/* * This file is part of the MicroPython project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2020 Dan Halbert for Adafruit Industries * Copyright (c) 2016 Glenn Ruben Bakke * Copyright (c) 2018 Artur Pacholec * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ #include #include #include #include #include "hci.h" #include "py/gc.h" #include "py/mphal.h" #include "py/objstr.h" #include "py/runtime.h" #include "supervisor/shared/safe_mode.h" #include "supervisor/shared/tick.h" #include "supervisor/usb.h" #include "shared-bindings/_bleio/__init__.h" #include "shared-bindings/_bleio/Adapter.h" #include "shared-bindings/_bleio/Address.h" #include "shared-bindings/_bleio/Characteristic.h" #include "shared-bindings/_bleio/Service.h" #include "shared-bindings/_bleio/Connection.h" #include "shared-bindings/_bleio/ScanEntry.h" #include "shared-bindings/time/__init__.h" #define MSEC_TO_UNITS(TIME, RESOLUTION) (((TIME) * 1000) / (RESOLUTION)) #define SEC_TO_UNITS(TIME, RESOLUTION) (((TIME) * 1000000) / (RESOLUTION)) #define UNITS_TO_SEC(TIME, RESOLUTION) (((TIME)*(RESOLUTION)) / 1000000) // 0.625 msecs (625 usecs) #define ADV_INTERVAL_UNIT_FLOAT_SECS (0.000625) // Microseconds is the base unit. The macros above know that. #define UNIT_0_625_MS (625) #define UNIT_1_25_MS (1250) #define UNIT_10_MS (10000) #define MAX_ADVERTISEMENT_SIZE (31) // TODO make this settable from Python. #define DEFAULT_TX_POWER 0 // 0 dBm #define MAX_ANONYMOUS_ADV_TIMEOUT_SECS (60 * 15) #define MAX_LIMITED_DISCOVERABLE_ADV_TIMEOUT_SECS (180) #define BLE_MIN_CONN_INTERVAL MSEC_TO_UNITS(15, UNIT_0_625_MS) #define BLE_MAX_CONN_INTERVAL MSEC_TO_UNITS(15, UNIT_0_625_MS) #define BLE_SLAVE_LATENCY 0 #define BLE_CONN_SUP_TIMEOUT MSEC_TO_UNITS(4000, UNIT_10_MS) bleio_connection_internal_t bleio_connections[BLEIO_TOTAL_CONNECTION_COUNT]; STATIC void add_generic_services(bleio_adapter_obj_t *adapter) { // Create Generic Access UUID, Service, and Characteristics. // Generic Access Service setup. bleio_uuid_obj_t *generic_access_service_uuid = m_new_obj(bleio_uuid_obj_t); generic_access_service_uuid->base.type = &bleio_uuid_type; common_hal_bleio_uuid_construct(generic_access_service_uuid, 0x1800, NULL); bleio_uuid_obj_t *device_name_characteristic_uuid = m_new_obj(bleio_uuid_obj_t); device_name_characteristic_uuid->base.type = &bleio_uuid_type; common_hal_bleio_uuid_construct(device_name_characteristic_uuid, 0x2A00, NULL); bleio_uuid_obj_t *appearance_characteristic_uuid = m_new_obj(bleio_uuid_obj_t); appearance_characteristic_uuid->base.type = &bleio_uuid_type; common_hal_bleio_uuid_construct(appearance_characteristic_uuid, 0x2A01, NULL); // Not implemented: // Peripheral Preferred Connection Parameters // Central Address Resolution bleio_service_obj_t *generic_access_service = m_new_obj(bleio_service_obj_t); generic_access_service->base.type = &bleio_service_type; common_hal_bleio_service_construct(generic_access_service, generic_access_service_uuid, false); adapter->device_name_characteristic = m_new_obj(bleio_characteristic_obj_t); adapter->device_name_characteristic->base.type = &bleio_characteristic_type; char generic_name[] = { 'C', 'I', 'R', 'C', 'U', 'I', 'T', 'P', 'Y', 'n', 'n', 'n', 'n' }; mp_buffer_info_t generic_name_bufinfo = { .buf = generic_name, .len = sizeof(generic_name), }; // Will be added to service by