# Pirate (English) Translation # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-02-10 11:46-0500\n" "PO-Revision-Date: 2018-07-27 11:55-0700\n" "Last-Translator: \n" "Language-Team: @sommersoft, @MrCertainly\n" "Language: en_x_pirate\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: Poedit 2.1.1\n" #: main.c msgid "" "\n" "Code done running. Waiting for reload.\n" msgstr "" "\n" "Captin's orders are complete. Holdin' fast fer reload.\n" #: supervisor/shared/safe_mode.c msgid "" "\n" "Please file an issue with the contents of your CIRCUITPY drive at \n" "https://github.com/adafruit/circuitpython/issues\n" msgstr "" #: supervisor/shared/safe_mode.c msgid "" "\n" "To exit, please reset the board without " msgstr "" #: py/obj.c msgid " File \"%q\"" msgstr "" #: py/obj.c msgid " File \"%q\", line %d" msgstr "" #: main.c msgid " output:\n" msgstr "" #: py/objstr.c #, c-format msgid "%%c requires int or char" msgstr "" #: shared-bindings/microcontroller/Pin.c msgid "%q in use" msgstr "" #: py/obj.c msgid "%q index out of range" msgstr "" #: py/obj.c msgid "%q indices must be integers, not %s" msgstr "" #: shared-bindings/_bleio/CharacteristicBuffer.c #: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c #: shared-bindings/displayio/Shape.c msgid "%q must be >= 1" msgstr "" #: shared-bindings/fontio/BuiltinFont.c msgid "%q should be an int" msgstr "" #: py/bc.c py/objnamedtuple.c msgid "%q() takes %d positional arguments but %d were given" msgstr "" #: py/argcheck.c msgid "'%q' argument required" msgstr "" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects a label" msgstr "" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects a register" msgstr "" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects a special register" msgstr "" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects an FPU register" msgstr "" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects an address of the form [a, b]" msgstr "" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects an integer" msgstr "" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects at most r%d" msgstr "" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects {r0, r1, ...}" msgstr "" #: py/emitinlinextensa.c #, c-format msgid "'%s' integer %d is not within range %d..%d" msgstr "" #: py/emitinlinethumb.c #, c-format msgid "'%s' integer 0x%x does not fit in mask 0x%x" msgstr "" #: py/proto.c msgid "'%s' object does not support '%q'" msgstr "" #: py/obj.c #, c-format msgid "'%s' object does not support item assignment" msgstr "" #: py/obj.c #, c-format msgid "'%s' object does not support item deletion" msgstr "" #: py/runtime.c msgid "'%s' object has no attribute '%q'" msgstr "" #: py/runtime.c #, c-format msgid "'%s' object is not an iterator" msgstr "" #: py/objtype.c py/runtime.c #, c-format msgid "'%s' object is not callable" msgstr "" #: py/runtime.c #, c-format msgid "'%s' object is not iterable" msgstr "" #: py/obj.c #, c-format msgid "'%s' object is not subscriptable" msgstr "" #: py/objstr.c msgid "'=' alignment not allowed in string format specifier" msgstr "" #: shared-module/struct/__init__.c msgid "'S' and 'O' are not supported format types" msgstr "" #: py/compile.c msgid "'align' requires 1 argument" msgstr "" #: py/compile.c msgid "'await' outside function" msgstr "" #: py/compile.c msgid "'break' outside loop" msgstr "" #: py/compile.c msgid "'continue' outside loop" msgstr "" #: py/compile.c msgid "'data' requires at least 2 arguments" msgstr "" #: py/compile.c msgid "'data' requires integer arguments" msgstr "" #: py/compile.c msgid "'label' requires 1 argument" msgstr "" #: py/compile.c msgid "'return' outside function" msgstr "" #: py/compile.c msgid "'yield' outside function" msgstr "" #: py/compile.c msgid "*x must be assignment target" msgstr "" #: py/obj.c msgid ", in %q\n" msgstr "" #: py/objcomplex.c msgid "0.0 to a complex power" msgstr "" #: py/modbuiltins.c msgid "3-arg pow() not supported" msgstr "" #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c msgid "A hardware interrupt channel is already in use" msgstr "Avast! A hardware interrupt channel be used already" #: shared-bindings/_bleio/Address.c #, c-format msgid "Address must be %d bytes long" msgstr "" #: shared-bindings/_bleio/Address.c msgid "Address type out of range" msgstr "" #: ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "" #: ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "" #: ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "All event channels in use" msgstr "" #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "" #: shared-bindings/pulseio/PWMOut.c msgid "All timers for this pin are in use" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c shared-bindings/pulseio/PWMOut.c #: shared-module/_pew/PewPew.c msgid "All timers in use" msgstr "" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Already advertising." msgstr "" #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "" #: shared-bindings/analogio/AnalogOut.c msgid "AnalogOut is only 16 bits. Value must be less than 65536." msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c msgid "AnalogOut not supported on given pin" msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c msgid "Another send is already active" msgstr "Belay that! thar be another active send" #: shared-bindings/pulseio/PulseOut.c msgid "Array must contain halfwords (type 'H')" msgstr "" #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "" #: supervisor/shared/safe_mode.c msgid "Attempted heap allocation when MicroPython VM not running." msgstr "" #: main.c msgid "Auto-reload is off.\n" msgstr "Auto-reload be off.\n" #: main.c msgid "" "Auto-reload is on. Simply save files over USB to run them or enter REPL to " "disable.\n" msgstr "" "Auto-reload be on. Put yer files on USB to weigh anchor, er' bring'er about " "t' the REPL t' scuttle.