# Use internal flash for CIRCUITPY drive INTERNAL_FLASH_FILESYSTEM = 1 # Internal math library is substantially smaller than toolchain one INTERNAL_LIBM = 0 # Longints can be implemented as mpz, as longlong, or not LONGINT_IMPL = MPZ # Default to no-psram CIRCUITPY_ESP_PSRAM_SIZE ?= 0 # Enable more features CIRCUITPY_FULL_BUILD ?= 1 # These modules are implemented in ports//common-hal: CIRCUITPY_ALARM ?= 1 CIRCUITPY_ANALOGBUFIO ?= 1 CIRCUITPY_AUDIOBUSIO ?= 1 CIRCUITPY_AUDIOBUSIO_PDMIN ?= 0 CIRCUITPY_AUDIOIO ?= 0 CIRCUITPY_AUDIOMP3 ?= 0 CIRCUITPY_BLEIO ?= 1 CIRCUITPY_BLEIO_HCI = 0 CIRCUITPY_CANIO ?= 1 CIRCUITPY_COUNTIO ?= 1 CIRCUITPY_DOTCLOCKFRAMEBUFFER_USES_SUPERVISOR_ALLOCATION = 0 CIRCUITPY_DUALBANK ?= 1 CIRCUITPY_ESPCAMERA ?= 1 CIRCUITPY_ESPIDF ?= 1 CIRCUITPY_ESPULP ?= 1 CIRCUITPY_FRAMEBUFFERIO ?= 1 CIRCUITPY_FREQUENCYIO ?= 1 CIRCUITPY_HASHLIB ?= 1 CIRCUITPY_I2CTARGET ?= 1 CIRCUITPY_IMAGECAPTURE = 0 CIRCUITPY_MEMORYMAP ?= 1 CIRCUITPY_NVM ?= 1 # Turn off because it uses the old I2S driver which conflicts with the new ADC driver. CIRCUITPY_PARALLELDISPLAY ?= 0 CIRCUITPY_PS2IO ?= 1 CIRCUITPY_RGBMATRIX ?= 1 CIRCUITPY_ROTARYIO ?= 1 CIRCUITPY_SYNTHIO_MAX_CHANNELS ?= 12 CIRCUITPY_TOUCHIO_USE_NATIVE ?= 1 CIRCUITPY_WATCHDOG ?= 1 CIRCUITPY_WIFI ?= 1 # Conditionally turn off modules/features ifeq ($(IDF_TARGET),esp32) # Modules CIRCUITPY_RGBMATRIX = 0 CIRCUITPY_BLEIO = 0 # Features CIRCUITPY_USB = 0 else ifeq ($(IDF_TARGET),esp32c3) # Modules CIRCUITPY_ALARM = 0 CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_COUNTIO = 0 CIRCUITPY_ESPCAMERA = 0 CIRCUITPY_ESPULP = 0 CIRCUITPY_FREQUENCYIO = 0 CIRCUITPY_MEMORYMAP = 0 CIRCUITPY_PARALLELDISPLAY = 0 CIRCUITPY_ROTARYIO = 0 CIRCUITPY_TOUCHIO ?= 1 CIRCUITPY_TOUCHIO_USE_NATIVE = 0 # Features CIRCUITPY_USB = 0 CIRCUITPY_ESP_USB_SERIAL_JTAG ?= 1 else ifeq ($(IDF_TARGET),esp32c6) # Modules CIRCUITPY_ALARM = 0 CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_ESPCAMERA = 0 CIRCUITPY_ESPULP = 0 CIRCUITPY_MEMORYMAP = 0 CIRCUITPY_PARALLELDISPLAY = 0 CIRCUITPY_TOUCHIO ?= 1 CIRCUITPY_TOUCHIO_USE_NATIVE = 0 # Features CIRCUITPY_USB = 0 CIRCUITPY_ESP_USB_SERIAL_JTAG ?= 1 else ifeq ($(IDF_TARGET),esp32h2) # Modules CIRCUITPY_ALARM = 0 # Turn off analogio because calibration is currently supported. # https://github.com/espressif/esp-idf/issues/11038 CIRCUITPY_ANALOGIO = 0 CIRCUITPY_AUDIOBUSIO = 0 CIRCUITPY_ESPCAMERA = 0 CIRCUITPY_ESPULP = 0 CIRCUITPY_MEMORYMAP = 0 CIRCUITPY_PARALLELDISPLAY = 0 CIRCUITPY_RGBMATRIX = 0 CIRCUITPY_TOUCHIO ?= 1 CIRCUITPY_TOUCHIO_USE_NATIVE = 0 # Features CIRCUITPY_USB = 0 CIRCUITPY_ESP_USB_SERIAL_JTAG ?= 1 CIRCUITPY_WIFI = 0 else ifeq ($(IDF_TARGET),esp32s2) # Modules CIRCUITPY_BLEIO = 0 CIRCUITPY_RGBMATRIX_USES_SUPERVISOR_ALLOCATION = 0 CIRCUITPY_ESP_USB_SERIAL_JTAG ?= 0 else ifeq ($(IDF_TARGET),esp32s3) # Modules CIRCUITPY_PARALLELDISPLAY = 0 CIRCUITPY_RGBMATRIX_USES_SUPERVISOR_ALLOCATION = 0 CIRCUITPY_ESP_USB_SERIAL_JTAG ?= 0 endif # No room for dualbank on boards with 2MB flash ifeq ($(CIRCUITPY_ESP_FLASH_SIZE),2MB) CIRCUITPY_DUALBANK = 0 endif # Modules dependent on other modules CIRCUITPY_ESPNOW ?= $(CIRCUITPY_WIFI) CIRCUITPY_GIFIO ?= $(CIRCUITPY_ESPCAMERA) CIRCUITPY_QRIO ?= $(CIRCUITPY_ESPCAMERA) # Features dependent on other features ifneq ($(CIRCUITPY_USB),0) CIRCUITPY_BUILD_EXTENSIONS ?= bin,uf2 else CIRCUITPY_BUILD_EXTENSIONS ?= bin endif # From ESP32-S2/S3 Technical Reference Manual: # # Endpoint number 0 always present (bi-directional, consisting of EP0 IN and EP0 OUT) # Six additional endpoints (endpoint numbers 1 to 6), configurable as IN or OUT # Maximum of five IN endpoints concurrently active at any time (including EP0 IN) # # Due to the limited number of endpoints, some USB devices will be off by default. # For instance MIDI is available, but the device is turned off. It can be turned on # only if something else is turned off, such as HID. USB_NUM_ENDPOINT_PAIRS = 7 USB_NUM_IN_ENDPOINTS = 5