_CHECK(err_code); } break;//PM_EVT_BONDED_PEER_CONNECTED case PM_EVT_CONN_SEC_START: break;//PM_EVT_CONN_SEC_START case PM_EVT_CONN_SEC_SUCCEEDED: { /* NRF_LOG_PRINTF_DEBUG("Link secured. Role: %d. conn_handle: %d, Procedure: %d\r\n", ble_conn_state_role(p_evt->conn_handle), p_evt->conn_handle, p_evt->params.conn_sec_succeeded.procedure); */ err_code = pm_peer_rank_highest(p_evt->peer_id); if (err_code != NRF_ERROR_BUSY) { APP_ERROR_CHECK(err_code); } } break;//PM_EVT_CONN_SEC_SUCCEEDED case PM_EVT_CONN_SEC_FAILED: { /** In some cases, when securing fails, it can be restarted directly. Sometimes it can * be restarted, but only after changing some Security Parameters. Sometimes, it cannot * be restarted until the link is disconnected and reconnected. Sometimes it is * impossible, to secure the link, or the peer device does not support it. How to * handle this error is highly application dependent. */ switch (p_evt->params.conn_sec_failed.error) { case PM_CONN_SEC_ERROR_PIN_OR_KEY_MISSING: // Rebond if one party has lost its keys. err_code = pm_conn_secure(p_evt->conn_handle, true); if (err_code != NRF_ERROR_INVALID_STATE) { APP_ERROR_CHECK(err_code); } break;//PM_CONN_SEC_ERROR_PIN_OR_KEY_MISSING default: break; } } break;//PM_EVT_CONN_SEC_FAILED case PM_EVT_CONN_SEC_CONFIG_REQ: { // Reject pairing request from an already bonded peer. pm_conn_sec_config_t conn_sec_config = {.allow_repairing = false}; pm_conn_sec_config_reply(p_evt->conn_handle, &conn_sec_config); } break;//PM_EVT_CONN_SEC_CONFIG_REQ case PM_EVT_STORAGE_FULL: { // Run garbage collection on the flash. err_code = fds_gc(); if (err_code == FDS_ERR_BUSY || err_code == FDS_ERR_NO_SPACE_IN_QUEUES) { // Retry. } else { APP_ERROR_CHECK(err_code); } } break;//PM_EVT_STORAGE_FULL case PM_EVT_ERROR_UNEXPECTED: // Assert. APP_ERROR_CHECK(p_evt->params.error_unexpected.error); break;//PM_EVT_ERROR_UNEXPECTED case PM_EVT_PEER_DATA_UPDATE_SUCCEEDED: break;//PM_EVT_PEER_DATA_UPDATE_SUCCEEDED case PM_EVT_PEER_DATA_UPDATE_FAILED: // Assert. APP_ERROR_CHECK_BOOL(false); break;//PM_EVT_PEER_DATA_UPDATE_FAILED case PM_EVT_PEER_DELETE_SUCCEEDED: break;//PM_EVT_PEER_DELETE_SUCCEEDED case PM_EVT_PEER_DELETE_FAILED: // Assert. APP_ERROR_CHECK(p_evt->params.peer_delete_failed.error); break;//PM_EVT_PEER_DELETE_FAILED case PM_EVT_PEERS_DELETE_SUCCEEDED: advertising_start(); break;//PM_EVT_PEERS_DELETE_SUCCEEDED case PM_EVT_PEERS_DELETE_FAILED: // Assert. APP_ERROR_CHECK(p_evt->params.peers_delete_failed_evt.error); break;//PM_EVT_PEERS_DELETE_FAILED case PM_EVT_LOCAL_DB_CACHE_APPLIED: break;//PM_EVT_LOCAL_DB_CACHE_APPLIED case PM_EVT_LOCAL_DB_CACHE_APPLY_FAILED: // The local database has likely changed, send service changed indications. pm_local_database_has_changed(); break;//PM_EVT_LOCAL_DB_CACHE_APPLY_FAILED case PM_EVT_SERVICE_CHANGED_IND_SENT: break;//PM_EVT_SERVICE_CHANGED_IND_SENT case PM_EVT_SERVICE_CHANGED_IND_CONFIRMED: break;//PM_EVT_SERVICE_CHANGED_IND_CONFIRMED default: // No implementation needed. break; } } static void peer_manager_init(bool erase_bonds) { ble_gap_sec_params_t sec_param; ret_code_t err_code; err_code = pm_init(); APP_ERROR_CHECK(err_code); if (erase_bonds) { err_code = pm_peers_delete(); APP_ERROR_CHECK(err_code); } memset(&sec_param, 0, sizeof(ble_gap_sec_params_t)); // Security parameters to be used for all security procedures. sec_param.bond = SEC_PARAM_BOND; sec_param.mitm = SEC_PARAM_MITM; sec_param.lesc = SEC_PARAM_LESC; sec_param.keypress = SEC_PARAM_KEYPRESS; sec_param.io_caps = SEC_PARAM_IO_CAPABILITIES; sec_param.oob = SEC_PARAM_OOB; sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE; sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE; sec_param.kdist_own.enc = 1; sec_param.kdist_own.id = 1; sec_param.kdist_peer.enc = 1; sec_param.kdist_peer.id = 1; err_code = pm_sec_params_set(&sec_param); APP_ERROR_CHECK(err_code); err_code = pm_register(pm_evt_handler); APP_ERROR_CHECK(err_code); } static void timers_init() { APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_OP_QUEUE_SIZE, false); } void nrf52_ble_init(void) { fds_init(); fs_init(); timers_init(); ble_stack_init(); ble_conn_state_init(); peer_manager_init(false); gap_params_init(); services_init(); advertising_init(); conn_params_init(); (void)ble_advertising_start(BLE_ADV_MODE_FAST); } static void power_manage() { uint32_t err_code = sd_app_evt_wait(); APP_ERROR_CHECK(err_code); } // ########################### MP IO functions ########################### void mp_hal_stdout_tx_strn(const char *str, size_t len) { uint32_t err_code; uint8_t *buf = (uint8_t *)str; size_t send_len; while (len > 0) { if (len >= BLE_NUS_MAX_DATA_LEN) send_len = BLE_NUS_MAX_DATA_LEN; else send_len = len; err_code = ble_nus_string_send(&m_nus, buf, send_len); if (err_code == NRF_SUCCESS) { len -= send_len; buf += send_len; } else if (err_code != NRF_ERROR_INVALID_STATE) { APP_ERROR_CHECK(err_code); } } } int mp_hal_stdin_rx_chr() { uint8_t byte; for (;;) { if (app_fifo_get(&m_nus_rx_fifo, &byte) == NRF_SUCCESS) { return byte; } power_manage(); } }