\n" #: shared-module/displayio/Display.c msgid "Below minimum frame rate" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Bit clock and word select must share a clock unit" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "" #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c msgid "Both pins must support hardware interrupts" msgstr "" #: shared-bindings/displayio/Display.c msgid "Brightness must be 0-1.0" msgstr "" #: shared-bindings/supervisor/__init__.c msgid "Brightness must be between 0 and 255" msgstr "" #: shared-bindings/displayio/Display.c msgid "Brightness not adjustable" msgstr "" #: shared-bindings/_bleio/UUID.c #, c-format msgid "Buffer + offset too small %d %d %d" msgstr "" #: shared-module/usb_hid/Device.c #, c-format msgid "Buffer incorrect size. Should be %d bytes." msgstr "" #: shared-bindings/displayio/Display.c msgid "Buffer is not a bytearray." msgstr "" #: shared-bindings/displayio/Display.c msgid "Buffer is too small" msgstr "" #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #, c-format msgid "Buffer length %d too big. It must be less than %d" msgstr "" #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c msgid "Buffer must be at least length 1" msgstr "" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Buffer too large and unable to allocate" msgstr "" #: ports/atmel-samd/common-hal/displayio/ParallelBus.c #: ports/nrf/common-hal/displayio/ParallelBus.c #, c-format msgid "Bus pin %d is already in use" msgstr "Belay that! Bus pin %d already be in use" #: shared-bindings/_bleio/UUID.c msgid "Byte buffer must be 16 bytes." msgstr "" #: shared-bindings/nvm/ByteArray.c msgid "Bytes must be between 0 and 255." msgstr "" #: py/objtype.c msgid "Call super().__init__() before accessing native object." msgstr "" #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "Can't set CCCD on local Characteristic" msgstr "" #: shared-bindings/displayio/Bitmap.c shared-bindings/pulseio/PulseIn.c msgid "Cannot delete values" msgstr "" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "" #: ports/nrf/common-hal/microcontroller/Processor.c msgid "Cannot get temperature" msgstr "" #: shared-bindings/_bleio/Adapter.c msgid "Cannot have scan responses for extended, connectable advertisements." msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Cannot output both channels on the same pin" msgstr "" #: shared-module/bitbangio/SPI.c msgid "Cannot read without MISO pin." msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "Cannot record to a file" msgstr "" #: shared-module/storage/__init__.c msgid "Cannot remount '/' when USB is active." msgstr "" #: ports/atmel-samd/common-hal/microcontroller/__init__.c #: ports/cxd56/common-hal/microcontroller/__init__.c #: ports/mimxrt10xx/common-hal/microcontroller/__init__.c msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "" #: py/objslice.c msgid "Cannot subclass slice" msgstr "" #: shared-module/bitbangio/SPI.c msgid "Cannot transfer without MOSI and MISO pins." msgstr "" #: extmod/moductypes.c msgid "Cannot unambiguously get sizeof scalar" msgstr "" #: ports/stm32f4/common-hal/pulseio/PWMOut.c msgid "Cannot vary frequency on a timer that is already in use" msgstr "" #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "" #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "CharacteristicBuffer writing not provided" msgstr "" #: supervisor/shared/safe_mode.c msgid "CircuitPython core code crashed hard. Whoops!\n" msgstr "" #: supervisor/shared/safe_mode.c msgid "" "CircuitPython is in safe mode because you pressed the reset button during " "boot. Press again to exit safe mode.\n" msgstr "" #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "" #: shared-module/bitbangio/I2C.c msgid "Clock stretch too long" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Clock unit in use" msgstr "" #: shared-bindings/_pew/PewPew.c msgid "Column entry must be digitalio.DigitalInOut" msgstr "" #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c #: shared-bindings/displayio/ParallelBus.c msgid "Command must be an int between 0 and 255" msgstr "" #: shared-bindings/_bleio/Connection.c msgid "" "Connection has been disconnected and can no longer be used. Create a new " "connection." msgstr "" #: py/persistentcode.c msgid "Corrupt .mpy file" msgstr "" #: py/emitglue.c msgid "Corrupt raw code" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "" #: ports/stm32f4/common-hal/pulseio/PWMOut.c msgid "Could not initialize channel" msgstr "" #: ports/stm32f4/common-hal/pulseio/PWMOut.c msgid "Could not initialize timer" msgstr "" #: ports/stm32f4/common-hal/pulseio/PWMOut.c msgid "Could not re-init channel" msgstr "" #: ports/stm32f4/common-hal/pulseio/PWMOut.c msgid "Could not re-init timer" msgstr "" #: ports/stm32f4/common-hal/pulseio/PWMOut.c msgid "Could not restart PWM" msgstr "" #: ports/stm32f4/common-hal/pulseio/PWMOut.c msgid "Could not start PWM" msgstr "" #: ports/stm32f4/common-hal/busio/UART.c msgid "Could not start interrupt, RX busy" msgstr "" #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "" #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate first buffer" msgstr "" #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate input buffer" msgstr "" #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate second buffer" msgstr "" #: supervisor/shared/safe_mode.c msgid "Crash into the HardFault_Handler." msgstr "" #: ports/stm32f4/common-hal/analogio/AnalogOut.c msgid "DAC Channel Init Error" msgstr "" #: ports/stm32f4/common-hal/analogio/AnalogOut.c msgid "DAC Device Init Error" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "" #: ports/atmel-samd/common-hal/displayio/ParallelBus.c #: ports/nrf/common-hal/displayio/ParallelBus.c msgid "Data 0 pin must be byte aligned" msgstr "" #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" msgstr "" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Data too large for advertisement packet" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "Destination capacity is smaller than destination_length." msgstr "" #: ports/nrf/common-hal/audiobusio/I2SOut.c msgid "Device in use" msgstr "" #: ports/cxd56/common-hal/digitalio/DigitalInOut.c msgid "DigitalInOut not supported on given pin" msgstr "" #: shared-bindings/displayio/Display.c msgid "Display must have a 16 bit colorspace." msgstr "" #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c msgid "Display rotation must be in 90 degree increments" msgstr "" #: shared-bindings/digitalio/DigitalInOut.c msgid "Drive mode not used when direction is input." msgstr "" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c msgid "EXTINT channel already in use" msgstr "Avast! EXTINT channel already in use" #: extmod/modure.c msgid "Error in regex" msgstr "" #: shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "" #: shared-bindings/_bleio/CharacteristicBuffer.c #: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c msgid "Expected a Characteristic" msgstr "" #: shared-bindings/_bleio/Characteristic.c msgid "Expected a Service" msgstr "" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c #: shared-bindings/_bleio/Service.c msgid "Expected a UUID" msgstr "" #: shared-bindings/_bleio/Adapter.c msgid "Expected an Address" msgstr "" #: shared-module/_pixelbuf/PixelBuf.c #, c-format msgid "Expected tuple of length %d, got %d" msgstr "" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Extended advertisements with scan response not supported." msgstr "" #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "" #: ports/nrf/sd_mutex.c #, c-format msgid "Failed to acquire mutex, err 0x%04x" msgstr "" #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "Failed to allocate RX buffer" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: timeout" msgstr "" #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "" #: ports/nrf/sd_mutex.c #, c-format msgid "Failed to release mutex, err 0x%04x" msgstr "" #: supervisor/shared/safe_mode.c msgid "Failed to write internal flash." msgstr "" #: py/moduerrno.c msgid "File exists" msgstr "" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "Frequency captured is above capability. Capture Paused." msgstr "" #: ports/stm32f4/common-hal/pulseio/PWMOut.c msgid "Frequency must match existing PWMOut using this timer" msgstr "" #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" msgstr "" #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c msgid "Group already used" msgstr "" #: shared-module/displayio/Group.c msgid "Group full" msgstr "" #: ports/stm32f4/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/SPI.c msgid "Hardware busy, try alternative pins" msgstr "" #: ports/stm32f4/common-hal/busio/UART.c msgid "Hardware in use, try alternative pins" msgstr "" #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "" #: ports/stm32f4/common-hal/busio/I2C.c msgid "I2C Init Error" msgstr "" #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "" #: py/persistentcode.c msgid "" "Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/" "mpy-update for more info." msgstr "" #: shared-bindings/_pew/PewPew.c msgid "Incorrect buffer size" msgstr "" #: py/moduerrno.c msgid "Input/output error" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient encryption" msgstr "" #: ports/stm32f4/common-hal/busio/UART.c msgid "Internal define error" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "Avast! %q pin be invalid" #: ports/stm32f4/common-hal/analogio/AnalogIn.c msgid "Invalid ADC Unit value" msgstr "" #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "" #: ports/stm32f4/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "" #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm32f4/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "" #: ports/atmel-samd/common-hal/pulseio/PWMOut.c #: ports/cxd56/common-hal/pulseio/PWMOut.c #: ports/nrf/common-hal/pulseio/PWMOut.c shared-bindings/pulseio/PWMOut.c msgid "Invalid PWM frequency" msgstr "" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm32f4/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "" #: ports/mimxrt10xx/common-hal/busio/UART.c #: ports/stm32f4/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "" #: py/moduerrno.c msgid "Invalid argument" msgstr "" #: shared-module/displayio/Bitmap.c msgid "Invalid bits per value" msgstr "" #: ports/nrf/common-hal/busio/UART.c ports/stm32f4/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "" #: shared-bindings/_pixelbuf/PixelBuf.c msgid "Invalid byteorder string" msgstr "" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "Invalid capture period. Valid range: 1 - 500" msgstr "" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid channel count" msgstr "" #: shared-bindings/digitalio/DigitalInOut.c msgid "Invalid direction." msgstr "" #: shared-module/audiocore/WaveFile.c msgid "Invalid file" msgstr "" #: shared-module/audiocore/WaveFile.c msgid "Invalid format chunk size" msgstr "" #: ports/stm32f4/common-hal/pulseio/PWMOut.c msgid "Invalid frequency supplied" msgstr "" #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid number of bits" msgstr "" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid phase" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c #: shared-bindings/pulseio/PWMOut.c msgid "Invalid pin" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Invalid pin for left channel" msgstr "Belay that! Invalid pin for port-side channel" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Invalid pin for right channel" msgstr "Belay that! Invalid pin for starboard-side channel" #: ports/atmel-samd/common-hal/busio/I2C.c #: ports/atmel-samd/common-hal/busio/SPI.c #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c #: ports/stm32f4/common-hal/pulseio/PWMOut.c msgid "Invalid pins" msgstr "" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid polarity" msgstr "" #: shared-bindings/_bleio/Characteristic.c msgid "Invalid properties" msgstr "" #: shared-bindings/microcontroller/__init__.c msgid "Invalid run mode." msgstr "" #: shared-module/_bleio/Attribute.c msgid "Invalid security_mode" msgstr "" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice count" msgstr "" #: shared-module/audiocore/WaveFile.c msgid "Invalid wave file" msgstr "" #: ports/stm32f4/common-hal/busio/UART.c msgid "Invalid word/bit length" msgstr "" #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "" #: shared-module/displayio/Group.c msgid "Layer already in a group." msgstr "" #: shared-module/displayio/Group.c msgid "Layer must be a Group or TileGrid subclass." msgstr "" #: py/objslice.c msgid "Length must be an int" msgstr "" #: py/objslice.c msgid "Length must be non-negative" msgstr "" #: shared-module/bitbangio/SPI.c msgid "MISO pin init failed." msgstr "" #: shared-module/bitbangio/SPI.c msgid "MOSI pin init failed." msgstr "" #: shared-module/displayio/Shape.c #, c-format msgid "Maximum x value when mirrored is %d" msgstr "" #: supervisor/shared/safe_mode.c msgid "MicroPython NLR jump failed. Likely memory corruption." msgstr "" #: supervisor/shared/safe_mode.c msgid "MicroPython fatal error." msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "" #: ports/stm32f4/common-hal/busio/SPI.c msgid "Missing MISO or MOSI Pin" msgstr "" #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "" #: ports/stm32f4/common-hal/busio/SPI.c msgid "Must provide MISO or MOSI pin" msgstr "" #: shared-bindings/_pixelbuf/PixelBuf.c msgid "Negative step not supported" msgstr "" #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "No CCCD for this Characteristic" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c #: ports/stm32f4/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Shiver me timbers! There be no DAC on this chip" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "No DMA channel found" msgstr "" #: ports/stm32f4/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "" #: ports/stm32f4/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm32f4/common-hal/busio/UART.c msgid "No RX pin" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm32f4/common-hal/busio/UART.c msgid "No TX pin" msgstr "" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "No available