constructor. common_hal_bleio_characteristic_construct( adapter->device_name_characteristic, generic_access_service, BLE_GATT_HANDLE_INVALID, device_name_characteristic_uuid, CHAR_PROP_READ, SECURITY_MODE_OPEN, SECURITY_MODE_NO_ACCESS, 248, // max length, from Bluetooth spec false, // not fixed length &generic_name_bufinfo ); uint16_t zero_16 = 0; mp_buffer_info_t zero_16_value = { .buf = &zero_16, .len = sizeof(zero_16), }; adapter->appearance_characteristic = m_new_obj(bleio_characteristic_obj_t); adapter->appearance_characteristic->base.type = &bleio_characteristic_type; common_hal_bleio_characteristic_construct( adapter->appearance_characteristic, generic_access_service, BLE_GATT_HANDLE_INVALID, appearance_characteristic_uuid, CHAR_PROP_READ, SECURITY_MODE_OPEN, SECURITY_MODE_NO_ACCESS, 2, // max length, from Bluetooth spec true, // fixed length &zero_16_value ); // Generic Attribute Service setup. bleio_uuid_obj_t *generic_attribute_service_uuid = m_new_obj(bleio_uuid_obj_t); generic_attribute_service_uuid->base.type = &bleio_uuid_type; common_hal_bleio_uuid_construct(generic_attribute_service_uuid, 0x1801, NULL); bleio_uuid_obj_t *service_changed_characteristic_uuid = m_new_obj(bleio_uuid_obj_t); service_changed_characteristic_uuid->base.type = &bleio_uuid_type; common_hal_bleio_uuid_construct(service_changed_characteristic_uuid, 0x2A05, NULL); bleio_service_obj_t *generic_attribute_service = m_new_obj(bleio_service_obj_t); generic_attribute_service->base.type = &bleio_service_type; common_hal_bleio_service_construct(generic_attribute_service, generic_attribute_service_uuid, false); adapter->service_changed_characteristic = m_new_obj(bleio_characteristic_obj_t); adapter->service_changed_characteristic->base.type = &bleio_characteristic_type; uint32_t zero_32 = 0; mp_buffer_info_t zero_32_value = { .buf = &zero_32, .len = sizeof(zero_32), }; common_hal_bleio_characteristic_construct( adapter->service_changed_characteristic, generic_attribute_service, BLE_GATT_HANDLE_INVALID, service_changed_characteristic_uuid, CHAR_PROP_INDICATE, SECURITY_MODE_OPEN, SECURITY_MODE_NO_ACCESS, 4, // max length, from Bluetooth spec true, // fixed length &zero_32_value ); } STATIC void check_enabled(bleio_adapter_obj_t *adapter) { if (!common_hal_bleio_adapter_get_enabled(adapter)) { mp_raise_bleio_BluetoothError(translate("Adapter not enabled")); } } // STATIC bool adapter_on_ble_evt(ble_evt_t *ble_evt, void *self_in) { // bleio_adapter_obj_t *self = (bleio_adapter_obj_t*)self_in; // // For debugging. // // mp_printf(&mp_plat_print, "Adapter event: 0x%04x\n", ble_evt->header.evt_id); // switch (ble_evt->header.evt_id) { // case BLE_GAP_EVT_CONNECTED: { // // Find an empty connection. One must always be available because the SD has the same // // total connection limit. // bleio_connection_internal_t *connection; // for (size_t i = 0; i < BLEIO_TOTAL_CONNECTION_COUNT; i++) { // connection = &bleio_connections[i]; // if (connection->conn_handle == BLE_CONN_HANDLE_INVALID) { // break; // } // } // // Central has connected. // ble_gap_evt_connected_t* connected = &ble_evt->evt.gap_evt.params.connected; // connection->conn_handle = ble_evt->evt.gap_evt.conn_handle; // connection->connection_obj = mp_const_none; // connection->pair_status = PAIR_NOT_PAIRED; // connection->mtu = 0; // ble_drv_add_event_handler_entry(&connection->handler_entry, connection_on_ble_evt, connection); // self->connection_objs = NULL; // // Save the current connection parameters. // memcpy(&connection->conn_params, &connected->conn_params, sizeof(ble_gap_conn_params_t)); // #if CIRCUITPY_VERBOSE_BLE // ble_gap_conn_params_t *cp = &connected->conn_params; // mp_printf(&mp_plat_print, "conn params: min_ci %d max_ci %d s_l %d sup_timeout %d\n", cp->min_conn_interval, cp->max_conn_interval, cp->slave_latency, cp->conn_sup_timeout); // #endif // // See if connection interval set by Central is out of range. // // If so, negotiate our preferred range. // ble_gap_conn_params_t conn_params; // sd_ble_gap_ppcp_get(&conn_params); // if (conn_params.min_conn_interval < connected->conn_params.min_conn_interval || // conn_params.min_conn_interval > connected->conn_params.max_conn_interval) { // sd_ble_gap_conn_param_update(ble_evt->evt.gap_evt.conn_handle, &conn_params); // } // self->current_advertising_data = NULL; // break; // } // case BLE_GAP_EVT_DISCONNECTED: { // // Find the connection that was disconnected. // bleio_connection_internal_t *connection; // for (size_t i = 0; i < BLEIO_TOTAL_CONNECTION_COUNT; i++) { // connection = &bleio_connections[i]; // if (connection->conn_handle == ble_evt->evt.gap_evt.conn_handle) { // break; // } // } // ble_drv_remove_event_handler(connection_on_ble_evt, connection); // connection->conn_handle = BLE_CONN_HANDLE_INVALID; // connection->pair_status = PAIR_NOT_PAIRED; // if (connection->connection_obj != mp_const_none) { // bleio_connection_obj_t* obj = connection->connection_obj; // obj->connection = NULL; // obj->disconnect_reason = ble_evt->evt.gap_evt.params.disconnected.reason; // } // self->connection_objs = NULL; // break; // } // case BLE_GAP_EVT_ADV_SET_TERMINATED: // self->current_advertising_data = NULL; // break; // default: // // For debugging. // // mp_printf(&mp_plat_print, "Unhandled adapter event: 0x%04x\n", ble_evt->header.evt_id); // return false; // break; // } // return true; // } char default_ble_name[] = { 'C', 'I', 'R', 'C', 'U', 'I', 'T', 'P', 'Y', 0, 0, 0, 0}; // Get various values and limits set by the adapter. // Set event mask. STATIC void bleio_adapter_hci_init(bleio_adapter_obj_t *self) { const size_t len = sizeof(default_ble_name); bt_addr_t addr; hci_check_error(hci_read_bd_addr(&addr)); default_ble_name[len - 4] = nibble_to_hex_lower[addr.val[1] >> 4 & 0xf]; default_ble_name[len - 3] = nibble_to_hex_lower[addr.val[1] & 0xf]; default_ble_name[len - 2] = nibble_to_hex_lower[addr.val[0] >> 4 & 0xf]; default_ble_name[len - 1] = nibble_to_hex_lower[addr.val[0] & 0xf]; self->name = mp_obj_new_str(default_ble_name, len); // Get version information. if (hci_read_local_version(&self->hci_version, &self->hci_revision, &self->lmp_version, &self->manufacturer, &self->lmp_subversion) != HCI_OK) { mp_raise_bleio_BluetoothError(translate("Could not read HCI version")); } // Get supported features. if (hci_le_read_local_supported_features(self->features) != HCI_OK) { mp_raise_bleio_BluetoothError(translate("Could not read BLE features")); } // Enabled desired events. // Most importantly, includes: // BT_EVT_MASK_LE_META_EVENT BT_EVT_BIT(61) if (hci_set_event_mask(0x3FFFFFFFFFFFFFFF) != HCI_OK) { mp_raise_bleio_BluetoothError(translate("Could not set event mask")); } // The default events for LE are: // BT_EVT_MASK_LE_CONN_COMPLETE, BT_EVT_MASK_LE_ADVERTISING_REPORT, // BT_EVT_MASK_LE_CONN_UPDATE_COMPLETE, BT_EVT_MASK_LE_REMOTE_FEAT_COMPLETE // BT_EVT_MASK_LE_LTK_REQUEST. // That's all we need right now, so we don't bother to set the LE event mask. // Get ACL buffer info. uint16_t le_max_len; uint8_t le_max_num; if (hci_le_read_buffer_size(&le_max_len, &le_max_num) == HCI_OK) { self->max_acl_buffer_len = le_max_len; self->max_acl_num_buffers = le_max_num; } else { // LE Read Buffer Size not available; use the general Read Buffer Size. uint16_t acl_max_len; uint8_t sco_max_len; uint16_t acl_max_num; uint16_t sco_max_num; if (hci_read_buffer_size(&acl_max_len, &sco_max_len, &acl_max_num, &sco_max_num) != HCI_OK) { mp_raise_bleio_BluetoothError(translate("Could not read BLE buffer info")); } self->max_acl_buffer_len = acl_max_len; self->max_acl_num_buffers = acl_max_num; } // Get max advertising length if extended advertising is supported. if (BT_FEAT_LE_EXT_ADV(self->features)) { uint16_t max_adv_data_len; if (hci_le_read_maximum_advertising_data_length(&max_adv_data_len) != HCI_OK) { mp_raise_bleio_BluetoothError(translate("Could not get max advertising length")); } self->max_adv_data_len = max_adv_data_len; } else { self->max_adv_data_len = MAX_ADVERTISEMENT_SIZE; } } void common_hal_bleio_adapter_construct_hci_uart(bleio_adapter_obj_t *self, busio_uart_obj_t *uart, digitalio_digitalinout_obj_t *rts, digitalio_digitalinout_obj_t *cts) { self->allocated = true; self->hci_uart = uart; self->rts_digitalinout = rts; self->cts_digitalinout = cts; // Advertising-related fields are initialized by common_hal_bleio_adapter_set_enabled(). self->enabled = false; common_hal_bleio_adapter_set_enabled(self, true); bleio_adapter_hci_init(self); common_hal_bleio_adapter_set_name(self, default_ble_name); } void common_hal_bleio_adapter_set_enabled(bleio_adapter_obj_t *self, bool enabled) { const bool is_enabled = common_hal_bleio_adapter_get_enabled(self); // Don't enable or disable twice if (is_enabled == enabled) { return; } self->enabled = enabled; // We must poll for input from the HCI adapter. // TODO Can we instead trigger an interrupt on UART input traffic? if (enabled) { supervisor_enable_tick(); } else { supervisor_disable_tick(); } // Enabling or disabling: stop any current activity; reset to known state. hci_reset(); self->now_advertising = false; self->extended_advertising = false; self->circuitpython_advertising = false; self->advertising_timeout_msecs = 0; if (enabled) { // Reset list of known attributes. // Indices into the list are handles. Handle 0x0000 designates an invalid handle, // so store None there to skip it. self->attributes = mp_obj_new_list(0, NULL); bleio_adapter_add_attribute(self, mp_const_none); add_generic_services(self); } } bool common_hal_bleio_adapter_get_enabled(bleio_adapter_obj_t *self) { return self->enabled; } bleio_address_obj_t *common_hal_bleio_adapter_get_address(bleio_adapter_obj_t *self) { check_enabled(self); bt_addr_t addr; hci_check_error(hci_read_bd_addr(&addr)); bleio_address_obj_t *address = m_new_obj(bleio_address_obj_t); address->base.type = &bleio_address_type; common_hal_bleio_address_construct(address, addr.val, BT_ADDR_LE_PUBLIC); return address; } bool common_hal_bleio_adapter_set_address(bleio_adapter_obj_t *self, bleio_address_obj_t *address) { mp_buffer_info_t bufinfo; if (!mp_get_buffer(address->bytes, &bufinfo, MP_BUFFER_READ)) { return false; } return