/* * This file is part of the Micro Python project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2020 Jeff Epler for Adafruit Industries * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include "py/obj.h" #include "py/objproperty.h" #include "py/runtime.h" #include "py/objarray.h" #include "shared-bindings/sdcardio/SDCard.h" #include "shared-module/sdcardio/SDCard.h" #include "common-hal/busio/SPI.h" #include "shared-bindings/busio/SPI.h" #include "shared-bindings/microcontroller/Pin.h" #include "supervisor/flash.h" //| class SDCard: //| """SD Card Block Interface //| //| Controls an SD card over SPI. This built-in module has higher read //| performance than the library adafruit_sdcard, but it is only compatible with //| `busio.SPI`, not `bitbangio.SPI`. Usually an SDCard object is used //| with ``storage.VfsFat`` to allow file I/O to an SD card.""" //| //| def __init__(self, bus: busio.SPI, cs: microcontroller.Pin, baudrate: int = 8000000) -> None: //| """Construct an SPI SD Card object with the given properties //| //| :param busio.SPI spi: The SPI bus //| :param microcontroller.Pin cs: The chip select connected to the card //| :param int baudrate: The SPI data rate to use after card setup //| //| Note that during detection and configuration, a hard-coded low baudrate is used. //| Data transfers use the specified baurate (rounded down to one that is supported by //| the microcontroller) //| //| .. important:: //| If the same SPI bus is shared with other peripherals, it is important that //| the SD card be initialized before accessing any other peripheral on the bus. //| Failure to do so can prevent the SD card from being recognized until it is //| powered off or re-inserted. //| //| Example usage: //| //| .. code-block:: python //| //| import os //| //| import board //| import sdcardio //| import storage //| //| sd = sdcardio.SDCard(board.SPI(), board.SD_CS) //| vfs = storage.VfsFat(sd) //| storage.mount(vfs, '/sd') //| os.listdir('/sd')""" STATIC mp_obj_t sdcardio_sdcard_make_new(const mp_obj_type_t *type, size_t n_args, size_t n_kw, const mp_obj_t *all_args) { enum { ARG_spi, ARG_cs, ARG_baudrate, NUM_ARGS }; static const mp_arg_t allowed_args[] = { { MP_QSTR_spi, MP_ARG_OBJ, {.u_obj = mp_const_none } }, { MP_QSTR_cs, MP_ARG_OBJ, {.u_obj = mp_const_none } }, { MP_QSTR_baudrate, MP_ARG_INT, {.u_int = 8000000} }, }; MP_STATIC_ASSERT(MP_ARRAY_SIZE(allowed_args) == NUM_ARGS); mp_arg_val_t args[MP_ARRAY_SIZE(allowed_args)]; mp_arg_parse_all_kw_array(n_args, n_kw, all_args, MP_ARRAY_SIZE(allowed_args), allowed_args, args); busio_spi_obj_t *spi = validate_obj_is_spi_bus(args[ARG_spi].u_obj); const mcu_pin_obj_t *cs = validate_obj_is_free_pin(args[ARG_cs].u_obj); sdcardio_sdcard_obj_t *self = m_new_obj(sdcardio_sdcard_obj_t); self->base.type = &sdcardio_SDCard_type; common_hal_sdcardio_sdcard_construct(self, spi, cs, args[ARG_baudrate].u_int); return self; } //| def count(self) -> int: //| """Returns the total number of sectors //| //| Due to technical limitations, this is a function and not a property. //| //| :return: The number of 512-byte blocks, as a number""" //| STATIC mp_obj_t sdcardio_sdcard_count(mp_obj_t self_in) { sdcardio_sdcard_obj_t *self = (sdcardio_sdcard_obj_t *)self_in; return