clocks" msgstr "" #: shared-bindings/board/__init__.c msgid "No default %q bus" msgstr "" #: ports/atmel-samd/common-hal/touchio/TouchIn.c msgid "No free GCLKs" msgstr "" #: shared-bindings/os/__init__.c msgid "No hardware random available" msgstr "" #: ports/atmel-samd/common-hal/ps2io/Ps2.c msgid "No hardware support on clk pin" msgstr "" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "No hardware support on pin" msgstr "" #: ports/stm32f4/common-hal/pulseio/PWMOut.c msgid "No more timers available on this pin." msgstr "" #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "" #: py/moduerrno.c msgid "No space left on device" msgstr "" #: py/moduerrno.c msgid "No such file/directory" msgstr "" #: supervisor/shared/safe_mode.c msgid "Nordic Soft Device failure assertion." msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" msgstr "" #: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c #: shared-bindings/audiopwmio/PWMAudioOut.c msgid "Not playing" msgstr "" #: shared-bindings/util.c msgid "" "Object has been deinitialized and can no longer be used. Create a new object." msgstr "" #: ports/nrf/common-hal/busio/UART.c msgid "Odd parity is not supported" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Only 8 or 16 bit mono with " msgstr "" #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" "Only Windows format, uncompressed BMP supported: given header size is %d" msgstr "" #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" "Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: " "%d bpp given" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "" #: shared-bindings/pulseio/PWMOut.c msgid "" "PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)" msgstr "" #: shared-bindings/pulseio/PWMOut.c msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" #: ports/stm32f4/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "" #: py/moduerrno.c msgid "Permission denied" msgstr "" #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c #: ports/stm32f4/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Belay that! Th' Pin be not ADC capable" #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "" #: shared-bindings/ps2io/Ps2.c msgid "Pop from an empty Ps2 buffer" msgstr "" #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "" #: main.c msgid "Press any key to enter the REPL. Use CTRL-D to reload." msgstr "" #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "" #: ports/stm32f4/common-hal/pulseio/PulseIn.c msgid "PulseIn not yet supported" msgstr "" #: ports/stm32f4/common-hal/pulseio/PulseOut.c msgid "PulseOut not yet supported" msgstr "" #: ports/stm32f4/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "" #: ports/stm32f4/common-hal/os/__init__.c msgid "RNG Init Error" msgstr "" #: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c #: ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "" #: shared-bindings/time/__init__.c msgid "RTC is not supported on this board" msgstr "" #: ports/stm32f4/common-hal/os/__init__.c msgid "Random number generation error" msgstr "" #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "" #: extmod/vfs_fat.c py/moduerrno.c msgid "Read-only filesystem" msgstr "" #: shared-module/displayio/Bitmap.c msgid "Read-only object" msgstr "" #: shared-bindings/displayio/EPaperDisplay.c msgid "Refresh too soon" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Right channel unsupported" msgstr "" #: shared-bindings/_pew/PewPew.c msgid "Row entry must be digitalio.DigitalInOut" msgstr "" #: main.c msgid "Running in safe mode! Auto-reload is off.\n" msgstr "Runnin' in safe mode! Auto-reload be off.\n" #: main.c msgid "Running in safe mode! Not running saved code.\n" msgstr "Runnin' in safe mode! Nay runnin' saved code.\n" #: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "" #: ports/stm32f4/common-hal/busio/SPI.c msgid "SPI Init Error" msgstr "" #: ports/stm32f4/common-hal/busio/SPI.c msgid "SPI Re-initialization error" msgstr "" #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "" #: ports/atmel-samd/common-hal/audioio/AudioOut.c #, c-format msgid "Sample rate too high. It must be less than %d" msgstr "" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Scan already in progess. Stop with stop_scan." msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Serializer in use" msgstr "" #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "" #: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c #: shared-bindings/displayio/TileGrid.c shared-bindings/pulseio/PulseIn.c msgid "Slices not supported" msgstr "" #: extmod/modure.c msgid "Splitting with sub-captures" msgstr "" #: shared-bindings/supervisor/__init__.c msgid "Stack size must be at least 256" msgstr "" #: shared-bindings/multiterminal/__init__.c msgid "Stream missing readinto() or write() method." msgstr "" #: ports/stm32f4/common-hal/busio/UART.c msgid "Supply at least one UART pin" msgstr "" #: ports/stm32f4/common-hal/microcontroller/Processor.c msgid "Temperature read timed out" msgstr "" #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" "Please increase the stack size if you know how, or if not:" msgstr "" #: supervisor/shared/safe_mode.c msgid "" "The `microcontroller` module was used to boot into safe mode. Press reset to " "exit safe mode.\n" msgstr "" #: supervisor/shared/safe_mode.c msgid "" "The microcontroller's power dipped. Make sure your power supply provides\n" "enough power for the whole circuit and press reset (after ejecting " "CIRCUITPY).\n" msgstr "" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's bits_per_sample does not match the mixer's" msgstr "" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's channel count does not match the mixer's" msgstr "" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's sample rate does not match the mixer's" msgstr "" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's signedness does not match the mixer's" msgstr "" #: shared-bindings/displayio/TileGrid.c msgid "Tile height must exactly divide bitmap height" msgstr "" #: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c msgid "Tile index out of bounds" msgstr "" #: shared-bindings/displayio/TileGrid.c msgid "Tile value out of bounds" msgstr "" #: shared-bindings/displayio/TileGrid.c msgid "Tile width must exactly divide bitmap width" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "" #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c #: shared-bindings/displayio/ParallelBus.c msgid "Too many display busses" msgstr "" #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c msgid "Too many displays" msgstr "" #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "" #: shared-bindings/time/__init__.c