# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "PO-Revision-Date: 2022-04-19 17:07+0000\n" "Last-Translator: Siyabend Ürün \n" "Language-Team: none\n" "Language: tr\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Generator: Weblate 4.12-dev\n" #: main.c msgid "" "\n" "Code done running.\n" msgstr "" "\n" "Program çalıştırıldı.\n" #: main.c msgid "" "\n" "Code stopped by auto-reload. Reloading soon.\n" msgstr "" "\n" "Program otomatik yeniden yükleme tarafından durduruldu. Birazdan tekrar " "yüklenecek.\n" #: supervisor/shared/safe_mode.c msgid "" "\n" "Please file an issue with the contents of your CIRCUITPY drive at \n" "https://github.com/adafruit/circuitpython/issues\n" msgstr "" "\n" "Lütfen, şu adrese CIRCUITPY sürücünüzün içerikleri ile beraber bir hata/konu " "kaydı ekleyin\n" "https://github.com/adafruit/circuitpython/issues\n" #: py/obj.c msgid " File \"%q\"" msgstr " \"%q\" dosyası" #: py/obj.c msgid " File \"%q\", line %d" msgstr " \"%q\" dosyası, %d numaralı satır" #: py/builtinhelp.c msgid " is of type %q\n" msgstr " nesnesi, %q tipindedir\n" #: main.c msgid " not found.\n" msgstr " bulunamadı.\n" #: main.c msgid " output:\n" msgstr " çıktı:\n" #: py/objstr.c #, c-format msgid "%%c requires int or char" msgstr "%%c int veya char tipine ihtiyaç duyar" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "" "%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d" msgstr "" "%d adres pinleri, %d RGB pinleri ve %d döşemeleri %d'nin yüksekliği " "gösterir, %d'nin değil" #: ports/cxd56/common-hal/analogio/AnalogOut.c ports/cxd56/common-hal/rtc/RTC.c #: ports/espressif/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c #: ports/nrf/common-hal/analogio/AnalogOut.c ports/nrf/common-hal/rtc/RTC.c #: ports/raspberrypi/common-hal/analogio/AnalogOut.c #: ports/raspberrypi/common-hal/rtc/RTC.c ports/stm/common-hal/rtc/RTC.c msgid "%q" msgstr "" #: shared-bindings/microcontroller/Pin.c msgid "%q and %q contain duplicate pins" msgstr "%q ve %q yinelenen pinler içeriyor" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "%q and %q must be different" msgstr "" #: shared-bindings/microcontroller/Pin.c msgid "%q contains duplicate pins" msgstr "%q yinelenen pinler içeriyor" #: ports/atmel-samd/common-hal/sdioio/SDCard.c msgid "%q failure: %d" msgstr "%q hata: %d" #: shared-bindings/microcontroller/Pin.c msgid "%q in use" msgstr "%q kullanımda" #: py/obj.c py/objstr.c py/objstrunicode.c msgid "%q index out of range" msgstr "%q indeksi aralık dışında" #: py/obj.c msgid "%q indices must be integers, not %s" msgstr "%q indeksleri integer olmalı, %s değil" #: shared-module/bitbangio/SPI.c msgid "%q init failed" msgstr "" #: py/argcheck.c msgid "%q length must be %d" msgstr "" #: py/argcheck.c msgid "%q length must be %d-%d" msgstr "%q boyutları %d-%d olmalıdır" #: py/argcheck.c msgid "%q length must be <= %d" msgstr "" #: py/argcheck.c msgid "%q length must be >= %d" msgstr "" #: shared-bindings/busio/I2C.c msgid "%q length must be >= 1" msgstr "%q boyutu >=1 olmalıdır" #: py/argcheck.c msgid "%q must be %d" msgstr "" #: py/argcheck.c msgid "%q must be %d-%d" msgstr "%q, %d-%d olmalıdır" #: shared-bindings/displayio/Display.c msgid "%q must be 1 when %q is True" msgstr "" #: py/argcheck.c shared-bindings/gifio/GifWriter.c msgid "%q must be <= %d" msgstr "%q <= %d olmalıdır" #: py/argcheck.c msgid "%q must be >= %d" msgstr "%q >= %d olmalıdır" #: py/argcheck.c msgid "%q must be >= 0" msgstr "%q >= 0 olmalıdır" #: shared-bindings/vectorio/Circle.c shared-bindings/vectorio/Rectangle.c msgid "%q must be >= 1" msgstr "%q >= 1 olmalıdır" #: py/argcheck.c msgid "%q must be a string" msgstr "%q bir string olmalıdır" #: py/argcheck.c msgid "%q must be an int" msgstr "" #: py/argcheck.c msgid "%q must be of type %q" msgstr "%q, %q türünde olmalıdır" #: shared-bindings/digitalio/Pull.c msgid "%q must be of type %q or None" msgstr "%q, %q ya da None türünde olmalıdır" #: ports/atmel-samd/common-hal/busio/UART.c msgid "%q must be power of 2" msgstr "%q, 2'nin kuvveti olmalıdır" #: shared-bindings/wifi/Monitor.c msgid "%q out of bounds" msgstr "%q sınırların dışında" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: ports/stm/common-hal/pulseio/PulseIn.c py/argcheck.c #: shared-bindings/canio/Match.c msgid "%q out of range" msgstr "%q aralık dışında" #: ports/atmel-samd/common-hal/microcontroller/Pin.c msgid "%q pin invalid" msgstr "%q pini geçersiz" #: shared-bindings/usb_hid/Device.c msgid "%q with a report ID of 0 must be of length 1" msgstr "Rapor kimliği 0 olan %q, 1 uzunluğunda olmalıdır" #: py/bc.c py/objnamedtuple.c msgid "%q() takes %d positional arguments but %d were given" msgstr "%q(), %d konumsal argümanını alır ancak %d verildi" #: shared-bindings/usb_hid/Device.c msgid "%q, %q, and %q must all be the same length" msgstr "%q, %q ve %q aynı uzunlukta olmalıdır" #: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c #, c-format msgid "%s error 0x%x" msgstr "%s hatası 0x%x" #: py/argcheck.c msgid "'%q' argument required" msgstr "'%q' argümanı gerekli" #: py/proto.c msgid "'%q' object does not support '%q'" msgstr "'%q' nesnesi '%q' öğesini desteklemiyor" #: py/runtime.c msgid "'%q' object is not an iterator" msgstr "'%q' nesnesi bir iteratör değildir" #: py/objtype.c py/runtime.c shared-module/atexit/__init__.c msgid "'%q' object is not callable" msgstr "'%q' nesnesi çağrılabilir değil" #: py/runtime.c msgid "'%q' object is not iterable" msgstr "'%q' nesnesi iterable değildir" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects a label" msgstr "'%s' bir etiket bekliyor" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects a register" msgstr "'%s' bir yazmaç bekliyor" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects a special register" msgstr "'%s' özel bir yazmaç bekliyor" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects an FPU register" msgstr "'%s' bir FPU yazmacı bekliyor" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects an address of the form [a, b]" msgstr "'%s', [a, b] biçiminde bir adres bekliyor" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects an integer" msgstr "'%s' bir integer bekliyor" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects at most r%d" msgstr "'%s' en fazla r%d bekler" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects {r0, r1, ...}" msgstr "'%s' {r0, r1, ...} bekliyor" #: py/emitinlinextensa.c #, c-format msgid "'%s' integer %d isn't within range %d..%d" msgstr "'%s' integer %d, %d..%d aralığında değil" #: py/emitinlinethumb.c #, c-format msgid "'%s' integer 0x%x doesn't fit in mask 0x%x" msgstr "'%s' integer 0x%x, 0x%x maskesine uymuyor" #: py/obj.c #, c-format msgid "'%s' object doesn't support item assignment" msgstr "'%s' nesnesi, öğe atamasını desteklemiyor" #: py/obj.c #, c-format msgid "'%s' object doesn't support item deletion" msgstr "'%s' nesnesi, öğe silmeyi desteklemiyor" #: py/runtime.c msgid "'%s' object has no attribute '%q'" msgstr "'%s' nesnesinin '%q' özelliği yok" #: py/obj.c #, c-format msgid "'%s' object isn't subscriptable" msgstr "'%s' nesnesi subscriptable özelliğe sahip değil" #: py/objstr.c #, fuzzy msgid "'=' alignment not allowed in string format specifier" msgstr "'=' hizalamasına string biçiminde izin verilmez" #: shared-module/struct/__init__.c msgid "'S' and 'O' are not supported format types" msgstr "'S' ve 'O' desteklenen biçim türlerinden değildir" #: py/compile.c msgid "'align' requires 1 argument" msgstr "'align' 1 argümana ihtiyaç duyar" #: py/compile.c msgid "'await' outside function" msgstr "fonksiyon dışında 'await'" #: py/compile.c msgid "'await', 'async for' or 'async with' outside async function" msgstr "" "asenkron fonksiyon dışında kullanılan 'await', 'async for' ya da 'async with'" #: py/compile.c msgid "'break' outside loop" msgstr "döngü dışında 'break'" #: py/compile.c msgid "'continue' outside loop" msgstr "döngü dışında 'continue'" #: py/objgenerator.c msgid "'coroutine' object is not an iterator" msgstr "'coroutine' nesnesi bir iteratör değildir" #: py/compile.c msgid "'data' requires at least 2 arguments" msgstr "'data' en az 2 argümana ihtiyaç duyar" #: py/compile.c msgid "'data' requires integer arguments" msgstr "'data' integer tipinde argümanlara ihtiyaç duyar" #: py/compile.c msgid "'label' requires 1 argument" msgstr "'label' 1 argümana ihtiyaç duyar" #: py/compile.c msgid "'return' outside function" msgstr "fonksiyon dışında 'return'" #: py/compile.c msgid "'yield from' inside async function" msgstr "asenkron fonksiyon içinde 'yield from'" #: py/compile.c msgid "'yield' outside function" msgstr "fonksiyon dışında 'yield'" #: py/compile.c msgid "*x must be assignment target" msgstr "" #: py/obj.c msgid ", in %q\n" msgstr ", içinde %q\n" #: py/objcomplex.c msgid "0.0 to a complex power" msgstr "0.0'dan bir karmaşık güce" #: py/modbuiltins.c msgid "3-arg pow() not supported" msgstr "3-argümanlı pow() desteklenmemektedir" #: shared-module/msgpack/__init__.c msgid "64 bit types" msgstr "64 bit tipler" #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c #: ports/atmel-samd/common-hal/countio/Counter.c #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c msgid "A hardware interrupt channel is already in use" msgstr "Bir donanım kesme kanalı halihazırda kullanılmaktadır" #: ports/espressif/common-hal/analogio/AnalogIn.c msgid "ADC2 is being used by WiFi" msgstr "ADC2, WiFi tarafından kullanılmaktadır" #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "Adres %d byte uzunluğunda olmalıdır" #: ports/espressif/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "Tüm CAN çevre birimleri kullanımda" #: ports/espressif/common-hal/busio/I2C.c #: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c #: ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Tüm I2C çevre birimleri kullanımda" #: ports/espressif/common-hal/countio/Counter.c #: ports/espressif/common-hal/frequencyio/FrequencyIn.c #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "Tüm PCNT birimleri kullanımda" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/espressif/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "Tüm RX FIFO'ları kullanımda" #: ports/espressif/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "Tüm SPI çevre birimleri kullanımda" #: ports/espressif/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/raspberrypi/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "Tüm UART çevre birimleri kullanımda" #: ports/nrf/common-hal/countio/Counter.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/rotaryio/IncrementalEncoder.c #: shared-bindings/pwmio/PWMOut.c msgid "All channels in use" msgstr "Tüm kanallar kullanımda" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "All event channels in use" msgstr "Tüm olay kanalları kullanımda" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "All state machines in use" msgstr "Tüm durum makineleri kullanımda" #: ports/atmel-samd/audio_dma.c msgid "All sync event channels in use" msgstr "Tüm asenkron olay kanalları kullanımda" #: shared-bindings/pwmio/PWMOut.c msgid "All timers for this pin are in use" msgstr "Bu pin için tüm zamanlayıcılar kullanımda" #: ports/atmel-samd/common-hal/_pew/PewPew.