/* * This file is part of the Micro Python project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2016 Damien P. George * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include #include "lib/utils/context_manager_helpers.h" #include "py/objproperty.h" #include "py/runtime.h" #include "shared-bindings/microcontroller/Pin.h" #include "shared-bindings/pulseio/PWMOut.h" #include "shared-bindings/util.h" #include "supervisor/shared/translate.h" //| class PWMOut: //| """.. currentmodule:: pulseio //| //| :class:`PWMOut` -- Output a Pulse Width Modulated signal //| ======================================================== //| //| PWMOut can be used to output a PWM signal on a given pin.""" //| //| def __init__(self, pin: microcontroller.Pin, *, duty_cycle: int = 0, frequency: int = 500, variable_frequency: bool = False): //| """Create a PWM object associated with the given pin. This allows you to //| write PWM signals out on the given pin. Frequency is fixed after init //| unless ``variable_frequency`` is True. //| //| .. note:: When ``variable_frequency`` is True, further PWM outputs may be //| limited because it may take more internal resources to be flexible. So, //| when outputting both fixed and flexible frequency signals construct the //| fixed outputs first. //| //| :param ~microcontroller.Pin pin: The pin to output to //| :param int duty_cycle: The fraction of each pulse which is high. 16-bit //| :param int frequency: The target frequency in Hertz (32-bit) //| :param bool variable_frequency: True if the frequency will change over time //| //| Simple LED fade:: //| //| import pulseio //| import board //| //| pwm = pulseio.PWMOut(board.D13) # output on D13 //| pwm.duty_cycle = 2 ** 15 # Cycles the pin with 50% duty cycle (half of 2 ** 16) at the default 500hz //| //| PWM at specific frequency (servos and motors):: //| //| import pulseio //| import board //| //| pwm = pulseio.PWMOut(board.D13, frequency=50) //| pwm.duty_cycle = 2 ** 15 # Cycles the pin with 50% duty cycle (half of 2 ** 16) at 50hz //| //| Variable frequency (usually tones):: //| //| import pulseio //| import board //| import time //| //| pwm = pulseio.PWMOut(board.D13, duty_cycle=2 ** 15, frequency=440, variable_frequency=True) //| time.sleep(0.2) //| pwm.frequency = 880 //| time.sleep(0.1)""" //| ... //| STATIC mp_obj_t pulseio_pwmout_make_new(const mp_obj_type_t *type, size_t n_args, const mp_obj_t *args, mp_map_t *kw_args) { enum { ARG_pin, ARG_duty_cycle, ARG_frequency, ARG_variable_frequency }; static const mp_arg_t allowed_args[] = { { MP_QSTR_pin, MP_ARG_REQUIRED | MP_ARG_OBJ, }, { MP_QSTR_duty_cycle, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 0} }, { MP_QSTR_frequency, MP_ARG_KW_ONLY | MP_ARG_INT, {.u_int = 500} }, { MP_QSTR_variable_frequency, MP_ARG_KW_ONLY | MP_ARG_BOOL, {.u_bool = false} }, }; mp_arg_val_t parsed_args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all(n_args, args, kw_args, MP_ARRAY_SIZE(allowed_args), allowed_args, parsed_args); const mcu_pin_obj_t *pin = validate_obj_is_free_pin(parsed_args[ARG_pin].u_obj); uint16_t duty_cycle = parsed_args[ARG_duty_cycle].u_int; uint32_t frequency = parsed_args[ARG_frequency].u_int; bool variable_frequency = parsed_args[ARG_variable_frequency].u_bool; // create PWM object from the given pin pulseio_pwmout_obj_t *self = m_new_obj(pulseio_pwmout_obj_t); self->base.type = &pulseio_pwmout_type; pwmout_result_t result = common_hal_pulseio_pwmout_construct(self, pin, duty_cycle, frequency, variable_frequency); if (result == PWMOUT_INVALID_PIN) { mp_raise_ValueError(translate("Invalid pin")); } else if (result == PWMOUT_INVALID_FREQUENCY) { mp_raise_ValueError(translate("Invalid PWM frequency")); } else if (result == PWMOUT_ALL_TIMERS_ON_PIN_IN_USE) { mp_raise_ValueError(translate("All timers for this pin are in use")); } else if (result == PWMOUT_ALL_TIMERS_IN_USE) { mp_raise_RuntimeError(translate("All timers in use")); } return MP_OBJ_FROM_PTR(self); } //| def deinit(self, ) -> Any: //| """Deinitialises the PWMOut and releases any hardware resources for reuse.""" //| ... //| STATIC mp_obj_t pulseio_pwmout_deinit(mp_obj_t self_in) { pulseio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); common_hal_pulseio_pwmout_deinit(self); return mp_const_none; } STATIC MP_DEFINE_CONST_FUN_OBJ_1(pulseio_pwmout_deinit_obj, pulseio_pwmout_deinit); STATIC void check_for_deinit(pulseio_pwmout_obj_t *self) { if (common_hal_pulseio_pwmout_deinited(self)) { raise_deinited_error(); } } //| def __enter__(self, ) -> Any: //| """No-op used by Context Managers.""" //| ... //| // Provided by context manager helper. //| def __exit__(self, ) -> Any: //| """Automatically deinitializes the hardware when exiting a context. See //| :ref:`lifetime-and-contextmanagers` for more info.""" //| ... //| STATIC mp_obj_t pulseio_pwmout_obj___exit__(size_t n_args, const mp_obj_t *args) { (void)n_args; common_hal_pulseio_pwmout_deinit(args[0]); return mp_const_none; } STATIC MP_DEFINE_CONST_FUN_OBJ_VAR_BETWEEN(pulseio_pwmout___exit___obj, 4, 4, pulseio_pwmout_obj___exit__); //| duty_cycle: Any = ... //| """16 bit value that dictates how much of one cycle is high (1) versus low //| (0). 