/**
  ******************************************************************************
  * @file    usbh_usr.c
  * @author  MCD Application Team
  * @version V2.1.0
  * @date    19-March-2012
  * @brief   This file includes the user application layer
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
  *
  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        http://www.st.com/software_license_agreement_liberty_v2
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
  ******************************************************************************
  */ 

/* Includes ------------------------------------------------------------------*/
#include <stdio.h>

#include "usbh_usr.h"
#include "usbh_hid_mouse.h"
#include "usbh_hid_keybd.h"

extern void led_state(int, int);

/** @addtogroup USBH_USER
* @{
*/

/** @addtogroup USBH_HID_DEMO_USER_CALLBACKS
* @{
*/

/** @defgroup USBH_USR
* @brief This file is the Header file for usbh_usr.c
* @{
*/ 


/**
* @}
*/ 

/** @addtogroup USER
* @{
*/

/** @defgroup USBH_USR 
* @brief    This file includes the user application layer
* @{
*/ 

/** @defgroup USBH_CORE_Exported_Types
* @{
*/ 



/** @defgroup USBH_USR_Private_Defines
* @{
*/ 
/**
* @}
*/ 


/** @defgroup USBH_USR_Private_Macros
* @{
*/ 
/**
* @}
*/ 

/** @defgroup USBH_USR_Private_Variables
* @{
*/
/*  Points to the DEVICE_PROP structure of current device */
/*  The purpose of this register is to speed up the execution */

USBH_Usr_cb_TypeDef USR_Callbacks =
{
  USBH_USR_Init,
  USBH_USR_DeInit,
  USBH_USR_DeviceAttached,
  USBH_USR_ResetDevice,
  USBH_USR_DeviceDisconnected,
  USBH_USR_OverCurrentDetected,
  USBH_USR_DeviceSpeedDetected,
  USBH_USR_Device_DescAvailable,
  USBH_USR_DeviceAddressAssigned,
  USBH_USR_Configuration_DescAvailable,
  USBH_USR_Manufacturer_String,
  USBH_USR_Product_String,
  USBH_USR_SerialNum_String,
  USBH_USR_EnumerationDone,
  USBH_USR_UserInput,
  NULL,
  USBH_USR_DeviceNotSupported,
  USBH_USR_UnrecoveredError
};

/**
* @}
*/

/** @defgroup USBH_USR_Private_Constants
* @{
*/ 

/**
* @}
*/



/** @defgroup USBH_USR_Private_FunctionPrototypes
* @{
*/ 
/**
* @}
*/ 


/** @defgroup USBH_USR_Private_Functions
* @{
*/ 





/**
* @brief  USBH_USR_Init 
*         Displays the message on LCD for host lib initialization
* @param  None
* @retval None
*/
void USBH_USR_Init(void)
{
  static uint8_t startup = 0;

  if (startup == 0) {
    startup = 1;

    printf("USB Host library started.\n"); 
  }
}

/**
* @brief  USBH_USR_DeviceAttached 
*         Displays the message on LCD on device attached
* @param  None
* @retval None
*/
void USBH_USR_DeviceAttached(void) {
    led_state(1, 1);
    USB_OTG_BSP_mDelay(900);
}

/**
* @brief  USBH_USR_UnrecoveredError
* @param  None
* @retval None
*/
void USBH_USR_UnrecoveredError(void) {
}

/**
* @brief  USBH_DisconnectEvent
*         Device disconnect event
* @param  None
* @retval None
*/
void USBH_USR_DeviceDisconnected (void)
{
    led_state(1, 0);
    led_state(2, 0);
    led_state(3, 0);
    led_state(4, 0);
    USB_OTG_BSP_mDelay(100);
}

/**
* @brief  USBH_USR_ResetUSBDevice 
*         Reset USB Device
* @param  None
* @retval None
*/
void USBH_USR_ResetDevice(void)
{
  /* Users can do their application actions here for the USB-Reset */
    led_state(3, 1);
    USB_OTG_BSP_mDelay(100);
    led_state(3, 0);
}