mp_obj_new_int_from_ull(common_hal_sdcardio_sdcard_get_blockcount(self)); } MP_DEFINE_CONST_FUN_OBJ_1(sdcardio_sdcard_count_obj, sdcardio_sdcard_count); //| def deinit(self) -> None: //| """Disable permanently. //| //| :return: None""" //| STATIC mp_obj_t sdcardio_sdcard_deinit(mp_obj_t self_in) { sdcardio_sdcard_obj_t *self = (sdcardio_sdcard_obj_t *)self_in; common_hal_sdcardio_sdcard_deinit(self); return mp_const_none; } MP_DEFINE_CONST_FUN_OBJ_1(sdcardio_sdcard_deinit_obj, sdcardio_sdcard_deinit); //| def readblocks(self, start_block: int, buf: WriteableBuffer) -> None: //| //| """Read one or more blocks from the card //| //| :param int start_block: The block to start reading from //| :param ~_typing.WriteableBuffer buf: The buffer to write into. Length must be multiple of 512. //| //| :return: None""" //| STATIC mp_obj_t sdcardio_sdcard_readblocks(mp_obj_t self_in, mp_obj_t start_block_in, mp_obj_t buf_in) { uint32_t start_block = mp_obj_get_int(start_block_in); mp_buffer_info_t bufinfo; mp_get_buffer_raise(buf_in, &bufinfo, MP_BUFFER_WRITE); sdcardio_sdcard_obj_t *self = (sdcardio_sdcard_obj_t *)self_in; int result = common_hal_sdcardio_sdcard_readblocks(self, start_block, &bufinfo); if (result < 0) { mp_raise_OSError(-result); } return mp_const_none; } MP_DEFINE_CONST_FUN_OBJ_3(sdcardio_sdcard_readblocks_obj, sdcardio_sdcard_readblocks); //| def sync(self) -> None: //| """Ensure all blocks written are actually committed to the SD card //| //| :return: None""" //| ... STATIC mp_obj_t sdcardio_sdcard_sync(mp_obj_t self_in) { sdcardio_sdcard_obj_t *self = (sdcardio_sdcard_obj_t *)self_in; int result = common_hal_sdcardio_sdcard_sync(self); if (result < 0) { mp_raise_OSError(-result); } return mp_const_none; } MP_DEFINE_CONST_FUN_OBJ_1(sdcardio_sdcard_sync_obj, sdcardio_sdcard_sync); //| def writeblocks(self, start_block: int, buf: ReadableBuffer) -> None: //| //| """Write one or more blocks to the card //| //| :param int start_block: The block to start writing from //| :param ~_typing.ReadableBuffer buf: The buffer to read from. Length must be multiple of 512. //| //| :return: None""" //| STATIC mp_obj_t sdcardio_sdcard_writeblocks(mp_obj_t self_in, mp_obj_t start_block_in, mp_obj_t buf_in) { uint32_t start_block = mp_obj_get_int(start_block_in); mp_buffer_info_t bufinfo; mp_get_buffer_raise(buf_in, &bufinfo, MP_BUFFER_READ); sdcardio_sdcard_obj_t *self = (sdcardio_sdcard_obj_t *)self_in; int result = common_hal_sdcardio_sdcard_writeblocks(self, start_block, &bufinfo); if (result < 0) { mp_raise_OSError(-result); } return mp_const_none; } MP_DEFINE_CONST_FUN_OBJ_3(sdcardio_sdcard_writeblocks_obj, sdcardio_sdcard_writeblocks); STATIC const mp_rom_map_elem_t sdcardio_sdcard_locals_dict_table[] = { { MP_ROM_QSTR(MP_QSTR_count), MP_ROM_PTR(&sdcardio_sdcard_count_obj) }, { MP_ROM_QSTR(MP_QSTR_deinit), MP_ROM_PTR(&sdcardio_sdcard_deinit_obj) }, { MP_ROM_QSTR(MP_QSTR_readblocks), MP_ROM_PTR(&sdcardio_sdcard_readblocks_obj) }, { MP_ROM_QSTR(MP_QSTR_sync), MP_ROM_PTR(&sdcardio_sdcard_sync_obj) }, { MP_ROM_QSTR(MP_QSTR_writeblocks), MP_ROM_PTR(&sdcardio_sdcard_writeblocks_obj) }, }; STATIC MP_DEFINE_CONST_DICT(sdcardio_sdcard_locals_dict, sdcardio_sdcard_locals_dict_table); const mp_obj_type_t sdcardio_SDCard_type = { { &mp_type_type }, .name = MP_QSTR_SDCard, .make_new = sdcardio_sdcard_make_new, .locals_dict = (mp_obj_dict_t *)&sdcardio_sdcard_locals_dict, };