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/espressif/common-hal/frequencyio/FrequencyIn.c #: ports/espressif/common-hal/neopixel_write/__init__.c #: ports/espressif/common-hal/pulseio/PulseIn.c #: ports/espressif/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c msgid "All timers in use" msgstr "Tüm zamanlayıcılar kullanımda" #: ports/espressif/common-hal/_bleio/Adapter.c #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Already advertising." msgstr "Halihazırda duyuruluyor." #: ports/atmel-samd/common-hal/canio/Listener.c msgid "Already have all-matches listener" msgstr "" #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" msgstr "Halihazırda çalışıyor" #: ports/espressif/common-hal/wifi/Radio.c msgid "Already scanning for wifi networks" msgstr "Halihazırda wifi ağları için tarama yapılıyor" #: ports/stm/common-hal/audiopwmio/PWMAudioOut.c msgid "Another PWMAudioOut is already active" msgstr "Başka bir PWMAudioOut zaten aktif durumda" #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c msgid "Another send is already active" msgstr "Başka bir gönderme zaten aktif" #: shared-bindings/pulseio/PulseOut.c msgid "Array must contain halfwords (type 'H')" msgstr "Dizi yarımsözcüklere sahip olmalıdır (tip 'H')" #: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Dizi değerleri tekil bytelar olmalıdır." #: shared-bindings/microcontroller/Pin.c msgid "At most %d %q may be specified (not %d)" msgstr "En az %d %q belirtilmeli (%d değil)" #: shared-module/memorymonitor/AllocationAlarm.c #, c-format msgid "Attempt to allocate %d blocks" msgstr "%d bloğun ayrılması girişimi" #: supervisor/shared/safe_mode.c msgid "Attempted heap allocation when VM not running." msgstr "VM çalışmazken heap'ten alan tahsis edilmeye çalışıldı." #: ports/raspberrypi/audio_dma.c msgid "Audio conversion not implemented" msgstr "Ses dönüşümü implemente edilmedi" #: shared-bindings/wifi/Radio.c msgid "AuthMode.OPEN is not used with password" msgstr "AuthMode.OPEN bir şifre ile kullanılmadı" #: shared-bindings/wifi/Radio.c supervisor/shared/web_workflow/web_workflow.c msgid "Authentication failure" msgstr "Kimlik doğrulama hatası" #: main.c msgid "Auto-reload is off.\n" msgstr "Otomatik yeniden yükleme devre dışı.\n" #: main.c msgid "" "Auto-reload is on. Simply save files over USB to run them or enter REPL to " "disable.\n" msgstr "" "Otomatik yeniden yükleme aktif. Dosyaları çalıştırmak için USB aracılığı ile " "kaydedin ya da deaktif etmek için REPL moda girin.\n" #: ports/espressif/common-hal/canio/CAN.c msgid "Baudrate not supported by peripheral" msgstr "Baudhızı, çevre birimi tarafından desteklenmiyor" #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" msgstr "Minimum kare hızından altında" #: ports/raspberrypi/common-hal/audiobusio/I2SOut.c msgid "Bit clock and word select must be sequential pins" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Bit clock and word select must share a clock unit" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bit derinliği 8'in katı olacak şekilde olmalı." #: shared-bindings/bitmaptools/__init__.c #, fuzzy msgid "Bitmap size and bits per value must match" msgstr "Bitmap boyutu ve bit başına değer uyuşmalı" #: supervisor/shared/safe_mode.c msgid "Boot device must be first device (interface #0)." msgstr "Önyükleme cihazı ilk cihaz olmalı (arayüz #0)." #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Both RX and TX required for flow control" msgstr "Hem RX hem de TX akış kontrolü için gerekli" #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c msgid "Both pins must support hardware interrupts" msgstr "" #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c #: shared-bindings/is31fl3741/FrameBuffer.c #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "Brightness must be 0-1.0" msgstr "Parlaklık 0-1.0 aralığında olmalı" #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Brightness not adjustable" msgstr "Parlaklık ayarlanabilir değil" #: shared-bindings/_bleio/UUID.c #, c-format msgid "Buffer + offset too small %d %d %d" msgstr "" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Buffer elements must be 4 bytes long or less" msgstr "" #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Buffer is not a bytearray." msgstr "Arabellek bayt dizisi değil" #: ports/cxd56/common-hal/camera/Camera.c shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Buffer is too small" msgstr "Arabellek çok küçük" #: ports/stm/common-hal/audiopwmio/PWMAudioOut.c #, c-format msgid "Buffer length %d too big. It must be less than %d" msgstr "Mevcut arabellek boyutu %d çok büyük. En fazla %d kadar olmalı" #: ports/atmel-samd/common-hal/sdioio/SDCard.c #: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c msgid "Buffer length must be a multiple of 512" msgstr "Arabellek boyutu 512'nin katı olmalı" #: ports/stm/common-hal/sdioio/SDCard.c shared-bindings/floppyio/__init__.c msgid "Buffer must be a multiple of 512 bytes" msgstr "" #: shared-bindings/_bleio/PacketBuffer.c #, c-format msgid "Buffer too short by %d bytes" msgstr "" #: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c msgid "Buffers must be same size" msgstr "Arabellek boyutları aynı olmalı" #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c #: ports/raspberrypi/common-hal/paralleldisplay/ParallelBus.c #, c-format msgid "Bus pin %d is already in use" msgstr "Veriyolu pini %d kullanımda" #: shared-bindings/_bleio/UUID.c msgid "Byte buffer must be 16 bytes." msgstr "" #: shared-bindings/aesio/aes.c msgid "CBC blocks must be multiples of 16 bytes" msgstr "CBC blokları 16 baytın katları şeklinde olmalı" #: supervisor/shared/safe_mode.c msgid "CIRCUITPY drive could not be found or created." msgstr "CIRCUITPY sürücüsü bulunamadı veya oluşturulamadı" #: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c msgid "CRC or checksum was invalid" msgstr "" #: py/objtype.c msgid "Call super().__init__() before accessing native object." msgstr "" #: ports/cxd56/common-hal/camera/Camera.c msgid "Camera init" msgstr "" #: ports/espressif/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on RTC IO from deep sleep." msgstr "" #: ports/espressif/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on one low pin while others alarm high from deep sleep." msgstr "" #: ports/espressif/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on two low pins from deep sleep." msgstr "" #: ports/espressif/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "Can't set CCCD on local Characteristic" msgstr "" #: shared-bindings/storage/__init__.c shared-bindings/usb_cdc/__init__.c #: shared-bindings/usb_hid/__init__.c shared-bindings/usb_midi/__init__.c msgid "Cannot change USB devices now" msgstr "USB aygıtları şu an değiştirilemez" #: shared-bindings/_bleio/Adapter.c msgid "Cannot create a new Adapter; use _bleio.adapter;" msgstr "Yeni Adapter oluşturulamaz, _bleio.adapter; kullanın" #: shared-bindings/displayio/Bitmap.c #: shared-bindings/memorymonitor/AllocationSize.c #: shared-bindings/pulseio/PulseIn.c msgid "Cannot delete values" msgstr "Değerler silinemez" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c #: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "" #: ports/nrf/common-hal/microcontroller/Processor.c msgid "Cannot get temperature" msgstr "" #: shared-bindings/_bleio/Adapter.c msgid "Cannot have scan responses for extended, connectable advertisements." msgstr "" #: ports/espressif/common-hal/alarm/pin/PinAlarm.c msgid "Cannot pull on input-only pin." msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "Cannot record to a file" msgstr "" #: shared-module/storage/__init__.c msgid "Cannot remount '/' when visible via USB." msgstr "" #: ports/atmel-samd/common-hal/microcontroller/__init__.c #: ports/cxd56/common-hal/microcontroller/__init__.c #: ports/mimxrt10xx/common-hal/microcontroller/__init__.c msgid "Cannot reset into bootloader because no bootloader is present" msgstr "" #: ports/espressif/common-hal/socketpool/Socket.c msgid "Cannot set socket options" msgstr "" #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" #: ports/espressif/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "" #: py/objslice.c msgid "Cannot subclass slice" msgstr "" #: shared-module/bitbangio/SPI.c msgid "Cannot transfer without MOSI and MISO pins" msgstr "" #: shared-bindings/pwmio/PWMOut.c msgid "Cannot vary frequency on a timer that is already in use" msgstr "" #: ports/nrf/common-hal/alarm/pin/PinAlarm.c msgid "Cannot wake on pin edge, only level" msgstr "" #: ports/espressif/common-hal/alarm/pin/PinAlarm.c msgid "Cannot wake on pin edge. Only level." msgstr "" #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "CharacteristicBuffer writing not provided" msgstr "" #: supervisor/shared/safe_mode.c msgid "CircuitPython core code crashed hard. Whoops!\n" msgstr "" #: supervisor/shared/safe_mode.c msgid "CircuitPython was unable to allocate the heap." msgstr "" #: shared-module/bitbangio/I2C.c msgid "Clock stretch too long" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Clock unit in use" msgstr "" #: shared-bindings/_bleio/Connection.c msgid "" "Connection has been disconnected and can no longer be used. Create a new " "connection." msgstr "" #: py/persistentcode.c msgid "Corrupt .mpy file" msgstr "" #: ports/espressif/common-hal/neopixel_write/__init__.c msgid "Could not retrieve clock" msgstr "" #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "" #: shared-bindings/pwmio/PWMOut.c msgid "Could not start PWM" msgstr "" #: ports/stm/common-hal/busio/UART.c msgid "Could not start interrupt, RX busy" msgstr "" #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" #: supervisor/shared/safe_mode.c msgid "Crash into the HardFault_Handler." msgstr "" #: ports/stm/common-hal/analogio/AnalogOut.c msgid "DAC Channel Init Error" msgstr "" #: ports/stm/common-hal/analogio/AnalogOut.c msgid "DAC Device Init Error" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "" #: ports/atmel-samd/common-hal/paralleldisplay/ParallelBus.c #: ports/nrf/common-hal/paralleldisplay/ParallelBus.c msgid "Data 0 pin must be byte aligned" msgstr "" #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" msgstr "" #: ports/espressif/common-hal/_bleio/Adapter.c #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Data not supported with directed advertising" msgstr "" #: ports/espressif/common-hal/_bleio/Adapter.c #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Data too large for advertisement packet" msgstr "" #: ports/stm/common-hal/alarm/pin/PinAlarm.c msgid "Deep sleep pins must use a rising edge with pulldown" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "Destination capacity is smaller than destination_length." msgstr "" #: ports/nrf/common-hal/audiobusio/I2SOut.c msgid "Device in use" msgstr "" #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Display must have a 16 bit colorspace." msgstr "" #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Display rotation must be in 90 degree increments" msgstr "" #: shared-bindings/digitalio/DigitalInOut.c msgid "Drive mode not used when direction is input." msgstr "" #: shared-bindings/aesio/aes.c msgid "ECB only operates on 16 bytes at a time" msgstr "" #: ports/espressif/common-hal/busio/SPI.c #: ports/espressif/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c msgid "EXTINT channel already in use" msgstr "" #: shared-module/synthio/MidiTrack.c #, c-format msgid "Error in MIDI stream at position %d" msgstr "" #: extmod/modure.c msgid "Error in regex" msgstr "" #: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c #: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c msgid "Expected a %q" msgstr "" #: shared-bindings/alarm/__init__.c msgid "Expected an alarm" msgstr "" #: ports/espressif/common-hal/_bleio/Adapter.c #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Extended advertisements with scan response not supported." msgstr "" #: extmod/ulab/code/numpy/fft/fft_tools.c msgid "FFT is defined for ndarrays only" msgstr "" #: extmod/ulab/code/numpy/fft/fft_tools.c msgid "FFT is implemented for linear arrays only" msgstr "" #: ports/espressif/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "" #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "" #: ports/nrf/sd_mutex.c #, c-format msgid "Failed to acquire mutex, err 0x%04x" msgstr "" #: shared-module/rgbmatrix/RGBMatrix.c msgid "Failed to allocate %q buffer" msgstr "" #: ports/espressif/common-hal/wifi/__init__.c msgid "Failed to allocate Wifi memory" msgstr "" #: ports/espressif/common-hal/wifi/ScannedNetworks.c msgid "Failed to allocate wifi scan memory" msgstr "" #: ports/stm/common-hal/audiopwmio/PWMAudioOut.c msgid "Failed to buffer the sample" msgstr "" #: ports/espressif/common-hal/_bleio/Adapter.c #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: timeout" msgstr "" #: ports/espressif/common-hal/wifi/__init__.c msgid "Failed to init wifi" msgstr "" #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "" #: ports/nrf/sd_mutex.c #, c-format msgid "Failed to release mutex, err 0x%04x" msgstr "" #: supervisor/shared/safe_mode.c msgid "Failed to write internal flash." msgstr "" #: supervisor/shared/safe_mode.c msgid "Fatal error." msgstr "" #: py/moduerrno.c msgid "File exists" msgstr "" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/espressif/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "" #: ports/espressif/common-hal/dualbank/__init__.c msgid "Firmware image is invalid" msgstr "" #: shared-bindings/bitmaptools/__init__.c msgid "For L8 colorspace, input bitmap must have 8 bits per pixel" msgstr "" #: shared-bindings/bitmaptools/__init__.c msgid "For RGB colorspaces, input bitmap must have 16 bits per pixel" msgstr "" #: ports/cxd56/common-hal/camera/Camera.c msgid "Format not supported" msgstr "" #: ports/mimxrt10xx/common-hal/microcontroller/Processor.c msgid "" "Frequency must be 24, 150, 396, 450, 528, 600, 720, 816, 912, 960 or 1008 Mhz" msgstr "" #: shared-bindings/pwmio/PWMOut.c msgid "Frequency must match existing PWMOut using this timer" msgstr "" #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" msgstr "" #: ports/cxd56/common-hal/gnss/GNSS.c msgid "GNSS init" msgstr "" #: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c msgid "Generic Failure" msgstr "" #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Group already used" msgstr "" #: ports/atmel-samd/common-hal/busio/SPI.c ports/cxd56/common-hal/busio/SPI.c #: ports/espressif/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c #: ports/raspberrypi/common-hal/busio/SPI.c msgid "Half duplex SPI is not implemented" msgstr "" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c #: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c #: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "" #: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Hardware in use, try alternative pins" msgstr "" #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "" #: ports/stm/common-hal/busio/I2C.c msgid "I2C init error" msgstr "" #: ports/raspberrypi/common-hal/busio/I2C.c msgid "I2C peripheral in use" msgstr "" #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "" #: shared-bindings/aesio/aes.c #, c-format msgid "IV must be %d bytes long" msgstr "" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "In-buffer elements must be <= 4 bytes long" msgstr "" #: py/persistentcode.c msgid "" "Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/" "mpy-update for more info." msgstr "" #: shared-bindings/_pew/PewPew.c msgid "Incorrect buffer size" msgstr "" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Init program size invalid" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Initial set pin direction conflicts with initial out pin direction" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Initial set pin state conflicts with initial out pin state" msgstr "" #: ports/espressif/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "" #: shared-bindings/bitops/__init__.c #, c-format msgid "Input buffer length (%d) must be a multiple of the strand count (%d)" msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "" #: ports/espressif/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d shifts in more bits than pin count" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d shifts out more bits than pin count" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d uses extra pin" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d waits on input outside of count" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient encryption" msgstr "" #: ports/espressif/common-hal/wifi/Radio.c msgid "Interface must be started" msgstr "" #: ports/atmel-samd/audio_dma.c ports/raspberrypi/audio_dma.c msgid "Internal audio buffer too small" msgstr "" #: ports/stm/common-hal/busio/UART.c msgid "Internal define error" msgstr "" #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c msgid "Internal error" msgstr "" #: shared-module/rgbmatrix/RGBMatrix.c #, c-format msgid "Internal error #%d" msgstr "" #: supervisor/shared/safe_mode.c msgid "Internal watchdog timer expired." msgstr "" #: py/argcheck.c msgid "Invalid %q" msgstr "" #: shared-bindings/microcontroller/Pin.c msgid "Invalid %q pin" msgstr "" #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Invalid ADC Unit value" msgstr "" #: ports/espressif/common-hal/_bleio/__init__.c #: ports/nrf/common-hal/_bleio/__init__.c msgid "Invalid BLE parameter" msgstr "" #: shared-bindings/wifi/Radio.c msgid "Invalid BSSID" msgstr "" #: shared-bindings/wifi/Radio.c msgid "Invalid MAC address" msgstr "" #: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c #: py/moduerrno.c msgid "Invalid argument" msgstr "" #: shared-module/displayio/Bitmap.c msgid "Invalid bits per value" msgstr "" #: ports/atmel-samd/common-hal/imagecapture/ParallelImageCapture.c #, c-format msgid "Invalid data_pins[%d]" msgstr "" #: shared-module/audiocore/WaveFile.c msgid "Invalid format chunk size" msgstr "" #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" #: ports/espressif/common-hal/wifi/Radio.c msgid "Invalid multicast MAC address" msgstr "" #: shared-bindings/busio/UART.c msgid "Invalid pins" msgstr "" #: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c msgid "Invalid size" msgstr "" #: ports/espressif/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "" #: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c msgid "Invalid state" msgstr "" #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "" #: shared-module/is31fl3741/FrameBuffer.c msgid "LED mappings must match display size" msgstr "" #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "" #: shared-module/displayio/Group.c msgid "Layer already in a group" msgstr "" #: shared-module/displayio/Group.c msgid "Layer must be a Group or TileGrid subclass" msgstr "" #: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c msgid "MAC address was invalid" msgstr "" #: shared-bindings/is31fl3741/IS31FL3741.c msgid "Mapping must be a tuple" msgstr "" #: shared-module/displayio/Shape.c #, c-format msgid "Maximum x value when mirrored is %d" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Mismatched data size" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Mismatched swap flag" msgstr "" #: ports/mimxrt10xx/common-hal/busio/SPI.c msgid "Missing MISO or MOSI Pin" msgstr "" #: ports/stm/common-hal/busio/SPI.c msgid "Missing MISO or MOSI pin" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_in_pin. Instruction %d reads pin(s)" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_in_pin. Instruction %d waits based on pin" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_out_pin. Instruction %d writes pin(s)" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_set_pin. Instruction %d sets pin(s)" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing jmp_pin. Instruction %d jumps on pin" msgstr "" #: shared-bindings/busio/UART.c shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" #: ports/mimxrt10xx/common-hal/busio/SPI.c shared-bindings/busio/SPI.c msgid "Must provide MISO or MOSI pin" msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Must use a multiple of 6 rgb pins, not %d" msgstr "" #: supervisor/shared/safe_mode.c msgid "NLR jump failed. Likely memory corruption." msgstr "" #: ports/espressif/common-hal/nvm/ByteArray.c msgid "NVS Error" msgstr "" #: py/qstr.c msgid "Name too long" msgstr "" #: shared-bindings/displayio/TileGrid.c msgid "New bitmap must be same size as old bitmap" msgstr "" #: ports/espressif/common-hal/_bleio/__init__.c msgid "Nimble out of memory" msgstr "" #: ports/espressif/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/raspberrypi/common-hal/audiobusio/I2SOut.c #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "No DMA channel found" msgstr "" #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "No DMA pacing timer found" msgstr "" #: shared-module/adafruit_bus_device/i2c_device/I2CDevice.c #, c-format msgid "No I2C device at address: 0x%x" msgstr "" #: supervisor/shared/web_workflow/web_workflow.c msgid "No IP" msgstr "" #: ports/espressif/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "" #: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c msgid "No MISO pin" msgstr "" #: ports/espressif/common-hal/busio/SPI.c #: ports/mimxrt10xx/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "" #: ports/stm/common-hal/busio/SPI.c shared-module/bitbangio/SPI.c msgid "No MOSI pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/espressif/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/espressif/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "No available clocks" msgstr "" #: ports/espressif/common-hal/imagecapture/ParallelImageCapture.c msgid "No capture in progress" msgstr "" #: shared-bindings/_bleio/PacketBuffer.c msgid "No connection: length cannot be determined" msgstr "" #: shared-bindings/board/__init__.c msgid "No default %q bus" msgstr "" #: ports/atmel-samd/common-hal/touchio/TouchIn.c msgid "No free GCLKs" msgstr "" #: shared-bindings/os/__init__.c msgid "No hardware random available" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "No in in program" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "No in or out in program" msgstr "" #: shared-bindings/aesio/aes.c msgid "No key was specified" msgstr "" #: shared-bindings/time/__init__.c msgid "No long integer support" msgstr "" #: shared-module/usb_hid/__init__.c #, c-format msgid "No more than %d HID devices allowed" msgstr "" #: shared-bindings/wifi/Radio.c msgid "No network with that ssid" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "No out in program" msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c #: ports/espressif/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c #: ports/raspberrypi/common-hal/busio/I2C.c msgid "No pull up found on SDA or SCL; check your wiring" msgstr "" #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" #: py/moduerrno.c msgid "No space left on device" msgstr "" #: py/moduerrno.c msgid "No such device" msgstr "" #: py/moduerrno.c msgid "No such file/directory" msgstr "" #: shared-module/rgbmatrix/RGBMatrix.c msgid "No timer available" msgstr "" #: supervisor/shared/safe_mode.c msgid "Nordic system firmware failure assertion." msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Nordic system firmware out of memory" msgstr "" #: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c msgid "Not a valid IP string" msgstr "" #: ports/espressif/common-hal/_bleio/__init__.c #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" msgstr "" #: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c #: shared-bindings/audiopwmio/PWMAudioOut.c msgid "Not playing" msgstr "" #: shared-bindings/_bleio/__init__.c msgid "Not settable" msgstr "" #: ports/espressif/common-hal/paralleldisplay/ParallelBus.c #, c-format msgid "Number of data_pins must be 8 or 16, not %d" msgstr "" #: shared-bindings/util.c msgid "" "Object has been deinitialized and can no longer be used. Create a new object." msgstr "" #: ports/nrf/common-hal/busio/UART.c msgid "Odd parity is not supported" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c #: ports/raspberrypi/common-hal/audiobusio/PDMIn.c msgid "Only 8 or 16 bit mono with " msgstr "" #: ports/espressif/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "" #: ports/espressif/common-hal/socketpool/SocketPool.c msgid "Only IPv4 sockets supported" msgstr "" #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" "Only Windows format, uncompressed BMP supported: given header size is %d" msgstr "" #: shared-bindings/_bleio/Adapter.c msgid "Only connectable advertisements can be directed" msgstr "" #: ports/stm/common-hal/alarm/pin/PinAlarm.c msgid "Only edge detection is available on this hardware" msgstr "" #: shared-bindings/ipaddress/__init__.c msgid "Only int or string supported for ip" msgstr "" #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" "Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: " "%d bpp given" msgstr "" #: ports/espressif/common-hal/alarm/touch/TouchAlarm.c msgid "Only one TouchAlarm can be set in deep sleep." msgstr "" #: ports/espressif/common-hal/i2cperipheral/I2CPeripheral.c msgid "Only one address is allowed" msgstr "" #: ports/atmel-samd/common-hal/alarm/time/TimeAlarm.c #: ports/nrf/common-hal/alarm/time/TimeAlarm.c #: ports/stm/common-hal/alarm/time/TimeAlarm.c msgid "Only one alarm.time alarm can be set" msgstr "" #: ports/espressif/common-hal/alarm/time/TimeAlarm.c #: ports/raspberrypi/common-hal/alarm/time/TimeAlarm.c msgid "Only one alarm.time alarm can be set." msgstr "" #: shared-module/displayio/ColorConverter.c msgid "Only one color can be transparent at a time" msgstr "" #: py/moduerrno.c msgid "Operation not permitted" msgstr "" #: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c msgid "Operation or feature not supported" msgstr "" #: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c msgid "Operation timed out" msgstr "" #: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c msgid "Out of memory" msgstr "" #: ports/espressif/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Out-buffer elements must be <= 4 bytes long" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "PDMIn not available" msgstr "" #: shared-bindings/pwmio/PWMOut.c msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "PWM restart" msgstr "" #: ports/raspberrypi/common-hal/countio/Counter.c msgid "PWM slice already in use" msgstr "" #: ports/raspberrypi/common-hal/countio/Counter.c msgid "PWM slice channel A already in use" msgstr "" #: ports/espressif/common-hal/audiobusio/__init__.c msgid "Peripheral in use" msgstr "" #: py/moduerrno.c msgid "Permission denied" msgstr "" #: ports/stm/common-hal/alarm/pin/PinAlarm.c msgid "Pin cannot wake from Deep Sleep" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Pin count too large" msgstr "" #: ports/stm/common-hal/alarm/pin/PinAlarm.c #: ports/stm/common-hal/pulseio/PulseIn.c msgid "Pin interrupt already in use" msgstr "" #: shared-bindings/adafruit_bus_device/spi_device/SPIDevice.c #: shared-bindings/digitalio/DigitalInOut.c msgid "Pin is input only" msgstr "" #: ports/raspberrypi/common-hal/countio/Counter.c msgid "Pin must be on PWM Channel B" msgstr "" #: ports/atmel-samd/common-hal/countio/Counter.c msgid "Pin must support hardware interrupts" msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "" "Pinout uses %d bytes per element, which consumes more than the ideal %d " "bytes. If this cannot be avoided, pass allow_inefficient=True to the " "constructor" msgstr "" #: ports/raspberrypi/common-hal/imagecapture/ParallelImageCapture.c msgid "Pins must be sequential" msgstr "" #: ports/raspberrypi/common-hal/rotaryio/IncrementalEncoder.c msgid "Pins must be sequential GPIO pins" msgstr "" #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "Pins must share PWM slice" msgstr "" #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "" #: shared-module/vectorio/Polygon.c msgid "Polygon needs at least 3 points" msgstr "" #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" #: main.c msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n" msgstr "" "REPL moda girmek için herhangi bir tuşa basınız. Programı yeniden yüklemek " "için CTRL+D tuş kombinasyonunu kullanabilirsiniz.\n" #: main.c msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "" "Alarma, CTRL-C'ye veya dosya yazana kadar derin uyku moduna geçiliyor.\n" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Program does IN without loading ISR" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Program does OUT without loading OSR" msgstr "" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Program size invalid" msgstr "" #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" #: ports/atmel-samd/common-hal/watchdog/WatchDogTimer.c #: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "RAISE mode is not implemented" msgstr "" #: ports/raspberrypi/common-hal/countio/Counter.c msgid "RISE_AND_FALL not available on this chip" msgstr "" #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" #: ports/stm/common-hal/os/__init__.c msgid "RNG Init Error" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c #: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RS485" msgstr "" #: ports/espressif/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "" #: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c msgid "RTC is not supported on this board" msgstr "" #: ports/stm/common-hal/os/__init__.c msgid "Random number generation error" msgstr "" #: shared-bindings/memorymonitor/AllocationSize.c #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "" #: extmod/vfs_fat.c py/moduerrno.c msgid "Read-only filesystem" msgstr "" #: shared-module/displayio/Bitmap.c msgid "Read-only object" msgstr "" #: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c msgid "Received response was invalid" msgstr "" #: shared-bindings/displayio/EPaperDisplay.c msgid "Refresh too soon" msgstr "" #: shared-bindings/canio/RemoteTransmissionRequest.c msgid "RemoteTransmissionRequests limited to 8 bytes" msgstr "" #: shared-bindings/aesio/aes.c msgid "Requested AES mode is unsupported" msgstr "" #: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c msgid "Requested resource not found" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Right channel unsupported" msgstr "" #: main.c msgid "Running in safe mode! Not running saved code.\n" msgstr "" #: shared-module/sdcardio/SDCard.c msgid "SD card CSD format not supported" msgstr "" #: ports/cxd56/common-hal/sdioio/SDCard.c msgid "SDCard init" msgstr "" #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" msgstr "" #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO Init Error %d" msgstr "" #: ports/espressif/common-hal/busio/SPI.c msgid "SPI configuration failed" msgstr "" #: ports/stm/common-hal/busio/SPI.c msgid "SPI init error" msgstr "" #: ports/raspberrypi/common-hal/busio/SPI.c msgid "SPI peripheral in use" msgstr "" #: ports/stm/common-hal/busio/SPI.c msgid "SPI re-init" msgstr "" #: shared-bindings/is31fl3741/FrameBuffer.c msgid "Scale dimensions must divide by 3" msgstr "" #: ports/espressif/common-hal/_bleio/Adapter.c #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Scan already in progess. Stop with stop_scan." msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Serializer in use" msgstr "" #: shared-bindings/ssl/SSLContext.c msgid "Server side context cannot have hostname" msgstr "" #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "" #: ports/raspberrypi/common-hal/alarm/SleepMemory.c msgid "Sleep Memory not available" msgstr "" #: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" #: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c #: shared-bindings/displayio/TileGrid.c #: shared-bindings/memorymonitor/AllocationSize.c #: shared-bindings/pulseio/PulseIn.c msgid "Slices not supported" msgstr "" #: ports/espressif/common-hal/socketpool/SocketPool.c msgid "SocketPool can only be used with wifi.radio" msgstr "" #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "" #: shared-bindings/paralleldisplay/ParallelBus.c msgid "Specify exactly one of data0 or data_pins" msgstr "" #: extmod/modure.c msgid "Splitting with sub-captures" msgstr "" #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "Stereo left must be on PWM channel A" msgstr "" #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "Stereo right must be on PWM channel B" msgstr "" #: shared-bindings/multiterminal/__init__.c msgid "Stream missing readinto() or write() method." msgstr "" #: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Supply at least one UART pin" msgstr "" #: shared-bindings/alarm/time/TimeAlarm.c msgid "Supply one of monotonic_time or epoch_time" msgstr "" #: shared-bindings/gnss/GNSS.c msgid "System entry must be gnss.SatelliteSystem" msgstr "" #: ports/stm/common-hal/microcontroller/Processor.c msgid "Temperature read timed out" msgstr "" #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" "Increase the stack size if you know how. If not:" msgstr "" #: supervisor/shared/safe_mode.c msgid "" "The `microcontroller` module was used to boot into safe mode. Press reset to " "exit safe mode." msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30" msgstr "" #: supervisor/shared/safe_mode.c msgid "" "The microcontroller's power dipped. Make sure your power supply provides\n" "enough power for the whole circuit and press reset (after ejecting " "CIRCUITPY)." msgstr "" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's bits_per_sample does not match the mixer's" msgstr "" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's channel count does not match the mixer's" msgstr "" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's sample rate does not match the mixer's" msgstr "" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's signedness does not match the mixer's" msgstr "" #: shared-module/imagecapture/ParallelImageCapture.c msgid "This microcontroller does not support continuous capture." msgstr "" #: shared-module/paralleldisplay/ParallelBus.c msgid "" "This microcontroller only supports data0=, not data_pins=, because it " "requires contiguous pins." msgstr "" #: shared-bindings/displayio/TileGrid.c msgid "Tile height must exactly divide bitmap height" msgstr "" #: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c msgid "Tile index out of bounds" msgstr "" #: shared-bindings/displayio/TileGrid.c msgid "Tile width must exactly divide bitmap width" msgstr "" #: shared-bindings/alarm/time/TimeAlarm.c msgid "Time is in the past." msgstr "" #: ports/espressif/common-hal/_bleio/Adapter.c #: ports/nrf/common-hal/_bleio/Adapter.c #, c-format msgid "Timeout is too long: Maximum timeout length is %d seconds" msgstr "" #: supervisor/shared/safe_mode.c msgid "To exit, please reset the board without " msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample" msgstr "" #: ports/raspberrypi/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "" #: shared-module/displayio/__init__.c msgid "Too many display busses" msgstr "" #: shared-module/displayio/__init__.c msgid "Too many displays" msgstr "" #: ports/espressif/common-hal/_bleio/PacketBuffer.c #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Total data to write is larger than %q" msgstr "" #: ports/atmel-samd/common-hal/alarm/touch/TouchAlarm.c #: ports/raspberrypi/common-hal/alarm/touch/TouchAlarm.c #: ports/stm/common-hal/alarm/touch/TouchAlarm.c msgid "Touch alarms not available" msgstr "" #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "" #: