# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "PO-Revision-Date: 2021-03-25 23:30+0000\n" "Last-Translator: Gareth Coleman \n" "Language-Team: none\n" "Language: en_GB\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Generator: Weblate 4.5.2-dev\n" #: main.c msgid "" "\n" "Code done running.\n" msgstr "" "\n" "Code done running.\n" #: main.c msgid "" "\n" "Code stopped by auto-reload.\n" msgstr "" "\n" "Code stopped by auto-reload.\n" #: supervisor/shared/safe_mode.c msgid "" "\n" "Please file an issue with the contents of your CIRCUITPY drive at \n" "https://github.com/adafruit/circuitpython/issues\n" msgstr "" "\n" "Please file an issue with the contents of your CIRCUITPY drive at \n" "https://github.com/adafruit/circuitpython/issues\n" #: py/obj.c msgid " File \"%q\"" msgstr " File \"%q\"" #: py/obj.c msgid " File \"%q\", line %d" msgstr " File \"%q\", line %d" #: py/builtinhelp.c msgid " is of type %q\n" msgstr " is of type %q\n" #: main.c msgid " output:\n" msgstr " output:\n" #: py/objstr.c #, c-format msgid "%%c requires int or char" msgstr "%%c requires int or char" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "" "%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d" msgstr "" "%d address pins, %d rgb pins and %d tiles indicate a height of %d, not %d" #: ports/atmel-samd/common-hal/sdioio/SDCard.c msgid "%q failure: %d" msgstr "%q failure: %d" #: shared-bindings/microcontroller/Pin.c msgid "%q in use" msgstr "%q in use" #: extmod/moductypes.c ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c py/objstr.c #: py/objstrunicode.c msgid "%q index out of range" msgstr "%q index out of range" #: py/obj.c msgid "%q indices must be integers, not %q" msgstr "%q indices must be integers, not %q" #: shared-bindings/vectorio/Polygon.c msgid "%q list must be a list" msgstr "%q list must be a list" #: shared-bindings/memorymonitor/AllocationAlarm.c msgid "%q must be >= 0" msgstr "%q must be >= 0" #: shared-bindings/_bleio/CharacteristicBuffer.c #: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c #: shared-bindings/displayio/Shape.c #: shared-bindings/memorymonitor/AllocationAlarm.c #: shared-bindings/vectorio/Circle.c shared-bindings/vectorio/Rectangle.c msgid "%q must be >= 1" msgstr "%q must be >= 1" #: shared-module/vectorio/Polygon.c msgid "%q must be a tuple of length 2" msgstr "%q must be a tuple of length 2" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #: shared-bindings/canio/Match.c msgid "%q out of range" msgstr "%q out of range" #: ports/atmel-samd/common-hal/microcontroller/Pin.c msgid "%q pin invalid" msgstr "%q pin invalid" #: shared-bindings/fontio/BuiltinFont.c msgid "%q should be an int" msgstr "%q should be an int" #: py/bc.c py/objnamedtuple.c msgid "%q() takes %d positional arguments but %d were given" msgstr "%q() takes %d positional arguments but %d were given" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c #, c-format msgid "%s error 0x%x" msgstr "%s error 0x%x" #: py/argcheck.c msgid "'%q' argument required" msgstr "'%q' argument required" #: py/runtime.c msgid "'%q' object cannot assign attribute '%q'" msgstr "'%q' object cannot assign attribute '%q'" #: py/proto.c msgid "'%q' object does not support '%q'" msgstr "'%q' object does not support '%q'" #: py/obj.c msgid "'%q' object does not support item assignment" msgstr "'%q' object does not support item assignment" #: py/obj.c msgid "'%q' object does not support item deletion" msgstr "'%q' object does not support item deletion" #: py/runtime.c msgid "'%q' object has no attribute '%q'" msgstr "'%q' object has no attribute '%q'" #: py/runtime.c msgid "'%q' object is not an iterator" msgstr "'%q' object is not an iterator" #: py/objtype.c py/runtime.c msgid "'%q' object is not callable" msgstr "'%q' object is not callable" #: py/runtime.c msgid "'%q' object is not iterable" msgstr "'%q' object is not iterable" #: py/obj.c msgid "'%q' object is not subscriptable" msgstr "'%q' object is not subscriptable" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects a label" msgstr "'%s' expects a label" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects a register" msgstr "'%s' expects a register" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects a special register" msgstr "'%s' expects a special register" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects an FPU register" msgstr "'%s' expects an FPU register" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects an address of the form [a, b]" msgstr "'%s' expects an address of the form [a, b]" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects an integer" msgstr "'%s' expects an integer" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects at most r%d" msgstr "'%s' expects at most r%d" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects {r0, r1, ...}" msgstr "'%s' expects {r0, r1, ...}" #: py/emitinlinextensa.c #, c-format msgid "'%s' integer %d is not within range %d..%d" msgstr "'%s' integer %d is not within range %d..%d" #: py/emitinlinethumb.c #, c-format msgid "'%s' integer 0x%x does not fit in mask 0x%x" msgstr "'%s' integer 0x%x does not fit in mask 0x%x" #: py/objstr.c msgid "'=' alignment not allowed in string format specifier" msgstr "'=' alignment not allowed in string format specifier" #: shared-module/struct/__init__.c msgid "'S' and 'O' are not supported format types" msgstr "'S' and 'O' are not supported format types" #: py/compile.c msgid "'align' requires 1 argument" msgstr "'align' requires 1 argument" #: py/compile.c msgid "'await' outside function" msgstr "'await' outside function" #: py/compile.c msgid "'await', 'async for' or 'async with' outside async function" msgstr "'await', 'async for' or 'async with' outside async function" #: py/compile.c msgid "'break' outside loop" msgstr "'break' outside loop" #: py/compile.c msgid "'continue' outside loop" msgstr "'continue' outside loop" #: py/objgenerator.c msgid "'coroutine' object is not an iterator" msgstr "'coroutine' object is not an iterator" #: py/compile.c msgid "'data' requires at least 2 arguments" msgstr "'data' requires at least 2 arguments" #: py/compile.c msgid "'data' requires integer arguments" msgstr "'data' requires integer arguments" #: py/compile.c msgid "'label' requires 1 argument" msgstr "'label' requires 1 argument" #: py/compile.c msgid "'return' outside function" msgstr "'return' outside function" #: py/compile.c msgid "'yield from' inside async function" msgstr "'yield from' inside async function" #: py/compile.c msgid "'yield' outside function" msgstr "'yield' outside function" #: py/compile.c msgid "*x must be assignment target" msgstr "*x must be assignment target" #: py/obj.c msgid ", in %q\n" msgstr ", in %q\n" #: py/objcomplex.c msgid "0.0 to a complex power" msgstr "0.0 to a complex power" #: py/modbuiltins.c msgid "3-arg pow() not supported" msgstr "3-arg pow() not supported" #: shared-module/msgpack/__init__.c msgid "64 bit types" msgstr "64 bit types" #: ports/atmel-samd/common-hal/countio/Counter.c #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c msgid "A hardware interrupt channel is already in use" msgstr "A hardware interrupt channel is already in use" #: ports/esp32s2/common-hal/analogio/AnalogIn.c msgid "ADC2 is being used by WiFi" msgstr "ADC2 is being used by WiFi" #: shared-bindings/_bleio/Address.c shared-bindings/ipaddress/IPv4Address.c #, c-format msgid "Address must be %d bytes long" msgstr "Address must be %d bytes long" #: shared-bindings/_bleio/Address.c msgid "Address type out of range" msgstr "Address type out of range" #: ports/esp32s2/common-hal/canio/CAN.c msgid "All CAN peripherals are in use" msgstr "All CAN peripherals are in use" #: ports/esp32s2/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "All I2C peripherals are in use" #: ports/esp32s2/common-hal/countio/Counter.c #: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c #: ports/esp32s2/common-hal/rotaryio/IncrementalEncoder.c msgid "All PCNT units in use" msgstr "All PCNT units in use" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "All RX FIFOs in use" msgstr "All RX FIFOs in use" #: ports/esp32s2/common-hal/busio/SPI.c ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "All SPI peripherals are in use" #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/raspberrypi/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "All UART peripherals are in use" #: shared-bindings/pwmio/PWMOut.c msgid "All channels in use" msgstr "All channels in use" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "All event channels in use" msgstr "All event channels in use" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "All state machines in use" msgstr "All state machines in use" #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "All sync event channels in use" #: shared-bindings/pwmio/PWMOut.c msgid "All timers for this pin are in use" msgstr "All timers for this pin are in use" #: ports/atmel-samd/common-hal/_pew/PewPew.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c #: ports/esp32s2/common-hal/neopixel_write/__init__.c #: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/esp32s2/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c #: ports/stm/peripherals/timers.c shared-bindings/pwmio/PWMOut.c msgid "All timers in use" msgstr "All timers in use" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Already advertising." msgstr "Already advertising." #: ports/atmel-samd/common-hal/canio/Listener.c msgid "Already have all-matches listener" msgstr "Already have all-matches listener" #: shared-module/memorymonitor/AllocationAlarm.c #: shared-module/memorymonitor/AllocationSize.c msgid "Already running" msgstr "Already running" #: ports/esp32s2/common-hal/wifi/Radio.c msgid "Already scanning for wifi networks" msgstr "Already scanning for WiFi networks" #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "AnalogIn not supported on given pin" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c #: ports/raspberrypi/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "AnalogOut functionality not supported" #: shared-bindings/analogio/AnalogOut.c msgid "AnalogOut is only 16 bits. Value must be less than 65536." msgstr "AnalogOut is only 16 bits. Value must be less than 65536." #: ports/atmel-samd/common-hal/analogio/AnalogOut.c msgid "AnalogOut not supported on given pin" msgstr "AnalogOut not supported on given pin" #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c msgid "Another send is already active" msgstr "Another send is already active" #: shared-bindings/pulseio/PulseOut.c msgid "Array must contain halfwords (type 'H')" msgstr "Array must contain halfwords (type 'H')" #: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Array values should be single bytes." #: shared-bindings/microcontroller/Pin.c msgid "At most %d %q may be specified (not %d)" msgstr "At most %d %q may be specified (not %d)" #: shared-module/memorymonitor/AllocationAlarm.c #, c-format msgid "Attempt to allocate %d blocks" msgstr "Attempt to allocate %d blocks" #: supervisor/shared/safe_mode.c #, fuzzy msgid "Attempted heap allocation when MicroPython VM not running." msgstr "Attempted heap allocation when CircuitPython VM not running." #: shared-bindings/wifi/Radio.c msgid "Authentication failure" msgstr "Authentication failure" #: main.c msgid "Auto-reload is off.\n" msgstr "Auto-reload is off.\n" #: main.c msgid "" "Auto-reload is on. Simply save files over USB to run them or enter REPL to " "disable.\n" msgstr "" "Auto-reload is on. Simply save files over USB to run them or enter REPL to " "disable.\n" #: ports/esp32s2/common-hal/canio/CAN.c msgid "Baudrate not supported by peripheral" msgstr "Baudrate not supported by peripheral" #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" msgstr "Below minimum frame rate" #: ports/raspberrypi/common-hal/audiobusio/I2SOut.c msgid "Bit clock and word select must be sequential pins" msgstr "Bit clock and word select must be sequential pins" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Bit clock and word select must share a clock unit" msgstr "Bit clock and word select must share a clock unit" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Bit depth must be from 1 to 6 inclusive, not %d" msgstr "Bit depth must be from 1 to 6 inclusive, not %d" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bit depth must be multiple of 8." #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Both RX and TX required for flow control" msgstr "Both RX and TX required for flow control" #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c msgid "Both pins must support hardware interrupts" msgstr "Both pins must support hardware interrupts" #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "Brightness must be 0-1.0" msgstr "Brightness must be 0-1.0" #: shared-bindings/supervisor/__init__.c msgid "Brightness must be between 0 and 255" msgstr "Brightness must be between 0 and 255" #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Brightness not adjustable" msgstr "Brightness not adjustable" #: shared-bindings/_bleio/UUID.c #, c-format msgid "Buffer + offset too small %d %d %d" msgstr "Buffer + offset too small %d %d %d" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Buffer elements must be 4 bytes long or less" msgstr "Buffer elements must be 4 bytes long or less" #: shared-module/usb_hid/Device.c #, c-format msgid "Buffer incorrect size. Should be %d bytes." msgstr "Buffer incorrect size. Should be %d bytes." #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Buffer is not a bytearray." msgstr "Buffer is not a bytearray." #: ports/cxd56/common-hal/camera/Camera.c shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Buffer is too small" msgstr "Buffer is too small" #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #, c-format msgid "Buffer length %d too big. It must be less than %d" msgstr "Buffer length %d too big. It must be less than %d" #: ports/atmel-samd/common-hal/sdioio/SDCard.c #: ports/cxd56/common-hal/sdioio/SDCard.c shared-module/sdcardio/SDCard.c msgid "Buffer length must be a multiple of 512" msgstr "Buffer length must be a multiple of 512" #: ports/stm/common-hal/sdioio/SDCard.c msgid "Buffer must be a multiple of 512 bytes" msgstr "Buffer must be a multiple of 512 bytes" #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c msgid "Buffer must be at least length 1" msgstr "Buffer must be at least length 1" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Buffer too large and unable to allocate" msgstr "Buffer too large and unable to allocate" #: shared-bindings/_bleio/PacketBuffer.c #, c-format msgid "Buffer too short by %d bytes" msgstr "Buffer too short by %d bytes" #: ports/atmel-samd/common-hal/displayio/ParallelBus.c #: ports/esp32s2/common-hal/displayio/ParallelBus.c #: ports/nrf/common-hal/displayio/ParallelBus.c #: ports/raspberrypi/common-hal/displayio/ParallelBus.c #, c-format msgid "Bus pin %d is already in use" msgstr "Bus pin %d is already in use" #: shared-bindings/_bleio/UUID.c msgid "Byte buffer must be 16 bytes." msgstr "Byte buffer must be 16 bytes." #: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c msgid "Bytes must be between 0 and 255." msgstr "Bytes must be between 0 and 255." #: shared-bindings/aesio/aes.c msgid "CBC blocks must be multiples of 16 bytes" msgstr "CBC blocks must be multiples of 16 bytes" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "CRC or checksum was invalid" msgstr "CRC or checksum was invalid" #: py/objtype.c msgid "Call super().