/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2021 microDev
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include "shared-bindings/busio/UART.h"

#include "py/stream.h"
#include "py/mperrno.h"
#include "py/runtime.h"
#include "supervisor/shared/tick.h"
#include "shared/runtime/interrupt_char.h"
#include "common-hal/microcontroller/Pin.h"

#include "src/rp2_common/hardware_irq/include/hardware/irq.h"
#include "src/rp2_common/hardware_gpio/include/hardware/gpio.h"

#define NO_PIN 0xff

#define UART_INST(uart) (((uart) ? uart1 : uart0))

typedef enum {
    STATUS_FREE = 0,
    STATUS_BUSY,
    STATUS_NEVER_RESET
} uart_status_t;

static uart_status_t uart_status[NUM_UARTS];

void reset_uart(void) {
    for (uint8_t num = 0; num < NUM_UARTS; num++) {
        if (uart_status[num] == STATUS_BUSY) {
            uart_status[num] = STATUS_FREE;
            uart_deinit(UART_INST(num));
        }
    }
}

void never_reset_uart(uint8_t num) {
    uart_status[num] = STATUS_NEVER_RESET;
}

static uint8_t pin_init(const uint8_t uart, const mcu_pin_obj_t *pin, const uint8_t pin_type) {
    if (pin == NULL) {
        return NO_PIN;
    }
    if (!(((pin->number % 4) == pin_type) && ((((pin->number + 4) / 8) % NUM_UARTS) == uart))) {
        mp_raise_ValueError(translate("Invalid pins"));
    }
    claim_pin(pin);
    gpio_set_function(pin->number, GPIO_FUNC_UART);
    return pin->number;
}

static busio_uart_obj_t *active_uarts[NUM_UARTS];

static void _copy_into_ringbuf(ringbuf_t *r, uart_inst_t *uart) {
    while (uart_is_readable(uart) && ringbuf_num_empty(r) > 0) {
        ringbuf_put(r, (uint8_t)uart_get_hw(uart)->dr);
    }
}

static void shared_callback(busio_uart_obj_t *self) {
    _copy_into_ringbuf(&self->ringbuf, self->uart);
    // We always clear the interrupt so it doesn't continue to fire because we
    // may not have read everything available.
    uart_get_hw(self->uart)->icr = UART_UARTICR_RXIC_BITS;
}

static void uart0_callback(void) {
    shared_callback(active_uarts[0]);
}

static void uart1_callback(void) {
    shared_callback(active_uarts[1]);
}

void common_hal_busio_uart_construct(busio_uart_obj_t *self,
    const mcu_pin_obj_t *tx, const mcu_pin_obj_t *rx,
    const mcu_pin_obj_t *rts, const mcu_pin_obj_t *cts,
    const mcu_pin_obj_t *rs485_dir, bool rs485_invert,
    uint32_t baudrate, uint8_t bits, busio_uart_parity_t parity, uint8_t stop,
    mp_float_t timeout, uint16_t receiver_buffer_size, byte *receiver_buffer,
    bool sigint_enabled) {

    if (bits > 8) {
        mp_raise_ValueError(translate("Invalid word/bit length"));
    }

    if (receiver_buffer_size == 0) {
        mp_raise_ValueError(translate("Invalid buffer size"));
    }

    if ((rs485_dir != NULL) || (rs485_invert)) {
        mp_raise_NotImplementedError(translate("RS485 Not yet supported on this device"));
    }

    uint8_t uart_id = ((((tx != NULL) ? tx->number : rx->number) + 4) / 8) % NUM_UARTS;

    if (uart_status[uart_id] != STATUS_FREE) {
        mp_raise_RuntimeError(translate("All UART peripherals are in use"));
    } else {
        uart_status[uart_id] = STATUS_BUSY;
    }

    self->tx_pin = pin_init(uart_id, tx, 0);
    self->rx_pin = pin_init(uart_id, rx, 1);
    self->cts_pin = pin_init(uart_id, cts, 2);
    self->rts_pin = pin_init(uart_id, rts, 3);

    self->uart = UART_INST(uart_id);
    self->uart_id = uart_id;
    self->baudrate = baudrate;
    self->timeout_ms = timeout * 1000;

    uart_init(self->uart, self->baudrate);
    uart_set_fifo_enabled(self->uart, true);
    uart_set_format(self->uart, bits, stop, parity);
    uart_set_hw_flow(self->uart, (cts != NULL), (rts != NULL));

    if (rx != NULL) {
        // Initially allocate the UART's buffer in the long-lived part of the
        // heap. UARTs are generally long-lived objects, but the "make long-
        // lived" machinery is incapable of moving internal pointers like
        // self->buffer, so do it manually.  (However, as long as internal
        // pointers like this are NOT moved, allocating the buffer
        // in the long-lived pool is not strictly necessary)
        // (This is a macro.)
        if (!ringbuf_alloc(&self->ringbuf, receiver_buffer_size, true)) {
            mp_raise_msg(&mp_type_MemoryError, translate("Failed to allocate RX buffer"));
        }
        active_uarts[uart_id] = self;
        if (uart_id == 1) {
            self->uart_irq_id = UART1_IRQ;
            irq_set_exclusive_handler(self->uart_irq_id, uart1_callback);
        } else {
            self->uart_irq_id = UART0_IRQ;
            irq_set_exclusive_handler(self->uart_irq_id, uart0_callback);
        }
        irq_set_enabled(self->uart_irq_id, true);
        uart_set_irq_enables(self->uart, true /* rx has data */, false /* tx needs data */);
    }
}