hci_le_set_random_address(bufinfo.buf) == HCI_OK; } mp_obj_str_t *common_hal_bleio_adapter_get_name(bleio_adapter_obj_t *self) { return self->name; } void common_hal_bleio_adapter_set_name(bleio_adapter_obj_t *self, const char *name) { self->name = mp_obj_new_str(name, strlen(name)); mp_buffer_info_t bufinfo; mp_get_buffer_raise(self->name, &bufinfo, MP_BUFFER_READ); bleio_characteristic_set_local_value(self->device_name_characteristic, &bufinfo); } // STATIC bool scan_on_ble_evt(ble_evt_t *ble_evt, void *scan_results_in) { // bleio_scanresults_obj_t *scan_results = (bleio_scanresults_obj_t*)scan_results_in; // if (ble_evt->header.evt_id == BLE_GAP_EVT_TIMEOUT && // ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_SCAN) { // shared_module_bleio_scanresults_set_done(scan_results, true); // ble_drv_remove_event_handler(scan_on_ble_evt, scan_results); // return true; // } // if (ble_evt->header.evt_id != BLE_GAP_EVT_ADV_REPORT) { // return false; // } // ble_gap_evt_adv_report_t *report = &ble_evt->evt.gap_evt.params.adv_report; // shared_module_bleio_scanresults_append(scan_results, // supervisor_ticks_ms64(), // report->type.connectable, // report->type.scan_response, // report->rssi, // report->peer_addr.addr, // report->peer_addr.addr_type, // report->data.p_data, // report->data.len); // const uint32_t err_code = sd_ble_gap_scan_start(NULL, scan_results->common_hal_data); // if (err_code != NRF_SUCCESS) { // // TODO: Pass the error into the scan results so it can throw an exception. // scan_results->done = true; // } // return true; // } mp_obj_t common_hal_bleio_adapter_start_scan(bleio_adapter_obj_t *self, uint8_t *prefixes, size_t prefix_length, bool extended, mp_int_t buffer_size, mp_float_t timeout, mp_float_t interval, mp_float_t window, mp_int_t minimum_rssi, bool active) { // TODO mp_raise_NotImplementedError(NULL); check_enabled(self); if (self->scan_results != NULL) { if (!shared_module_bleio_scanresults_get_done(self->scan_results)) { mp_raise_bleio_BluetoothError(translate("Scan already in progess. Stop with stop_scan.")); } self->scan_results = NULL; } self->scan_results = shared_module_bleio_new_scanresults(buffer_size, prefixes, prefix_length, minimum_rssi); // size_t max_packet_size = extended ? BLE_GAP_SCAN_BUFFER_EXTENDED_MAX_SUPPORTED : BLE_GAP_SCAN_BUFFER_MAX; // uint8_t *raw_data = m_malloc(sizeof(ble_data_t) + max_packet_size, false); // ble_data_t * sd_data = (ble_data_t *) raw_data; // self->scan_results->common_hal_data = sd_data; // sd_data->len = max_packet_size; // sd_data->p_data = raw_data + sizeof(ble_data_t); // ble_drv_add_event_handler(scan_on_ble_evt, self->scan_results); // uint32_t nrf_timeout = SEC_TO_UNITS(timeout, UNIT_10_MS); // if (timeout <= 0.0001) { // nrf_timeout = BLE_GAP_SCAN_TIMEOUT_UNLIMITED; // } // ble_gap_scan_params_t scan_params = { // .extended = extended, // .interval = SEC_TO_UNITS(interval, UNIT_0_625_MS), // .timeout = nrf_timeout, // .window = SEC_TO_UNITS(window, UNIT_0_625_MS), // .scan_phys = BLE_GAP_PHY_1MBPS, // .active = active // }; // uint32_t err_code; // vm_used_ble = true; // err_code = sd_ble_gap_scan_start(&scan_params, sd_data); // if (err_code != NRF_SUCCESS) { // self->scan_results = NULL; // ble_drv_remove_event_handler(scan_on_ble_evt, self->scan_results); // check_nrf_error(err_code); // } return MP_OBJ_FROM_PTR(self->scan_results); } void