shared-bindings/time/__init__.c msgid "Tuple or struct_time argument required" msgstr "" #: ports/stm/common-hal/busio/UART.c msgid "UART de-init" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c #: ports/espressif/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "UART init" msgstr "" #: ports/stm/common-hal/busio/UART.c msgid "UART re-init" msgstr "" #: ports/stm/common-hal/busio/UART.c msgid "UART write" msgstr "" #: shared-module/usb_hid/Device.c msgid "USB busy" msgstr "" #: supervisor/shared/safe_mode.c msgid "USB devices need more endpoints than are available." msgstr "" #: supervisor/shared/safe_mode.c msgid "USB devices specify too many interface names." msgstr "" #: shared-module/usb_hid/Device.c msgid "USB error" msgstr "" #: shared-bindings/_bleio/UUID.c msgid "UUID integer value must be 0-0xffff" msgstr "" #: shared-bindings/_bleio/UUID.c msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'" msgstr "" #: shared-bindings/_bleio/UUID.c msgid "UUID value is not str, int or byte buffer" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/raspberrypi/common-hal/audiobusio/I2SOut.c #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "Unable to allocate buffers for signed conversion" msgstr "" #: ports/espressif/common-hal/busio/I2C.c msgid "Unable to create lock" msgstr "" #: shared-module/displayio/I2CDisplay.c shared-module/is31fl3741/IS31FL3741.c #, c-format msgid "Unable to find I2C Display at %x" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Unable to find free GCLK" msgstr "" #: py/parse.c msgid "Unable to init parser" msgstr "" #: shared-module/displayio/OnDiskBitmap.c msgid "Unable to read color palette data" msgstr "" #: ports/espressif/common-hal/mdns/Server.c msgid "Unable to start mDNS query" msgstr "" #: shared-bindings/nvm/ByteArray.c msgid "Unable to write to nvm." msgstr "" #: shared-bindings/alarm/SleepMemory.c msgid "Unable to write to sleep_memory." msgstr "" #: ports/nrf/common-hal/_bleio/UUID.c msgid "Unexpected nrfx uuid type" msgstr "" #: ports/espressif/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "" #: ports/espressif/common-hal/_bleio/__init__.c #, c-format msgid "Unknown BLE error at %s:%d: %d" msgstr "" #: ports/espressif/common-hal/_bleio/__init__.c #, c-format msgid "Unknown BLE error: %d" msgstr "" #: shared-bindings/wifi/Radio.c #, c-format msgid "Unknown failure %d" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" msgstr "" #: ports/atmel-samd/common-hal/alarm/pin/PinAlarm.c #: supervisor/shared/safe_mode.c msgid "Unknown reason." msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown security error: 0x%04x" msgstr "" #: ports/espressif/common-hal/_bleio/__init__.c #, c-format msgid "Unknown system firmware error at %s:%d: %d" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown system firmware error: %04x" msgstr "" #: ports/espressif/common-hal/_bleio/__init__.c #, c-format msgid "Unknown system firmware error: %d" msgstr "" #: shared-bindings/adafruit_pixelbuf/PixelBuf.c #, c-format msgid "Unmatched number of items on RHS (expected %d, got %d)." msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c msgid "" "Unspecified issue. Can be that the pairing prompt on the other device was " "declined or ignored." msgstr "" #: shared-bindings/bitmaptools/__init__.c msgid "Unsupported colorspace" msgstr "" #: shared-module/displayio/display_core.c msgid "Unsupported display bus type" msgstr "" #: shared-module/audiocore/WaveFile.c msgid "Unsupported format" msgstr "" #: shared-bindings/hashlib/__init__.c msgid "Unsupported hash algorithm" msgstr "" #: ports/espressif/common-hal/dualbank/__init__.c msgid "Update Failed" msgstr "" #: ports/espressif/common-hal/_bleio/Characteristic.c #: ports/espressif/common-hal/_bleio/Descriptor.c #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c msgid "Value length != required fixed length" msgstr "" #: ports/espressif/common-hal/_bleio/Characteristic.c #: ports/espressif/common-hal/_bleio/Descriptor.c #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c msgid "Value length > max_length" msgstr "" #: ports/espressif/bindings/espidf/__init__.c ports/espressif/esp_error.c msgid "Version was invalid" msgstr "" #: ports/stm/common-hal/microcontroller/Processor.c msgid "Voltage read timed out" msgstr "" #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "" #: ports/atmel-samd/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c #: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer is not currently running" msgstr "" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET" msgstr "" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer.timeout must be greater than 0" msgstr "" #: py/builtinhelp.c #, c-format msgid "" "Welcome to Adafruit CircuitPython %s!\n" "\n" "Visit circuitpython.org for more information.\n" "\n" "To list built-in modules type `help(\"modules\")`.\n" msgstr "" #: supervisor/shared/web_workflow/web_workflow.c msgid "Wi-Fi: " msgstr "" #: main.c msgid "Woken up by alarm.\n" msgstr "" #: ports/espressif/common-hal/_bleio/PacketBuffer.c #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "" #: supervisor/shared/safe_mode.c msgid "You are in safe mode because:\n" msgstr "" #: supervisor/shared/safe_mode.c msgid "" "You pressed the reset button during boot. Press again to exit safe mode." msgstr "" #: supervisor/shared/safe_mode.c msgid "You requested starting safe mode by " msgstr "" #: py/objtype.c msgid "__init__() should return None" msgstr "" #: py/objtype.c msgid "__init__() should return None, not '%q'" msgstr "" #: py/objobject.c msgid "__new__ arg must be a user-type" msgstr "" #: extmod/modubinascii.c extmod/moduhashlib.c py/objarray.c msgid "a bytes-like object is required" msgstr "" #: shared-bindings/i2cperipheral/I2CPeripheral.c msgid "address out of bounds" msgstr "" #: shared-bindings/i2cperipheral/I2CPeripheral.c msgid "addresses is empty" msgstr "" #: py/compile.c msgid "annotation must be an identifier" msgstr "" #: py/modbuiltins.c msgid "arg is an empty sequence" msgstr "" #: py/objobject.c msgid "arg must be user-type" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "argsort argument must be an ndarray" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "argsort is not implemented for flattened arrays" msgstr "" #: py/runtime.c shared-bindings/supervisor/__init__.c msgid "argument has wrong type" msgstr "" #: py/compile.c msgid "argument name reused" msgstr "" #: py/argcheck.c shared-bindings/_stage/__init__.c #: shared-bindings/digitalio/DigitalInOut.c msgid "argument num/types mismatch" msgstr "" #: py/runtime.c msgid "argument should be a '%q' not a '%q'" msgstr "" #: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/numpy/transform.c msgid "arguments must be ndarrays" msgstr "" #: extmod/ulab/code/ndarray.c msgid "array and index length must be equal" msgstr "" #: extmod/ulab/code/numpy/io/io.c msgid "array has too many dimensions" msgstr "" #: py/objarray.c shared-bindings/alarm/SleepMemory.c #: shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "attempt to get (arg)min/(arg)max of empty sequence" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "attempt to get argmin/argmax of an empty sequence" msgstr "" #: py/objstr.c msgid "attributes not supported yet" msgstr "" #: extmod/ulab/code/ulab_tools.c msgid "axis is out of bounds" msgstr "" #: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c msgid "axis must be None, or an integer" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "axis too long" msgstr "" #: shared-bindings/bitmaptools/__init__.c msgid "background value out of range of target" msgstr "" #: py/builtinevex.c msgid "bad compile mode" msgstr "" #: py/objstr.c msgid "bad conversion specifier" msgstr "" #: py/objstr.c msgid "bad format string" msgstr "" #: py/binary.c py/objarray.c msgid "bad typecode" msgstr "" #: py/emitnative.c msgid "binary op %q not implemented" msgstr "" #: shared-bindings/bitmaptools/__init__.c msgid "bitmap sizes must match" msgstr "" #: extmod/modurandom.c msgid "bits must be 32 or less" msgstr "" #: shared-bindings/audiomixer/Mixer.c msgid "bits_per_sample must be 8 or 16" msgstr "" #: py/emitinlinethumb.c msgid "branch not in range" msgstr "" #: extmod/ulab/code/numpy/create.c extmod/ulab/code/utils/utils.c msgid "buffer is smaller than requested size" msgstr "" #: extmod/ulab/code/numpy/create.c extmod/ulab/code/utils/utils.c msgid "buffer size must be a multiple of element size" msgstr "" #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "buffer slices must be of equal length" msgstr "" #: py/modstruct.c shared-bindings/struct/__init__.c #: shared-module/struct/__init__.c msgid "buffer too small" msgstr "" #: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "" #: shared-bindings/adafruit_pixelbuf/PixelBuf.c msgid "byteorder is not a string" msgstr "" #: py/objarray.c msgid "bytes length not a multiple of item size" msgstr "" #: py/objstr.c msgid "bytes value out of range" msgstr "" #: ports/atmel-samd/bindings/samd/Clock.c msgid "calibration is out of range" msgstr "" #: ports/atmel-samd/bindings/samd/Clock.c msgid "calibration is read only" msgstr "" #: shared-module/vectorio/Circle.c shared-module/vectorio/Polygon.c #: shared-module/vectorio/Rectangle.c msgid "can only have one parent" msgstr "" #: py/emitinlinethumb.c msgid "can only have up to 4 parameters to Thumb assembly" msgstr "" #: py/emitinlinextensa.c msgid "can only have up to 4 parameters to Xtensa assembly" msgstr "" #: py/objtype.c msgid "can't add special method to already-subclassed class" msgstr "" #: py/compile.c msgid "can't assign to expression" msgstr "" #: extmod/moduasyncio.c msgid "can't cancel self" msgstr "" #: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c #: shared-module/adafruit_pixelbuf/PixelBuf.c msgid "can't convert %q to %q" msgstr "" #: py/runtime.c msgid "can't convert %q to int" msgstr "" #: py/obj.c #, c-format msgid "can't convert %s to complex" msgstr "" #: py/objstr.c msgid "can't convert '%q' object to %q implicitly" msgstr "" #: extmod/ulab/code/numpy/vector.c msgid "can't convert complex to float" msgstr "" #: py/obj.c msgid "can't convert to %q" msgstr "" #: py/obj.c msgid "can't convert to complex" msgstr "" #: py/runtime.c msgid "can't convert to int" msgstr "" #: py/objstr.c msgid "can't convert to str implicitly" msgstr "" #: py/compile.c msgid "can't declare nonlocal in outer code" msgstr "" #: py/compile.c msgid "can't delete expression" msgstr "" #: py/emitnative.c msgid "can't do binary op between '%q' and '%q'" msgstr "" #: py/objcomplex.c msgid "can't do truncated division of a complex number" msgstr "" #: py/compile.c msgid "can't have multiple **x" msgstr "" #: py/compile.c msgid "can't have multiple *x" msgstr "" #: py/emitnative.c msgid "can't implicitly convert '%q' to 'bool'" msgstr "" #: py/emitnative.c msgid "can't load from '%q'" msgstr "" #: py/emitnative.c msgid "can't load with '%q' index" msgstr "" #: py/builtinimport.c msgid "can't perform relative import" msgstr "" #: py/objgenerator.c msgid "can't send non-None value to a just-started generator" msgstr "" #: shared-module/sdcardio/SDCard.c msgid "can't set 512 block size" msgstr "" #: py/objnamedtuple.c msgid "can't set attribute" msgstr "" #: py/emitnative.c msgid "can't store '%q'" msgstr "" #: py/emitnative.c msgid "can't store to '%q'" msgstr "" #: py/emitnative.c msgid "can't store with '%q' index" msgstr "" #: py/objstr.c msgid "" "can't switch from automatic field numbering to manual field specification" msgstr "" #: py/objstr.c msgid "" "can't switch from manual field specification to automatic field numbering" msgstr "" #: extmod/ulab/code/ndarray.c