/**
* @brief  USBH_USR_DeviceSpeedDetected 
*         Displays the message on LCD for device speed
* @param  Devicespeed : Device Speed
* @retval None
*/
void USBH_USR_DeviceSpeedDetected(uint8_t DeviceSpeed)
{
    /*
  if(DeviceSpeed == HPRT0_PRTSPD_HIGH_SPEED)
  {
    printf(MSG_DEV_HIGHSPEED);
  }  
  else if(DeviceSpeed == HPRT0_PRTSPD_FULL_SPEED)
  {
    printf(MSG_DEV_FULLSPEED);
  }
  else if(DeviceSpeed == HPRT0_PRTSPD_LOW_SPEED)
  {
    printf(MSG_DEV_LOWSPEED);
  }
  else
  {
    printf(MSG_DEV_ERROR);
  }
  */
}

/**
* @brief  USBH_USR_Device_DescAvailable 
*         Displays the message on LCD for device descriptor
* @param  DeviceDesc : device descriptor
* @retval None
*/
void USBH_USR_Device_DescAvailable(void *DeviceDesc)
{
    /*
  USBH_DevDesc_TypeDef *hs;
  hs = DeviceDesc;  
  
  printf("VID : %04Xh\n" , (unsigned int)(*hs).idVendor);
  printf("PID : %04Xh\n" , (unsigned int)(*hs).idProduct);
  */
}

/**
* @brief  USBH_USR_DeviceAddressAssigned 
*         USB device is successfully assigned the Address 
* @param  None
* @retval None
*/
void USBH_USR_DeviceAddressAssigned(void)
{
  
}


/**
* @brief  USBH_USR_Conf_Desc 
*         Displays the message on LCD for configuration descriptor
* @param  ConfDesc : Configuration descriptor
* @retval None
*/
void USBH_USR_Configuration_DescAvailable(USBH_CfgDesc_TypeDef * cfgDesc,
                                          USBH_InterfaceDesc_TypeDef *itfDesc,
                                          USBH_EpDesc_TypeDef *epDesc)
{
    /*
  USBH_InterfaceDesc_TypeDef *id;
  
  id = itfDesc;  
  
  if((*id).bInterfaceClass  == 0x08)
  {
    printf(MSG_MSC_CLASS);
  }
  else if((*id).bInterfaceClass  == 0x03)
  {
    printf(MSG_HID_CLASS);
  }   
  */
}

/**
* @brief  USBH_USR_Manufacturer_String 
*         Displays the message on LCD for Manufacturer String 
* @param  ManufacturerString : Manufacturer String of Device
* @retval None
*/
void USBH_USR_Manufacturer_String(void *ManufacturerString) {
}

/**
* @brief  USBH_USR_Product_String 
*         Displays the message on LCD for Product String
* @param  ProductString : Product String of Device
* @retval None
*/
void USBH_USR_Product_String(void *ProductString) {
}

/**
* @brief  USBH_USR_SerialNum_String 
*         Displays the message on LCD for SerialNum_String 
* @param  SerialNumString : SerialNum_String of device
* @retval None
*/
void USBH_USR_SerialNum_String(void *SerialNumString) {
}

/**
* @brief  EnumerationDone 
*         User response request is displayed to ask for
*         application jump to class
* @param  None
* @retval None
*/
void USBH_USR_EnumerationDone(void) {
    /* Enumeration complete */
    led_state(2, 1);
    USB_OTG_BSP_mDelay(500);
}

/**
* @brief  USBH_USR_DeviceNotSupported
*         Device is not supported
* @param  None
* @retval None
*/
void USBH_USR_DeviceNotSupported(void){
}


/**
* @brief  USBH_USR_UserInput
*         User Action for application state entry
* @param  None
* @retval USBH_USR_Status : User response for key button
*/
USBH_USR_Status USBH_USR_UserInput(void) {
    return USBH_USR_RESP_OK;
}

/**
* @brief  USBH_USR_OverCurrentDetected
*         Device Overcurrent detection event
* @param  None
* @retval None
*/
void USBH_USR_OverCurrentDetected(void) {
}

/**
* @brief  USBH_USR_DeInit
*         Deint User state and associated variables
* @param  None
* @retval None
*/
void USBH_USR_DeInit(void)
{
}

/**
* @}
*/ 

/**
* @}
*/ 

/**
* @}
*/

/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/