#define USB_REPL

#define MICROPY_HW_BOARD_NAME "Adafruit Itsy Bitsy M0 Express"
#define MICROPY_HW_MCU_NAME "samd21g18"

#define CIRCUITPY_BITBANG_APA102
#define MICROPY_HW_APA102_MOSI   (&pin_PA01)
#define MICROPY_HW_APA102_SCK    (&pin_PA00)

// Salae reads 12mhz which is the limit even though we set it to the safer 8mhz.
#define SPI_FLASH_BAUDRATE  (8000000)

#define SPI_FLASH_PAD0_PINMUX PINMUX_UNUSED // CS
// Use default pinmux for the chip select since we manage it ourselves.
#define SPI_FLASH_PAD1_PINMUX PINMUX_PB03D_SERCOM5_PAD1 // MISO
#define SPI_FLASH_MISO_PAD          1
#define SPI_FLASH_PAD2_PINMUX PINMUX_PB22D_SERCOM5_PAD2 // MOSI
#define SPI_FLASH_MOSI_PAD          2
#define SPI_FLASH_PAD3_PINMUX PINMUX_PB23D_SERCOM5_PAD3 // SCK
#define SPI_FLASH_SCK_PAD           3

#define SPI_FLASH_CS          PIN_PA27
#define SPI_FLASH_SERCOM      SERCOM5

#define SPI_FLASH_MOSI          PIN_PB22
#define SPI_FLASH_MISO          PIN_PB03
#define SPI_FLASH_SCK           PIN_PB23
#define SPI_FLASH_SERCOM_INDEX      5
// <o> Transmit Data Pinout
// <0x0=>PAD[0,1]_DO_SCK
// <0x1=>PAD[2,3]_DO_SCK
// <0x2=>PAD[3,1]_DO_SCK
// <0x3=>PAD[0,3]_DO_SCK
#define SPI_FLASH_DOPO              1
#define SPI_FLASH_DIPO              1   // same as MISO pad
#define SPI_FLASH_MUX_SETTING SPI_SIGNAL_MUX_SETTING_F


// These are pins not to reset.
#define MICROPY_PORT_A        (PORT_PA00 | PORT_PA01 | PORT_PA27 | PORT_PA24 | PORT_PA25)
#define MICROPY_PORT_B        (PORT_PB22 | PORT_PB23 | PORT_PB03 )
#define MICROPY_PORT_C        (0)

#include "spi_flash.h"

// If you change this, then make sure to update the linker scripts as well to
// make sure you don't overwrite code.
#define CIRCUITPY_INTERNAL_NVM_SIZE 256

#define BOARD_FLASH_SIZE (0x00040000 - 0x2000 - CIRCUITPY_INTERNAL_NVM_SIZE)

#include "flash_GD25Q16C.h"
#include "flash_W25Q16FW.h"

#define CALIBRATE_CRYSTALLESS 1