__init__() before accessing native object." msgstr "Call super().__init__() before accessing native object." #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on RTC IO from deep sleep." msgstr "Can only alarm on RTC IO from deep sleep." #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on one low pin while others alarm high from deep sleep." msgstr "Can only alarm on one low pin while others alarm high from deep sleep." #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Can only alarm on two low pins from deep sleep." msgstr "Can only alarm on two low pins from deep sleep." #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "Can't set CCCD on local Characteristic" msgstr "Can't set CCCD on local Characteristic" #: shared-bindings/_bleio/Adapter.c msgid "Cannot create a new Adapter; use _bleio.adapter;" msgstr "Cannot create a new Adapter; use _bleio.adapter;" #: shared-bindings/displayio/Bitmap.c #: shared-bindings/memorymonitor/AllocationSize.c #: shared-bindings/pulseio/PulseIn.c msgid "Cannot delete values" msgstr "Cannot delete values" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c #: ports/raspberrypi/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "Cannot get pull while in output mode" #: ports/nrf/common-hal/microcontroller/Processor.c msgid "Cannot get temperature" msgstr "Cannot get temperature" #: shared-bindings/_bleio/Adapter.c msgid "Cannot have scan responses for extended, connectable advertisements." msgstr "Cannot have scan responses for extended, connectable advertisements." #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Cannot output both channels on the same pin" msgstr "Cannot output both channels on the same pin" #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Cannot pull on input-only pin." msgstr "Cannot pull on input-only pin." #: shared-module/bitbangio/SPI.c msgid "Cannot read without MISO pin." msgstr "Cannot read without MISO pin." #: shared-bindings/audiobusio/PDMIn.c msgid "Cannot record to a file" msgstr "Cannot record to a file" #: shared-module/storage/__init__.c msgid "Cannot remount '/' when USB is active." msgstr "Cannot remount '/' when USB is active." #: ports/atmel-samd/common-hal/microcontroller/__init__.c #: ports/cxd56/common-hal/microcontroller/__init__.c #: ports/mimxrt10xx/common-hal/microcontroller/__init__.c msgid "Cannot reset into bootloader because no bootloader is present." msgstr "Cannot reset into bootloader because no bootloader is present." #: ports/esp32s2/common-hal/socketpool/Socket.c msgid "Cannot set socket options" msgstr "Cannot set socket options" #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Cannot set value when direction is input." #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "Cannot specify RTS or CTS in RS485 mode" #: py/objslice.c msgid "Cannot subclass slice" msgstr "Cannot subclass slice" #: shared-module/bitbangio/SPI.c msgid "Cannot transfer without MOSI and MISO pins." msgstr "Cannot transfer without MOSI and MISO pins." #: extmod/moductypes.c msgid "Cannot unambiguously get sizeof scalar" msgstr "Cannot unambiguously get sizeof scalar" #: shared-bindings/pwmio/PWMOut.c msgid "Cannot vary frequency on a timer that is already in use" msgstr "Cannot vary frequency on a timer that is already in use" #: ports/esp32s2/common-hal/alarm/pin/PinAlarm.c msgid "Cannot wake on pin edge. Only level." msgstr "Cannot wake on pin edge. Only level." #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "Cannot write without MOSI pin." #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "CharacteristicBuffer writing not provided" msgstr "CharacteristicBuffer writing not provided" #: supervisor/shared/safe_mode.c msgid "CircuitPython core code crashed hard. Whoops!\n" msgstr "CircuitPython core code crashed hard. Crikey!\n" #: supervisor/shared/safe_mode.c msgid "" "CircuitPython is in safe mode because you pressed the reset button during " "boot. Press again to exit safe mode.\n" msgstr "" "CircuitPython is in safe mode because you pressed the reset button during " "boot. Press again to exit safe mode.\n" #: supervisor/shared/safe_mode.c msgid "CircuitPython was unable to allocate the heap.\n" msgstr "CircuitPython was unable to allocate the heap.\n" #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Clock pin init failed." #: shared-module/bitbangio/I2C.c msgid "Clock stretch too long" msgstr "Clock stretch too long" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Clock unit in use" msgstr "Clock unit in use" #: shared-bindings/_pew/PewPew.c msgid "Column entry must be digitalio.DigitalInOut" msgstr "Column entry must be digitalio.DigitalInOut" #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c #: shared-bindings/displayio/ParallelBus.c msgid "Command must be an int between 0 and 255" msgstr "Command must be an int between 0 and 255" #: shared-bindings/_bleio/Connection.c msgid "" "Connection has been disconnected and can no longer be used. Create a new " "connection." msgstr "" "Connection has been disconnected and can no longer be used. Create a new " "connection." #: py/persistentcode.c msgid "Corrupt .mpy file" msgstr "Corrupt .mpy file" #: py/emitglue.c msgid "Corrupt raw code" msgstr "Corrupt raw code" #: ports/cxd56/common-hal/camera/Camera.c msgid "Could not initialize Camera" msgstr "Could not initialise camera" #: ports/cxd56/common-hal/gnss/GNSS.c msgid "Could not initialize GNSS" msgstr "Could not initialise GNSS" #: ports/cxd56/common-hal/sdioio/SDCard.c msgid "Could not initialize SDCard" msgstr "Could not initialise SDCard" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "Could not initialise UART" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not re-init channel" msgstr "Could not reinit channel" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not re-init timer" msgstr "Could not reinit timer" #: ports/stm/common-hal/pwmio/PWMOut.c msgid "Could not restart PWM" msgstr "Could not restart PWM" #: ports/esp32s2/common-hal/neopixel_write/__init__.c msgid "Could not retrieve clock" msgstr "Could not retrieve clock" #: shared-bindings/_bleio/Adapter.c msgid "Could not set address" msgstr "Could not set address" #: shared-bindings/pwmio/PWMOut.c msgid "Could not start PWM" msgstr "Could not start PWM" #: ports/stm/common-hal/busio/UART.c msgid "Could not start interrupt, RX busy" msgstr "Could not start interrupt, RX busy" #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "Couldn't allocate decoder" #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate first buffer" msgstr "Couldn't allocate first buffer" #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate input buffer" msgstr "Couldn't allocate input buffer" #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate second buffer" msgstr "Couldn't allocate second buffer" #: supervisor/shared/safe_mode.c msgid "Crash into the HardFault_Handler." msgstr "Crash into the HardFault_Handler." #: ports/stm/common-hal/analogio/AnalogOut.c msgid "DAC Channel Init Error" msgstr "DAC channel init error" #: ports/stm/common-hal/analogio/AnalogOut.c msgid "DAC Device Init Error" msgstr "DAC device init error" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "DAC already in use" #: ports/atmel-samd/common-hal/displayio/ParallelBus.c #: ports/nrf/common-hal/displayio/ParallelBus.c msgid "Data 0 pin must be byte aligned" msgstr "Data 0 pin must be byte aligned" #: ports/esp32s2/common-hal/displayio/ParallelBus.c msgid "Data 0 pin must be byte aligned." msgstr "Data 0 pin must be byte aligned." #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" msgstr "Data chunk must follow fmt chunk" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Data too large for advertisement packet" msgstr "Data too large for advertisement packet" #: shared-bindings/audiobusio/PDMIn.c msgid "Destination capacity is smaller than destination_length." msgstr "Destination capacity is smaller than destination_length." #: ports/nrf/common-hal/audiobusio/I2SOut.c msgid "Device in use" msgstr "Device in use" #: ports/cxd56/common-hal/digitalio/DigitalInOut.c msgid "DigitalInOut not supported on given pin" msgstr "DigitalInOut not supported on given pin" #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Display must have a 16 bit colorspace." msgstr "Display must have a 16 bit colourspace." #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Display rotation must be in 90 degree increments" msgstr "Display rotation must be in 90 degree increments" #: shared-bindings/digitalio/DigitalInOut.c msgid "Drive mode not used when direction is input." msgstr "Drive mode not used when direction is input." #: shared-bindings/aesio/aes.c msgid "ECB only operates on 16 bytes at a time" msgstr "ECB only operates on 16 bytes at a time" #: ports/esp32s2/common-hal/busio/SPI.c ports/esp32s2/common-hal/canio/CAN.c msgid "ESP-IDF memory allocation failed" msgstr "ESP-IDF memory allocation failed" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c msgid "EXTINT channel already in use" msgstr "EXTINT channel already in use" #: extmod/modure.c msgid "Error in regex" msgstr "Error in regex" #: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "Error: Failure to bind" msgstr "Error: Failure to bind" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c py/enum.c #: shared-bindings/_bleio/__init__.c shared-bindings/aesio/aes.c #: shared-bindings/busio/SPI.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Expected a %q" #: shared-bindings/_bleio/CharacteristicBuffer.c #: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c msgid "Expected a Characteristic" msgstr "Expected a Characteristic" #: shared-bindings/_bleio/Adapter.c msgid "Expected a DigitalInOut" msgstr "Expected a DigitalInOut" #: shared-bindings/_bleio/Characteristic.c msgid "Expected a Service" msgstr "Expected a service" #: shared-bindings/_bleio/Adapter.c msgid "Expected a UART" msgstr "Expected a UART" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c #: shared-bindings/_bleio/Service.c msgid "Expected a UUID" msgstr "Expected a UUID" #: shared-bindings/_bleio/Adapter.c msgid "Expected an Address" msgstr "Expected an address" #: shared-bindings/alarm/__init__.c msgid "Expected an alarm" msgstr "Expected an alarm" #: shared-module/_pixelbuf/PixelBuf.c #, c-format msgid "Expected tuple of length %d, got %d" msgstr "Expected tuple of length %d, got %d" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Extended advertisements with scan response not supported." msgstr "Extended advertisements with scan response not supported." #: extmod/ulab/code/numpy/fft/fft_tools.c msgid "FFT is defined for ndarrays only" msgstr "FFT is defined for ndarrays only" #: extmod/ulab/code/numpy/fft/fft_tools.c msgid "FFT is implemented for linear arrays only" msgstr "FFT is implemented for linear arrays only" #: ports/esp32s2/common-hal/ssl/SSLSocket.c msgid "Failed SSL handshake" msgstr "Failed SSL handshake" #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "Failed sending command." #: ports/nrf/sd_mutex.c #, c-format msgid "Failed to acquire mutex, err 0x%04x" msgstr "Failed to acquire mutex, err 0x%04x" #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/raspberrypi/common-hal/busio/UART.c msgid "Failed to allocate RX buffer" msgstr "Failed to allocate RX buffer" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/esp32s2/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Failed to allocate RX buffer of %d bytes" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Failed to allocate Wifi memory" msgstr "Failed to allocate WiFi memory" #: ports/esp32s2/common-hal/wifi/ScannedNetworks.c msgid "Failed to allocate wifi scan memory" msgstr "Failed to allocate WiFi scan memory" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "Failed to connect: internal error" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: timeout" msgstr "Failed to connect: timeout" #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Failed to init wifi" msgstr "Failed to init WiFi" #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "Failed to parse MP3 file" #: ports/nrf/sd_mutex.c #, c-format msgid "Failed to release mutex, err 0x%04x" msgstr "Failed to release mutex, err 0x%04x" #: supervisor/shared/safe_mode.c msgid "Failed to write internal flash." msgstr "Failed to write internal flash." #: py/moduerrno.c msgid "File exists" msgstr "File exists" #: ports/atmel-samd/common-hal/canio/Listener.c #: ports/esp32s2/common-hal/canio/Listener.c #: ports/stm/common-hal/canio/Listener.c msgid "Filters too complex" msgstr "Filters too complex" #: ports/esp32s2/common-hal/dualbank/__init__.c msgid "Firmware image is invalid" msgstr "Firmware image is invalid" #: ports/cxd56/common-hal/camera/Camera.c msgid "Format not supported" msgstr "Format not supported" #: shared-module/framebufferio/FramebufferDisplay.c #, c-format msgid "Framebuffer requires %d bytes" msgstr "Framebuffer requires %d bytes" #: shared-bindings/pwmio/PWMOut.c msgid "Frequency must match existing PWMOut using this timer" msgstr "Frequency must match existing PWMOut using this timer" #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" msgstr "Function requires lock" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Generic Failure" msgstr "Generic Failure" #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Group already used" msgstr "Group already used" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c #: ports/stm/common-hal/busio/SPI.c ports/stm/common-hal/canio/CAN.c #: ports/stm/common-hal/sdioio/SDCard.c msgid "Hardware busy, try alternative pins" msgstr "Hardware busy, try alternative pins" #: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Hardware in use, try alternative pins" msgstr "Hardware in use, try alternative pins" #: shared-bindings/wifi/Radio.c msgid "Hostname must be between 1 and 253 characters" msgstr "Hostname must be between 1 and 253 characters" #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "I/O operation on closed file" #: ports/stm/common-hal/busio/I2C.c msgid "I2C Init Error" msgstr "I2C init error" #: ports/raspberrypi/common-hal/busio/I2C.c msgid "I2C peripheral in use" msgstr "I2C peripheral in use" #: shared-bindings/audiobusio/I2SOut.c msgid "I2SOut not available" msgstr "I2SOut not available" #: ports/esp32s2/common-hal/alarm/pin/__init__.c msgid "IOs 0, 2 & 4 do not support internal pullup in sleep" msgstr "IOs 0, 2 & 4 do not support internal pullup in sleep" #: shared-bindings/aesio/aes.c #, c-format msgid "IV must be %d bytes long" msgstr "IV must be %d