/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include "boards/board.h"
#include "mpconfigboard.h"

#include "shared-bindings/board/__init__.h"
#include "shared-bindings/displayio/FourWire.h"
#include "shared-module/displayio/__init__.h"
#include "shared-module/displayio/mipi_constants.h"
#include "shared-bindings/busio/SPI.h"

#include "supervisor/spi_flash_api.h"

displayio_fourwire_obj_t board_display_obj;

#define DELAY 0x80

uint8_t display_init_sequence[] = {
    0x01, 0 | DELAY, 150, // SWRESET
	0x11, 0 | DELAY, 255, // SLPOUT
	0xb1, 3, 0x01, 0x2C, 0x2D, // _FRMCTR1
	0xb2, 3, 0x01, 0x2C, 0x2D, //
	0xb3, 6, 0x01, 0x2C, 0x2D, 0x01, 0x2C, 0x2D,
	0xb4, 1, 0x07, // _INVCTR line inversion
	0xc0, 3, 0xa2, 0x02, 0x84, // _PWCTR1 GVDD = 4.7V, 1.0uA
	0xc1, 1, 0xc5, // _PWCTR2 VGH=14.7V, VGL=-7.35V
	0xc2, 2, 0x0a, 0x00, // _PWCTR3 Opamp current small, Boost frequency
	0xc3, 2, 0x8a, 0x2a,
	0xc4, 2, 0x8a, 0xee,
	0xc5, 1, 0x0e, // _VMCTR1 VCOMH = 4V, VOML = -1.1V
	0x20, 0, // _INVOFF //MISMATCh 0x2a vs 0x20
	0x36, 1, 0x18, // _MADCTL bottom to top refresh
	// 1 clk cycle nonoverlap, 2 cycle gate rise, 3 sycle osc equalie,
	// fix on VTL
	0x3a, 1, 0x05, // COLMOD - 16bit color
	0xe0, 0x10, 0x02, 0x1c, 0x07, 0x12,
				0x37, 0x32, 0x29, 0x2d,
				0x29, 0x25, 0x2B, 0x39,
				0x00, 0x01, 0x03, 0x10, // _GMCTRP1 Gamma
	0xe1, 0x10, 0x03, 0x1d, 0x07, 0x06,
				0x2E, 0x2C, 0x29, 0x2D,
				0x2E, 0x2E, 0x37, 0x3F,
				0x00, 0x00, 0x02, 0x10, // _GMCTRN1
	0x13, 0 | DELAY, 10, // _NORON
	0x29, 0 | DELAY, 100, // _DISPON
};

void board_init(void) {
    displayio_fourwire_obj_t* bus = &displays[0].fourwire_bus;
    bus->base.type = &displayio_fourwire_type;
    busio_spi_obj_t *internal_spi = &supervisor_flash_spi_bus;
    common_hal_displayio_fourwire_construct(bus,
        internal_spi,
        &pin_PA08, // Command or data
        &pin_PB12, // Chip select
        &pin_PB10, // Reset
        24000000, // Baudrate
        0, // Polarity
        0); // Phase

    displayio_display_obj_t* display = &displays[0].display;
    display->base.type = &displayio_display_type;
    common_hal_displayio_display_construct(display,
        bus,
        160, // Width
        128, // Height
        0, // column start
        0, // row start
        90, // rotation
        16, // Color depth
        false, // Grayscale
        false, // Pixels in a byte share a row. Only used for depth < 8
        1, // bytes per cell. Only valid for depths < 8
        false, // reverse_pixels_in_byte. Only valid for depths < 8
        true, // reverse_pixels_in_word
        MIPI_COMMAND_SET_COLUMN_ADDRESS, // Set column command
        MIPI_COMMAND_SET_PAGE_ADDRESS, // Set row command
        MIPI_COMMAND_WRITE_MEMORY_START, // Write memory command
        0x37, // set vertical scroll command
        display_init_sequence,
        sizeof(display_init_sequence),
        &pin_PB03,
        NO_BRIGHTNESS_COMMAND,
        1.0f, // brightness (ignored)
        false, // auto_brightness
        false, // single_byte_bounds
        false, // data_as_commands
        true, // auto_refresh
        60, // native_frames_per_second
        true, // backlight_on_high
        false); // SH1107_addressing
}

bool board_requests_safe_mode(void) {
    return false;
}

void reset_board(void) {

}