msgid "cannot assign new shape" msgstr "" #: extmod/ulab/code/ndarray_operators.c msgid "cannot cast output with casting rule" msgstr "" #: extmod/ulab/code/ndarray.c msgid "cannot convert complex to dtype" msgstr "" #: extmod/ulab/code/ndarray.c msgid "cannot convert complex type" msgstr "" #: py/objtype.c msgid "cannot create '%q' instances" msgstr "" #: py/objtype.c msgid "cannot create instance" msgstr "" #: py/runtime.c msgid "cannot import name %q" msgstr "" #: extmod/moductypes.c msgid "cannot unambiguously get sizeof scalar" msgstr "" #: py/emitnative.c msgid "casting" msgstr "" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "channel re-init" msgstr "" #: shared-bindings/_stage/Text.c msgid "chars buffer too small" msgstr "" #: py/modbuiltins.c msgid "chr() arg not in range(0x110000)" msgstr "" #: py/modbuiltins.c msgid "chr() arg not in range(256)" msgstr "" #: shared-bindings/bitmaptools/__init__.c msgid "clip point must be (x,y) tuple" msgstr "" #: shared-bindings/msgpack/ExtType.c msgid "code outside range 0~127" msgstr "" #: shared-bindings/displayio/Palette.c msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)" msgstr "" #: shared-bindings/displayio/Palette.c msgid "color buffer must be a buffer, tuple, list, or int" msgstr "" #: shared-bindings/displayio/Palette.c msgid "color buffer must be a bytearray or array of type 'b' or 'B'" msgstr "" #: shared-bindings/displayio/Palette.c msgid "color must be between 0x000000 and 0xffffff" msgstr "" #: shared-bindings/displayio/ColorConverter.c msgid "color should be an int" msgstr "" #: py/emitnative.c msgid "comparison of int and uint" msgstr "" #: py/objcomplex.c msgid "complex division by zero" msgstr "" #: py/objfloat.c py/parsenum.c msgid "complex values not supported" msgstr "" #: extmod/moduzlib.c msgid "compression header" msgstr "" #: py/parse.c msgid "constant must be an integer" msgstr "" #: py/emitnative.c msgid "conversion to object" msgstr "" #: extmod/ulab/code/numpy/filter.c msgid "convolve arguments must be linear arrays" msgstr "" #: extmod/ulab/code/numpy/filter.c msgid "convolve arguments must be ndarrays" msgstr "" #: extmod/ulab/code/numpy/filter.c msgid "convolve arguments must not be empty" msgstr "" #: extmod/ulab/code/numpy/io/io.c msgid "corrupted file" msgstr "" #: extmod/ulab/code/numpy/poly.c msgid "could not invert Vandermonde matrix" msgstr "" #: shared-module/sdcardio/SDCard.c msgid "couldn't determine SD card version" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "cross is defined for 1D arrays of length 3" msgstr "" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "data must be iterable" msgstr "" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "data must be of equal length" msgstr "" #: ports/atmel-samd/common-hal/imagecapture/ParallelImageCapture.c #, c-format msgid "data pin #%d in use" msgstr "" #: extmod/ulab/code/ndarray.c msgid "data type not understood" msgstr "" #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" #: py/compile.c msgid "default 'except' must be last" msgstr "" #: shared-bindings/msgpack/__init__.c msgid "default is not a function" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "" "destination buffer must be a bytearray or array of type 'B' for bit_depth = 8" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "destination buffer must be an array of type 'H' for bit_depth = 16" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "destination_length must be an int >= 0" msgstr "" #: py/objdict.c msgid "dict update sequence has wrong length" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "diff argument must be an ndarray" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "differentiation order out of range" msgstr "" #: extmod/ulab/code/numpy/transform.c msgid "dimensions do not match" msgstr "" #: py/emitnative.c msgid "div/mod not implemented for uint" msgstr "" #: py/objfloat.c py/objint_mpz.c msgid "divide by zero" msgstr "" #: py/modmath.c py/objint_longlong.c py/runtime.c #: shared-bindings/math/__init__.c msgid "division by zero" msgstr "" #: extmod/ulab/code/numpy/vector.c msgid "dtype must be float, or complex" msgstr "" #: py/objdeque.c msgid "empty" msgstr "" #: extmod/ulab/code/numpy/io/io.c msgid "empty file" msgstr "" #: extmod/moduasyncio.c extmod/moduheapq.c extmod/modutimeq.c msgid "empty heap" msgstr "" #: py/objstr.c msgid "empty separator" msgstr "" #: shared-bindings/random/__init__.c msgid "empty sequence" msgstr "" #: py/objstr.c msgid "end of format while looking for conversion specifier" msgstr "" #: shared-bindings/displayio/Shape.c msgid "end_x should be an int" msgstr "" #: shared-bindings/alarm/time/TimeAlarm.c msgid "epoch_time not supported on this board" msgstr "" #: ports/nrf/common-hal/busio/UART.c #, c-format msgid "error = 0x%08lX" msgstr "" #: py/runtime.c msgid "exceptions must derive from BaseException" msgstr "" #: shared-bindings/canio/CAN.c msgid "expected '%q' but got '%q'" msgstr "" #: shared-bindings/canio/CAN.c msgid "expected '%q' or '%q' but got '%q'" msgstr "" #: py/objstr.c msgid "expected ':' after format specifier" msgstr "" #: py/obj.c msgid "expected tuple/list" msgstr "" #: py/modthread.c msgid "expecting a dict for keyword args" msgstr "" #: py/compile.c msgid "expecting an assembler instruction" msgstr "" #: py/compile.c msgid "expecting just a value for set" msgstr "" #: py/compile.c msgid "expecting key:value for dict" msgstr "" #: shared-bindings/msgpack/__init__.c msgid "ext_hook is not a function" msgstr "" #: py/argcheck.c msgid "extra keyword arguments given" msgstr "" #: py/argcheck.c msgid "extra positional arguments given" msgstr "" #: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c #: shared-bindings/displayio/OnDiskBitmap.c shared-bindings/synthio/__init__.c #: shared-module/gifio/GifWriter.c msgid "file must be a file opened in byte mode" msgstr "" #: shared-bindings/traceback/__init__.c msgid "file write is not available" msgstr "" #: shared-bindings/storage/__init__.c msgid "filesystem must provide mount method" msgstr "" #: extmod/ulab/code/numpy/vector.c msgid "first argument must be a callable" msgstr "" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "first argument must be a function" msgstr "" #: extmod/ulab/code/numpy/create.c msgid "first argument must be a tuple of ndarrays" msgstr "" #: extmod/ulab/code/numpy/transform.c extmod/ulab/code/numpy/vector.c msgid "first argument must be an ndarray" msgstr "" #: py/objtype.c msgid "first argument to super() must be type" msgstr "" #: extmod/ulab/code/scipy/linalg/linalg.c msgid "first two arguments must be ndarrays" msgstr "" #: extmod/ulab/code/ndarray.c msgid "flattening order must be either 'C', or 'F'" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "flip argument must be an ndarray" msgstr "" #: py/objint.c msgid "float too big" msgstr "" #: py/nativeglue.c msgid "float unsupported" msgstr "" #: shared-bindings/_stage/Text.c msgid "font must be 2048 bytes long" msgstr "" #: py/objstr.c msgid "format requires a dict" msgstr "" #: shared-bindings/microcontroller/Processor.c msgid "frequency is read-only for this board" msgstr "" #: py/objdeque.c msgid "full" msgstr "" #: py/argcheck.c msgid "function doesn't take keyword arguments" msgstr "" #: py/argcheck.c #, c-format msgid "function expected at most %d arguments, got %d" msgstr "" #: py/bc.c py/objnamedtuple.c msgid "function got multiple values for argument '%q'" msgstr "" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "function has the same sign at the ends of interval" msgstr "" #: extmod/ulab/code/ndarray.c msgid "function is defined for ndarrays only" msgstr "" #: extmod/ulab/code/numpy/carray/carray.c msgid "function is implemented for ndarrays only" msgstr "" #: py/argcheck.c #, c-format msgid "function missing %d required positional arguments" msgstr "" #: py/bc.c msgid "function missing keyword-only argument" msgstr "" #: py/bc.c msgid "function missing required keyword argument '%q'" msgstr "" #: py/bc.c #, c-format msgid "function missing required positional argument #%d" msgstr "" #: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/time/__init__.c #, c-format msgid "function takes %d positional arguments but %d were given" msgstr "" #: shared-bindings/time/__init__.c msgid "function takes exactly 9 arguments" msgstr "" #: py/objgenerator.c msgid "generator already executing" msgstr "" #: py/objgenerator.c msgid "generator ignored GeneratorExit" msgstr "" #: py/objgenerator.c py/runtime.c msgid "generator raised StopIteration" msgstr "" #: shared-bindings/_stage/Layer.c msgid "graphic must be 2048 bytes long" msgstr "" #: extmod/moduhashlib.c msgid "hash is final" msgstr "" #: extmod/moduheapq.c msgid "heap must be a list" msgstr "" #: py/compile.c msgid "identifier redefined as global" msgstr "" #: py/compile.c msgid "identifier redefined as nonlocal" msgstr "" #: py/compile.c msgid "import * not at module level" msgstr "" #: py/persistentcode.c msgid "incompatible native .mpy architecture" msgstr "" #: py/objstr.c msgid "incomplete format" msgstr "" #: py/objstr.c msgid "incomplete format key" msgstr "" #: extmod/modubinascii.c msgid "incorrect padding" msgstr "" #: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/transform.c msgid "index is out of bounds" msgstr "" #: extmod/ulab/code/numpy/numerical.c extmod/ulab/code/ulab_tools.c #: ports/espressif/common-hal/pulseio/PulseIn.c py/obj.c #: shared-bindings/bitmaptools/__init__.c msgid "index out of range" msgstr "" #: py/obj.c msgid "indices must be integers" msgstr "" #: extmod/ulab/code/ndarray.c msgid "indices must be integers, slices, or Boolean lists" msgstr "" #: ports/espressif/common-hal/busio/I2C.c msgid "init I2C" msgstr "" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "initial values must be iterable" msgstr "" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c msgid "initial_value length is wrong" msgstr "" #: py/compile.c msgid "inline assembler must be a function" msgstr "" #: extmod/ulab/code/ndarray.c msgid "input and output shapes are not compatible" msgstr "" #: extmod/ulab/code/numpy/create.c msgid "input argument must be an integer, a tuple, or a list" msgstr "" #: extmod/ulab/code/numpy/fft/fft_tools.c msgid "input array length must be power of 2" msgstr "" #: extmod/ulab/code/numpy/create.c msgid "input arrays are not compatible" msgstr "" #: extmod/ulab/code/numpy/poly.c msgid "input data must be an iterable" msgstr "" #: extmod/ulab/code/numpy/vector.c msgid "input dtype must be float or complex" msgstr "" #: extmod/ulab/code/numpy/linalg/linalg.c msgid "input matrix is asymmetric" msgstr "" #: extmod/ulab/code/numpy/linalg/linalg.c #: extmod/ulab/code/scipy/linalg/linalg.c msgid "input matrix is singular" msgstr "" #: extmod/ulab/code/numpy/create.c msgid "input must be 1- or 2-d" msgstr "" #: extmod/ulab/code/numpy/carray/carray.c msgid "input must be a 1D ndarray" msgstr "" #: extmod/ulab/code/scipy/linalg/linalg.c extmod/ulab/code/user/user.c msgid "input must be a dense ndarray" msgstr "" #: extmod/ulab/code/user/user.c msgid "input must be an ndarray" msgstr "" #: extmod/ulab/code/numpy/carray/carray.c msgid "input must be an ndarray, or a scalar" msgstr "" #: extmod/ulab/code/scipy/signal/signal.c msgid "input must be one-dimensional" msgstr "" #: extmod/ulab/code/ulab_tools.c msgid "input must be square matrix" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "input must be tuple, list, range, or ndarray" msgstr "" #: extmod/ulab/code/numpy/poly.c msgid "input vectors must be of equal length" msgstr "" #: extmod/ulab/code/numpy/poly.c msgid "inputs are not iterable" msgstr "" #: py/parsenum.c msgid "int() arg 2 must be >= 2 and <= 36" msgstr "" #: extmod/ulab/code/numpy/approx.c msgid "interp is defined for 1D iterables of equal length" msgstr "" #: shared-bindings/_bleio/Adapter.c #, c-format msgid "interval must be in range %s-%s" msgstr "" #: py/compile.c msgid "invalid architecture" msgstr "" #: shared-bindings/bitmaptools/__init__.c #, c-format msgid "invalid bits_per_pixel %d, must be, 1, 2, 4, 8, 16, 24, or 32" msgstr "" #: shared-bindings/bitmaptools/__init__.c #, c-format msgid "invalid element size %d for bits_per_pixel %d\n" msgstr "" #: shared-bindings/bitmaptools/__init__.c #, c-format msgid "invalid element_size %d, must be, 1, 2, or 4" msgstr "" #: shared-bindings/traceback/__init__.c msgid "invalid exception" msgstr "" #: extmod/modframebuf.c msgid "invalid format" msgstr "" #: py/objstr.c msgid "invalid format specifier" msgstr "" #: shared-bindings/wifi/Radio.c msgid "invalid hostname" msgstr "" #: py/compile.c msgid "invalid micropython decorator" msgstr "" #: shared-bindings/random/__init__.c msgid "invalid step" msgstr "" #: py/compile.c py/parse.c msgid "invalid syntax" msgstr "" #: py/parsenum.c msgid "invalid syntax for integer" msgstr "" #: py/parsenum.c #, c-format msgid "invalid syntax for integer with base %d" msgstr "" #: py/parsenum.c msgid "invalid syntax for number" msgstr "" #: py/objexcept.c msgid "invalid traceback" msgstr "" #: py/objtype.c msgid "issubclass() arg 1 must be a class" msgstr "" #: py/objtype.c msgid "issubclass() arg 2 must be a class or a tuple of classes" msgstr "" #: extmod/ulab/code/numpy/linalg/linalg.c msgid "iterations did not converge" msgstr "" #: py/objstr.c msgid "join expects a list of str/bytes objects consistent with self object" msgstr "" #: py/argcheck.c msgid "keyword argument(s) not yet implemented - use normal args instead" msgstr "" #: py/bc.c msgid "keywords must be strings" msgstr "" #: py/emitinlinethumb.c py/emitinlinextensa.c msgid "label '%q' not defined" msgstr "" #: py/compile.c msgid "label redefined" msgstr "" #: py/stream.c msgid "length argument not allowed for this type" msgstr "" #: shared-bindings/audiomixer/MixerVoice.c msgid "level must be between 0 and 1" msgstr "" #: py/objarray.c msgid "lhs and rhs should be compatible" msgstr "" #: py/emitnative.c msgid "local '%q' has type '%q' but source is '%q'" msgstr "" #: py/emitnative.c msgid "local '%q' used before type known" msgstr "" #: py/vm.c msgid "local variable referenced before assignment" msgstr "" #: py/objint.c msgid "long int not supported in this build" msgstr "" #: ports/espressif/common-hal/canio/CAN.c msgid "loopback + silent mode not supported by peripheral" msgstr "" #: ports/espressif/common-hal/mdns/Server.c msgid "mDNS already initialized" msgstr "" #: ports/espressif/common-hal/mdns/Server.c msgid "mDNS only works with built-in WiFi" msgstr "" #: py/parse.c msgid "malformed f-string" msgstr "" #: shared-bindings/_stage/Layer.c msgid "map buffer too small" msgstr "" #: py/modmath.c shared-bindings/math/__init__.c msgid "math domain error" msgstr "" #: extmod/ulab/code/numpy/linalg/linalg.c msgid "matrix is not positive definite" msgstr "" #: ports/espressif/common-hal/_bleio/Descriptor.c #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c #, c-format msgid "max_length must be 0-%d when fixed_length is %s" msgstr "" #: extmod/ulab/code/ndarray.c msgid "maximum number of dimensions is " msgstr "" #: py/runtime.c msgid "maximum recursion depth exceeded" msgstr "" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "maxiter must be > 0" msgstr "" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "maxiter should be > 0" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "median argument must be an ndarray" msgstr "" #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" msgstr "" #: py/runtime.c msgid "memory allocation failed, heap is locked" msgstr "" #: py/objarray.c msgid "memoryview: length is not a multiple of itemsize" msgstr "" #: extmod/ulab/code/numpy/linalg/linalg.c msgid "mode must be complete, or reduced" msgstr "" #: py/builtinimport.c msgid "module not found" msgstr "" #: ports/espressif/common-hal/wifi/Monitor.c msgid "monitor init failed" msgstr "" #: extmod/ulab/code/numpy/poly.c msgid "more degrees of freedom than data points" msgstr "" #: py/compile.c msgid "multiple *x in assignment" msgstr "" #: py/objtype.c msgid "multiple bases have instance lay-out conflict" msgstr "" #: py/objtype.c msgid "multiple inheritance not supported" msgstr "" #: py/emitnative.c msgid "must raise an object" msgstr "" #: py/modbuiltins.c msgid "must use keyword argument for key function" msgstr "" #: py/runtime.c msgid "name '%q' is not defined" msgstr "" #: py/runtime.c msgid "name not defined" msgstr "" #: py/asmthumb.c msgid "native method too big" msgstr "" #: py/emitnative.c msgid "native yield" msgstr "" #: py/runtime.c #, c-format msgid "need more than %d values to unpack" msgstr "" #: py/modmath.c msgid "negative factorial" msgstr "" #: py/objint_longlong.c py/objint_mpz.c py/runtime.c msgid "negative power with no float support" msgstr "" #: py/objint_mpz.c py/runtime.c msgid "negative shift count" msgstr "" #: shared-module/sdcardio/SDCard.c msgid "no SD card" msgstr "" #: py/vm.c msgid "no active exception to reraise" msgstr "" #: py/compile.c msgid "no binding for nonlocal found" msgstr "" #: shared-module/msgpack/__init__.c msgid "no default packer" msgstr "" #: extmod/modurandom.c msgid "no default seed" msgstr "" #: py/builtinimport.c msgid "no module named '%q'" msgstr "" #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c #: shared-bindings/paralleldisplay/ParallelBus.c msgid "no reset pin available" msgstr "" #: shared-module/sdcardio/SDCard.c msgid "no response from SD card" msgstr "" #: py/objobject.c py/runtime.c msgid "no such attribute" msgstr "" #: shared-bindings/usb_hid/__init__.c msgid "non-Device in %q" msgstr "" #: ports/espressif/common-hal/_bleio/Connection.c #: ports/nrf/common-hal/_bleio/Connection.c msgid "non-UUID found in service_uuids_whitelist" msgstr "" #: py/compile.c msgid "non-default argument follows default argument" msgstr "" #: extmod/modubinascii.c msgid "non-hex digit found" msgstr "" #: py/compile.c msgid "non-keyword arg after */**" msgstr "" #: py/compile.c msgid "non-keyword arg after keyword arg" msgstr "" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "non-zero timeout must be > 0.01" msgstr "" #: shared-bindings/_bleio/Adapter.c msgid "non-zero timeout must be >= interval" msgstr "" #: shared-bindings/_bleio/UUID.c msgid "not a 128-bit UUID" msgstr "" #: py/objstr.c msgid "not all arguments converted during string formatting" msgstr "" #: py/objstr.c msgid "not enough arguments for format string" msgstr "" #: extmod/ulab/code/numpy/carray/carray_tools.c msgid "not implemented for complex dtype" msgstr "" #: extmod/ulab/code/numpy/create.c msgid "number of points must be at least 2" msgstr "" #: py/builtinhelp.c msgid "object " msgstr "" #: py/obj.c #, c-format msgid "object '%s' isn't a tuple or list" msgstr "" #: py/obj.c msgid "object doesn't support item assignment" msgstr "" #: py/obj.c msgid "object doesn't support item deletion" msgstr "" #: py/obj.c msgid "object has no len" msgstr "" #: py/obj.c msgid "object isn't subscriptable" msgstr "" #: py/runtime.c msgid "object not an iterator" msgstr "" #: py/objtype.c py/runtime.c msgid "object not callable" msgstr "" #: py/sequence.c shared-bindings/displayio/Group.c msgid "object not in sequence" msgstr "" #: py/runtime.c msgid "object not iterable" msgstr "" #: py/obj.c #, c-format msgid "object of type '%s' has no len()" msgstr "" #: py/obj.c msgid "object with buffer protocol required" msgstr "" #: extmod/modubinascii.c msgid "odd-length string" msgstr "" #: supervisor/shared/web_workflow/web_workflow.c msgid "off" msgstr "" #: extmod/ulab/code/utils/utils.c msgid "offset is too large" msgstr "" #: shared-bindings/dualbank/__init__.c msgid "offset must be >= 0" msgstr "" #: extmod/ulab/code/numpy/create.c msgid "offset must be non-negative and no greater than buffer length" msgstr "" #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "" #: ports/nrf/common-hal/audiobusio/PDMIn.c msgid "only bit_depth=16 is supported" msgstr "" #: ports/nrf/common-hal/audiobusio/PDMIn.c msgid "only sample_rate=16000 is supported" msgstr "" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c #: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "" #: py/vm.c msgid "opcode" msgstr "" #: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/compare.c #: extmod/ulab/code/numpy/vector.c msgid "operands could not be broadcast together" msgstr "" #: extmod/ulab/code/numpy/linalg/linalg.c msgid "operation is defined for 2D arrays only" msgstr "" #: extmod/ulab/code/numpy/linalg/linalg.c msgid "operation is defined for ndarrays only" msgstr "" #: extmod/ulab/code/ndarray.c msgid "operation is implemented for 1D Boolean arrays only" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" #: extmod/ulab/code/ndarray.c msgid "operation is not supported for given type" msgstr "" #: py/modbuiltins.c msgid "ord expects a character" msgstr "" #: py/modbuiltins.c #, c-format msgid "ord() expected a character, but string of length %d found" msgstr "" #: extmod/ulab/code/utils/utils.c msgid "out array is too small" msgstr "" #: extmod/ulab/code/utils/utils.c msgid "out must be a float dense array" msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "out of range of source" msgstr "" #: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c msgid "out of range of target" msgstr "" #: py/objint_mpz.c msgid "overflow converting long int to machine word" msgstr "" #: py/modstruct.c #, c-format msgid "pack expected %d items for packing (got %d)" msgstr "" #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "" #: shared-bindings/displayio/Palette.c msgid "palette_index should be an int" msgstr "" #: py/emitinlinextensa.c msgid "parameters must be registers in sequence a2 to a5" msgstr "" #: py/emitinlinethumb.c msgid "parameters must be registers in sequence r0 to r3" msgstr "" #: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c msgid "pixel coordinates out of bounds" msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "pixel value requires too many bits" msgstr "" #: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter" msgstr "" #: extmod/vfs_posix_file.c msgid "poll on file not available on win32" msgstr "" #: ports/espressif/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c py/objdict.c py/objlist.c py/objset.c #: shared-bindings/ps2io/Ps2.c msgid "pop from empty %q" msgstr "" #: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "port must be >= 0" msgstr "" #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" #: py/objint_mpz.c msgid "pow() with 3 arguments requires integers" msgstr "" #: ports/espressif/boards/adafruit_qtpy_esp32c3/mpconfigboard.h #: ports/espressif/boards/lolin_c3_mini/mpconfigboard.h #: supervisor/shared/safe_mode.c msgid "pressing boot button at start up.\n" msgstr "" #: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h #: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h #: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h #: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h #: ports/atmel-samd/boards/meowmeow/mpconfigboard.h msgid "pressing both buttons at start up.