bytes long" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "In-buffer elements must be <= 4 bytes long" msgstr "In-buffer elements must be <= 4 bytes long" #: py/persistentcode.c msgid "" "Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/" "mpy-update for more info." msgstr "" "Incompatible .mpy file. Please update all .mpy files. See https://adafru.it/" "mpy-update for more info." #: shared-bindings/_pew/PewPew.c msgid "Incorrect buffer size" msgstr "Incorrect buffer size" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Init program size invalid" msgstr "Init program size invalid" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Initial set pin direction conflicts with initial out pin direction" msgstr "Initial set pin direction conflicts with initial out pin direction" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Initial set pin state conflicts with initial out pin state" msgstr "Initial set pin state conflicts with initial out pin state" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "Initialization failed due to lack of memory" msgstr "Initialisation failed due to lack of memory" #: shared-bindings/bitops/__init__.c #, c-format msgid "Input buffer length (%d) must be a multiple of the strand count (%d)" msgstr "Input buffer length (%d) must be a multiple of the strand count (%d)" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "Input taking too long" msgstr "Input taking too long" #: ports/esp32s2/common-hal/neopixel_write/__init__.c py/moduerrno.c msgid "Input/output error" msgstr "Input/output error" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d jumps on pin" msgstr "Instruction %d jumps on pin" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d shifts in more bits than pin count" msgstr "Instruction %d shifts in more bits than pin count" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d shifts out more bits than pin count" msgstr "Instruction %d shifts out more bits than pin count" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d uses extra pin" msgstr "Instruction %d uses extra pin" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Instruction %d waits on input outside of count" msgstr "Instruction %d waits on input outside of count" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Insufficient authentication" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient encryption" msgstr "Insufficient encryption" #: ports/stm/common-hal/busio/UART.c msgid "Internal define error" msgstr "Internal define error" #: shared-module/rgbmatrix/RGBMatrix.c #, c-format msgid "Internal error #%d" msgstr "Internal error #%d" #: shared-bindings/sdioio/SDCard.c msgid "Invalid %q" msgstr "Invalid %q" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Invalid %q pin" msgstr "Invalid %q pin" #: ports/stm/common-hal/busio/I2C.c ports/stm/common-hal/busio/SPI.c #: ports/stm/common-hal/busio/UART.c ports/stm/common-hal/canio/CAN.c #: ports/stm/common-hal/sdioio/SDCard.c msgid "Invalid %q pin selection" msgstr "Invalid %q pin selection" #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Invalid ADC Unit value" msgstr "Invalid ADC unit value" #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "Invalid BMP file" #: shared-bindings/wifi/Radio.c msgid "Invalid BSSID" msgstr "Invalid BSSID" #: ports/esp32s2/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "Invalid DAC pin supplied" #: ports/atmel-samd/common-hal/pwmio/PWMOut.c #: ports/cxd56/common-hal/pwmio/PWMOut.c #: ports/mimxrt10xx/common-hal/pwmio/PWMOut.c #: ports/nrf/common-hal/pwmio/PWMOut.c #: ports/raspberrypi/common-hal/pwmio/PWMOut.c shared-bindings/pwmio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Invalid PWM frequency" #: ports/esp32s2/common-hal/analogio/AnalogIn.c msgid "Invalid Pin" msgstr "Invalid pin" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c #: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid argument" msgstr "Invalid argument" #: shared-module/displayio/Bitmap.c msgid "Invalid bits per value" msgstr "Invalid bits per value" #: ports/nrf/common-hal/busio/UART.c ports/raspberrypi/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "Invalid buffer size" #: shared-bindings/_pixelbuf/PixelBuf.c msgid "Invalid byteorder string" msgstr "Invalid byteorder string" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/esp32s2/common-hal/frequencyio/FrequencyIn.c msgid "Invalid capture period. Valid range: 1 - 500" msgstr "Invalid capture period. Valid range: 1 - 500" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid channel count" msgstr "Invalid channel count" #: shared-bindings/digitalio/DigitalInOut.c msgid "Invalid direction." msgstr "Invalid direction." #: shared-module/audiocore/WaveFile.c msgid "Invalid file" msgstr "Invalid file" #: shared-module/audiocore/WaveFile.c msgid "Invalid format chunk size" msgstr "Invalid format chunk size" #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/pwmio/PWMOut.c msgid "Invalid frequency" msgstr "Invalid frequency" #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "Invalid memory access." #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid number of bits" msgstr "Invalid number of bits" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c #: shared-bindings/displayio/FourWire.c msgid "Invalid phase" msgstr "Invalid phase" #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c #: ports/esp32s2/common-hal/touchio/TouchIn.c shared-bindings/pwmio/PWMOut.c #: shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Invalid pin" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Invalid pin for left channel" msgstr "Invalid pin for left channel" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Invalid pin for right channel" msgstr "Invalid pin for right channel" #: ports/atmel-samd/common-hal/busio/I2C.c #: ports/atmel-samd/common-hal/busio/SPI.c #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/i2cperipheral/I2CPeripheral.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/cxd56/common-hal/sdioio/SDCard.c #: ports/esp32s2/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/SPI.c #: ports/esp32s2/common-hal/busio/UART.c ports/esp32s2/common-hal/canio/CAN.c #: ports/mimxrt10xx/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/nrf/common-hal/busio/I2C.c #: ports/raspberrypi/common-hal/busio/I2C.c #: ports/raspberrypi/common-hal/busio/SPI.c #: ports/raspberrypi/common-hal/busio/UART.c msgid "Invalid pins" msgstr "Invalid pins" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c #: shared-bindings/displayio/FourWire.c msgid "Invalid polarity" msgstr "Invalid polarity" #: shared-bindings/_bleio/Characteristic.c msgid "Invalid properties" msgstr "Invalid properties" #: shared-bindings/microcontroller/__init__.c msgid "Invalid run mode." msgstr "Invalid run mode." #: shared-module/_bleio/Attribute.c msgid "Invalid security_mode" msgstr "Invalid security_mode" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid size" msgstr "Invalid size" #: ports/esp32s2/common-hal/ssl/SSLContext.c msgid "Invalid socket for TLS" msgstr "Invalid socket for TLS" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Invalid state" msgstr "Invalid state" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Invalid voice" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice count" msgstr "Invalid voice count" #: shared-module/audiocore/WaveFile.c msgid "Invalid wave file" msgstr "Invalid wave file" #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid word/bit length" msgstr "Invalid word/bit length" #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Key must be 16, 24, or 32 bytes long" #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "LHS of keyword arg must be an id" #: shared-module/displayio/Group.c msgid "Layer already in a group." msgstr "Layer already in a group." #: shared-module/displayio/Group.c msgid "Layer must be a Group or TileGrid subclass." msgstr "Layer must be a Group or TileGrid subclass." #: py/objslice.c msgid "Length must be an int" msgstr "Length must be an int" #: py/objslice.c msgid "Length must be non-negative" msgstr "Length must be non-negative" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "MAC address was invalid" msgstr "MAC address was invalid" #: shared-module/bitbangio/SPI.c msgid "MISO pin init failed." msgstr "MISO pin init failed." #: shared-module/bitbangio/SPI.c msgid "MOSI pin init failed." msgstr "MOSI pin init failed." #: shared-module/displayio/Shape.c #, c-format msgid "Maximum x value when mirrored is %d" msgstr "Maximum x value when mirrored is %d" #: shared-bindings/canio/Message.c msgid "Messages limited to 8 bytes" msgstr "Messages limited to 8 bytes" #: supervisor/shared/safe_mode.c #, fuzzy msgid "MicroPython NLR jump failed. Likely memory corruption." msgstr "CircuitPython NLR jump failed. Likely memory corruption." #: supervisor/shared/safe_mode.c #, fuzzy msgid "MicroPython fatal error." msgstr "CircuitPython fatal error." #: shared-bindings/audiobusio/PDMIn.c msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "Microphone startup delay must be in range 0.0 to 1.0" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Missing MISO or MOSI Pin" msgstr "Missing MISO or MOSI pin" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_in_pin. Instruction %d reads pin(s)" msgstr "Missing first_in_pin. Instruction %d reads pin(s)" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_in_pin. Instruction %d shifts in from pin(s)" msgstr "Missing first_in_pin. Instruction %d shifts in from pin(s)" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_in_pin. Instruction %d waits based on pin" msgstr "Missing first_in_pin. Instruction %d waits based on pin" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_out_pin. Instruction %d shifts out to pin(s)" msgstr "Missing first_out_pin. Instruction %d shifts out to pin(s)" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_out_pin. Instruction %d writes pin(s)" msgstr "Missing first_out_pin. Instruction %d writes pin(s)" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c #, c-format msgid "Missing first_set_pin. Instruction %d sets pin(s)" msgstr "Missing first_set_pin. Instruction %d sets pin(s)" #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "Must be a %q subclass." #: ports/mimxrt10xx/common-hal/busio/SPI.c shared-bindings/busio/SPI.c msgid "Must provide MISO or MOSI pin" msgstr "Must provide MISO or MOSI pin" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Must use a multiple of 6 rgb pins, not %d" msgstr "Must use a multiple of 6 rgb pins, not %d" #: ports/esp32s2/common-hal/nvm/ByteArray.c msgid "NVS Error" msgstr "NVS Error" #: py/parse.c msgid "Name too long" msgstr "Name too long" #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "No CCCD for this Characteristic" msgstr "No CCCD for this Characteristic" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "No DAC on chip" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/raspberrypi/common-hal/audiobusio/I2SOut.c #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "No DMA channel found" msgstr "No DMA channel found" #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "No DMA pacing timer found" msgstr "No DMA pacing timer found" #: shared-module/adafruit_bus_device/I2CDevice.c #, c-format msgid "No I2C device at address: %x" msgstr "No I2C device at address: %x" #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "No MISO pin" #: ports/esp32s2/common-hal/busio/SPI.c ports/mimxrt10xx/common-hal/busio/SPI.c #: ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "No MOSI pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "No RX pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/raspberrypi/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "No TX pin" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "No available clocks" msgstr "No available clocks" #: shared-bindings/_bleio/PacketBuffer.c msgid "No connection: length cannot be determined" msgstr "No connection: length cannot be determined" #: shared-bindings/board/__init__.c msgid "No default %q bus" msgstr "No default %q bus" #: ports/atmel-samd/common-hal/touchio/TouchIn.c msgid "No free GCLKs" msgstr "No free GCLKs" #: shared-bindings/os/__init__.c msgid "No hardware random available" msgstr "No hardware random available" #: ports/atmel-samd/common-hal/ps2io/Ps2.c msgid "No hardware support on clk pin" msgstr "No hardware support on clk pin" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "No hardware support on pin" msgstr "No hardware support on pin" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "No in in program" msgstr "No in in program" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "No in or out in program" msgstr "No in or out in program" #: shared-bindings/aesio/aes.c msgid "No key was specified" msgstr "No key was specified" #: shared-bindings/time/__init__.c msgid "No long integer support" msgstr "No long integer support" #: shared-bindings/wifi/Radio.c msgid "No network with that ssid" msgstr "No network with that ssid" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "No out in program" msgstr "No out in program" #: ports/atmel-samd/common-hal/busio/I2C.c ports/esp32s2/common-hal/busio/I2C.c #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c #: ports/raspberrypi/common-hal/busio/I2C.c msgid "No pull up found on SDA or SCL; check your wiring" msgstr "No pull up found on SDA or SCL; check your wiring" #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "No pulldown on pin; 1Mohm recommended" #: py/moduerrno.c msgid "No space left on device" msgstr "No space left on device" #: py/moduerrno.c msgid "No such file/directory" msgstr "No such file/directory" #: shared-module/rgbmatrix/RGBMatrix.c msgid "No timer available" msgstr "No timer available" #: supervisor/shared/safe_mode.c msgid "Nordic system firmware failure assertion." msgstr "" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Nordic system firmware out of memory" msgstr "" #: shared-bindings/ipaddress/IPv4Address.c shared-bindings/ipaddress/__init__.c msgid "Not a valid IP string" msgstr "Not a valid IP string" #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" msgstr "Not connected" #: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c #: shared-bindings/audiopwmio/PWMAudioOut.c msgid "Not playing" msgstr "Not playing" #: main.c msgid "Not running saved code.\n" msgstr "Not running saved code.