/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2016, 2017 Scott Shawcroft for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include "supervisor/spi_flash_api.h"

#include <stdint.h>
#include <string.h>

#include "mpconfigboard.h" // for EXTERNAL_FLASH_QSPI_DUAL

#include "supervisor/shared/external_flash/common_commands.h"
#include "supervisor/shared/external_flash/qspi_flash.h"
#include "samd/cache.h"
#include "samd/dma.h"

#include "atmel_start_pins.h"
#include "hal_gpio.h"

bool spi_flash_command(uint8_t command) {
    QSPI->INSTRCTRL.bit.INSTR = command;

    QSPI->INSTRFRAME.reg = QSPI_INSTRFRAME_WIDTH_SINGLE_BIT_SPI |
                           QSPI_INSTRFRAME_ADDRLEN_24BITS |
                           QSPI_INSTRFRAME_TFRTYPE_READ |
                           QSPI_INSTRFRAME_INSTREN;

    QSPI->CTRLA.reg = QSPI_CTRLA_ENABLE | QSPI_CTRLA_LASTXFER;

    while( !QSPI->INTFLAG.bit.INSTREND );

    QSPI->INTFLAG.reg = QSPI_INTFLAG_INSTREND;

    return true;
}

bool spi_flash_read_command(uint8_t command, uint8_t* response, uint32_t length) {
    samd_peripherals_disable_and_clear_cache();

    QSPI->INSTRCTRL.bit.INSTR = command;

    QSPI->INSTRFRAME.reg = QSPI_INSTRFRAME_WIDTH_SINGLE_BIT_SPI |
                           QSPI_INSTRFRAME_ADDRLEN_24BITS |
                           QSPI_INSTRFRAME_TFRTYPE_READ |
                           QSPI_INSTRFRAME_INSTREN |
                           QSPI_INSTRFRAME_DATAEN;

    // Dummy read of INSTRFRAME needed to synchronize.
    // See Instruction Transmission Flow Diagram, figure 37.9, page 995
    // and Example 4, page 998, section 37.6.8.5.
    (volatile uint32_t) QSPI->INSTRFRAME.reg;

    memcpy(response, (uint8_t *) QSPI_AHB, length);

    QSPI->CTRLA.reg = QSPI_CTRLA_ENABLE | QSPI_CTRLA_LASTXFER;

    while( !QSPI->INTFLAG.bit.INSTREND );

    QSPI->INTFLAG.reg = QSPI_INTFLAG_INSTREND;

    samd_peripherals_enable_cache();

    return true;
}

bool spi_flash_write_command(uint8_t command, uint8_t* data, uint32_t length) {
    samd_peripherals_disable_and_clear_cache();

    QSPI->INSTRCTRL.bit.INSTR = command;

    QSPI->INSTRFRAME.reg = QSPI_INSTRFRAME_WIDTH_SINGLE_BIT_SPI |
                           QSPI_INSTRFRAME_ADDRLEN_24BITS |
                           QSPI_INSTRFRAME_TFRTYPE_WRITE |
                           QSPI_INSTRFRAME_INSTREN |
                           (data != NULL ? QSPI_INSTRFRAME_DATAEN : 0);

    // Dummy read of INSTRFRAME needed to synchronize.
    // See Instruction Transmission Flow Diagram, figure 37.9, page 995
    // and Example 4, page 998, section 37.6.8.5.
    (volatile uint32_t) QSPI->INSTRFRAME.reg;

    if (data != NULL) {
        memcpy((uint8_t *) QSPI_AHB, data, length);
    }

    QSPI->CTRLA.reg = QSPI_CTRLA_ENABLE | QSPI_CTRLA_LASTXFER;

    while( !QSPI->INTFLAG.bit.INSTREND );

    QSPI->INTFLAG.reg = QSPI_INTFLAG_INSTREND;

    samd_peripherals_enable_cache();

    return true;
}

bool spi_flash_sector_command(uint8_t command, uint32_t address) {
    QSPI->INSTRCTRL.bit.INSTR = command;
    QSPI->INSTRADDR.bit.ADDR = address;

    QSPI->INSTRFRAME.reg = QSPI_INSTRFRAME_WIDTH_SINGLE_BIT_SPI |
                           QSPI_INSTRFRAME_ADDRLEN_24BITS |
                           QSPI_INSTRFRAME_TFRTYPE_WRITE |
                           QSPI_INSTRFRAME_INSTREN |
                           QSPI_INSTRFRAME_ADDREN;

    QSPI->CTRLA.reg = QSPI_CTRLA_ENABLE | QSPI_CTRLA_LASTXFER;

    while( !QSPI->INTFLAG.bit.INSTREND );