common_hal_bleio_adapter_stop_scan(bleio_adapter_obj_t *self) { // TODO mp_raise_NotImplementedError(NULL); check_enabled(self); // If not already scanning, no problem. if (hci_le_set_scan_enable(BT_HCI_LE_SCAN_DISABLE, BT_HCI_LE_SCAN_FILTER_DUP_DISABLE) == HCI_OK) { shared_module_bleio_scanresults_set_done(self->scan_results, true); self->scan_results = NULL; } } // typedef struct { // uint16_t conn_handle; // volatile bool done; // } connect_info_t; // STATIC bool connect_on_ble_evt(ble_evt_t *ble_evt, void *info_in) { // connect_info_t *info = (connect_info_t*)info_in; // switch (ble_evt->header.evt_id) { // case BLE_GAP_EVT_CONNECTED: // info->conn_handle = ble_evt->evt.gap_evt.conn_handle; // info->done = true; // break; // case BLE_GAP_EVT_TIMEOUT: // // Handle will be invalid. // info->done = true; // break; // default: // // For debugging. // // mp_printf(&mp_plat_print, "Unhandled central event: 0x%04x\n", ble_evt->header.evt_id); // return false; // break; // } // return true; // } mp_obj_t common_hal_bleio_adapter_connect(bleio_adapter_obj_t *self, bleio_address_obj_t *address, mp_float_t timeout) { // TODO mp_raise_NotImplementedError(NULL); check_enabled(self); // ble_gap_addr_t addr; // addr.addr_type = address->type; // mp_buffer_info_t address_buf_info; // mp_get_buffer_raise(address->bytes, &address_buf_info, MP_BUFFER_READ); // memcpy(addr.addr, (uint8_t *) address_buf_info.buf, NUM_BLEIO_ADDRESS_BYTES); // ble_gap_scan_params_t scan_params = { // .interval = MSEC_TO_UNITS(100, UNIT_0_625_MS), // .window = MSEC_TO_UNITS(100, UNIT_0_625_MS), // .scan_phys = BLE_GAP_PHY_1MBPS, // // timeout of 0 means no timeout // .timeout = SEC_TO_UNITS(timeout, UNIT_10_MS), // }; // ble_gap_conn_params_t conn_params = { // .conn_sup_timeout = MSEC_TO_UNITS(4000, UNIT_10_MS), // .min_conn_interval = MSEC_TO_UNITS(15, UNIT_1_25_MS), // .max_conn_interval = MSEC_TO_UNITS(300, UNIT_1_25_MS), // .slave_latency = 0, // number of conn events // }; // connect_info_t event_info; // ble_drv_add_event_handler(connect_on_ble_evt, &event_info); // event_info.done = false; vm_used_ble = true; // uint32_t err_code = sd_ble_gap_connect(&addr, &scan_params, &conn_params, BLE_CONN_CFG_TAG_CUSTOM); // if (err_code != NRF_SUCCESS) { // ble_drv_remove_event_handler(connect_on_ble_evt, &event_info); // check_nrf_error(err_code); // } // while (!event_info.done) { // RUN_BACKGROUND_TASKS; // } // ble_drv_remove_event_handler(connect_on_ble_evt, &event_info); // uint16_t conn_handle = event_info.conn_handle; // if (conn_handle == BLE_CONN_HANDLE_INVALID) { // mp_raise_bleio_BluetoothError(translate("Failed to connect: timeout")); // } // // Negotiate for better PHY, larger MTU and data lengths since we are the central. These are // // nice-to-haves so ignore any errors. // ble_gap_phys_t const phys = { // .rx_phys = BLE_GAP_PHY_AUTO, // .tx_phys = BLE_GAP_PHY_AUTO, // }; // sd_ble_gap_phy_update(conn_handle, &phys); // sd_ble_gattc_exchange_mtu_request(conn_handle, BLE_GATTS_VAR_ATTR_LEN_MAX); // sd_ble_gap_data_length_update(conn_handle, NULL, NULL); // Make the connection object and return it. // for (size_t i = 0; i < BLEIO_TOTAL_CONNECTION_COUNT; i++) { // bleio_connection_internal_t *connection = &bleio_connections[i]; // if (connection->conn_handle == conn_handle) { // return bleio_connection_new_from_internal(connection); // } // } mp_raise_bleio_BluetoothError(translate("Failed