\n" #: shared-bindings/_bleio/__init__.c msgid "Not settable" msgstr "Not settable" #: shared-bindings/util.c msgid "" "Object has been deinitialized and can no longer be used. Create a new object." msgstr "" "Object has been deinitialised and can no longer be used. Create a new object." #: ports/nrf/common-hal/busio/UART.c msgid "Odd parity is not supported" msgstr "Odd parity is not supported" #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c #: ports/raspberrypi/common-hal/audiobusio/PDMIn.c msgid "Only 8 or 16 bit mono with " msgstr "Only 8 or 16 bit mono with " #: ports/esp32s2/common-hal/wifi/__init__.c msgid "Only IPv4 addresses supported" msgstr "Only IPv4 addresses supported" #: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Only IPv4 sockets supported" msgstr "Only IPv4 sockets supported" #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" "Only Windows format, uncompressed BMP supported: given header size is %d" msgstr "" "Only Windows format, uncompressed BMP supported: given header size is %d" #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" "Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: " "%d bpp given" msgstr "" "Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: " "%d bpp given" #: ports/esp32s2/common-hal/alarm/touch/TouchAlarm.c msgid "Only one TouchAlarm can be set in deep sleep." msgstr "Only one TouchAlarm can be set in deep sleep." #: ports/esp32s2/common-hal/alarm/time/TimeAlarm.c msgid "Only one alarm.time alarm can be set." msgstr "Only one alarm.time alarm can be set." #: shared-module/displayio/ColorConverter.c msgid "Only one color can be transparent at a time" msgstr "Only one colour can be transparent at a time" #: shared-bindings/ipaddress/__init__.c msgid "Only raw int supported for ip" msgstr "Only raw int supported for ip" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Operation or feature not supported" msgstr "Operation or feature not supported" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Operation timed out" msgstr "Operation timed out" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Out of memory" msgstr "Out of memory" #: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "Out of sockets" msgstr "Out of sockets" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Out-buffer elements must be <= 4 bytes long" msgstr "Out-buffer elements must be <= 4 bytes long" #: shared-bindings/bitops/__init__.c #, c-format msgid "Output buffer must be at least %d bytes" msgstr "Output buffer must be at least %d bytes" #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Oversample must be multiple of 8." #: shared-bindings/audiobusio/PDMIn.c msgid "PDMIn not available" msgstr "PDMIn not available" #: shared-bindings/pwmio/PWMOut.c msgid "" "PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)" msgstr "" "PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)" #: shared-bindings/pwmio/PWMOut.c msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" "PWM frequency not writable when variable_frequency is False on construction." #: ports/raspberrypi/common-hal/countio/Counter.c msgid "PWM slice already in use" msgstr "PWM slice already in use" #: ports/raspberrypi/common-hal/countio/Counter.c msgid "PWM slice channel A already in use" msgstr "PWM slice channel A already in use" #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus not yet supported" #: ports/esp32s2/common-hal/audiobusio/__init__.c msgid "Peripheral in use" msgstr "Peripheral in use" #: py/moduerrno.c msgid "Permission denied" msgstr "Permission denied" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Pin count must be at least 1" msgstr "Pin count must be at least 1" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Pin count too large" msgstr "Pin count too large" #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/esp32s2/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c #: ports/raspberrypi/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin does not have ADC capabilities" #: shared-bindings/adafruit_bus_device/SPIDevice.c #: shared-bindings/digitalio/DigitalInOut.c msgid "Pin is input only" msgstr "Pin is input only" #: ports/raspberrypi/common-hal/countio/Counter.c msgid "Pin must be on PWM Channel B" msgstr "Pin must be on PWM Channel B" #: ports/atmel-samd/common-hal/countio/Counter.c msgid "Pin must support hardware interrupts" msgstr "Pin must support hardware interrupts" #: ports/stm/common-hal/pulseio/PulseIn.c msgid "Pin number already reserved by EXTI" msgstr "Pin number already reserved by EXTI" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "" "Pinout uses %d bytes per element, which consumes more than the ideal %d " "bytes. If this cannot be avoided, pass allow_inefficient=True to the " "constructor" msgstr "" "Pinout uses %d bytes per element, which consumes more than the ideal %d " "bytes. If this cannot be avoided, pass allow_inefficient=True to the " "constructor" #: ports/raspberrypi/common-hal/rotaryio/IncrementalEncoder.c msgid "Pins must be sequential" msgstr "Pins must be sequential" #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "Pins must share PWM slice" msgstr "Pins must share PWM slice" #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "Plus any modules on the filesystem\n" #: shared-module/vectorio/Polygon.c msgid "Polygon needs at least 3 points" msgstr "Polygon needs at least 3 points" #: ports/esp32s2/common-hal/pulseio/PulseOut.c msgid "" "Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " "instead" msgstr "" "Port does not accept PWM carrier. Pass a pin, frequency and duty cycle " "instead" #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/pulseio/PulseOut.c #: ports/stm/common-hal/pulseio/PulseOut.c msgid "" "Port does not accept pins or frequency. Construct and pass a PWMOut Carrier " "instead" msgstr "" "Port does not accept pins or frequency. Construct and pass a PWMOut Carrier " "instead" #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Prefix buffer must be on the heap" #: main.c msgid "Press any key to enter the REPL. Use CTRL-D to reload.\n" msgstr "Press any key to enter the REPL. Use CTRL-D to reload.\n" #: main.c msgid "Pretending to deep sleep until alarm, CTRL-C or file write.\n" msgstr "Pretending to deep sleep until alarm, CTRL-C or file write.\n" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Program does IN without loading ISR" msgstr "Program does IN without loading ISR" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "Program does OUT without loading OSR" msgstr "Program does OUT without loading OSR" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Program must contain at least one 16-bit instruction." msgstr "Program must contain at least one 16-bit instruction." #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Program size invalid" msgstr "Program size invalid" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Program too large" msgstr "Program too large" #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull not used when direction is output." #: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "RAISE mode is not implemented" msgstr "RAISE mode is not implemented" #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG deinit Error" #: ports/stm/common-hal/os/__init__.c msgid "RNG Init Error" msgstr "RNG init Error" #: ports/nrf/common-hal/busio/UART.c ports/raspberrypi/common-hal/busio/UART.c msgid "RS485 Not yet supported on this device" msgstr "RS485 not yet supported on this device" #: ports/esp32s2/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "RS485 inversion specified when not in RS485 mode" #: ports/cxd56/common-hal/rtc/RTC.c ports/esp32s2/common-hal/rtc/RTC.c #: ports/mimxrt10xx/common-hal/rtc/RTC.c ports/nrf/common-hal/rtc/RTC.c #: ports/raspberrypi/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "RTC calibration is not supported on this board" #: shared-bindings/alarm/time/TimeAlarm.c shared-bindings/time/__init__.c msgid "RTC is not supported on this board" msgstr "RTC is not supported on this board" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485 not yet supported on this device" #: ports/stm/common-hal/os/__init__.c msgid "Random number generation error" msgstr "Random number generation error" #: shared-bindings/memorymonitor/AllocationSize.c #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "Read-only" #: extmod/vfs_fat.c py/moduerrno.c msgid "Read-only filesystem" msgstr "Read-only filesystem" #: shared-module/displayio/Bitmap.c msgid "Read-only object" msgstr "Read-only object" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Received response was invalid" msgstr "Received response was invalid" #: shared-bindings/displayio/EPaperDisplay.c msgid "Refresh too soon" msgstr "Refresh too soon" #: shared-bindings/canio/RemoteTransmissionRequest.c msgid "RemoteTransmissionRequests limited to 8 bytes" msgstr "RemoteTransmissionRequests limited to 8 bytes" #: shared-bindings/aesio/aes.c msgid "Requested AES mode is unsupported" msgstr "Requested AES mode is unsupported" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Requested resource not found" msgstr "Requested resource not found" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Right channel unsupported" msgstr "Right channel unsupported" #: shared-bindings/_pew/PewPew.c msgid "Row entry must be digitalio.DigitalInOut" msgstr "Row entry must be digitalio. DigitalInOut" #: main.c msgid "Running in safe mode! " msgstr "Running in safe mode! " #: shared-module/sdcardio/SDCard.c msgid "SD card CSD format not supported" msgstr "SD card CSD format not supported" #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO GetCardInfo Error %d" msgstr "SDIO GetCardInfo error %d" #: ports/stm/common-hal/sdioio/SDCard.c #, c-format msgid "SDIO Init Error %d" msgstr "SDIO init error %d" #: ports/stm/common-hal/busio/SPI.c msgid "SPI Init Error" msgstr "SPI init error" #: ports/stm/common-hal/busio/SPI.c msgid "SPI Re-initialization error" msgstr "SPI reinitialisation error" #: ports/raspberrypi/common-hal/busio/SPI.c msgid "SPI peripheral in use" msgstr "SPI peripheral in use" #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Sample rate must be positive" #: ports/atmel-samd/common-hal/audioio/AudioOut.c #, c-format msgid "Sample rate too high. It must be less than %d" msgstr "Sample rate too high. It must be less than %d" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Scan already in progess. Stop with stop_scan." msgstr "Scan already in progess. Stop with stop_scan." #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Serializer in use" msgstr "Serialiser in use" #: shared-bindings/ssl/SSLContext.c msgid "Server side context cannot have hostname" msgstr "Server side context cannot have hostname" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Set pin count must be between 1 and 5" msgstr "Set pin count must be between 1 and 5" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "Side set pin count must be between 1 and 5" msgstr "Side set pin count must be between 1 and 5" #: ports/cxd56/common-hal/camera/Camera.c msgid "Size not supported" msgstr "Size not supported" #: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice and value different lengths." #: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c #: shared-bindings/displayio/TileGrid.c #: shared-bindings/memorymonitor/AllocationSize.c #: shared-bindings/pulseio/PulseIn.c msgid "Slices not supported" msgstr "Slices not supported" #: ports/esp32s2/common-hal/socketpool/SocketPool.c msgid "SocketPool can only be used with wifi.radio" msgstr "SocketPool can only be used with wifi.radio" #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "Source and destination buffers must be the same length" #: extmod/modure.c msgid "Splitting with sub-captures" msgstr "Splitting with sub-captures" #: shared-bindings/supervisor/__init__.c msgid "Stack size must be at least 256" msgstr "Stack size must be at least 256" #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "Stereo left must be on PWM channel A" msgstr "Stereo left must be on PWM channel A" #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "Stereo right must be on PWM channel B" msgstr "Stereo right must be on PWM channel B" #: shared-bindings/multiterminal/__init__.c msgid "Stream missing readinto() or write() method." msgstr "Stream missing readinto() or write() method." #: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Supply at least one UART pin" msgstr "Supply at least one UART pin" #: shared-bindings/alarm/time/TimeAlarm.c msgid "Supply one of monotonic_time or epoch_time" msgstr "Supply one of monotonic_time or epoch_time" #: shared-bindings/gnss/GNSS.c msgid "System entry must be gnss.SatelliteSystem" msgstr "System entry must be gnss.SatelliteSystem" #: ports/stm/common-hal/microcontroller/Processor.c msgid "Temperature read timed out" msgstr "Temperature read timed out" #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" "Please increase the stack size if you know how, or if not:" msgstr "" "The CircuitPython heap was corrupted because the stack was too small.\n" "Please increase the stack size if you know how, or if not:" #: supervisor/shared/safe_mode.c msgid "" "The `microcontroller` module was used to boot into safe mode. Press reset to " "exit safe mode.\n" msgstr "" "The `microcontroller` module was used to boot into safe mode. Press reset to " "exit safe mode.\n" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "The length of rgb_pins must be 6, 12, 18, 24, or 30" msgstr "The length of rgb_pins must be 6, 12, 18, 24, or 30" #: supervisor/shared/safe_mode.c msgid "" "The microcontroller's power dipped. Make sure your power supply provides\n" "enough power for the whole circuit and press reset (after ejecting " "CIRCUITPY).\n" msgstr "" "The microcontroller's power dipped. Make sure your power supply provides\n" "enough power for the whole circuit and press reset (after ejecting " "CIRCUITPY).