    QSPI->INTFLAG.reg = QSPI_INTFLAG_INSTREND;

    return true;
}

bool spi_flash_write_data(uint32_t address, uint8_t* data, uint32_t length) {
    samd_peripherals_disable_and_clear_cache();

    QSPI->INSTRCTRL.bit.INSTR = CMD_PAGE_PROGRAM;
    uint32_t mode = QSPI_INSTRFRAME_WIDTH_SINGLE_BIT_SPI;

    QSPI->INSTRFRAME.reg = mode |
                           QSPI_INSTRFRAME_ADDRLEN_24BITS |
                           QSPI_INSTRFRAME_TFRTYPE_WRITEMEMORY |
                           QSPI_INSTRFRAME_INSTREN |
                           QSPI_INSTRFRAME_ADDREN |
                           QSPI_INSTRFRAME_DATAEN;

    memcpy(((uint8_t *) QSPI_AHB) + address, data, length);
    // TODO(tannewt): Fix DMA and enable it.
    // qspi_dma_write(address, data, length);

    QSPI->CTRLA.reg = QSPI_CTRLA_ENABLE | QSPI_CTRLA_LASTXFER;

    while( !QSPI->INTFLAG.bit.INSTREND );

    QSPI->INTFLAG.reg = QSPI_INTFLAG_INSTREND;

    samd_peripherals_enable_cache();

    return true;
}

bool spi_flash_read_data(uint32_t address, uint8_t* data, uint32_t length) {
    samd_peripherals_disable_and_clear_cache();

    #ifdef EXTERNAL_FLASH_QSPI_DUAL
    QSPI->INSTRCTRL.bit.INSTR = CMD_DUAL_READ;
    uint32_t mode = QSPI_INSTRFRAME_WIDTH_DUAL_OUTPUT;
    #else
    QSPI->INSTRCTRL.bit.INSTR = CMD_QUAD_READ;
    uint32_t mode = QSPI_INSTRFRAME_WIDTH_QUAD_OUTPUT;
    #endif

    QSPI->INSTRFRAME.reg = mode |
                           QSPI_INSTRFRAME_ADDRLEN_24BITS |
                           QSPI_INSTRFRAME_TFRTYPE_READMEMORY |
                           QSPI_INSTRFRAME_INSTREN |
                           QSPI_INSTRFRAME_ADDREN |
                           QSPI_INSTRFRAME_DATAEN |
                           QSPI_INSTRFRAME_DUMMYLEN(8);

    memcpy(data, ((uint8_t *) QSPI_AHB) + address, length);
    // TODO(tannewt): Fix DMA and enable it.
    // qspi_dma_read(address, data, length);

    QSPI->CTRLA.reg = QSPI_CTRLA_ENABLE | QSPI_CTRLA_LASTXFER;

    while( !QSPI->INTFLAG.bit.INSTREND );

    QSPI->INTFLAG.reg = QSPI_INTFLAG_INSTREND;

    samd_peripherals_enable_cache();

    return true;
}


void spi_flash_init(void) {
    MCLK->APBCMASK.bit.QSPI_ = true;
    MCLK->AHBMASK.bit.QSPI_ = true;
    MCLK->AHBMASK.bit.QSPI_2X_ = false; // Only true if we are doing DDR.

    QSPI->CTRLA.reg = QSPI_CTRLA_SWRST;
    // We don't need to wait because we're running as fast as the CPU.

    // Slow, good for debugging with Saleae
    // QSPI->BAUD.bit.BAUD = 32;
    // Super fast, may be unreliable when Saleae is connected to high speed lines.
    QSPI->BAUD.bit.BAUD = 2;
    QSPI->CTRLB.reg = QSPI_CTRLB_MODE_MEMORY |        // Serial memory mode (map to QSPI_AHB)
                      QSPI_CTRLB_DATALEN_8BITS |
                      QSPI_CTRLB_CSMODE_LASTXFER;

    QSPI->CTRLA.reg = QSPI_CTRLA_ENABLE;

    // The QSPI is only connected to one set of pins in the SAMD51 so we can hard code it.
    uint32_t pins[6] = {PIN_PA08, PIN_PA09, PIN_PA10, PIN_PA11, PIN_PB10, PIN_PB11};
    for (uint8_t i = 0; i < 6; i++) {
        gpio_set_pin_direction(pins[i], GPIO_DIRECTION_IN);
        gpio_set_pin_pull_mode(pins[i], GPIO_PULL_OFF);
        gpio_set_pin_function(pins[i], GPIO_PIN_FUNCTION_H);
    }
}

void spi_flash_init_device(const external_flash_device* device) {
    check_quad_enable(device);

    // TODO(tannewt): Adjust the speed for the found device.
}