\n" msgstr "" #: ports/nrf/boards/aramcon2_badge/mpconfigboard.h msgid "pressing the left button at start up\n" msgstr "" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "pull masks conflict with direction masks" msgstr "" #: extmod/modutimeq.c msgid "queue overflow" msgstr "" #: py/parse.c msgid "raw f-strings are not supported" msgstr "" #: extmod/ulab/code/numpy/fft/fft_tools.c msgid "real and imaginary parts must be of equal length" msgstr "" #: py/builtinimport.c msgid "relative import" msgstr "" #: py/obj.c #, c-format msgid "requested length %d but object has length %d" msgstr "" #: extmod/ulab/code/ndarray_operators.c msgid "results cannot be cast to specified type" msgstr "" #: py/compile.c msgid "return annotation must be an identifier" msgstr "" #: py/emitnative.c msgid "return expected '%q' but got '%q'" msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "rgb_pins[%d] duplicates another pin assignment" msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "rgb_pins[%d] is not on the same port as clock" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "roll argument must be an ndarray" msgstr "" #: py/objstr.c msgid "rsplit(None,n)" msgstr "" #: shared-bindings/audiocore/RawSample.c msgid "" "sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or " "'B'" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c #: ports/raspberrypi/common-hal/audiobusio/PDMIn.c msgid "sampling rate out of range" msgstr "" #: py/modmicropython.c msgid "schedule queue full" msgstr "" #: py/builtinimport.c msgid "script compilation not supported" msgstr "" #: py/nativeglue.c msgid "set unsupported" msgstr "" #: extmod/ulab/code/ndarray.c msgid "shape must be a tuple" msgstr "" #: shared-module/msgpack/__init__.c msgid "short read" msgstr "" #: py/objstr.c msgid "sign not allowed in string format specifier" msgstr "" #: py/objstr.c msgid "sign not allowed with integer format specifier 'c'" msgstr "" #: py/objstr.c msgid "single '}' encountered in format string" msgstr "" #: extmod/ulab/code/ulab_tools.c msgid "size is defined for ndarrays only" msgstr "" #: shared-bindings/time/__init__.c msgid "sleep length must be non-negative" msgstr "" #: extmod/ulab/code/ndarray.c msgid "slice step can't be zero" msgstr "" #: py/objslice.c msgid "slice step cannot be zero" msgstr "" #: py/nativeglue.c msgid "slice unsupported" msgstr "" #: py/objint.c py/sequence.c msgid "small int overflow" msgstr "" #: main.c msgid "soft reboot\n" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "sort argument must be an ndarray" msgstr "" #: extmod/ulab/code/scipy/signal/signal.c msgid "sos array must be of shape (n_section, 6)" msgstr "" #: extmod/ulab/code/scipy/signal/signal.c msgid "sos[:, 3] should be all ones" msgstr "" #: extmod/ulab/code/scipy/signal/signal.c msgid "sosfilt requires iterable arguments" msgstr "" #: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c msgid "source palette too large" msgstr "" #: shared-bindings/bitmaptools/__init__.c msgid "source_bitmap must have value_count of 2 or 65536" msgstr "" #: shared-bindings/bitmaptools/__init__.c msgid "source_bitmap must have value_count of 65536" msgstr "" #: shared-bindings/bitmaptools/__init__.c msgid "source_bitmap must have value_count of 8" msgstr "" #: py/objstr.c msgid "start/end indices" msgstr "" #: shared-bindings/displayio/Shape.c msgid "start_x should be an int" msgstr "" #: shared-bindings/random/__init__.c msgid "step must be non-zero" msgstr "" #: shared-bindings/random/__init__.c msgid "stop not reachable from start" msgstr "" #: py/stream.c shared-bindings/getpass/__init__.c msgid "stream operation not supported" msgstr "" #: py/objstrunicode.c msgid "string indices must be integers, not %q" msgstr "" #: py/stream.c msgid "string not supported; use bytes or bytearray" msgstr "" #: extmod/moductypes.c msgid "struct: can't index" msgstr "" #: extmod/moductypes.c msgid "struct: index out of range" msgstr "" #: extmod/moductypes.c msgid "struct: no fields" msgstr "" #: py/objarray.c py/objstr.c msgid "substring not found" msgstr "" #: py/compile.c msgid "super() can't find self" msgstr "" #: extmod/modujson.c msgid "syntax error in JSON" msgstr "" #: extmod/moductypes.c msgid "syntax error in uctypes descriptor" msgstr "" #: shared-bindings/touchio/TouchIn.c msgid "threshold must be in the range 0-65536" msgstr "" #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" msgstr "" #: ports/atmel-samd/common-hal/watchdog/WatchDogTimer.c #: ports/espressif/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c #: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "" #: shared-bindings/busio/UART.c msgid "timeout must be 0.0-100.0 seconds" msgstr "" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "timeout must be < 655.35 secs" msgstr "" #: shared-module/sdcardio/SDCard.c msgid "timeout waiting for v1 card" msgstr "" #: shared-module/sdcardio/SDCard.c msgid "timeout waiting for v2 card" msgstr "" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "timer re-init" msgstr "" #: shared-bindings/time/__init__.c msgid "timestamp out of range for platform time_t" msgstr "" #: extmod/ulab/code/ndarray.c msgid "tobytes can be invoked for dense arrays only" msgstr "" #: shared-module/struct/__init__.c msgid "too many arguments provided with the given format" msgstr "" #: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/create.c msgid "too many dimensions" msgstr "" #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" #: py/asmthumb.c msgid "too many locals for native method" msgstr "" #: py/runtime.c #, c-format msgid "too many values to unpack (expected %d)" msgstr "" #: extmod/ulab/code/numpy/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "" #: extmod/ulab/code/numpy/approx.c msgid "trapz is defined for 1D iterables" msgstr "" #: py/obj.c msgid "tuple/list has wrong length" msgstr "" #: ports/espressif/common-hal/canio/CAN.c #, c-format msgid "twai_driver_install returned esp-idf error #%d" msgstr "" #: ports/espressif/common-hal/canio/CAN.c #, c-format msgid "twai_start returned esp-idf error #%d" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/espressif/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "" #: py/objtype.c msgid "type '%q' is not an acceptable base type" msgstr "" #: py/objtype.c msgid "type is not an acceptable base type" msgstr "" #: py/runtime.c msgid "type object '%q' has no attribute '%q'" msgstr "" #: py/objgenerator.c msgid "type object 'generator' has no attribute '__await__'" msgstr "" #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "" #: py/objint_longlong.c msgid "ulonglong too large" msgstr "" #: py/emitnative.c msgid "unary op %q not implemented" msgstr "" #: py/parse.c msgid "unexpected indent" msgstr "" #: py/bc.c msgid "unexpected keyword argument" msgstr "" #: py/bc.c py/objnamedtuple.c msgid "unexpected keyword argument '%q'" msgstr "" #: py/lexer.c msgid "unicode name escapes" msgstr "" #: py/parse.c msgid "unindent doesn't match any outer indent level" msgstr "" #: py/objstr.c #, c-format msgid "unknown conversion specifier %c" msgstr "" #: py/objstr.c msgid "unknown format code '%c' for object of type '%q'" msgstr "" #: py/compile.c msgid "unknown type" msgstr "" #: py/compile.c msgid "unknown type '%q'" msgstr "" #: py/objstr.c msgid "unmatched '{' in format" msgstr "" #: py/objtype.c py/runtime.c msgid "unreadable attribute" msgstr "" #: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c #: shared-module/vectorio/Polygon.c shared-module/vectorio/VectorShape.c msgid "unsupported %q type" msgstr "" #: py/emitinlinethumb.c #, c-format msgid "unsupported Thumb instruction '%s' with %d arguments" msgstr "" #: py/emitinlinextensa.c #, c-format msgid "unsupported Xtensa instruction '%s' with %d arguments" msgstr "" #: shared-module/gifio/GifWriter.c msgid "unsupported colorspace for GifWriter" msgstr "" #: shared-bindings/bitmaptools/__init__.c msgid "unsupported colorspace for dither" msgstr "" #: py/objstr.c #, c-format msgid "unsupported format character '%c' (0x%x) at index %d" msgstr "" #: py/runtime.c msgid "unsupported type for %q: '%q'" msgstr "" #: py/runtime.c msgid "unsupported type for operator" msgstr "" #: py/runtime.c msgid "unsupported types for %q: '%q', '%q'" msgstr "" #: extmod/ulab/code/numpy/io/io.c msgid "usecols is too high" msgstr "" #: extmod/ulab/code/numpy/io/io.c msgid "usecols keyword must be specified" msgstr "" #: py/objint.c #, c-format msgid "value must fit in %d byte(s)" msgstr "" #: shared-bindings/bitmaptools/__init__.c msgid "value out of range of target" msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "value_count must be > 0" msgstr "" #: ports/espressif/common-hal/watchdog/WatchDogTimer.c msgid "watchdog not initialized" msgstr "" #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "" #: shared-bindings/is31fl3741/FrameBuffer.c msgid "width must be greater than zero" msgstr "" #: ports/espressif/common-hal/wifi/Radio.c msgid "wifi is not enabled" msgstr "" #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "" #: extmod/ulab/code/numpy/numerical.c msgid "wrong axis index" msgstr "" #: extmod/ulab/code/numpy/create.c msgid "wrong axis specified" msgstr "" #: extmod/ulab/code/numpy/io/io.c msgid "wrong dtype" msgstr "" #: extmod/ulab/code/numpy/transform.c msgid "wrong index type" msgstr "" #: extmod/ulab/code/numpy/compare.c extmod/ulab/code/numpy/create.c #: extmod/ulab/code/numpy/io/io.c extmod/ulab/code/numpy/transform.c #: extmod/ulab/code/numpy/vector.c msgid "wrong input type" msgstr "" #: extmod/ulab/code/numpy/transform.c msgid "wrong length of condition array" msgstr "" #: extmod/ulab/code/numpy/transform.c msgid "wrong length of index array" msgstr "" #: extmod/ulab/code/numpy/create.c py/objarray.c py/objstr.c msgid "wrong number of arguments" msgstr "" #: py/runtime.c msgid "wrong number of values to unpack" msgstr "" #: extmod/ulab/code/numpy/vector.c msgid "wrong output type" msgstr "" #: shared-module/displayio/Shape.c msgid "x value out of bounds" msgstr "" #: ports/espressif/common-hal/audiobusio/__init__.c msgid "xTaskCreate failed" msgstr "" #: shared-bindings/displayio/Shape.c msgid "y should be an int" msgstr "" #: shared-module/displayio/Shape.c msgid "y value out of bounds" msgstr "" #: py/objrange.c msgid "zero step" msgstr "" #: extmod/ulab/code/scipy/signal/signal.c msgid "zi must be an ndarray" msgstr "" #: extmod/ulab/code/scipy/signal/signal.c msgid "zi must be of float type" msgstr "" #: extmod/ulab/code/scipy/signal/signal.c msgid "zi must be of shape (n_section, 2)" msgstr "" #~ msgid "%q must be a tuple of length 2" #~ msgstr "%q, boyutu 2 olan bir tuple olmalıdır" #~ msgid "%q must be between %d and %d" #~ msgstr "%q, %d ile %d arasında olmalıdır" #~ msgid "%q should be an int" #~ msgstr "%q bir int olmalıdır" #~ msgid "(x,y) integers required" #~ msgstr "(x, y) integerları gereklidir" #~ msgid "Address type out of range" #~ msgstr "Adres tipi beklenen aralığın dışında" #~ msgid "AnalogIn not supported on given pin" #~ msgstr "Verilen pin için AnalogIn desteklenmemektedir" #~ msgid "AnalogOut functionality not supported" #~ msgstr "AnalogOut işlevi desteklenmemektedir" #~ msgid "AnalogOut is only 16 bits. Value must be less than 65536." #~ msgstr "AnalogOut yalnızca 16 bitlik. Değer 65536'dan küçük olmalıdır." #~ msgid "AnalogOut not supported on given pin" #~ msgstr "Verilen pin için AnalogOut desteklenmemektedir" #, c-format #~ msgid "Bit depth must be from 1 to 6 inclusive, not %d" #~ msgstr "Bit derinliği 1-6 aralığında olmalı, %d değil" #, c-format #~ msgid "Buffer incorrect size. Should be %d bytes." #~ msgstr "Geçersiz arabellek boyutu. %d kadar olmalı" #~ msgid "Buffer must be at least length 1" #~ msgstr "Arabellek boyutu en az 1 olmalı" #~ msgid "Bytes must be between 0 and 255." #~ msgstr "Baytlar 0-255 aralığında olmalı" #~ msgid "" #~ "\n" #~ "Code stopped by auto-reload.\n" #~ msgstr "" #~ "\n" #~ "Program otomatik yeniden yükleme tarafından sonlandırıldı.\n"