\n" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's bits_per_sample does not match the mixer's" msgstr "The sample's bits_per_sample does not match the mixer's" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's channel count does not match the mixer's" msgstr "The sample's channel count does not match the mixer's" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's sample rate does not match the mixer's" msgstr "The sample's sample rate does not match the mixer's" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's signedness does not match the mixer's" msgstr "The sample's signedness does not match the mixer's" #: shared-bindings/displayio/TileGrid.c msgid "Tile height must exactly divide bitmap height" msgstr "Tile height must exactly divide bitmap height" #: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c msgid "Tile index out of bounds" msgstr "Tile index out of bounds" #: shared-bindings/displayio/TileGrid.c msgid "Tile value out of bounds" msgstr "Tile value out of bounds" #: shared-bindings/displayio/TileGrid.c msgid "Tile width must exactly divide bitmap width" msgstr "Tile width must exactly divide bitmap width" #: shared-bindings/alarm/time/TimeAlarm.c msgid "Time is in the past." msgstr "Time is in the past." #: ports/nrf/common-hal/_bleio/Adapter.c #, c-format msgid "Timeout is too long: Maximum timeout length is %d seconds" msgstr "Timeout is too long: Maximum timeout length is %d seconds" #: supervisor/shared/safe_mode.c msgid "To exit, please reset the board without " msgstr "To exit, please reset the board without " #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/raspberrypi/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "Too many channels in sample." #: shared-module/displayio/__init__.c msgid "Too many display busses" msgstr "Too many display busses" #: shared-module/displayio/__init__.c msgid "Too many displays" msgstr "Too many displays" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Total data to write is larger than outgoing_packet_length" msgstr "Total data to write is larger than outgoing_packet_length" #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (most recent call last):\n" #: shared-bindings/time/__init__.c msgid "Tuple or struct_time argument required" msgstr "Tuple or struct_time argument required" #: ports/stm/common-hal/busio/UART.c msgid "UART Buffer allocation error" msgstr "UART buffer allocation error" #: ports/stm/common-hal/busio/UART.c msgid "UART De-init error" msgstr "UART deinit error" #: ports/stm/common-hal/busio/UART.c msgid "UART Init Error" msgstr "UART init Error" #: ports/stm/common-hal/busio/UART.c msgid "UART Re-init error" msgstr "UART reinit error" #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "UART write error" #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "USB busy" #: shared-module/usb_hid/Device.c msgid "USB Error" msgstr "USB error" #: shared-bindings/_bleio/UUID.c msgid "UUID integer value must be 0-0xffff" msgstr "UUID integer value must be 0-0xffff" #: shared-bindings/_bleio/UUID.c msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'" msgstr "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'" #: shared-bindings/_bleio/UUID.c msgid "UUID value is not str, int or byte buffer" msgstr "UUID value is not str, int or byte buffer" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/raspberrypi/common-hal/audiobusio/I2SOut.c #: ports/raspberrypi/common-hal/audiopwmio/PWMAudioOut.c msgid "Unable to allocate buffers for signed conversion" msgstr "Unable to allocate buffers for signed conversion" #: ports/esp32s2/common-hal/busio/I2C.c msgid "Unable to create lock" msgstr "Unable to create lock" #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" msgstr "Unable to find I2C display at %x" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Unable to find free GCLK" msgstr "Unable to find free GCLK" #: py/parse.c msgid "Unable to init parser" msgstr "Unable to init parser" #: shared-module/displayio/OnDiskBitmap.c msgid "Unable to read color palette data" msgstr "Unable to read colour palette data" #: shared-bindings/nvm/ByteArray.c msgid "Unable to write to nvm." msgstr "Unable to write to nvm." #: shared-bindings/alarm/SleepMemory.c msgid "Unable to write to sleep_memory." msgstr "Unable to write to sleep_memory." #: ports/nrf/common-hal/_bleio/UUID.c msgid "Unexpected nrfx uuid type" msgstr "Unexpected nrfx uuid type" #: ports/esp32s2/common-hal/ssl/SSLSocket.c #, c-format msgid "Unhandled ESP TLS error %d %d %x %d" msgstr "Unhandled ESP TLS error %d %d %x %d" #: shared-bindings/wifi/Radio.c #, c-format msgid "Unknown failure %d" msgstr "Unknown failure %d" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" msgstr "Unknown gatt error: 0x%04x" #: supervisor/shared/safe_mode.c msgid "Unknown reason." msgstr "Unknown reason." #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown security error: 0x%04x" msgstr "Unknown security error: 0x%04x" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown system firmware error: %04x" msgstr "" #: shared-bindings/_pixelbuf/PixelBuf.c #, c-format msgid "Unmatched number of items on RHS (expected %d, got %d)." msgstr "Unmatched number of items on RHS (expected %d, got %d)." #: ports/nrf/common-hal/_bleio/__init__.c msgid "" "Unspecified issue. Can be that the pairing prompt on the other device was " "declined or ignored." msgstr "" "Unspecified issue. Can be that the pairing prompt on the other device was " "declined or ignored." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c #: ports/esp32s2/common-hal/busio/UART.c #: ports/raspberrypi/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Unsupported baudrate" #: shared-module/displayio/display_core.c msgid "Unsupported display bus type" msgstr "Unsupported display bus type" #: shared-module/audiocore/WaveFile.c msgid "Unsupported format" msgstr "Unsupported format" #: ports/raspberrypi/common-hal/pulseio/PulseOut.c py/moduerrno.c msgid "Unsupported operation" msgstr "Unsupported operation" #: shared-bindings/digitalio/DigitalInOut.c msgid "Unsupported pull value." msgstr "Unsupported pull value." #: ports/esp32s2/common-hal/dualbank/__init__.c msgid "Update Failed" msgstr "Update failed" #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c msgid "Value length != required fixed length" msgstr "Value length != required fixed length" #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c msgid "Value length > max_length" msgstr "Value length > max_length" #: ports/esp32s2/bindings/espidf/__init__.c ports/esp32s2/esp_error.c msgid "Version was invalid" msgstr "Version was invalid" #: py/emitnative.c msgid "Viper functions don't currently support more than 4 arguments" msgstr "Viper functions don't currently support more than 4 arguments" #: ports/stm/common-hal/microcontroller/Processor.c msgid "Voltage read timed out" msgstr "Voltage read timed out" #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "WARNING: Your code filename has two extensions\n" #: ports/nrf/common-hal/watchdog/WatchDogTimer.c #: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "WatchDogTimer cannot be deinitialized once mode is set to RESET" msgstr "WatchDogTimer cannot be deinitialised once mode is set to RESET" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer is not currently running" msgstr "WatchDogTimer is not currently running" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET" msgstr "WatchDogTimer.mode cannot be changed once set to WatchDogMode.RESET" #: shared-bindings/watchdog/WatchDogTimer.c msgid "WatchDogTimer.timeout must be greater than 0" msgstr "WatchDogTimer.timeout must be greater than 0" #: supervisor/shared/safe_mode.c msgid "Watchdog timer expired." msgstr "WatchDog timer expired." #: py/builtinhelp.c #, c-format msgid "" "Welcome to Adafruit CircuitPython %s!\n" "\n" "Please visit learn.adafruit.com/category/circuitpython for project guides.\n" "\n" "To list built-in modules please do `help(\"modules\")`.\n" msgstr "" "Welcome to Adafruit CircuitPython %s!\n" "\n" "Please visit learn.adafruit.com/category/circuitpython for project guides.\n" "\n" "To list built-in modules please do `help(\"modules\")`.\n" #: shared-bindings/wifi/Radio.c msgid "WiFi password must be between 8 and 63 characters" msgstr "WiFi password must be between 8 and 63 characters" #: main.c msgid "Woken up by alarm.\n" msgstr "Woken up by alarm.\n" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "Writes not supported on Characteristic" #: supervisor/shared/safe_mode.c msgid "You are in safe mode: something unanticipated happened.\n" msgstr "You are in safe mode: something unanticipated happened.\n" #: supervisor/shared/safe_mode.c msgid "You requested starting safe mode by " msgstr "You requested starting safe mode by " #: py/objtype.c msgid "__init__() should return None" msgstr "__init__() should return None" #: py/objtype.c msgid "__init__() should return None, not '%q'" msgstr "__init__() should return None, not '%q'" #: py/objobject.c msgid "__new__ arg must be a user-type" msgstr "__new__ arg must be a user-type" #: extmod/modubinascii.c extmod/moduhashlib.c py/objarray.c msgid "a bytes-like object is required" msgstr "a bytes-like object is required" #: lib/embed/abort_.c msgid "abort() called" msgstr "abort() called" #: extmod/machine_mem.c #, c-format msgid "address %08x is not aligned to %d bytes" msgstr "address %08x is not aligned to %d bytes" #: shared-bindings/i2cperipheral/I2CPeripheral.c msgid "address out of bounds" msgstr "address out of bounds" #: shared-bindings/i2cperipheral/I2CPeripheral.c msgid "addresses is empty" msgstr "addresses is empty" #: py/modbuiltins.c msgid "arg is an empty sequence" msgstr "arg is an empty sequence" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "argsort argument must be an ndarray" msgstr "argsort argument must be an ndarray" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "argsort is not implemented for flattened arrays" msgstr "argsort is not implemented for flattened arrays" #: py/runtime.c msgid "argument has wrong type" msgstr "argument has wrong type" #: py/argcheck.c shared-bindings/_stage/__init__.c #: shared-bindings/digitalio/DigitalInOut.c shared-bindings/gamepad/GamePad.c msgid "argument num/types mismatch" msgstr "argument num/types mismatch" #: py/runtime.c msgid "argument should be a '%q' not a '%q'" msgstr "argument should be a '%q' not a '%q'" #: extmod/ulab/code/numpy/numerical/numerical.c #: extmod/ulab/code/numpy/transform/transform.c msgid "arguments must be ndarrays" msgstr "arguments must be ndarrays" #: extmod/ulab/code/ndarray.c msgid "array and index length must be equal" msgstr "array and index length must be equal" #: py/objarray.c shared-bindings/alarm/SleepMemory.c #: shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "array/bytes required on right side" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "attempt to get (arg)min/(arg)max of empty sequence" msgstr "attempt to get (arg)min/(arg)max of empty sequence" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "attempt to get argmin/argmax of an empty sequence" msgstr "attempt to get argmin/argmax of an empty sequence" #: py/objstr.c msgid "attributes not supported yet" msgstr "attributes not supported yet" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "axis is out of bounds" msgstr "axis is out of bounds" #: extmod/ulab/code/numpy/numerical/numerical.c extmod/ulab/code/ulab_tools.c msgid "axis must be None, or an integer" msgstr "axis must be None, or an integer" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "axis too long" msgstr "axis too long" #: py/builtinevex.c msgid "bad compile mode" msgstr "bad compile mode" #: py/objstr.c msgid "bad conversion specifier" msgstr "bad conversion specifier" #: py/objstr.c msgid "bad format string" msgstr "bad format string" #: py/binary.c py/objarray.c msgid "bad typecode" msgstr "bad typecode" #: py/emitnative.c msgid "binary op %q not implemented" msgstr "binary op %q not implemented" #: shared-bindings/busio/UART.c msgid "bits must be in range 5 to 9" msgstr "bits must be in range 5 to 9" #: shared-bindings/audiomixer/Mixer.c msgid "bits_per_sample must be 8 or 16" msgstr "bits_per_sample must be 8 or 16" #: py/emitinlinethumb.c msgid "branch not in range" msgstr "Branch not in range" #: extmod/ulab/code/ulab_create.c extmod/ulab/code/utils/utils.c msgid "buffer is smaller than requested size" msgstr "Buffer is smaller than requested size" #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "Buffer must be a bytes-like object" #: extmod/ulab/code/ulab_create.c extmod/ulab/code/utils/utils.c msgid "buffer size must be a multiple of element size" msgstr "Buffer size must be a multiple of element size" #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "Buffer size must match format" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "buffer slices must be of equal length" msgstr "Buffer slices must be of equal length" #: py/modstruct.c shared-bindings/struct/__init__.c #: shared-module/struct/__init__.c msgid "buffer too small" msgstr "Buffer too small" #: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "buffer too small for requested bytes" msgstr "Buffer too small for requested bytes" #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "Buttons must be digitalio.DigitalInOut" #: py/vm.c msgid "byte code not implemented" msgstr "Byte code not implemented" #: shared-bindings/_pixelbuf/PixelBuf.c msgid "byteorder is not a string" msgstr "Byteorder is not a string" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "Bytes > 8 bits not supported" #: py/objarray.c msgid "bytes length not a multiple of item size" msgstr "Bytes length not a multiple of item size" #: py/objstr.c msgid "bytes value out of range" msgstr "Bytes value out of range" #: ports/atmel-samd/bindings/samd/Clock.c ports/atmel-samd/common-hal/rtc/RTC.c msgid "calibration is out of range" msgstr "Calibration is out of range" #: ports/atmel-samd/bindings/samd/Clock.c msgid "calibration is read only" msgstr "Calibration is read only" #: ports/atmel-samd/common-hal/rtc/RTC.c msgid "calibration value out of range +/-127" msgstr "Calibration value out of range +/-127" #: py/emitinlinethumb.c msgid "can only have up to 4 parameters to Thumb assembly" msgstr "Can only have up to 4 parameters to thumb assembly" #: py/emitinlinextensa.c msgid "can only have up to 4 parameters to Xtensa assembly" msgstr "Can only have up to 4 parameters to xtensa assembly" #: py/persistentcode.c msgid "can only save bytecode" msgstr "Can only save bytecode" #: py/objtype.c msgid "can't add special method to already-subclassed class" msgstr "Can't add special method to already-subclassed class" #: py/compile.c msgid "can't assign to expression" msgstr "Can't assign to expression" #: py/obj.c py/objint.c shared-bindings/i2cperipheral/I2CPeripheral.c #: shared-module/_pixelbuf/PixelBuf.c msgid "can't convert %q to %q" msgstr "Can't convert %q to %q" #: py/objstr.c msgid "can't convert '%q' object to %q implicitly" msgstr "Can't convert '%q' object to %q implicitly" #: py/obj.c msgid "can't convert to %q" msgstr "Can't convert to %q" #: py/objstr.c msgid "can't convert to str implicitly" msgstr "Can't convert to str implicitly" #: py/compile.c msgid "can't declare nonlocal in outer code" msgstr "Can't declare nonlocal in outer code" #: py/compile.c msgid "can't delete expression" msgstr "Can't delete expression" #: py/emitnative.c msgid "can't do binary op between '%q' and '%q'" msgstr "Can't do binary op between '%q' and '%q'" #: py/objcomplex.c msgid "can't do truncated division of a complex number" msgstr "Can't do truncated division of a complex number" #: py/compile.c msgid "can't have multiple **x" msgstr "can't have multiple **x" #: py/compile.c msgid "can't have multiple *x" msgstr "can't have multiple *x" #: py/emitnative.c msgid "can't implicitly convert '%q' to 'bool'" msgstr "can't implicitly convert '%q' to 'bool'" #: py/emitnative.c msgid "can't load from '%q'" msgstr "can't load from '%q'" #: py/emitnative.c msgid "can't load with '%q' index" msgstr "can't load with '%q' index" #: py/objgenerator.c msgid "can't pend throw to just-started generator" msgstr "can't pend throw to just-started generator" #: py/objgenerator.c msgid "can't send non-None value to a just-started generator" msgstr "can't send non-None value to a just-started generator" #: shared-module/sdcardio/SDCard.c msgid "can't set 512 block size" msgstr "can't set 512 block size" #: py/objnamedtuple.c msgid "can't set attribute" msgstr "can't set attribute" #: py/emitnative.c msgid "can't store '%q'" msgstr "can't store '%q'" #: py/emitnative.c msgid "can't store to '%q'" msgstr "can't store to '%q'" #: py/emitnative.c