/* * This file is part of the MicroPython project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include "shared-bindings/board/__init__.h" #include "shared-bindings/displayio/FourWire.h" #include "shared-module/displayio/__init__.h" #include "shared-module/displayio/mipi_constants.h" #include "shared-bindings/busio/SPI.h" #include "shared-bindings/microcontroller/Pin.h" #include "src/rp2_common/hardware_gpio/include/hardware/gpio.h" #include "supervisor/board.h" #include "supervisor/shared/board.h" displayio_fourwire_obj_t board_display_obj; #define DELAY 0x80 uint8_t display_init_sequence[] = { 0xae, 0, // sleep 0xd5, 1, 0x80, // fOsc divide by 2 0xa8, 1, 0x3f, // multiplex 64 0xd3, 1, 0x00, // offset 0 0x40, 1, 0x00, // start line 0 0xad, 1, 0x8b, // dc/dc on 0xa1, 0, // segment remap = 0 0xc8, 0, // scan incr 0xda, 1, 0x12, // com pins 0x81, 1, 0xff, // contrast 255 0xd9, 1, 0x1f, // pre/dis-charge 2DCLKs/2CLKs 0xdb, 1, 0x20, // VCOM deslect 0.770 0x20, 1, 0x20, 0x33, 0, // VPP 9V 0xa6, 0, // not inverted 0xa4, 0, // normal 0xaf, 0, // on }; void board_init(void) { busio_spi_obj_t *spi = &displays[0].fourwire_bus.inline_bus; common_hal_busio_spi_construct(spi, &pin_GPIO26, &pin_GPIO27, NULL, false); common_hal_busio_spi_never_reset(spi); displayio_fourwire_obj_t *bus = &displays[0].fourwire_bus; bus->base.type = &displayio_fourwire_type; common_hal_displayio_fourwire_construct(bus, spi, &pin_GPIO24, // Command or data &pin_GPIO22, // Chip select &pin_GPIO23, // Reset 10000000, // Baudrate 0, // Polarity 0); // Phase displayio_display_obj_t *display = &displays[0].display; display->base.type = &displayio_display_type; common_hal_displayio_display_construct(display, bus, 128, // Width 64, // Height 2, // column start 0, // row start 0, // rotation 1, // Color depth true, // grayscale false, // pixels in byte share row. Only used with depth < 8 1, // bytes per cell. Only valid for depths < 8 false, // reverse_pixels_in_byte. Only valid for depths < 8 true, // reverse_pixels_in_word 0, // Set column command 0, // Set row command 0, // Write memory command display_init_sequence, sizeof(display_init_sequence), NULL, 0x81, 1.0f, // brightness true, // single_byte_bounds true, // data as commands true, // auto_refresh 60, // native_frames_per_second true, // backlight_on_high true, // SH1107_addressing 50000); // backlight pwm frequency } void reset_board(void) { // turn off any left over LED board_reset_user_neopixels(&pin_GPIO19, 12); } // Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.