/***************************************************************************** * * hci.h - CC3000 Host Driver Implementation. * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the * distribution. * * Neither the name of Texas Instruments Incorporated nor the names of * its contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ #ifndef __HCI_H__ #define __HCI_H__ #include "cc3000_common.h" //***************************************************************************** // // If building with a C++ compiler, make all of the definitions in this header // have a C binding. // //***************************************************************************** #ifdef __cplusplus extern "C" { #endif #define SPI_HEADER_SIZE (5) #define SIMPLE_LINK_HCI_CMND_HEADER_SIZE (4) #define HEADERS_SIZE_CMD (SPI_HEADER_SIZE + SIMPLE_LINK_HCI_CMND_HEADER_SIZE) #define SIMPLE_LINK_HCI_DATA_CMND_HEADER_SIZE (5) #define SIMPLE_LINK_HCI_DATA_HEADER_SIZE (5) #define SIMPLE_LINK_HCI_PATCH_HEADER_SIZE (2) //***************************************************************************** // // Values that can be used as HCI Commands and HCI Packet header defines // //***************************************************************************** #define HCI_TYPE_CMND 0x1 #define HCI_TYPE_DATA 0x2 #define HCI_TYPE_PATCH 0x3 #define HCI_TYPE_EVNT 0x4 #define HCI_EVENT_PATCHES_DRV_REQ (1) #define HCI_EVENT_PATCHES_FW_REQ (2) #define HCI_EVENT_PATCHES_BOOTLOAD_REQ (3) #define HCI_CMND_WLAN_BASE (0x0000) #define HCI_CMND_WLAN_CONNECT 0x0001 #define HCI_CMND_WLAN_DISCONNECT 0x0002 #define HCI_CMND_WLAN_IOCTL_SET_SCANPARAM 0x0003 #define HCI_CMND_WLAN_IOCTL_SET_CONNECTION_POLICY 0x0004 #define HCI_CMND_WLAN_IOCTL_ADD_PROFILE 0x0005 #define HCI_CMND_WLAN_IOCTL_DEL_PROFILE 0x0006 #define HCI_CMND_WLAN_IOCTL_GET_SCAN_RESULTS 0x0007 #define HCI_CMND_EVENT_MASK 0x0008 #define HCI_CMND_WLAN_IOCTL_STATUSGET 0x0009 #define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_START 0x000A #define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_STOP 0x000B #define HCI_CMND_WLAN_IOCTL_SIMPLE_CONFIG_SET_PREFIX 0x000C #define HCI_CMND_WLAN_CONFIGURE_PATCH 0x000D #define HCI_CMND_SOCKET_BASE 0x1000 #define HCI_CMND_SOCKET 0x1001 #define HCI_CMND_BIND 0x1002 #define HCI_CMND_RECV 0x1004 #define HCI_CMND_ACCEPT 0x1005 #define HCI_CMND_LISTEN 0x1006 #define HCI_CMND_CONNECT 0x1007 #define HCI_CMND_BSD_SELECT 0x1008 #define HCI_CMND_SETSOCKOPT 0x1009 #define HCI_CMND_GETSOCKOPT 0x100A #define HCI_CMND_CLOSE_SOCKET 0x100B #define HCI_CMND_RECVFROM 0x100D #define HCI_CMND_GETHOSTNAME 0x1010 #define HCI_CMND_MDNS_ADVERTISE 0x1011 #define HCI_CMND_GETMSSVALUE 0x1012 #define HCI_DATA_BASE 0x80 #define HCI_CMND_SEND (0x01 + HCI_DATA_BASE) #define HCI_CMND_SENDTO (0x03 + HCI_DATA_BASE) #define HCI_DATA_BSD_RECVFROM (0x04 + HCI_DATA_BASE) #define HCI_DATA_BSD_RECV (0x05 + HCI_DATA_BASE) #define HCI_CMND_NVMEM_CBASE (0x0200) #define HCI_CMND_NVMEM_CREATE_ENTRY (0x0203) #define HCI_CMND_NVMEM_SWAP_ENTRY (0x0205) #define HCI_CMND_NVMEM_READ (0x0201) #define HCI_CMND_NVMEM_WRITE (0x0090) #define HCI_CMND_NVMEM_WRITE_PATCH (0x0204) #define HCI_CMND_READ_SP_VERSION (0x0207) #define HCI_CMND_READ_BUFFER_SIZE 0x400B #define HCI_CMND_SIMPLE_LINK_START 0x4000 #define HCI_CMND_NETAPP_BASE 0x2000 #define HCI_NETAPP_DHCP (0x0001 + HCI_CMND_NETAPP_BASE) #define HCI_NETAPP_PING_SEND (0x0002 + HCI_CMND_NETAPP_BASE) #define HCI_NETAPP_PING_REPORT (0x0003 + HCI_CMND_NETAPP_BASE) #define HCI_NETAPP_PING_STOP (0x0004 + HCI_CMND_NETAPP_BASE) #define HCI_NETAPP_IPCONFIG (0x0005 + HCI_CMND_NETAPP_BASE) #define HCI_NETAPP_ARP_FLUSH (0x0006 + HCI_CMND_NETAPP_BASE) #define HCI_NETAPP_SET_DEBUG_LEVEL (0x0008 + HCI_CMND_NETAPP_BASE) #define HCI_NETAPP_SET_TIMERS (0x0009 + HCI_CMND_NETAPP_BASE) //***************************************************************************** // // Values that can be used as HCI Events defines // //***************************************************************************** #define HCI_EVNT_WLAN_BASE 0x0000 #define HCI_EVNT_WLAN_CONNECT 0x0001 #define HCI_EVNT_WLAN_DISCONNECT \ 0x0002 #define HCI_EVNT_WLAN_IOCTL_ADD_PROFILE \ 0x0005 #define HCI_EVNT_SOCKET HCI_CMND_SOCKET #define HCI_EVNT_BIND HCI_CMND_BIND #define HCI_EVNT_RECV HCI_CMND_RECV #define HCI_EVNT_ACCEPT HCI_CMND_ACCEPT #define HCI_EVNT_LISTEN HCI_CMND_LISTEN #define HCI_EVNT_CONNECT HCI_CMND_CONNECT #define HCI_EVNT_SELECT HCI_CMND_BSD_SELECT #define HCI_EVNT_CLOSE_SOCKET HCI_CMND_CLOSE_SOCKET #define HCI_EVNT_RECVFROM HCI_CMND_RECVFROM #define HCI_EVNT_SETSOCKOPT HCI_CMND_SETSOCKOPT #define HCI_EVNT_GETSOCKOPT HCI_CMND_GETSOCKOPT #define HCI_EVNT_BSD_GETHOSTBYNAME HCI_CMND_GETHOSTNAME #define HCI_EVNT_MDNS_ADVERTISE HCI_CMND_MDNS_ADVERTISE #define HCI_EVNT_GETMSSVALUE HCI_CMND_GETMSSVALUE #define HCI_EVNT_SEND 0x1003 #define HCI_EVNT_WRITE 0x100E #define HCI_EVNT_SENDTO 0x100F #define HCI_EVNT_PATCHES_REQ 0x1000 #define HCI_EVNT_UNSOL_BASE 0x4000 #define HCI_EVNT_WLAN_UNSOL_BASE (0x8000) #define HCI_EVNT_WLAN_UNSOL_CONNECT (0x0001 + HCI_EVNT_WLAN_UNSOL_BASE) #define HCI_EVNT_WLAN_UNSOL_DISCONNECT (0x0002 + HCI_EVNT_WLAN_UNSOL_BASE) #define HCI_EVNT_WLAN_UNSOL_INIT (0x0004 + HCI_EVNT_WLAN_UNSOL_BASE) #define HCI_EVNT_WLAN_TX_COMPLETE (0x0008 + HCI_EVNT_WLAN_UNSOL_BASE) #define HCI_EVNT_WLAN_UNSOL_DHCP (0x0010 + HCI_EVNT_WLAN_UNSOL_BASE) #define HCI_EVNT_WLAN_ASYNC_PING_REPORT (0x0040 + HCI_EVNT_WLAN_UNSOL_BASE) #define HCI_EVNT_WLAN_ASYNC_SIMPLE_CONFIG_DONE (0x0080 + HCI_EVNT_WLAN_UNSOL_BASE) #define HCI_EVNT_WLAN_KEEPALIVE (0x0200 + HCI_EVNT_WLAN_UNSOL_BASE) #define HCI_EVNT_BSD_TCP_CLOSE_WAIT (0x0800 + HCI_EVNT_WLAN_UNSOL_BASE) #define HCI_EVNT_DATA_UNSOL_FREE_BUFF \ 0x4100 #define HCI_EVNT_NVMEM_CREATE_ENTRY \ HCI_CMND_NVMEM_CREATE_ENTRY #define HCI_EVNT_NVMEM_SWAP_ENTRY HCI_CMND_NVMEM_SWAP_ENTRY #define HCI_EVNT_NVMEM_READ HCI_CMND_NVMEM_READ #define HCI_EVNT_NVMEM_WRITE (0x0202) #define HCI_EVNT_READ_SP_VERSION \ HCI_CMND_READ_SP_VERSION #define HCI_EVNT_INPROGRESS 0xFFFF #define HCI_DATA_RECVFROM 0x84 #define HCI_DATA_RECV 0x85 #define HCI_DATA_NVMEM 0x91 #define HCI_EVENT_CC3000_CAN_SHUT_DOWN 0x99 //***************************************************************************** // // Prototypes for the structures for APIs. // //***************************************************************************** #define