msgid "can't store with '%q' index" msgstr "Can't store with '%q' index" #: py/objstr.c msgid "" "can't switch from automatic field numbering to manual field specification" msgstr "" "can't switch from automatic field numbering to manual field specification" #: py/objstr.c msgid "" "can't switch from manual field specification to automatic field numbering" msgstr "" "can't switch from manual field specification to automatic field numbering" #: extmod/ulab/code/ndarray_operators.c msgid "cannot cast output with casting rule" msgstr "can't cast output with casting rule" #: py/objtype.c msgid "cannot create '%q' instances" msgstr "can't create '%q' instances" #: py/objtype.c msgid "cannot create instance" msgstr "can't create instance" #: py/runtime.c msgid "cannot import name %q" msgstr "can't import name %q" #: py/builtinimport.c msgid "cannot perform relative import" msgstr "can't perform relative import" #: py/emitnative.c msgid "casting" msgstr "casting" #: shared-bindings/_stage/Text.c msgid "chars buffer too small" msgstr "chars buffer too small" #: py/modbuiltins.c msgid "chr() arg not in range(0x110000)" msgstr "chr() arg not in range(0x110000)" #: py/modbuiltins.c msgid "chr() arg not in range(256)" msgstr "chr() arg not in range(256)" #: shared-module/vectorio/Circle.c msgid "circle can only be registered in one parent" msgstr "circle can only be registered in one parent" #: shared-bindings/bitmaptools/__init__.c msgid "clip point must be (x,y) tuple" msgstr "clip point must be (x,y) tuple" #: shared-bindings/msgpack/ExtType.c msgid "code outside range 0~127" msgstr "code outside range 0~127" #: shared-bindings/displayio/Palette.c msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)" msgstr "colour buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)" #: shared-bindings/displayio/Palette.c msgid "color buffer must be a buffer, tuple, list, or int" msgstr "colour buffer must be a buffer, tuple, list, or int" #: shared-bindings/displayio/Palette.c msgid "color buffer must be a bytearray or array of type 'b' or 'B'" msgstr "colour buffer must be a bytearray or array of type 'b' or 'B'" #: shared-bindings/displayio/Palette.c msgid "color must be between 0x000000 and 0xffffff" msgstr "colour must be between 0x000000 and 0xffffff" #: shared-bindings/displayio/ColorConverter.c msgid "color should be an int" msgstr "colour should be an int" #: py/objcomplex.c msgid "complex division by zero" msgstr "complex division by zero" #: py/objfloat.c py/parsenum.c msgid "complex values not supported" msgstr "complex values not supported" #: extmod/moduzlib.c msgid "compression header" msgstr "compression header" #: py/parse.c msgid "constant must be an integer" msgstr "constant must be an integer" #: py/emitnative.c msgid "conversion to object" msgstr "conversion to object" #: extmod/ulab/code/numpy/filter/filter.c msgid "convolve arguments must be linear arrays" msgstr "convolve arguments must be linear arrays" #: extmod/ulab/code/numpy/filter/filter.c msgid "convolve arguments must be ndarrays" msgstr "convolve arguments must be ndarrays" #: extmod/ulab/code/numpy/filter/filter.c msgid "convolve arguments must not be empty" msgstr "convolve arguments must not be empty" #: extmod/ulab/code/numpy/poly/poly.c msgid "could not invert Vandermonde matrix" msgstr "could not invert Vandermonde matrix" #: shared-module/sdcardio/SDCard.c msgid "couldn't determine SD card version" msgstr "couldn't determine SD card version" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "cross is defined for 1D arrays of length 3" msgstr "cross is defined for 1D arrays of length 3" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "data must be iterable" msgstr "cata must be iterable" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "data must be of equal length" msgstr "cata must be of equal length" #: extmod/ulab/code/ndarray.c msgid "data type not understood" msgstr "cata type not understood" #: py/parsenum.c msgid "decimal numbers not supported" msgstr "cecimal numbers not supported" #: py/compile.c msgid "default 'except' must be last" msgstr "default 'except' must be last" #: shared-bindings/msgpack/__init__.c msgid "default is not a function" msgstr "default is not a function" #: shared-bindings/audiobusio/PDMIn.c msgid "" "destination buffer must be a bytearray or array of type 'B' for bit_depth = 8" msgstr "" "destination buffer must be a bytearray or array of type 'B' for bit_depth = 8" #: shared-bindings/audiobusio/PDMIn.c msgid "destination buffer must be an array of type 'H' for bit_depth = 16" msgstr "destination buffer must be an array of type 'H' for bit_depth = 16" #: shared-bindings/audiobusio/PDMIn.c msgid "destination_length must be an int >= 0" msgstr "destination_length must be an int >= 0" #: py/objdict.c msgid "dict update sequence has wrong length" msgstr "dict update sequence has wrong length" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "diff argument must be an ndarray" msgstr "diff argument must be an ndarray" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "differentiation order out of range" msgstr "differentiation order out of range" #: extmod/ulab/code/numpy/transform/transform.c msgid "dimensions do not match" msgstr "dimensions do not match" #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c #: shared-bindings/math/__init__.c msgid "division by zero" msgstr "division by zero" #: py/objdeque.c msgid "empty" msgstr "empty" #: extmod/moduheapq.c extmod/modutimeq.c msgid "empty heap" msgstr "empty heap" #: py/objstr.c msgid "empty separator" msgstr "empty separator" #: shared-bindings/random/__init__.c msgid "empty sequence" msgstr "empty sequence" #: py/objstr.c msgid "end of format while looking for conversion specifier" msgstr "end of format while looking for conversion specifier" #: shared-bindings/displayio/Shape.c msgid "end_x should be an int" msgstr "end_x should be an int" #: shared-bindings/alarm/time/TimeAlarm.c msgid "epoch_time not supported on this board" msgstr "epoch_time not supported on this board" #: ports/nrf/common-hal/busio/UART.c #, c-format msgid "error = 0x%08lX" msgstr "error = 0x%08lX" #: py/runtime.c msgid "exceptions must derive from BaseException" msgstr "exceptions must derive from BaseException" #: shared-bindings/canio/CAN.c msgid "expected '%q' but got '%q'" msgstr "expected '%q' but got '%q'" #: shared-bindings/canio/CAN.c msgid "expected '%q' or '%q' but got '%q'" msgstr "expected '%q' or '%q' but got '%q'" #: py/objstr.c msgid "expected ':' after format specifier" msgstr "expected ':' after format specifier" #: py/obj.c msgid "expected tuple/list" msgstr "expected tuple/list" #: py/modthread.c msgid "expecting a dict for keyword args" msgstr "expecting a dict for keyword args" #: py/compile.c msgid "expecting an assembler instruction" msgstr "expecting an assembler instruction" #: py/compile.c msgid "expecting just a value for set" msgstr "expecting just a value for set" #: py/compile.c msgid "expecting key:value for dict" msgstr "expecting key:value for dict" #: shared-bindings/msgpack/__init__.c msgid "ext_hook is not a function" msgstr "ext_hook is not a function" #: py/argcheck.c msgid "extra keyword arguments given" msgstr "extra keyword arguments given" #: py/argcheck.c msgid "extra positional arguments given" msgstr "extra positional arguments given" #: py/parse.c msgid "f-string expression part cannot include a '#'" msgstr "f-string expression part cannot include a '#'" #: py/parse.c msgid "f-string expression part cannot include a backslash" msgstr "f-string expression part cannot include a backslash" #: py/parse.c msgid "f-string: empty expression not allowed" msgstr "f-string: empty expression not allowed" #: py/parse.c msgid "f-string: expecting '}'" msgstr "f-string: expecting '}'" #: py/parse.c msgid "f-string: single '}' is not allowed" msgstr "f-string: single '}' is not allowed" #: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c #: shared-bindings/displayio/OnDiskBitmap.c msgid "file must be a file opened in byte mode" msgstr "file must be a file opened in byte mode" #: shared-bindings/storage/__init__.c msgid "filesystem must provide mount method" msgstr "filesystem must provide mount method" #: extmod/ulab/code/numpy/vector/vector.c msgid "first argument must be a callable" msgstr "first argument must be a callable" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "first argument must be a function" msgstr "first argument must be a function" #: extmod/ulab/code/ulab_create.c msgid "first argument must be a tuple of ndarrays" msgstr "first argument must be a tuple of ndarrays" #: extmod/ulab/code/numpy/vector/vector.c msgid "first argument must be an ndarray" msgstr "first argument must be an ndarray" #: py/objtype.c msgid "first argument to super() must be type" msgstr "first argument to super() must be type" #: extmod/ulab/code/ndarray.c msgid "flattening order must be either 'C', or 'F'" msgstr "flattening order must be either 'C', or 'F'" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "flip argument must be an ndarray" msgstr "flip argument must be an ndarray" #: py/objint.c msgid "float too big" msgstr "float too big" #: shared-bindings/_stage/Text.c msgid "font must be 2048 bytes long" msgstr "font must be 2048 bytes long" #: py/objstr.c msgid "format requires a dict" msgstr "format requires a dict" #: py/objdeque.c msgid "full" msgstr "full" #: py/argcheck.c msgid "function does not take keyword arguments" msgstr "function does not take keyword arguments" #: py/argcheck.c #, c-format msgid "function expected at most %d arguments, got %d" msgstr "function expected at most %d arguments, got %d" #: py/bc.c py/objnamedtuple.c msgid "function got multiple values for argument '%q'" msgstr "function got multiple values for argument '%q'" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "function has the same sign at the ends of interval" msgstr "function has the same sign at the ends of interval" #: extmod/ulab/code/ndarray.c msgid "function is defined for ndarrays only" msgstr "function is defined for ndarrays only" #: py/argcheck.c #, c-format msgid "function missing %d required positional arguments" msgstr "function missing %d required positional arguments" #: py/bc.c msgid "function missing keyword-only argument" msgstr "function missing keyword-only argument" #: py/bc.c msgid "function missing required keyword argument '%q'" msgstr "function missing required keyword argument '%q'" #: py/bc.c #, c-format msgid "function missing required positional argument #%d" msgstr "function missing required positional argument #%d" #: py/argcheck.c py/bc.c py/objnamedtuple.c shared-bindings/time/__init__.c #, c-format msgid "function takes %d positional arguments but %d were given" msgstr "function takes %d positional arguments but %d were given" #: shared-bindings/time/__init__.c msgid "function takes exactly 9 arguments" msgstr "function takes exactly 9 arguments" #: py/objgenerator.c msgid "generator already executing" msgstr "generator already executing" #: py/objgenerator.c msgid "generator ignored GeneratorExit" msgstr "generator ignored GeneratorExit" #: shared-bindings/_stage/Layer.c msgid "graphic must be 2048 bytes long" msgstr "graphic must be 2048 bytes long" #: extmod/moduheapq.c msgid "heap must be a list" msgstr "heap must be a list" #: py/compile.c msgid "identifier redefined as global" msgstr "identifier redefined as global" #: py/compile.c msgid "identifier redefined as nonlocal" msgstr "identifier redefined as nonlocal" #: py/objstr.c msgid "incomplete format" msgstr "incomplete format" #: py/objstr.c msgid "incomplete format key" msgstr "incomplete format key" #: extmod/modubinascii.c msgid "incorrect padding" msgstr "incorrect padding" #: extmod/ulab/code/ndarray.c msgid "index is out of bounds" msgstr "index is out of bounds" #: extmod/ulab/code/numpy/numerical/numerical.c extmod/ulab/code/ulab_tools.c #: ports/esp32s2/common-hal/pulseio/PulseIn.c py/obj.c #: shared-bindings/bitmaptools/__init__.c msgid "index out of range" msgstr "index out of range" #: py/obj.c msgid "indices must be integers" msgstr "indices must be integers" #: extmod/ulab/code/ndarray.c msgid "indices must be integers, slices, or Boolean lists" msgstr "indices must be integers, slices, or Boolean lists" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "initial values must be iterable" msgstr "initial values must be iterable" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c msgid "initial_value length is wrong" msgstr "initial_value length is wrong" #: py/compile.c msgid "inline assembler must be a function" msgstr "inline assembler must be a function" #: extmod/ulab/code/ndarray.c msgid "input and output shapes are not compatible" msgstr "input and output shapes are not compatible" #: extmod/ulab/code/ulab_create.c msgid "input argument must be an integer, a tuple, or a list" msgstr "input argument must be an integer, a tuple, or a list" #: extmod/ulab/code/numpy/fft/fft_tools.c msgid "input array length must be power of 2" msgstr "input array length must be power of 2" #: extmod/ulab/code/ulab_create.c msgid "input arrays are not compatible" msgstr "input arrays are not compatible" #: extmod/ulab/code/numpy/poly/poly.c msgid "input data must be an iterable" msgstr "input data must be an iterable" #: extmod/ulab/code/numpy/linalg/linalg.c msgid "input matrix is asymmetric" msgstr "input matrix is asymmetric" #: extmod/ulab/code/numpy/linalg/linalg.c msgid "input matrix is singular" msgstr "input matrix is singular" #: extmod/ulab/code/user/user.c msgid "input must be a dense ndarray" msgstr "input must be a dense ndarray" #: extmod/ulab/code/ulab_create.c msgid "input must be a tensor of rank 2" msgstr "input must be a tensor of rank 2" #: extmod/ulab/code/ulab_create.c extmod/ulab/code/user/user.c msgid "input must be an ndarray" msgstr "input must be an ndarray" #: extmod/ulab/code/scipy/signal/signal.c msgid "input must be one-dimensional" msgstr "input must be one-dimensional" #: extmod/ulab/code/ulab_tools.c msgid "input must be square matrix" msgstr "input must be square matrix" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "input must be tuple, list, range, or ndarray" msgstr "input must be tuple, list, range, or ndarray" #: extmod/ulab/code/numpy/poly/poly.c msgid "input vectors must be of equal length" msgstr "input vectors must be of equal length" #: extmod/ulab/code/numpy/poly/poly.c msgid "inputs are not iterable" msgstr "inputs are not iterable" #: py/parsenum.c msgid "int() arg 2 must be >= 2 and <= 36" msgstr "int() arg 2 must be >= 2 and <= 36" #: py/objstr.c msgid "integer required" msgstr "integer required" #: extmod/ulab/code/numpy/approx/approx.c msgid "interp is defined for 1D arrays of equal length" msgstr "interp is defined for 1D arrays of equal length" #: shared-bindings/_bleio/Adapter.c #, c-format msgid "interval must be in range %s-%s" msgstr "interval must be in range %s-%s" #: lib/netutils/netutils.c msgid "invalid arguments" msgstr "invalid arguments" #: shared-bindings/bitmaptools/__init__.c #, c-format msgid "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" msgstr "invalid bits_per_pixel %d, must be, 1, 4, 8, 16, 24, or 32" #: extmod/modussl_axtls.c msgid "invalid cert" msgstr "invalid cert" #: extmod/uos_dupterm.c msgid "invalid dupterm index" msgstr "invalid dupterm index" #: shared-bindings/bitmaptools/__init__.c #, c-format msgid "invalid element size %d for bits_per_pixel %d\n" msgstr "invalid element size %d for bits_per_pixel %d\n" #: shared-bindings/bitmaptools/__init__.c #, c-format msgid "invalid element_size %d, must be, 1, 2, or 4" msgstr "invalid element_size %d, must be, 1, 2, or 4" #: extmod/modframebuf.c msgid "invalid format" msgstr "invalid format" #: py/objstr.c msgid "invalid format specifier" msgstr "invalid format specifier" #: shared-bindings/wifi/Radio.c msgid "invalid hostname" msgstr "invalid hostname" #: extmod/modussl_axtls.c msgid "invalid key" msgstr "invalid key" #: py/compile.c #, fuzzy msgid "invalid micropython decorator" msgstr "invalid CircuitPython decorator" #: shared-bindings/random/__init__.c msgid "invalid step" msgstr "invalid step" #: py/compile.c py/parse.c msgid "invalid syntax" msgstr "invalid syntax" #: py/parsenum.c msgid "invalid syntax for integer" msgstr "invalid syntax for integer" #: py/parsenum.c #, c-format msgid "invalid syntax for integer with base %d" msgstr "invalid syntax for integer with base %d" #: py/parsenum.c msgid "invalid syntax for number" msgstr "invalid syntax for number" #: ports/esp32s2/common-hal/alarm/pin/__init__.c msgid "io must be rtc io" msgstr "io must be rtc io" #: py/objtype.c msgid "issubclass() arg 1 must be a class" msgstr "issubclass() arg 1 must be a class" #: py/objtype.c msgid "issubclass() arg 2 must be a class or a tuple of classes" msgstr "issubclass() arg 2 must be a class or a tuple of classes" #: extmod/ulab/code/numpy/linalg/linalg.c msgid "iterations did not converge" msgstr "iterations did not converge" #: py/objstr.c msgid "join expects a list of str/bytes objects consistent with self object" msgstr "join expects a list of str/bytes objects consistent with self object" #: py/argcheck.c msgid "keyword argument(s) not yet implemented - use normal args instead" msgstr "keyword argument(s) not yet implemented - use normal args instead" #: py/bc.c msgid "keywords must be strings" msgstr "keywords must be strings" #: py/emitinlinethumb.c py/emitinlinextensa.c msgid "label '%q' not defined" msgstr "label '%q' not defined" #: py/compile.c msgid "label redefined" msgstr "label redefined" #: py/stream.c msgid "length argument not allowed for this type" msgstr "length argument not allowed for this type" #: shared-bindings/audiomixer/MixerVoice.c msgid "level must be between 0 and 1" msgstr "level must be between 0 and 1" #: py/objarray.c msgid "lhs and rhs should be compatible" msgstr "lhs and rhs should be compatible" #: py/emitnative.c msgid "local '%q' has type '%q' but source is '%q'" msgstr "local '%q' has type '%q' but source is '%q'" #: py/emitnative.c msgid "local '%q' used before type known" msgstr "local '%q' used before type known" #: py/vm.c msgid "local variable referenced before assignment" msgstr "local variable referenced before assignment" #: py/objint.c msgid "long int not supported in this build" msgstr "long int not supported in this build" #: ports/esp32s2/common-hal/canio/CAN.c msgid "loopback + silent mode not supported by peripheral" msgstr "loopback + silent mode not supported by peripheral" #: py/parse.c msgid "malformed f-string" msgstr "malformed f-string" #: shared-bindings/_stage/Layer.c msgid "map buffer too small" msgstr "map buffer too small" #: py/modmath.c shared-bindings/math/__init__.c msgid "math domain error" msgstr "math domain error" #: extmod/ulab/code/numpy/linalg/linalg.c msgid "matrix is not positive definite" msgstr "matrix is not positive definite" #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c #, c-format msgid "max_length must be 0-%d when fixed_length is %s" msgstr "max_length must be 0-%d when fixed_length is %s" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c msgid "max_length must be >= 0" msgstr "max_length must be >= 0" #: extmod/ulab/code/ndarray.c msgid "maximum number of dimensions is 4" msgstr "maximum number of dimensions is 4" #: py/runtime.c msgid "maximum recursion depth exceeded" msgstr "maximum recursion depth exceeded" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "maxiter must be > 0" msgstr "maxiter must be > 0" #: extmod/ulab/code/scipy/optimize/optimize.c msgid "maxiter should be > 0" msgstr "maxiter should be > 0" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "median argument must be an ndarray" msgstr "median argument must be an ndarray" #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" msgstr "memory allocation failed, allocating %u bytes" #: py/runtime.c msgid "memory allocation failed, heap is locked" msgstr "memory allocation failed, heap is locked" #: py/objarray.c msgid "memoryview: length is not a multiple of itemsize" msgstr "memoryview: length is not a multiple of itemsize" #: py/builtinimport.c msgid "module not found" msgstr "module not found" #: extmod/ulab/code/numpy/poly/poly.c msgid "more degrees of freedom than data points" msgstr "more degrees of freedom than data points" #: py/compile.c msgid "multiple *x in assignment" msgstr "multiple *x in assignment" #: py/objtype.c msgid "multiple bases have instance lay-out conflict" msgstr "multiple bases have instance lay-out conflict" #: py/objtype.c msgid "multiple inheritance not supported" msgstr "multiple inheritance not supported" #: py/emitnative.c msgid "must raise an object" msgstr "must raise an object" #: py/modbuiltins.c msgid "must use keyword argument for key function" msgstr "must use keyword argument for key function" #: py/runtime.c msgid "name '%q' is not defined" msgstr "name '%q' is not defined" #: py/runtime.c msgid "name not defined" msgstr "name not defined" #: py/compile.c msgid "name reused for argument" msgstr "name reused for argument" #: py/emitnative.c msgid "native yield" msgstr "native yield" #: py/runtime.c #, c-format msgid "need more than %d values to unpack" msgstr "need more than %d values to unpack" #: py/objint_longlong.c py/objint_mpz.c py/runtime.c msgid "negative power with no float support" msgstr "negative power with no float support" #: py/objint_mpz.c py/runtime.c msgid "negative shift count" msgstr "negative shift count" #: shared-module/sdcardio/SDCard.c msgid "no SD card" msgstr "no SD card" #: py/vm.c msgid "no active exception to reraise" msgstr "no active exception to reraise" #: shared-bindings/socket/__init__.c shared-module/network/__init__.c msgid "no available NIC" msgstr "no available NIC" #: py/compile.c msgid "no binding for nonlocal found" msgstr "no binding for nonlocal found" #: shared-module/msgpack/__init__.c msgid "no default packer" msgstr "no default packer" #: py/builtinimport.c msgid "no module named '%q'" msgstr "no module named '%q'" #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c #: shared-bindings/displayio/ParallelBus.c msgid "no reset pin available" msgstr "no reset pin available" #: shared-module/sdcardio/SDCard.c msgid "no response from SD card" msgstr "no response from SD card" #: py/runtime.c msgid "no such attribute" msgstr "no such attribute" #: ports/nrf/common-hal/_bleio/Connection.c msgid "non-UUID found in service_uuids_whitelist" msgstr "non-UUID found in service_uuids_whitelist" #: py/compile.c msgid "non-default argument follows default argument" msgstr "non-default argument follows default argument" #: extmod/modubinascii.c msgid "non-hex digit found" msgstr "non-hex digit found" #: py/compile.c msgid "non-keyword arg after */**" msgstr "non-keyword arg after */**" #: py/compile.c msgid "non-keyword arg after keyword arg" msgstr "non-keyword arg after keyword arg" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "non-zero timeout must be > 0.01" msgstr "non-zero timeout must be > 0.01" #: shared-bindings/_bleio/Adapter.c msgid "non-zero timeout must be >= interval" msgstr "non-zero timeout must be >= interval" #: shared-bindings/_bleio/UUID.c msgid "not a 128-bit UUID" msgstr "not a 128-bit UUID" #: py/objstr.c msgid "not all arguments converted during string formatting" msgstr "not all arguments converted during string formatting" #: py/objstr.c msgid "not enough arguments for format string" msgstr "not enough arguments for format string" #: extmod/ulab/code/ulab_create.c msgid "number of points must be at least 2" msgstr "number of points must be at least 2" #: py/builtinhelp.c msgid "object " msgstr "object " #: py/obj.c msgid "object '%q' is not a tuple or list" msgstr "object '%q' is not a tuple or list" #: py/obj.c msgid "object does not support item assignment" msgstr "object does not support item assignment" #: py/obj.c msgid "object does not support item deletion" msgstr "object does not support item deletion" #: py/obj.c msgid "object has no len" msgstr "object has no len" #: py/obj.c msgid "object is not subscriptable" msgstr "object is not subscriptable" #: py/runtime.c msgid "object not an iterator" msgstr "object not an iterator" #: py/objtype.c py/runtime.c msgid "object not callable" msgstr "object not callable" #: py/sequence.c shared-bindings/displayio/Group.c msgid "object not in sequence" msgstr "object not in sequence" #: py/runtime.c msgid "object not iterable" msgstr "object not iterable" #: py/obj.c msgid "object of type '%q' has no len()" msgstr "object of type '%q' has no len()" #: py/obj.c msgid "object with buffer protocol required" msgstr "object with buffer protocol required" #: extmod/modubinascii.c msgid "odd-length string" msgstr "odd-length string" #: extmod/ulab/code/ulab_create.c extmod/ulab/code/utils/utils.c msgid "offset is too large" msgstr "offset is too large" #: shared-bindings/dualbank/__init__.c msgid "offset must be >= 0" msgstr "offset must be >= 0" #: extmod/ulab/code/ulab_create.c msgid "offset must be non-negative and no greater than buffer length" msgstr "offset must be non-negative and not greater than buffer length" #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "offset out of bounds" #: ports/nrf/common-hal/audiobusio/PDMIn.c msgid "only bit_depth=16 is supported" msgstr "only bit_depth=16 is supported" #: ports/nrf/common-hal/audiobusio/PDMIn.c msgid "only sample_rate=16000 is supported" msgstr "only sample_rate=16000 is supported" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c #: shared-bindings/alarm/SleepMemory.c shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "only slices with step=1 (aka None) are supported" #: extmod/ulab/code/ndarray.c extmod/ulab/code/numpy/compare/compare.c #: extmod/ulab/code/numpy/vector/vector.c msgid "operands could not be broadcast together" msgstr "operands could not be broadcast together" #: extmod/ulab/code/ndarray.c msgid "operation is implemented for 1D Boolean arrays only" msgstr "operation is implemented for 1D Boolean arrays only" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "operation is not implemented on ndarrays" msgstr "operation is not implemented on ndarrays" #: extmod/ulab/code/ndarray.c msgid "operation is not supported for given type" msgstr "operation is not supported for given type" #: py/modbuiltins.c msgid "ord expects a character" msgstr "ord expects a character" #: py/modbuiltins.c #, c-format msgid "ord() expected a character, but string of length %d found" msgstr "ord() expected a character, but string of length %d found" #: extmod/ulab/code/utils/utils.c msgid "out array is too small" msgstr "" #: extmod/ulab/code/utils/utils.c msgid "out must be a float dense array" msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "out of range of source" msgstr "out of range of source" #: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c msgid "out of range of target" msgstr "out of range of target" #: py/objint_mpz.c msgid "overflow converting long int to machine word" msgstr "overflow converting long int to machine word" #: py/modstruct.c #, c-format msgid "pack expected %d items for packing (got %d)" msgstr "pack expected %d items for packing (got %d)" #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "palette must be 32 bytes long" #: shared-bindings/displayio/Palette.c msgid "palette_index should be an int" msgstr "palette_index should be an int" #: py/compile.c msgid "parameter annotation must be an identifier" msgstr "parameter annotation must be an identifier" #: py/emitinlinextensa.c msgid "parameters must be registers in sequence a2 to a5" msgstr "parameters must be registers in sequence a2 to a5" #: py/emitinlinethumb.c msgid "parameters must be registers in sequence r0 to r3" msgstr "parameters must be registers in sequence r0 to r3" #: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c msgid "pixel coordinates out of bounds" msgstr "pixel coordinates out of bounds" #: shared-bindings/displayio/Bitmap.c msgid "pixel value requires too many bits" msgstr "pixel value requires too many bits" #: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter" msgstr "pixel_shader must be displayio.Palette or displayio.ColorConverter" #: shared-module/vectorio/Polygon.c msgid "polygon can only be registered in one parent" msgstr "polygon can only be registered in one parent" #: ports/esp32s2/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "pop from an empty PulseIn" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/raspberrypi/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c py/objdict.c py/objlist.c py/objset.c #: shared-bindings/ps2io/Ps2.c msgid "pop from empty %q" msgstr "pop from empty %q" #: shared-bindings/socketpool/Socket.c shared-bindings/ssl/SSLSocket.c msgid "port must be >= 0" msgstr "port must be >= 0" #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "pow() 3rd argument cannot be 0" #: py/objint_mpz.c msgid "pow() with 3 arguments requires integers" msgstr "pow() with 3 arguments requires integers" #: ports/esp32s2/boards/adafruit_feather_esp32s2_nopsram/mpconfigboard.h #: ports/esp32s2/boards/adafruit_feather_esp32s2_tftback_nopsram/mpconfigboard.h #: ports/esp32s2/boards/adafruit_funhouse/mpconfigboard.h #: ports/esp32s2/boards/adafruit_magtag_2.9_grayscale/mpconfigboard.h #: ports/esp32s2/boards/adafruit_metro_esp32s2/mpconfigboard.h #: ports/esp32s2/boards/electroniccats_bastwifi/mpconfigboard.h #: ports/esp32s2/boards/espressif_kaluga_1/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wroom/mpconfigboard.h #: ports/esp32s2/boards/espressif_saola_1_wrover/mpconfigboard.h #: ports/esp32s2/boards/franzininho_wifi_wroom/mpconfigboard.h #: ports/esp32s2/boards/franzininho_wifi_wrover/mpconfigboard.h #: ports/esp32s2/boards/lilygo_ttgo_t8_s2_st7789/mpconfigboard.h #: ports/esp32s2/boards/microdev_micro_s2/mpconfigboard.h #: ports/esp32s2/boards/muselab_nanoesp32_s2/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wroom/mpconfigboard.h #: ports/esp32s2/boards/targett_module_clip_wrover/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_feathers2_prerelease/mpconfigboard.h #: ports/esp32s2/boards/unexpectedmaker_tinys2/mpconfigboard.h msgid "pressing boot button at start up.