msgid "Tuple or struct_time argument required" msgstr "" #: ports/stm32f4/common-hal/busio/UART.c msgid "UART Buffer allocation error" msgstr "" #: ports/stm32f4/common-hal/busio/UART.c msgid "UART De-init error" msgstr "" #: ports/stm32f4/common-hal/busio/UART.c msgid "UART Init Error" msgstr "" #: ports/stm32f4/common-hal/busio/UART.c msgid "UART Re-init error" msgstr "" #: ports/stm32f4/common-hal/busio/UART.c msgid "UART write error" msgstr "" #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "" #: shared-module/usb_hid/Device.c msgid "USB Error" msgstr "" #: shared-bindings/_bleio/UUID.c msgid "UUID integer value must be 0-0xffff" msgstr "" #: shared-bindings/_bleio/UUID.c msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'" msgstr "" #: shared-bindings/_bleio/UUID.c msgid "UUID value is not str, int or byte buffer" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Unable to allocate buffers for signed conversion" msgstr "" #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Unable to find free GCLK" msgstr "Arr! No free GCLK be in sight" #: py/parse.c msgid "Unable to init parser" msgstr "" #: shared-module/displayio/OnDiskBitmap.c msgid "Unable to read color palette data" msgstr "" #: shared-bindings/nvm/ByteArray.c msgid "Unable to write to nvm." msgstr "" #: ports/nrf/common-hal/_bleio/UUID.c msgid "Unexpected nrfx uuid type" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" msgstr "" #: supervisor/shared/safe_mode.c msgid "Unknown reason." msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown security error: 0x%04x" msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown soft device error: %04x" msgstr "" #: shared-bindings/_pixelbuf/PixelBuf.c #, c-format msgid "Unmatched number of items on RHS (expected %d, got %d)." msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c msgid "" "Unspecified issue. Can be that the pairing prompt on the other device was " "declined or ignored." msgstr "" #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "" #: shared-module/displayio/display_core.c msgid "Unsupported display bus type" msgstr "" #: shared-module/audiocore/WaveFile.c msgid "Unsupported format" msgstr "" #: py/moduerrno.c msgid "Unsupported operation" msgstr "" #: shared-bindings/digitalio/DigitalInOut.c msgid "Unsupported pull value." msgstr "" #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c msgid "Value length != required fixed length" msgstr "" #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c msgid "Value length > max_length" msgstr "" #: py/emitnative.c msgid "Viper functions don't currently support more than 4 arguments" msgstr "" #: ports/stm32f4/common-hal/microcontroller/Processor.c msgid "Voltage read timed out" msgstr "" #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "Blimey! Yer code filename has two extensions\n" #: py/builtinhelp.c #, c-format msgid "" "Welcome to Adafruit CircuitPython %s!\n" "\n" "Please visit learn.adafruit.com/category/circuitpython for project guides.\n" "\n" "To list built-in modules please do `help(\"modules\")`.\n" msgstr "" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "" #: supervisor/shared/safe_mode.c msgid "You are in safe mode: something unanticipated happened.\n" msgstr "" #: supervisor/shared/safe_mode.c msgid "You requested starting safe mode by " msgstr "" #: py/objtype.c msgid "__init__() should return None" msgstr "" #: py/objtype.c #, c-format msgid "__init__() should return None, not '%s'" msgstr "" #: py/objobject.c msgid "__new__ arg must be a user-type" msgstr "" #: extmod/modubinascii.c extmod/moduhashlib.c msgid "a bytes-like object is required" msgstr "" #: lib/embed/abort_.c msgid "abort() called" msgstr "" #: extmod/machine_mem.c #, c-format msgid "address %08x is not aligned to %d bytes" msgstr "" #: shared-bindings/i2cslave/I2CSlave.c msgid "address out of bounds" msgstr "" #: shared-bindings/i2cslave/I2CSlave.c msgid "addresses is empty" msgstr "" #: py/modbuiltins.c msgid "arg is an empty sequence" msgstr "" #: py/runtime.c msgid "argument has wrong type" msgstr "" #: py/argcheck.c shared-bindings/_stage/__init__.c #: shared-bindings/digitalio/DigitalInOut.c shared-bindings/gamepad/GamePad.c msgid "argument num/types mismatch" msgstr "" #: py/runtime.c msgid "argument should be a '%q' not a '%q'" msgstr "" #: py/objarray.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "" #: py/objstr.c msgid "attributes not supported yet" msgstr "" #: py/builtinevex.c msgid "bad compile mode" msgstr "" #: py/objstr.c msgid "bad conversion specifier" msgstr "" #: py/objstr.c msgid "bad format string" msgstr "" #: py/binary.c msgid "bad typecode" msgstr "" #: py/emitnative.c msgid "binary op %q not implemented" msgstr "" #: shared-bindings/busio/UART.c msgid "bits must be 7, 8 or 9" msgstr "" #: extmod/machine_spi.c msgid "bits must be 8" msgstr "pieces must be of 8" #: shared-bindings/audiomixer/Mixer.c msgid "bits_per_sample must be 8 or 16" msgstr "" #: py/emitinlinethumb.c msgid "branch not in range" msgstr "" #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "" #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "buffer slices must be of equal length" msgstr "" #: py/modstruct.c shared-bindings/struct/__init__.c #: shared-module/struct/__init__.c msgid "buffer too small" msgstr "" #: extmod/machine_spi.c msgid "buffers must be the same length" msgstr "yer buffers must be of the same length" #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "" #: py/vm.c msgid "byte code not implemented" msgstr "" #: shared-bindings/_pixelbuf/PixelBuf.c msgid "byteorder is not a string" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "" #: py/objstr.c msgid "bytes value out of range" msgstr "" #: ports/atmel-samd/bindings/samd/Clock.c msgid "calibration is out of range" msgstr "" #: ports/atmel-samd/bindings/samd/Clock.c msgid "calibration is read only" msgstr "" #: ports/atmel-samd/common-hal/rtc/RTC.c msgid "calibration value out of range +/-127" msgstr "" #: py/emitinlinethumb.c msgid "can only have up to 4 parameters to Thumb assembly" msgstr "" #: py/emitinlinextensa.c msgid "can only have up to 4 parameters to Xtensa assembly" msgstr "" #: py/persistentcode.c msgid "can only save bytecode" msgstr "" #: py/objtype.c msgid "can't add special method to already-subclassed class" msgstr "" #: py/compile.c msgid "can't assign to expression" msgstr "" #: py/obj.c #, c-format msgid "can't convert %s to complex" msgstr "" #: py/obj.c #, c-format msgid "can't convert %s to float" msgstr "" #: py/obj.c #, c-format msgid "can't convert %s to int" msgstr "" #: py/objstr.c msgid "can't convert '%q' object to %q implicitly" msgstr "" #: py/objint.c msgid "can't convert NaN to int" msgstr "" #: shared-bindings/i2cslave/I2CSlave.c msgid "can't convert address to int" msgstr "" #: py/objint.c msgid "can't convert inf to int" msgstr "" #: py/obj.c msgid "can't convert to complex" msgstr "" #: py/obj.c msgid "can't convert to float" msgstr "" #: py/obj.c msgid "can't convert to int" msgstr "" #: py/objstr.c msgid "can't convert to str implicitly" msgstr "" #: py/compile.c msgid "can't declare nonlocal in outer code" msgstr "" #: py/compile.c msgid "can't delete expression" msgstr "" #: py/emitnative.c msgid "can't do binary op between '%q' and '%q'" msgstr "" #: py/objcomplex.c msgid "can't do truncated division of a complex number" msgstr "" #: py/compile.c msgid "can't have multiple **x" msgstr "" #: py/compile.c msgid "can't have multiple *x" msgstr "" #: py/emitnative.c msgid "can't implicitly convert '%q' to 'bool'" msgstr "" #: py/emitnative.c msgid "can't load from '%q'" msgstr "" #: py/emitnative.c msgid "can't load with '%q' index" msgstr "" #: py/objgenerator.c msgid "can't pend throw to just-started generator" msgstr "" #: py/objgenerator.c msgid "can't send non-None value to a just-started generator" msgstr "" #: py/objnamedtuple.c msgid "can't set attribute" msgstr "" #: py/emitnative.c msgid "can't store '%q'" msgstr "" #: py/emitnative.c msgid "can't store to '%q'" msgstr "" #: py/emitnative.c msgid "can't store with '%q' index" msgstr "" #: py/objstr.c msgid "" "can't switch from automatic field numbering to manual field specification" msgstr "" #: py/objstr.c msgid "" "can't switch from manual field specification to automatic field numbering" msgstr "" #: py/objtype.c msgid "cannot create '%q' instances" msgstr "" #: py/objtype.c msgid "cannot create instance" msgstr "" #: py/runtime.c msgid "cannot import name %q" msgstr "" #: py/builtinimport.c msgid "cannot perform relative import" msgstr "" #: py/emitnative.c msgid "casting" msgstr "" #: shared-bindings/_stage/Text.c msgid "chars buffer too small" msgstr "" #: py/modbuiltins.c msgid "chr() arg not in range(0x110000)" msgstr "" #: py/modbuiltins.c msgid "chr() arg not in range(256)" msgstr "" #: shared-bindings/displayio/Palette.c msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)" msgstr "" #: shared-bindings/displayio/Palette.c msgid "color buffer must be a buffer, tuple, list, or int" msgstr "" #: shared-bindings/displayio/Palette.c msgid "color buffer must be a bytearray or array of type 'b' or 'B'" msgstr "" #: shared-bindings/displayio/Palette.c msgid "color must be between 0x000000 and 0xffffff" msgstr "" #: shared-bindings/displayio/ColorConverter.c msgid "color should be an int" msgstr "" #: py/objcomplex.c msgid "complex division by zero" msgstr "" #: py/objfloat.c py/parsenum.c msgid "complex values not supported" msgstr "" #: extmod/moduzlib.c msgid "compression header" msgstr "" #: py/parse.c msgid "constant must be an integer" msgstr "" #: py/emitnative.c msgid "conversion to object" msgstr "" #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" #: py/compile.c msgid "default 'except' must be last" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "" "destination buffer must be a bytearray or array of type 'B' for bit_depth = 8" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "destination buffer must be an array of type 'H' for bit_depth = 16" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "destination_length must be an int >= 0" msgstr "" #: py/objdict.c msgid "dict update sequence has wrong length" msgstr "" #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c #: shared-bindings/math/__init__.c msgid "division by zero" msgstr "" #: py/objdeque.c msgid "empty" msgstr "" #: extmod/moduheapq.c extmod/modutimeq.c msgid "empty heap" msgstr "" #: py/objstr.c msgid "empty separator" msgstr "" #: shared-bindings/random/__init__.c msgid "empty sequence" msgstr "" #: py/objstr.c msgid "end of format while looking for conversion specifier" msgstr "" #: shared-bindings/displayio/Shape.c msgid "end_x should be an int" msgstr "" #: ports/nrf/common-hal/busio/UART.c #, c-format msgid "error = 0x%08lX" msgstr "" #: py/runtime.c msgid "exceptions must derive from BaseException" msgstr "" #: py/objstr.c msgid "expected ':' after format specifier" msgstr "" #: py/obj.c msgid "expected tuple/list" msgstr "" #: py/modthread.c msgid "expecting a dict for keyword args" msgstr "" #: py/compile.c msgid "expecting an assembler instruction" msgstr "" #: py/compile.c msgid "expecting just a value for set" msgstr "" #: py/compile.c msgid "expecting key:value for dict" msgstr "" #: py/argcheck.c msgid "extra keyword arguments given" msgstr "" #: py/argcheck.c msgid "extra positional arguments given" msgstr "" #: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c #: shared-bindings/displayio/OnDiskBitmap.c msgid "file must be a file opened in byte mode" msgstr "" #: shared-bindings/storage/__init__.c msgid "filesystem must provide mount method" msgstr "" #: py/objtype.c msgid "first argument to super() must be type" msgstr "" #: extmod/machine_spi.c msgid "firstbit must be MSB" msgstr "" #: py/objint.c msgid "float too big" msgstr "" #: shared-bindings/_stage/Text.c msgid "font must be 2048 bytes long" msgstr "" #: py/objstr.c msgid "format requires a dict" msgstr "" #: py/objdeque.c msgid "full" msgstr "" #: py/argcheck.c msgid "function does not take keyword arguments" msgstr "" #: py/argcheck.c #, c-format msgid "function expected at most %d arguments, got %d" msgstr "" #: py/bc.c py/objnamedtuple.c msgid "function got multiple values for argument '%q'" msgstr "" #: py/argcheck.c #, c-format msgid "function missing %d required positional arguments" msgstr "" #: py/bc.c msgid "function missing keyword-only argument" msgstr "" #: py/bc.c msgid "function missing required keyword argument '%q'" msgstr "" #: py/bc.c #, c-format msgid "function missing required positional argument #%d" msgstr "" #: py/argcheck.c py/bc.c py/objnamedtuple.c #, c-format msgid "function takes %d positional arguments but %d were given" msgstr "" #: shared-bindings/time/__init__.c msgid "function takes exactly 9 arguments" msgstr "" #: py/objgenerator.c msgid "generator already executing" msgstr "" #: py/objgenerator.c msgid "generator ignored GeneratorExit" msgstr "" #: shared-bindings/_stage/Layer.c msgid "graphic must be 2048 bytes long" msgstr "" #: extmod/moduheapq.c msgid "heap must be a list" msgstr "" #: py/compile.c msgid "identifier redefined as global" msgstr "" #: py/compile.c msgid "identifier redefined as nonlocal" msgstr "" #: py/objstr.c msgid "incomplete format" msgstr "" #: py/objstr.c msgid "incomplete format