/* * This file is part of the MicroPython project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2018 Damien P. George * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ // Common settings and defaults for board configuration. // The defaults here should be overridden in mpconfigboard.h. #include STM32_HAL_H /*****************************************************************************/ // Feature settings with defaults // Whether to include the stm module, with peripheral register constants #ifndef MICROPY_PY_STM #define MICROPY_PY_STM (1) #endif // Whether to include legacy functions and classes in the pyb module #ifndef MICROPY_PY_PYB_LEGACY #define MICROPY_PY_PYB_LEGACY (1) #endif // Whether to enable storage on the internal flash of the MCU #ifndef MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE #define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (1) #endif // Whether to enable the RTC, exposed as pyb.RTC #ifndef MICROPY_HW_ENABLE_RTC #define MICROPY_HW_ENABLE_RTC (0) #endif // Whether to enable the hardware RNG peripheral, exposed as pyb.rng() #ifndef MICROPY_HW_ENABLE_RNG #define MICROPY_HW_ENABLE_RNG (0) #endif // Whether to enable the ADC peripheral, exposed as pyb.ADC and pyb.ADCAll #ifndef MICROPY_HW_ENABLE_ADC #define MICROPY_HW_ENABLE_ADC (1) #endif // Whether to enable the DAC peripheral, exposed as pyb.DAC #ifndef MICROPY_HW_ENABLE_DAC #define MICROPY_HW_ENABLE_DAC (0) #endif // Whether to enable the DCMI peripheral #ifndef MICROPY_HW_ENABLE_DCMI #define MICROPY_HW_ENABLE_DCMI (0) #endif // Whether to enable USB support #ifndef MICROPY_HW_ENABLE_USB #define MICROPY_HW_ENABLE_USB (0) #endif // Whether to enable the PA0-PA3 servo driver, exposed as pyb.Servo #ifndef MICROPY_HW_ENABLE_SERVO #define MICROPY_HW_ENABLE_SERVO (0) #endif // Whether to enable a USR switch, exposed as pyb.Switch #ifndef MICROPY_HW_HAS_SWITCH #define MICROPY_HW_HAS_SWITCH (0) #endif // Whether to expose internal flash storage as pyb.Flash #ifndef MICROPY_HW_HAS_FLASH #define MICROPY_HW_HAS_FLASH (0) #endif // Whether to enable the SD card interface, exposed as pyb.SDCard #ifndef MICROPY_HW_ENABLE_SDCARD #define MICROPY_HW_ENABLE_SDCARD (0) #endif // Whether to enable the MMC interface, exposed as pyb.MMCard #ifndef MICROPY_HW_ENABLE_MMCARD #define MICROPY_HW_ENABLE_MMCARD (0) #endif // SD/MMC interface bus width (defaults to 4 bits) #ifndef MICROPY_HW_SDMMC_BUS_WIDTH #define MICROPY_HW_SDMMC_BUS_WIDTH (4) #endif // Whether to automatically mount (and boot from) the SD card if it's present #ifndef MICROPY_HW_SDCARD_MOUNT_AT_BOOT #define MICROPY_HW_SDCARD_MOUNT_AT_BOOT (MICROPY_HW_ENABLE_SDCARD) #endif // Whether to enable the MMA7660 driver, exposed as pyb.Accel #ifndef MICROPY_HW_HAS_MMA7660 #define MICROPY_HW_HAS_MMA7660 (0) #endif // Whether to enable the LCD32MK driver, exposed as pyb.LCD #ifndef MICROPY_HW_HAS_LCD #define MICROPY_HW_HAS_LCD (0) #endif // The volume label used when creating the flash filesystem #ifndef MICROPY_HW_FLASH_FS_LABEL #define MICROPY_HW_FLASH_FS_LABEL "pybflash" #endif // Function to determine if the given can_id is reserved for system use or not. #ifndef MICROPY_HW_CAN_IS_RESERVED #define MICROPY_HW_CAN_IS_RESERVED(can_id) (false) #endif // Function to determine if the given i2c_id is reserved for system use or not. #ifndef MICROPY_HW_I2C_IS_RESERVED #define MICROPY_HW_I2C_IS_RESERVED(i2c_id) (false) #endif // Function to determine if the given spi_id is reserved for system use or not. #ifndef MICROPY_HW_SPI_IS_RESERVED #define MICROPY_HW_SPI_IS_RESERVED(spi_id) (false) #endif // Function to determine if the given tim_id is reserved for system use or not. #ifndef MICROPY_HW_TIM_IS_RESERVED #define MICROPY_HW_TIM_IS_RESERVED(tim_id) (false) #endif // Function to determine if the given uart_id is reserved for system use or not. #ifndef MICROPY_HW_UART_IS_RESERVED #define MICROPY_HW_UART_IS_RESERVED(uart_id) (false) #endif /*****************************************************************************/ // General configuration // Heap start / end definitions #ifndef MICROPY_HEAP_START #define MICROPY_HEAP_START &_heap_start #endif #ifndef MICROPY_HEAP_END #define MICROPY_HEAP_END &_heap_end #endif // Configuration for STM32F0 series #if defined(STM32F0) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1ffff7ac) #define PYB_EXTI_NUM_VECTORS (23) #define MICROPY_HW_MAX_I2C (2) #define MICROPY_HW_MAX_TIMER (17) #define MICROPY_HW_MAX_UART (8) // Configuration for STM32F4 series #elif defined(STM32F4) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1fff7a10) #define PYB_EXTI_NUM_VECTORS (23) #define MICROPY_HW_MAX_I2C (3) #define MICROPY_HW_MAX_TIMER (14) #if defined(UART10) #define MICROPY_HW_MAX_UART (10) #elif defined(UART9) #define MICROPY_HW_MAX_UART (9) #elif defined(UART8) #define MICROPY_HW_MAX_UART (8) #elif defined(UART7) #define MICROPY_HW_MAX_UART (7) #else #define MICROPY_HW_MAX_UART (6) #endif // Configuration for STM32F7 series #elif defined(STM32F7) #if defined(STM32F722xx) || defined(STM32F723xx) || defined(STM32F732xx) || defined(STM32F733xx) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1ff07a10) #else #define MP_HAL_UNIQUE_ID_ADDRESS (0x1ff0f420) #endif #define PYB_EXTI_NUM_VECTORS (24) #define MICROPY_HW_MAX_I2C (4) #define MICROPY_HW_MAX_TIMER (17) #define MICROPY_HW_MAX_UART (8) // Configuration for STM32H7 series #elif defined(STM32H7) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1ff1e800) #define PYB_EXTI_NUM_VECTORS (24) #define MICROPY_HW_MAX_I2C (4) #define MICROPY_HW_MAX_TIMER (17) #define MICROPY_HW_MAX_UART (8) // Configuration for STM32L0 series #elif defined(STM32L0) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1FF80050) #define PYB_EXTI_NUM_VECTORS (30) // TODO (22 configurable, 7 direct) #define MICROPY_HW_MAX_I2C (3) #define MICROPY_HW_MAX_TIMER (22) #define MICROPY_HW_MAX_UART (5) // Configuration for STM32L4 series #elif defined(STM32L4) #define MP_HAL_UNIQUE_ID_ADDRESS (0x1fff7590) #define PYB_EXTI_NUM_VECTORS (23) #define MICROPY_HW_MAX_I2C (4) #define MICROPY_HW_MAX_TIMER (17) #define MICROPY_HW_MAX_UART (6) // Configuration for STM32WB series #elif defined(STM32WB) #define MP_HAL_UNIQUE_ID_ADDRESS (UID_BASE) #define PYB_EXTI_NUM_VECTORS (20) #define MICROPY_HW_MAX_I2C (3) #define MICROPY_HW_MAX_TIMER (17) #define MICROPY_HW_MAX_UART (1) #ifndef MICROPY_HW_STM32WB_FLASH_SYNCRONISATION #define MICROPY_HW_STM32WB_FLASH_SYNCRONISATION (1) #endif #else #error Unsupported MCU series #endif #if MICROPY_HW_CLK_USE_HSI // Use HSI as clock source #define MICROPY_HW_CLK_VALUE (HSI_VALUE) #define MICROPY_HW_RCC_OSCILLATOR_TYPE (RCC_OSCILLATORTYPE_HSI) #define MICROPY_HW_RCC_PLL_SRC (RCC_PLLSOURCE_HSI) #define MICROPY_HW_RCC_CR_HSxON (RCC_CR_HSION) #define MICROPY_HW_RCC_HSI_STATE (RCC_HSI_ON) #define MICROPY_HW_RCC_FLAG_HSxRDY (RCC_FLAG_HSIRDY) #define MICROPY_HW_RCC_HSE_STATE (RCC_HSE_OFF) #else // Use HSE as a clock source (bypass or oscillator) #define MICROPY_HW_CLK_VALUE (HSE_VALUE) #define MICROPY_HW_RCC_OSCILLATOR_TYPE (RCC_OSCILLATORTYPE_HSE) #define MICROPY_HW_RCC_PLL_SRC (RCC_PLLSOURCE_HSE) #define MICROPY_HW_RCC_CR_HSxON (RCC_CR_HSEON) #define MICROPY_HW_RCC_HSI_STATE (RCC_HSI_OFF) #define MICROPY_HW_RCC_FLAG_HSxRDY (RCC_FLAG_HSERDY) #if MICROPY_HW_CLK_USE_BYPASS #define MICROPY_HW_RCC_HSE_STATE (RCC_HSE_BYPASS) #else #define MICROPY_HW_RCC_HSE_STATE (RCC_HSE_ON) #endif #endif // If disabled then try normal (non-bypass) LSE first, with fallback to LSI. // If enabled first try LSE in bypass mode. If that fails to start, try non-bypass mode, with fallback to LSI. #ifndef MICROPY_HW_RTC_USE_BYPASS #define MICROPY_HW_RTC_USE_BYPASS (0) #endif #if MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE // Provide block device macros if internal flash storage is enabled #define MICROPY_HW_BDEV_IOCTL flash_bdev_ioctl #define MICROPY_HW_BDEV_READBLOCK flash_bdev_readblock #define MICROPY_HW_BDEV_WRITEBLOCK flash_bdev_writeblock #endif // Enable the storage sub-system if a block device is defined #if defined(MICROPY_HW_BDEV_IOCTL) #define MICROPY_HW_ENABLE_STORAGE (1) #else #define MICROPY_HW_ENABLE_STORAGE (0) #endif // Enable hardware I2C if there are any peripherals defined #if defined(MICROPY_HW_I2C1_SCL) || defined(MICROPY_HW_I2C2_SCL) \ || defined(MICROPY_HW_I2C3_SCL) || defined(MICROPY_HW_I2C4_SCL) #define MICROPY_HW_ENABLE_HW_I2C (1) #else #define MICROPY_HW_ENABLE_HW_I2C (0) #endif // Enable CAN if there are any peripherals defined #if defined(MICROPY_HW_CAN1_TX) || defined(MICROPY_HW_CAN2_TX) || defined(MICROPY_HW_CAN3_TX) #define MICROPY_HW_ENABLE_CAN (1) #if defined(STM32H7) #define MICROPY_HW_ENABLE_FDCAN (1) // define for MCUs with FDCAN #endif #else #define MICROPY_HW_ENABLE_CAN (0) #define MICROPY_HW_MAX_CAN (0) #endif #if defined(MICROPY_HW_CAN3_TX) #define MICROPY_HW_MAX_CAN (3) #elif defined(MICROPY_HW_CAN2_TX) #define MICROPY_HW_MAX_CAN (2) #elif defined(MICROPY_HW_CAN1_TX) #define MICROPY_HW_MAX_CAN (1) #endif // Whether the USB peripheral is device-only, or multiple OTG #if defined(STM32L0) || defined(STM32L432xx) || defined(STM32WB) #define MICROPY_HW_USB_IS_MULTI_OTG (0) #else #define MICROPY_HW_USB_IS_MULTI_OTG (1) #endif // Configure maximum number of CDC VCP interfaces, and whether MSC/HID are supported #ifndef MICROPY_HW_USB_CDC_NUM #define MICROPY_HW_USB_CDC_NUM (1) #endif #ifndef MICROPY_HW_USB_MSC #define MICROPY_HW_USB_MSC (MICROPY_HW_ENABLE_USB) #endif #ifndef MICROPY_HW_USB_HID #define MICROPY_HW_USB_HID (MICROPY_HW_ENABLE_USB) #endif // Pin definition header file #define MICROPY_PIN_DEFS_PORT_H "pin_defs_stm32.h" // D-cache clean/invalidate helpers #if __DCACHE_PRESENT == 1 #define MP_HAL_CLEANINVALIDATE_DCACHE(addr, size) \ (SCB_CleanInvalidateDCache_by_Addr((uint32_t *)((uint32_t)addr & ~0x1f), \ ((uint32_t)((uint8_t *)addr + size + 0x1f) & ~0x1f) - ((uint32_t)addr & ~0x1f))) #define MP_HAL_CLEAN_DCACHE(addr, size) \ (SCB_CleanDCache_by_Addr((uint32_t *)((uint32_t)addr & ~0x1f), \ ((uint32_t)((uint8_t *)addr + size + 0x1f) & ~0x1f) - ((uint32_t)addr & ~0x1f))) #else #define MP_HAL_CLEANINVALIDATE_DCACHE(addr, size) #define MP_HAL_CLEAN_DCACHE(addr, size) #endif #define MICROPY_HW_USES_BOOTLOADER (MICROPY_HW_VTOR != 0x08000000)