\n" msgstr "pressing boot button at start up.\n" #: ports/atmel-samd/boards/circuitplayground_express/mpconfigboard.h #: ports/atmel-samd/boards/circuitplayground_express_crickit/mpconfigboard.h #: ports/atmel-samd/boards/circuitplayground_express_displayio/mpconfigboard.h #: ports/atmel-samd/boards/escornabot_makech/mpconfigboard.h #: ports/atmel-samd/boards/meowmeow/mpconfigboard.h msgid "pressing both buttons at start up.\n" msgstr "pressing both buttons at start up.\n" #: ports/raspberrypi/common-hal/rp2pio/StateMachine.c msgid "pull masks conflict with direction masks" msgstr "pull masks conflict with direction masks" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "pull_threshold must be between 1 and 32" msgstr "pull_threshold must be between 1 and 32" #: ports/raspberrypi/bindings/rp2pio/StateMachine.c msgid "push_threshold must be between 1 and 32" msgstr "push_threshold must be between 1 and 32" #: extmod/modutimeq.c msgid "queue overflow" msgstr "queue overflow" #: py/parse.c msgid "raw f-strings are not implemented" msgstr "raw f-strings are not implemented" #: extmod/ulab/code/numpy/fft/fft_tools.c msgid "real and imaginary parts must be of equal length" msgstr "real and imaginary parts must be of equal length" #: py/builtinimport.c msgid "relative import" msgstr "relative import" #: py/obj.c #, c-format msgid "requested length %d but object has length %d" msgstr "requested length %d but object has length %d" #: extmod/ulab/code/ndarray_operators.c msgid "results cannot be cast to specified type" msgstr "results cannot be cast to specified type" #: py/compile.c msgid "return annotation must be an identifier" msgstr "return annotation must be an identifier" #: py/emitnative.c msgid "return expected '%q' but got '%q'" msgstr "return expected '%q' but got '%q'" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "rgb_pins[%d] duplicates another pin assignment" msgstr "rgb_pins[%d] duplicates another pin assignment" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "rgb_pins[%d] is not on the same port as clock" msgstr "rgb_pins[%d] is not on the same port as clock" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "roll argument must be an ndarray" msgstr "roll argument must be an ndarray" #: py/objstr.c msgid "rsplit(None,n)" msgstr "rsplit(None,n)" #: shared-bindings/audiocore/RawSample.c msgid "" "sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or " "'B'" msgstr "" "sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or " "'B'" #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c #: ports/raspberrypi/common-hal/audiobusio/PDMIn.c msgid "sampling rate out of range" msgstr "sampling rate out of range" #: py/modmicropython.c msgid "schedule stack full" msgstr "schedule stack full" #: lib/utils/pyexec.c py/builtinimport.c msgid "script compilation not supported" msgstr "script compilation not supported" #: extmod/ulab/code/ndarray.c msgid "shape must be a tuple" msgstr "shape must be a tuple" #: shared-module/msgpack/__init__.c msgid "short read" msgstr "short read" #: py/objstr.c msgid "sign not allowed in string format specifier" msgstr "sign not allowed in string format specifier" #: py/objstr.c msgid "sign not allowed with integer format specifier 'c'" msgstr "sign not allowed with integer format specifier 'c'" #: py/objstr.c msgid "single '}' encountered in format string" msgstr "single '}' encountered in format string" #: extmod/ulab/code/ulab_tools.c msgid "size is defined for ndarrays only" msgstr "size is defined for ndarrays only" #: shared-bindings/time/__init__.c msgid "sleep length must be non-negative" msgstr "sleep length must be non-negative" #: extmod/ulab/code/ndarray.c msgid "slice step can't be zero" msgstr "slice step can't be zero" #: py/objslice.c py/sequence.c msgid "slice step cannot be zero" msgstr "slice step cannot be zero" #: py/objint.c py/sequence.c msgid "small int overflow" msgstr "small int overflow" #: main.c msgid "soft reboot\n" msgstr "soft reboot\n" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "sort argument must be an ndarray" msgstr "sort argument must be an ndarray" #: extmod/ulab/code/scipy/signal/signal.c msgid "sos array must be of shape (n_section, 6)" msgstr "sos array must be of shape (n_section, 6)" #: extmod/ulab/code/scipy/signal/signal.c msgid "sos[:, 3] should be all ones" msgstr "sos[:, 3] should be all ones" #: extmod/ulab/code/scipy/signal/signal.c msgid "sosfilt requires iterable arguments" msgstr "sosfilt requires iterable arguments" #: shared-bindings/bitmaptools/__init__.c shared-bindings/displayio/Bitmap.c msgid "source palette too large" msgstr "source palette too large" #: py/objstr.c msgid "start/end indices" msgstr "start/end indices" #: shared-bindings/displayio/Shape.c msgid "start_x should be an int" msgstr "start_x should be an int" #: shared-bindings/random/__init__.c msgid "step must be non-zero" msgstr "step must be non-zero" #: shared-bindings/busio/UART.c msgid "stop must be 1 or 2" msgstr "stop must be 1 or 2" #: shared-bindings/random/__init__.c msgid "stop not reachable from start" msgstr "stop not reachable from start" #: py/stream.c msgid "stream operation not supported" msgstr "stream operation not supported" #: py/objstrunicode.c msgid "string indices must be integers, not %q" msgstr "string indices must be integers, not %q" #: py/stream.c msgid "string not supported; use bytes or bytearray" msgstr "string not supported; use bytes or bytearray" #: extmod/moductypes.c msgid "struct: cannot index" msgstr "struct: cannot index" #: extmod/moductypes.c msgid "struct: no fields" msgstr "struct: no fields" #: py/objarray.c py/objstr.c msgid "substring not found" msgstr "substring not found" #: py/compile.c msgid "super() can't find self" msgstr "super() can't find self" #: extmod/modujson.c msgid "syntax error in JSON" msgstr "syntax error in JSON" #: extmod/moductypes.c msgid "syntax error in uctypes descriptor" msgstr "syntax error in uctypes descriptor" #: shared-bindings/touchio/TouchIn.c msgid "threshold must be in the range 0-65536" msgstr "threshold must be in the range 0-65536" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "tile must be greater than zero" msgstr "tile must be greater than zero" #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" msgstr "time.struct_time() takes a 9-sequence" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c #: ports/nrf/common-hal/watchdog/WatchDogTimer.c #: ports/raspberrypi/common-hal/watchdog/WatchDogTimer.c msgid "timeout duration exceeded the maximum supported value" msgstr "timeout duration exceeded the maximum supported value" #: shared-bindings/busio/UART.c msgid "timeout must be 0.0-100.0 seconds" msgstr "timeout must be 0.0-100.0 seconds" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "timeout must be < 655.35 secs" msgstr "timeout must be < 655.35 secs" #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "timeout must be >= 0.0" msgstr "timeout must be >= 0.0" #: shared-module/sdcardio/SDCard.c msgid "timeout waiting for v1 card" msgstr "timeout waiting for v1 card" #: shared-module/sdcardio/SDCard.c msgid "timeout waiting for v2 card" msgstr "timeout waiting for v2 card" #: shared-bindings/time/__init__.c msgid "timestamp out of range for platform time_t" msgstr "timestamp out of range for platform time_t" #: extmod/ulab/code/ndarray.c msgid "tobytes can be invoked for dense arrays only" msgstr "tobytes can be invoked for dense arrays only" #: shared-module/struct/__init__.c msgid "too many arguments provided with the given format" msgstr "too many arguments provided with the given format" #: extmod/ulab/code/ndarray.c extmod/ulab/code/ulab_create.c msgid "too many dimensions" msgstr "too many dimensions" #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "too many indices" #: py/runtime.c #, c-format msgid "too many values to unpack (expected %d)" msgstr "too many values to unpack (expected %d)" #: extmod/ulab/code/numpy/approx/approx.c msgid "trapz is defined for 1D arrays" msgstr "trapz is defined for 1D arrays" #: extmod/ulab/code/numpy/approx/approx.c msgid "trapz is defined for 1D arrays of equal length" msgstr "trapz is defined for 1D arrays of equal length" #: ports/esp32s2/common-hal/alarm/pin/__init__.c msgid "trigger level must be 0 or 1" msgstr "trigger level must be 0 or 1" #: py/obj.c msgid "tuple/list has wrong length" msgstr "tuple/list has wrong length" #: ports/esp32s2/common-hal/canio/CAN.c #, c-format msgid "twai_driver_install returned esp-idf error #%d" msgstr "twai_driver_install returned esp-idf error #%d" #: ports/esp32s2/common-hal/canio/CAN.c #, c-format msgid "twai_start returned esp-idf error #%d" msgstr "twai_start returned esp-idf error #%d" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/esp32s2/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c shared-bindings/canio/CAN.c msgid "tx and rx cannot both be None" msgstr "tx and rx cannot both be None" #: py/objtype.c msgid "type '%q' is not an acceptable base type" msgstr "type '%q' is not an acceptable base type" #: py/objtype.c msgid "type is not an acceptable base type" msgstr "type is not an acceptable base type" #: py/runtime.c msgid "type object '%q' has no attribute '%q'" msgstr "type object '%q' has no attribute '%q'" #: py/objgenerator.c msgid "type object 'generator' has no attribute '__await__'" msgstr "type object 'generator' has no attribute '__await__'" #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "type takes 1 or 3 arguments" #: py/objint_longlong.c msgid "ulonglong too large" msgstr "ulonglong too large" #: py/emitnative.c msgid "unary op %q not implemented" msgstr "unary op %q not implemented" #: py/parse.c msgid "unexpected indent" msgstr "unexpected indent" #: py/bc.c msgid "unexpected keyword argument" msgstr "unexpected keyword argument" #: py/bc.c py/objnamedtuple.c msgid "unexpected keyword argument '%q'" msgstr "unexpected keyword argument '%q'" #: py/lexer.c msgid "unicode name escapes" msgstr "unicode name escapes" #: py/parse.c msgid "unindent does not match any outer indentation level" msgstr "unindent does not match any outer indentation level" #: py/objstr.c #, c-format msgid "unknown conversion specifier %c" msgstr "unknown conversion specifier %c" #: py/objstr.c msgid "unknown format code '%c' for object of type '%q'" msgstr "unknown format code '%c' for object of type '%q'" #: py/compile.c msgid "unknown type" msgstr "unknown type" #: py/emitnative.c msgid "unknown type '%q'" msgstr "unknown type '%q'" #: py/objstr.c msgid "unmatched '{' in format" msgstr "unmatched '{' in format" #: py/objtype.c py/runtime.c msgid "unreadable attribute" msgstr "unreadable attribute" #: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c #: shared-module/vectorio/Polygon.c msgid "unsupported %q type" msgstr "unsupported %q type" #: py/emitinlinethumb.c #, c-format msgid "unsupported Thumb instruction '%s' with %d arguments" msgstr "unsupported Thumb instruction '%s' with %d arguments" #: py/emitinlinextensa.c #, c-format msgid "unsupported Xtensa instruction '%s' with %d arguments" msgstr "unsupported Xtensa instruction '%s' with %d arguments" #: py/objstr.c #, c-format msgid "unsupported format character '%c' (0x%x) at index %d" msgstr "unsupported format character '%c' (0x%x) at index %d" #: py/runtime.c msgid "unsupported type for %q: '%q'" msgstr "unsupported type for %q: '%q'" #: py/runtime.c msgid "unsupported type for operator" msgstr "unsupported type for operator" #: py/runtime.c msgid "unsupported types for %q: '%q', '%q'" msgstr "unsupported types for %q: '%q', '%q'" #: py/objint.c #, c-format msgid "value must fit in %d byte(s)" msgstr "value must fit in %d byte(s)" #: shared-bindings/displayio/Bitmap.c msgid "value_count must be > 0" msgstr "value_count must be > 0" #: ports/esp32s2/common-hal/alarm/pin/__init__.c msgid "wakeup conflict" msgstr "wakeup conflict" #: ports/esp32s2/common-hal/watchdog/WatchDogTimer.c msgid "watchdog not initialized" msgstr "WatchDog not initialised" #: shared-bindings/watchdog/WatchDogTimer.c msgid "watchdog timeout must be greater than 0" msgstr "WatchDog timeout must be greater than 0" #: shared-bindings/bitops/__init__.c #, c-format msgid "width must be from 2 to 8 (inclusive), not %d" msgstr "width must be from 2 to 8 (inclusive), not %d" #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "width must be greater than zero" msgstr "width must be greater than zero" #: ports/esp32s2/common-hal/wifi/Radio.c msgid "wifi is not enabled" msgstr "WiFi is not enabled" #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "window must be <= interval" #: extmod/ulab/code/numpy/numerical/numerical.c msgid "wrong axis index" msgstr "wrong axis index" #: extmod/ulab/code/ulab_create.c msgid "wrong axis specified" msgstr "wrong axis specified" #: extmod/ulab/code/numpy/compare/compare.c #: extmod/ulab/code/numpy/vector/vector.c msgid "wrong input type" msgstr "wrong input type" #: extmod/ulab/code/ulab_create.c py/objstr.c msgid "wrong number of arguments" msgstr "wrong number of arguments" #: py/runtime.c msgid "wrong number of values to unpack" msgstr "wrong number of values to unpack" #: extmod/ulab/code/ndarray.c msgid "wrong operand type" msgstr "wrong operand type" #: extmod/ulab/code/numpy/vector/vector.c msgid "wrong output type" msgstr "wrong output type" #: shared-module/displayio/Shape.c msgid "x value out of bounds" msgstr "x value out of bounds" #: ports/esp32s2/common-hal/audiobusio/__init__.c msgid "xTaskCreate failed" msgstr "xTaskCreate failed" #: shared-bindings/displayio/Shape.c msgid "y should be an int" msgstr "y should be an int" #: shared-module/displayio/Shape.c msgid "y value out of bounds" msgstr "y value out of bounds" #: py/objrange.c msgid "zero step" msgstr "zero step" #: extmod/ulab/code/scipy/signal/signal.c msgid "zi must be an ndarray" msgstr "zi must be an ndarray" #: extmod/ulab/code/scipy/signal/signal.c msgid "zi must be of float type" msgstr "zi must be of float type" #: extmod/ulab/code/scipy/signal/signal.c msgid "zi must be of shape (n_section, 2)" msgstr "zi must be of shape (n_section, 2)" #~ msgid "argument must be ndarray" #~ msgstr "argument must be ndarray" #~ msgid "norm is defined for 1D and 2D arrays" #~ msgstr "norm is defined for 1D and 2D arrays" #~ msgid "Nordic Soft Device failure assertion." #~ msgstr "Nordic Soft Device failure assertion." #~ msgid "Unknown soft device error: %04x" #~ msgstr "Unknown soft device error: %04x" #~ msgid "first argument must be an iterable" #~ msgstr "first argument must be an iterable" #~ msgid "iterables are not of the same length" #~ msgstr "iterables are not of the same length" #~ msgid "Selected CTS pin not valid" #~ msgstr "Selected CTS pin not valid" #~ msgid "Selected RTS pin not valid" #~ msgstr "Selected RTS pin not valid"