bool common_hal_busio_uart_deinited(busio_uart_obj_t *self) {
    return self->tx_pin == NO_PIN && self->rx_pin == NO_PIN;
}

void common_hal_busio_uart_deinit(busio_uart_obj_t *self) {
    if (common_hal_busio_uart_deinited(self)) {
        return;
    }
    uart_deinit(self->uart);
    ringbuf_free(&self->ringbuf);
    active_uarts[self->uart_id] = NULL;
    uart_status[self->uart_id] = STATUS_FREE;
    reset_pin_number(self->tx_pin);
    reset_pin_number(self->rx_pin);
    reset_pin_number(self->cts_pin);
    reset_pin_number(self->rts_pin);
    self->tx_pin = NO_PIN;
    self->rx_pin = NO_PIN;
    self->cts_pin = NO_PIN;
    self->rts_pin = NO_PIN;
}

// Write characters.
size_t common_hal_busio_uart_write(busio_uart_obj_t *self, const uint8_t *data, size_t len, int *errcode) {
    if (self->tx_pin == NO_PIN) {
        mp_raise_ValueError(translate("No TX pin"));
    }

    size_t left_to_write = len;
    while (left_to_write > 0) {
        while (uart_is_writable(self->uart) && left_to_write > 0) {
            // Write and advance.
            uart_get_hw(self->uart)->dr = *data++;
            // Decrease how many chars left to write.
            left_to_write--;
        }
        RUN_BACKGROUND_TASKS;
    }

    return len;
}

// Read characters.
size_t common_hal_busio_uart_read(busio_uart_obj_t *self, uint8_t *data, size_t len, int *errcode) {
    if (self->rx_pin == NO_PIN) {
        mp_raise_ValueError(translate("No RX pin"));
    }

    if (len == 0) {
        // Nothing to read.
        return 0;
    }

    // Prevent conflict with uart irq.
    irq_set_enabled(self->uart_irq_id, false);

    // Copy as much received data as available, up to len bytes.
    size_t total_read = ringbuf_get_n(&self->ringbuf, data, len);

    // Check if we still need to read more data.
    if (len > total_read) {
        len -= total_read;
        uint64_t start_ticks = supervisor_ticks_ms64();
        // Busy-wait until timeout or until we've read enough chars.
        while (len > 0 && (supervisor_ticks_ms64() - start_ticks < self->timeout_ms)) {
            if (uart_is_readable(self->uart)) {
                // Read and advance.
                data[total_read] = uart_get_hw(self->uart)->dr;

                // Adjust the counters.
                len--;
                total_read++;

                // Reset the timeout on every character read.
                start_ticks = supervisor_ticks_ms64();
            }
            RUN_BACKGROUND_TASKS;
            // Allow user to break out of a timeout with a KeyboardInterrupt.
            if (mp_hal_is_interrupted()) {
                break;
            }
        }
    }

    // Now that we've emptied the ringbuf some, fill it up with anything in the
    // FIFO. This ensures that we'll empty the FIFO as much as possible and
    // reset the interrupt when we catch up.
    _copy_into_ringbuf(&self->ringbuf, self->uart);

    // Re-enable irq.
    irq_set_enabled(self->uart_irq_id, true);

    if (total_read == 0) {
        *errcode = EAGAIN;
        return MP_STREAM_ERROR;
    }

    return total_read;
}

uint32_t common_hal_busio_uart_get_baudrate(busio_uart_obj_t *self) {
    return self->baudrate;
}

void common_hal_busio_uart_set_baudrate(busio_uart_obj_t *self, uint32_t baudrate) {
    self->baudrate = baudrate;
    uart_set_baudrate(self->uart, baudrate);
}

mp_float_t common_hal_busio_uart_get_timeout(busio_uart_obj_t *self) {
    return (mp_float_t)(self->timeout_ms / 1000.0f);
}

void common_hal_busio_uart_set_timeout(busio_uart_obj_t *self, mp_float_t timeout) {
    self->timeout_ms = timeout * 1000;
}

uint32_t common_hal_busio_uart_rx_characters_available(busio_uart_obj_t *self) {
    // Prevent conflict with uart irq.
    irq_set_enabled(self->uart_irq_id, false);
    // The UART only interrupts after a threshold so make sure to copy anything
    // out of its FIFO before measuring how many bytes we've received.
    _copy_into_ringbuf(&self->ringbuf, self->uart);
    irq_set_enabled(self->uart_irq_id, false);
    return ringbuf_num_filled(&self->ringbuf);
}

void common_hal_busio_uart_clear_rx_buffer(busio_uart_obj_t *self) {
    // Prevent conflict with uart irq.
    irq_set_enabled(self->uart_irq_id, false);
    ringbuf_clear(&self->ringbuf);

    // Throw away the FIFO contents too.
    while (uart_is_readable(self->uart)) {
        (void)uart_get_hw(self->uart)->dr;
    }
    irq_set_enabled(self->uart_irq_id, true);
}

bool common_hal_busio_uart_ready_to_tx(busio_uart_obj_t *self) {
    if (self->tx_pin == NO_PIN) {
        return false;
    }
    return uart_is_writable(self->uart);
}