key" msgstr "" #: extmod/modubinascii.c msgid "incorrect padding" msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "" #: py/obj.c msgid "indices must be integers" msgstr "" #: py/compile.c msgid "inline assembler must be a function" msgstr "" #: py/parsenum.c msgid "int() arg 2 must be >= 2 and <= 36" msgstr "" #: py/objstr.c msgid "integer required" msgstr "" #: shared-bindings/_bleio/Adapter.c #, c-format msgid "interval must be in range %s-%s" msgstr "" #: extmod/machine_i2c.c msgid "invalid I2C peripheral" msgstr "Belay that! I2C peripheral be invalid" #: extmod/machine_spi.c msgid "invalid SPI peripheral" msgstr "Arr! SPI peripheral be invalid" #: lib/netutils/netutils.c msgid "invalid arguments" msgstr "" #: extmod/modussl_axtls.c msgid "invalid cert" msgstr "" #: extmod/uos_dupterm.c msgid "invalid dupterm index" msgstr "" #: extmod/modframebuf.c msgid "invalid format" msgstr "" #: py/objstr.c msgid "invalid format specifier" msgstr "" #: extmod/modussl_axtls.c msgid "invalid key" msgstr "" #: py/compile.c msgid "invalid micropython decorator" msgstr "" #: shared-bindings/random/__init__.c msgid "invalid step" msgstr "" #: py/compile.c py/parse.c msgid "invalid syntax" msgstr "" #: py/parsenum.c msgid "invalid syntax for integer" msgstr "" #: py/parsenum.c #, c-format msgid "invalid syntax for integer with base %d" msgstr "" #: py/parsenum.c msgid "invalid syntax for number" msgstr "" #: py/objtype.c msgid "issubclass() arg 1 must be a class" msgstr "" #: py/objtype.c msgid "issubclass() arg 2 must be a class or a tuple of classes" msgstr "" #: py/objstr.c msgid "join expects a list of str/bytes objects consistent with self object" msgstr "" #: py/argcheck.c msgid "keyword argument(s) not yet implemented - use normal args instead" msgstr "" #: py/bc.c msgid "keywords must be strings" msgstr "" #: py/emitinlinethumb.c py/emitinlinextensa.c msgid "label '%q' not defined" msgstr "" #: py/compile.c msgid "label redefined" msgstr "" #: py/stream.c msgid "length argument not allowed for this type" msgstr "" #: shared-bindings/audiomixer/MixerVoice.c msgid "level must be between 0 and 1" msgstr "" #: py/objarray.c msgid "lhs and rhs should be compatible" msgstr "" #: py/emitnative.c msgid "local '%q' has type '%q' but source is '%q'" msgstr "" #: py/emitnative.c msgid "local '%q' used before type known" msgstr "" #: py/vm.c msgid "local variable referenced before assignment" msgstr "" #: py/objint.c msgid "long int not supported in this build" msgstr "" #: shared-bindings/_stage/Layer.c msgid "map buffer too small" msgstr "" #: py/modmath.c shared-bindings/math/__init__.c msgid "math domain error" msgstr "" #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c #, c-format msgid "max_length must be 0-%d when fixed_length is %s" msgstr "" #: py/runtime.c msgid "maximum recursion depth exceeded" msgstr "" #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" msgstr "" #: py/runtime.c msgid "memory allocation failed, heap is locked" msgstr "" #: py/builtinimport.c msgid "module not found" msgstr "" #: py/compile.c msgid "multiple *x in assignment" msgstr "" #: py/objtype.c msgid "multiple bases have instance lay-out conflict" msgstr "" #: py/objtype.c msgid "multiple inheritance not supported" msgstr "" #: py/emitnative.c msgid "must raise an object" msgstr "" #: extmod/machine_spi.c msgid "must specify all of sck/mosi/miso" msgstr "" #: py/modbuiltins.c msgid "must use keyword argument for key function" msgstr "" #: py/runtime.c msgid "name '%q' is not defined" msgstr "" #: py/runtime.c msgid "name not defined" msgstr "" #: py/compile.c msgid "name reused for argument" msgstr "" #: py/emitnative.c msgid "native yield" msgstr "" #: py/runtime.c #, c-format msgid "need more than %d values to unpack" msgstr "" #: py/objint_longlong.c py/objint_mpz.c py/runtime.c msgid "negative power with no float support" msgstr "" #: py/objint_mpz.c py/runtime.c msgid "negative shift count" msgstr "" #: py/vm.c msgid "no active exception to reraise" msgstr "" #: shared-bindings/socket/__init__.c shared-module/network/__init__.c msgid "no available NIC" msgstr "" #: py/compile.c msgid "no binding for nonlocal found" msgstr "" #: py/builtinimport.c msgid "no module named '%q'" msgstr "" #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c #: shared-bindings/displayio/ParallelBus.c msgid "no reset pin available" msgstr "" #: py/runtime.c msgid "no such attribute" msgstr "" #: ports/nrf/common-hal/_bleio/Connection.c msgid "non-UUID found in service_uuids_whitelist" msgstr "" #: py/compile.c msgid "non-default argument follows default argument" msgstr "" #: extmod/modubinascii.c msgid "non-hex digit found" msgstr "" #: py/compile.c msgid "non-keyword arg after */**" msgstr "" #: py/compile.c msgid "non-keyword arg after keyword arg" msgstr "" #: shared-bindings/_bleio/UUID.c msgid "not a 128-bit UUID" msgstr "" #: py/objstr.c msgid "not all arguments converted during string formatting" msgstr "" #: py/objstr.c msgid "not enough arguments for format string" msgstr "" #: py/obj.c #, c-format msgid "object '%s' is not a tuple or list" msgstr "" #: py/obj.c msgid "object does not support item assignment" msgstr "" #: py/obj.c msgid "object does not support item deletion" msgstr "" #: py/obj.c msgid "object has no len" msgstr "" #: py/obj.c msgid "object is not subscriptable" msgstr "" #: py/runtime.c msgid "object not an iterator" msgstr "" #: py/objtype.c py/runtime.c msgid "object not callable" msgstr "" #: py/sequence.c shared-bindings/displayio/Group.c msgid "object not in sequence" msgstr "" #: py/runtime.c msgid "object not iterable" msgstr "" #: py/obj.c #, c-format msgid "object of type '%s' has no len()" msgstr "" #: py/obj.c msgid "object with buffer protocol required" msgstr "" #: extmod/modubinascii.c msgid "odd-length string" msgstr "" #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "" #: ports/nrf/common-hal/audiobusio/PDMIn.c msgid "only bit_depth=16 is supported" msgstr "" #: ports/nrf/common-hal/audiobusio/PDMIn.c msgid "only sample_rate=16000 is supported" msgstr "" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "" #: py/modbuiltins.c msgid "ord expects a character" msgstr "" #: py/modbuiltins.c #, c-format msgid "ord() expected a character, but string of length %d found" msgstr "" #: py/objint_mpz.c msgid "overflow converting long int to machine word" msgstr "" #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "" #: shared-bindings/displayio/Palette.c msgid "palette_index should be an int" msgstr "" #: py/compile.c msgid "parameter annotation must be an identifier" msgstr "" #: py/emitinlinextensa.c msgid "parameters must be registers in