/** ****************************************************************************** * @file STM324x7i_eval.h * @author MCD Application Team * @version V1.0.0 * @date 11-January-2013 * @brief This file contains definitions for STM324x7I_EVAL's Leds, push-buttons * and COM ports hardware resources. ****************************************************************************** * @attention * *

© COPYRIGHT 2013 STMicroelectronics

* * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License"); * You may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.st.com/software_license_agreement_liberty_v2 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM324x7I_EVAL_H #define __STM324x7I_EVAL_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx.h" #include "mpconfig.h" /** * @brief SD FLASH SDIO Interface */ #if defined(PYBOARD3) #define SD_DETECT_PIN GPIO_Pin_13 /* PC.13 */ #define SD_DETECT_GPIO_PORT GPIOC /* GPIOC */ #define SD_DETECT_GPIO_CLK RCC_AHB1Periph_GPIOC #elif defined(PYBOARD4) #define SD_DETECT_PIN GPIO_Pin_8 /* PA..8 */ #define SD_DETECT_GPIO_PORT GPIOA /* GPIOA */ #define SD_DETECT_GPIO_CLK RCC_AHB1Periph_GPIOA #elif defined(STM32F4DISC) // PB15 on the DM-STSTF4BB Base Board #define SD_DETECT_PIN GPIO_Pin_15 /* PB.15 */ #define SD_DETECT_GPIO_PORT GPIOB /* GPIOB */ #define SD_DETECT_GPIO_CLK RCC_AHB1Periph_GPIOB #elif defined(NETDUINO_PLUS_2) #define SD_DETECT_PIN GPIO_Pin_5 /* PB.5 */ #define SD_DETECT_GPIO_PORT GPIOB /* GPIOB */ #define SD_DETECT_GPIO_CLK RCC_AHB1Periph_GPIOB #endif #define SDIO_FIFO_ADDRESS ((uint32_t)0x40012C80) /** * @brief SDIO Intialization Frequency (400KHz max) */ #define SDIO_INIT_CLK_DIV ((uint8_t)0x76) /** * @brief SDIO Data Transfer Frequency (25MHz max) */ #define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0) #define SD_SDIO_DMA DMA2 #define SD_SDIO_DMA_CLK RCC_AHB1Periph_DMA2 #define SD_SDIO_DMA_STREAM3 3 //#define SD_SDIO_DMA_STREAM6 6 #ifdef SD_SDIO_DMA_STREAM3 #define SD_SDIO_DMA_STREAM DMA2_Stream3 #define SD_SDIO_DMA_CHANNEL DMA_Channel_4 #define SD_SDIO_DMA_FLAG_FEIF DMA_FLAG_FEIF3 #define SD_SDIO_DMA_FLAG_DMEIF DMA_FLAG_DMEIF3 #define SD_SDIO_DMA_FLAG_TEIF DMA_FLAG_TEIF3 #define SD_SDIO_DMA_FLAG_HTIF DMA_FLAG_HTIF3 #define SD_SDIO_DMA_FLAG_TCIF DMA_FLAG_TCIF3 #define SD_SDIO_DMA_IRQn DMA2_Stream3_IRQn #define SD_SDIO_DMA_IRQHANDLER DMA2_Stream3_IRQHandler #elif defined SD_SDIO_DMA_STREAM6 #define SD_SDIO_DMA_STREAM DMA2_Stream6 #define SD_SDIO_DMA_CHANNEL DMA_Channel_4 #define SD_SDIO_DMA_FLAG_FEIF DMA_FLAG_FEIF6 #define SD_SDIO_DMA_FLAG_DMEIF DMA_FLAG_DMEIF6 #define SD_SDIO_DMA_FLAG_TEIF DMA_FLAG_TEIF6 #define SD_SDIO_DMA_FLAG_HTIF DMA_FLAG_HTIF6 #define SD_SDIO_DMA_FLAG_TCIF DMA_FLAG_TCIF6 #define SD_SDIO_DMA_IRQn DMA2_Stream6_IRQn #define SD_SDIO_DMA_IRQHANDLER DMA2_Stream6_IRQHandler #endif /* SD_SDIO_DMA_STREAM3 */ /** @defgroup STM324x7I_EVAL_LOW_LEVEL_Exported_Functions * @{ */ void SD_LowLevel_DeInit(void); void SD_LowLevel_Init(void); void SD_LowLevel_DMA_TxConfig(uint32_t *BufferSRC, uint32_t BufferSize); void SD_LowLevel_DMA_RxConfig(uint32_t *BufferDST, uint32_t BufferSize); #ifdef __cplusplus } #endif #endif /* __STM324x7I_EVAL_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/