/* * This file is part of the MicroPython project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2018 Damien P. George * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ // Common settings and defaults for board configuration. // The defaults here should be overridden in mpconfigboard.h. #include STM32_HAL_H /*****************************************************************************/ // Feature settings with defaults // Whether to enable storage on the internal flash of the MCU #ifndef MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE #define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (1) #endif // Whether to enable the RTC, exposed as pyb.RTC #ifndef MICROPY_HW_ENABLE_RTC #define MICROPY_HW_ENABLE_RTC (0) #endif // Whether to enable the hardware RNG peripheral, exposed as pyb.rng() #ifndef MICROPY_HW_ENABLE_RNG #define MICROPY_HW_ENABLE_RNG (0) #endif // Whether to enable the ADC peripheral, exposed as pyb.ADC and pyb.ADCAll #ifndef MICROPY_HW_ENABLE_ADC #define MICROPY_HW_ENABLE_ADC (1) #endif // Whether to enable the DAC peripheral, exposed as pyb.DAC #ifndef MICROPY_HW_ENABLE_DAC #define MICROPY_HW_ENABLE_DAC (0) #endif // Whether to enable the CAN peripheral, exposed as pyb.CAN #ifndef MICROPY_HW_ENABLE_CAN #define MICROPY_HW_ENABLE_CAN (0) #endif // Whether to enable USB support #ifndef MICROPY_HW_ENABLE_USB #define MICROPY_HW_ENABLE_USB (0) #endif // Whether to enable the PA0-PA3 servo driver, exposed as pyb.Servo #ifndef MICROPY_HW_ENABLE_SERVO #define MICROPY_HW_ENABLE_SERVO (0) #endif // Whether to enable a USR switch, exposed as pyb.Switch #ifndef MICROPY_HW_HAS_SWITCH #define MICROPY_HW_HAS_SWITCH (0) #endif // Whether to expose internal flash storage as pyb.Flash #ifndef MICROPY_HW_HAS_FLASH #define MICROPY_HW_HAS_FLASH (0) #endif // Whether to enable the SD card interface, exposed as pyb.SDCard #ifndef MICROPY_HW_HAS_SDCARD #define MICROPY_HW_HAS_SDCARD (0) #endif // Whether to enable the MMA7660 driver, exposed as pyb.Accel #ifndef MICROPY_HW_HAS_MMA7660 #define MICROPY_HW_HAS_MMA7660 (0) #endif // Whether to enable the LCD32MK driver, exposed as pyb.LCD #ifndef MICROPY_HW_HAS_LCD #define MICROPY_HW_HAS_LCD (0) #endif /*****************************************************************************/ // General configuration // Configuration for STM32F4 series #if defined(STM32F4) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1fff7a10) #define PYB_EXTI_NUM_VECTORS (23) #define MICROPY_HW_MAX_TIMER (14) #define MICROPY_HW_MAX_UART (6) // Configuration for STM32F7 series #elif defined(STM32F7) #if defined(STM32F722xx) || defined(STM32F723xx) || defined(STM32F732xx) || defined(STM32F733xx) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1ff07a10) #else #define MP_HAL_UNIQUE_ID_ADDRESS (0x1ff0f420) #endif #define PYB_EXTI_NUM_VECTORS (24) #define MICROPY_HW_MAX_TIMER (17) #define MICROPY_HW_MAX_UART (8) // Configuration for STM32H7 series #elif defined(STM32H7) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1ff1e800) #define PYB_EXTI_NUM_VECTORS (24) #define MICROPY_HW_MAX_TIMER (17) #define MICROPY_HW_MAX_UART (8) // Configuration for STM32L4 series #elif defined(STM32L4) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1fff7590) #define PYB_EXTI_NUM_VECTORS (23) #define MICROPY_HW_MAX_TIMER (17) #define MICROPY_HW_MAX_UART (6) #else #error Unsupported MCU series #endif #if MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE // Provide block device macros if internal flash storage is enabled #define MICROPY_HW_BDEV_IOCTL flash_bdev_ioctl #define MICROPY_HW_BDEV_READBLOCK flash_bdev_readblock #define MICROPY_HW_BDEV_WRITEBLOCK flash_bdev_writeblock #endif // Enable hardware I2C if there are any peripherals defined #if defined(MICROPY_HW_I2C1_SCL) || defined(MICROPY_HW_I2C2_SCL) \ || defined(MICROPY_HW_I2C3_SCL) || defined(MICROPY_HW_I2C4_SCL) #define MICROPY_HW_ENABLE_HW_I2C (1) #else #define MICROPY_HW_ENABLE_HW_I2C (0) #endif // Pin definition header file #define MICROPY_PIN_DEFS_PORT_H "pin_defs_stm32.h" // D-cache clean/invalidate helpers #if __DCACHE_PRESENT == 1 #define MP_HAL_CLEANINVALIDATE_DCACHE(addr, size) \ (SCB_CleanInvalidateDCache_by_Addr((uint32_t*)((uint32_t)addr & ~0x1f), \ ((uint32_t)((uint8_t*)addr + size + 0x1f) & ~0x1f) - ((uint32_t)addr & ~0x1f))) #define MP_HAL_CLEAN_DCACHE(addr, size) \ (SCB_CleanDCache_by_Addr((uint32_t*)((uint32_t)addr & ~0x1f), \ ((uint32_t)((uint8_t*)addr + size + 0x1f) & ~0x1f) - ((uint32_t)addr & ~0x1f))) #else #define MP_HAL_CLEANINVALIDATE_DCACHE(addr, size) #define MP_HAL_CLEAN_DCACHE(addr, size) #endif #define MICROPY_HW_USES_BOOTLOADER (MICROPY_HW_VTOR != 0x08000000)