0xffff will always be high, 0 will always be low and 0x7fff will //| be half high and then half low. //| //| Depending on how PWM is implemented on a specific board, the internal //| representation for duty cycle might have less than 16 bits of resolution. //| Reading this property will return the value from the internal representation, //| so it may differ from the value set.""" //| STATIC mp_obj_t pulseio_pwmout_obj_get_duty_cycle(mp_obj_t self_in) { pulseio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); return MP_OBJ_NEW_SMALL_INT(common_hal_pulseio_pwmout_get_duty_cycle(self)); } MP_DEFINE_CONST_FUN_OBJ_1(pulseio_pwmout_get_duty_cycle_obj, pulseio_pwmout_obj_get_duty_cycle); STATIC mp_obj_t pulseio_pwmout_obj_set_duty_cycle(mp_obj_t self_in, mp_obj_t duty_cycle) { pulseio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); mp_int_t duty = mp_obj_get_int(duty_cycle); if (duty < 0 || duty > 0xffff) { mp_raise_ValueError(translate("PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)")); } common_hal_pulseio_pwmout_set_duty_cycle(self, duty); return mp_const_none; } MP_DEFINE_CONST_FUN_OBJ_2(pulseio_pwmout_set_duty_cycle_obj, pulseio_pwmout_obj_set_duty_cycle); const mp_obj_property_t pulseio_pwmout_duty_cycle_obj = { .base.type = &mp_type_property, .proxy = {(mp_obj_t)&pulseio_pwmout_get_duty_cycle_obj, (mp_obj_t)&pulseio_pwmout_set_duty_cycle_obj, (mp_obj_t)&mp_const_none_obj}, }; //| frequency: Any = ... //| """32 bit value that dictates the PWM frequency in Hertz (cycles per //| second). Only writeable when constructed with ``variable_frequency=True``. //| //| Depending on how PWM is implemented on a specific board, the internal value //| for the PWM's duty cycle may need to be recalculated when the frequency //| changes. In these cases, the duty cycle is automatically recalculated //| from the original duty cycle value. This should happen without any need //| to manually re-set the duty cycle.""" //| STATIC mp_obj_t pulseio_pwmout_obj_get_frequency(mp_obj_t self_in) { pulseio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); return MP_OBJ_NEW_SMALL_INT(common_hal_pulseio_pwmout_get_frequency(self)); } MP_DEFINE_CONST_FUN_OBJ_1(pulseio_pwmout_get_frequency_obj, pulseio_pwmout_obj_get_frequency); STATIC mp_obj_t pulseio_pwmout_obj_set_frequency(mp_obj_t self_in, mp_obj_t frequency) { pulseio_pwmout_obj_t *self = MP_OBJ_TO_PTR(self_in); check_for_deinit(self); if (!common_hal_pulseio_pwmout_get_variable_frequency(self)) { mp_raise_AttributeError(translate( "PWM frequency not writable when variable_frequency is False on " "construction.")); } common_hal_pulseio_pwmout_set_frequency(self, mp_obj_get_int(frequency)); return mp_const_none; } MP_DEFINE_CONST_FUN_OBJ_2(pulseio_pwmout_set_frequency_obj, pulseio_pwmout_obj_set_frequency); const mp_obj_property_t pulseio_pwmout_frequency_obj = { .base.type = &mp_type_property, .proxy = {(mp_obj_t)&pulseio_pwmout_get_frequency_obj, (mp_obj_t)&pulseio_pwmout_set_frequency_obj, (mp_obj_t)&mp_const_none_obj}, }; STATIC const mp_rom_map_elem_t pulseio_pwmout_locals_dict_table[] = { // Methods { MP_ROM_QSTR(MP_QSTR_deinit), MP_ROM_PTR(&pulseio_pwmout_deinit_obj) }, { MP_ROM_QSTR(MP_QSTR___enter__), MP_ROM_PTR(&default___enter___obj) }, { MP_ROM_QSTR(MP_QSTR___exit__), MP_ROM_PTR(&pulseio_pwmout___exit___obj) }, // Properties { MP_ROM_QSTR(MP_QSTR_duty_cycle), MP_ROM_PTR(&pulseio_pwmout_duty_cycle_obj) }, { MP_ROM_QSTR(MP_QSTR_frequency), MP_ROM_PTR(&pulseio_pwmout_frequency_obj) }, // TODO(tannewt): Add enabled to determine whether the signal is output // without giving up the resources. Useful for IR output. }; STATIC MP_DEFINE_CONST_DICT(pulseio_pwmout_locals_dict, pulseio_pwmout_locals_dict_table); const mp_obj_type_t pulseio_pwmout_type = { { &mp_type_type }, .name = MP_QSTR_PWMOut, .make_new = pulseio_pwmout_make_new, .locals_dict = (mp_obj_dict_t*)&pulseio_pwmout_locals_dict, };