sequence a2 to a5" msgstr "" #: py/emitinlinethumb.c msgid "parameters must be registers in sequence r0 to r3" msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "pixel coordinates out of bounds" msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "pixel value requires too many bits" msgstr "" #: shared-bindings/displayio/TileGrid.c msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter" msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "" #: py/objset.c msgid "pop from an empty set" msgstr "" #: py/objlist.c msgid "pop from empty list" msgstr "" #: py/objdict.c msgid "popitem(): dictionary is empty" msgstr "" #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" #: py/objint_mpz.c msgid "pow() with 3 arguments requires integers" msgstr "" #: extmod/modutimeq.c msgid "queue overflow" msgstr "" #: py/builtinimport.c msgid "relative import" msgstr "" #: py/obj.c #, c-format msgid "requested length %d but object has length %d" msgstr "" #: py/compile.c msgid "return annotation must be an identifier" msgstr "" #: py/emitnative.c msgid "return expected '%q' but got '%q'" msgstr "" #: py/objstr.c msgid "rsplit(None,n)" msgstr "" #: shared-bindings/audiocore/RawSample.c msgid "" "sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or " "'B'" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "sampling rate out of range" msgstr "" #: py/modmicropython.c msgid "schedule stack full" msgstr "" #: lib/utils/pyexec.c py/builtinimport.c msgid "script compilation not supported" msgstr "" #: py/objstr.c msgid "sign not allowed in string format specifier" msgstr "" #: py/objstr.c msgid "sign not allowed with integer format specifier 'c'" msgstr "" #: py/objstr.c msgid "single '}' encountered in format string" msgstr "" #: shared-bindings/time/__init__.c msgid "sleep length must be non-negative" msgstr "" #: py/objslice.c py/sequence.c msgid "slice step cannot be zero" msgstr "" #: py/objint.c py/sequence.c msgid "small int overflow" msgstr "" #: main.c msgid "soft reboot\n" msgstr "" #: py/objstr.c msgid "start/end indices" msgstr "" #: shared-bindings/displayio/Shape.c msgid "start_x should be an int" msgstr "" #: shared-bindings/random/__init__.c msgid "step must be non-zero" msgstr "" #: shared-bindings/busio/UART.c msgid "stop must be 1 or 2" msgstr "" #: shared-bindings/random/__init__.c msgid "stop not reachable from start" msgstr "" #: py/stream.c msgid "stream operation not supported" msgstr "" #: py/objstrunicode.c msgid "string index out of range" msgstr "" #: py/objstrunicode.c #, c-format msgid "string indices must be integers, not %s" msgstr "" #: py/stream.c msgid "string not supported; use bytes or bytearray" msgstr "" #: extmod/moductypes.c msgid "struct: cannot index" msgstr "" #: extmod/moductypes.c msgid "struct: index out of range" msgstr "" #: extmod/moductypes.c msgid "struct: no fields" msgstr "" #: py/objstr.c msgid "substring not found" msgstr "" #: py/compile.c msgid "super() can't find self" msgstr "" #: extmod/modujson.c msgid "syntax error in JSON" msgstr "" #: extmod/moductypes.c msgid "syntax error in uctypes descriptor" msgstr "" #: shared-bindings/touchio/TouchIn.c msgid "threshold must be in the range 0-65536" msgstr "" #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" msgstr "" #: shared-bindings/busio/UART.c msgid "timeout must be 0.0-100.0 seconds" msgstr "" #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "timeout must be >= 0.0" msgstr "" #: shared-bindings/time/__init__.c msgid "timestamp out of range for platform time_t" msgstr "" #: shared-module/struct/__init__.c msgid "too many arguments provided with the given format" msgstr "" #: py/runtime.c #, c-format msgid "too many values to unpack (expected %d)" msgstr "" #: py/objstr.c msgid "tuple index out of range" msgstr "" #: py/obj.c msgid "tuple/list has wrong length" msgstr "" #: shared-bindings/_pixelbuf/PixelBuf.c msgid "tuple/list required on RHS" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "tx and rx cannot both be None" msgstr "" #: py/objtype.c msgid "type '%q' is not an acceptable base type" msgstr "" #: py/objtype.c msgid "type is not an acceptable base type" msgstr "" #: py/runtime.c msgid "type object '%q' has no attribute '%q'" msgstr "" #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "" #: py/objint_longlong.c msgid "ulonglong too large" msgstr "" #: py/emitnative.c msgid "unary op %q not implemented" msgstr "" #: py/parse.c msgid "unexpected indent" msgstr "" #: py/bc.c msgid "unexpected keyword argument" msgstr "" #: py/bc.c py/objnamedtuple.c msgid "unexpected keyword argument '%q'" msgstr "" #: py/lexer.c msgid "unicode name escapes" msgstr "" #: py/parse.c msgid "unindent does not match any outer indentation level" msgstr "" #: py/objstr.c #, c-format msgid "unknown conversion specifier %c" msgstr "" #: py/objstr.c #, c-format msgid "unknown format code '%c' for object of type '%s'" msgstr "" #: py/compile.c msgid "unknown type" msgstr "" #: py/emitnative.c msgid "unknown type '%q'" msgstr "" #: py/objstr.c msgid "unmatched '{' in format" msgstr "" #: py/objtype.c py/runtime.c msgid "unreadable attribute" msgstr "" #: shared-bindings/displayio/TileGrid.c msgid "unsupported %q type" msgstr "" #: py/emitinlinethumb.c #, c-format msgid "unsupported Thumb instruction '%s' with %d arguments" msgstr "" #: py/emitinlinextensa.c #, c-format msgid "unsupported Xtensa instruction '%s' with %d arguments" msgstr "" #: py/objstr.c #, c-format msgid "unsupported format character '%c' (0x%x) at index %d" msgstr "" #: py/runtime.c msgid "unsupported type for %q: '%s'" msgstr "" #: py/runtime.c msgid "unsupported type for operator" msgstr "" #: py/runtime.c msgid "unsupported types for %q: '%s', '%s'" msgstr "" #: py/objint.c #, c-format msgid "value must fit in %d byte(s)" msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "value_count must be > 0" msgstr "" #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "" #: py/objstr.c msgid "wrong number of arguments" msgstr "" #: py/runtime.c msgid "wrong number of values to unpack" msgstr "" #: shared-module/displayio/Shape.c msgid "x value out of bounds" msgstr "" #: shared-bindings/displayio/Shape.c msgid "y should be an int" msgstr "" #: shared-module/displayio/Shape.c msgid "y value out of bounds" msgstr "" #: py/objrange.c msgid "zero step" msgstr "" #~ msgid "All event channels " #~ msgstr "Avast! All th' event channels " #~ msgid "All timers " #~ msgstr "Heave-to! All th' timers be used" #~ msgid "Clock unit " #~ msgstr "Blimey! Clock unit " #~ msgid "DAC already " #~ msgstr "Blimey! DAC already under sail" #~ msgid "Invalid clock pin" #~ msgstr "Avast! Clock pin be invalid"