HCI_DATA_HEADER_SIZE (5) #define HCI_EVENT_HEADER_SIZE (5) #define HCI_DATA_CMD_HEADER_SIZE (5) #define HCI_PATCH_HEADER_SIZE (6) #define HCI_PACKET_TYPE_OFFSET (0) #define HCI_PACKET_ARGSIZE_OFFSET (2) #define HCI_PACKET_LENGTH_OFFSET (3) #define HCI_EVENT_OPCODE_OFFSET (1) #define HCI_EVENT_LENGTH_OFFSET (3) #define HCI_EVENT_STATUS_OFFSET (4) #define HCI_DATA_LENGTH_OFFSET (3) //***************************************************************************** // // Prototypes for the APIs. // //***************************************************************************** //***************************************************************************** // //! hci_command_send //! //! @param usOpcode command operation code //! @param pucBuff pointer to the command's arguments buffer //! @param ucArgsLength length of the arguments //! //! @return none //! //! @brief Initiate an HCI command. // //***************************************************************************** extern UINT16 hci_command_send(UINT16 usOpcode, UINT8 *ucArgs, UINT8 ucArgsLength); //***************************************************************************** // //! hci_data_send //! //! @param usOpcode command operation code //! @param ucArgs pointer to the command's arguments buffer //! @param usArgsLength length of the arguments //! @param ucTail pointer to the data buffer //! @param usTailLength buffer length //! //! @return none //! //! @brief Initiate an HCI data write operation // //***************************************************************************** extern INT32 hci_data_send(UINT8 ucOpcode, UINT8 *ucArgs, UINT16 usArgsLength, UINT16 usDataLength, const UINT8 *ucTail, UINT16 usTailLength); //***************************************************************************** // //! hci_data_command_send //! //! @param usOpcode command operation code //! @param pucBuff pointer to the data buffer //! @param ucArgsLength arguments length //! @param ucDataLength data length //! //! @return none //! //! @brief Prepare HCI header and initiate an HCI data write operation // //***************************************************************************** extern void hci_data_command_send(UINT16 usOpcode, UINT8 *pucBuff, UINT8 ucArgsLength, UINT16 ucDataLength); //***************************************************************************** // //! hci_patch_send //! //! @param usOpcode command operation code //! @param pucBuff pointer to the command's arguments buffer //! @param patch pointer to patch content buffer //! @param usDataLength data length //! //! @return none //! //! @brief Prepare HCI header and initiate an HCI patch write operation // //***************************************************************************** extern void hci_patch_send(UINT8 ucOpcode, UINT8 *pucBuff, CHAR *patch, UINT16 usDataLength); //***************************************************************************** // // Mark the end of the C bindings section for C++ compilers. // //***************************************************************************** #ifdef __cplusplus } #endif // __cplusplus #endif // __HCI_H__