to connect: internal error")); return mp_const_none; } STATIC void check_data_fit(size_t data_len, bool connectable) { if (data_len > MAX_ADVERTISEMENT_SIZE) { mp_raise_ValueError(translate("Data too large for advertisement packet")); } } // STATIC bool advertising_on_ble_evt(ble_evt_t *ble_evt, void *self_in) { // bleio_adapter_obj_t *self = (bleio_adapter_obj_t*)self_in; // switch (ble_evt->header.evt_id) { // case BLE_GAP_EVT_ADV_SET_TERMINATED: // common_hal_bleio_adapter_stop_advertising(self); // ble_drv_remove_event_handler(advertising_on_ble_evt, self_in); // break; // default: // // For debugging. // // mp_printf(&mp_plat_print, "Unhandled advertising event: 0x%04x\n", ble_evt->header.evt_id); // return false; // break; // } // return true; // } uint32_t _common_hal_bleio_adapter_start_advertising(bleio_adapter_obj_t *self, bool connectable, bool anonymous, uint32_t timeout, float interval, uint8_t *advertising_data, uint16_t advertising_data_len, uint8_t *scan_response_data, uint16_t scan_response_data_len) { check_enabled(self); if (self->now_advertising) { if (self->circuitpython_advertising) { common_hal_bleio_adapter_stop_advertising(self); } else { // User-requested advertising. // TODO allow multiple advertisements. // Already advertising. Can't advertise twice. return 1; } } // Peer address, which we don't use (no directed advertising). bt_addr_le_t empty_addr = { 0 }; bool extended = advertising_data_len > self->max_adv_data_len || scan_response_data_len > self->max_adv_data_len; if (extended) { if (!BT_FEAT_LE_EXT_ADV(self->features)) { mp_raise_bleio_BluetoothError(translate("Data length needs extended advertising, but this adapter does not support it")); } uint16_t props = 0; if (connectable) { props |= BT_HCI_LE_ADV_PROP_CONN; } if (scan_response_data_len > 0) { props |= BT_HCI_LE_ADV_PROP_SCAN; } // Advertising interval. uint32_t interval_units = SEC_TO_UNITS(interval, UNIT_0_625_MS); hci_check_error( hci_le_set_extended_advertising_parameters( 0, // handle props, // adv properties interval_units, // min interval interval_units, // max interval 0b111, // channel map: channels 37, 38, 39 anonymous ? BT_ADDR_LE_RANDOM : BT_ADDR_LE_PUBLIC, &empty_addr, // peer_addr, 0x00, // filter policy: no filter DEFAULT_TX_POWER, BT_HCI_LE_EXT_SCAN_PHY_1M, // Secondary PHY to use 0x00, // AUX_ADV_IND shall be sent prior to next adv event BT_HCI_LE_EXT_SCAN_PHY_1M, // Secondary PHY to use 0x00, // Advertising SID 0x00 // Scan req notify disable )); // We can use the duration mechanism provided, instead of our own. self->advertising_timeout_msecs = 0; uint8_t handle[1] = { 0 }; uint16_t duration_10msec[1] = { timeout * 100 }; uint8_t max_ext_adv_evts[1] = { 0 }; hci_check_error( hci_le_set_extended_advertising_enable( BT_HCI_LE_ADV_ENABLE, 1, // one advertising set. handle, duration_10msec, max_ext_adv_evts )); self->extended_advertising = true; } else { // Legacy advertising (not extended). uint8_t adv_type; if (connectable) { // Connectable, scannable, undirected. adv_type = BT_HCI_ADV_IND; } else if (scan_response_data_len > 0) { // Unconnectable, scannable, undirected. adv_type = BT_HCI_ADV_SCAN_IND; } else { // Unconnectable, unscannable, undirected. adv_type = BT_HCI_ADV_NONCONN_IND; } // Advertising interval. uint16_t interval_units = SEC_TO_UNITS(interval, UNIT_0_625_MS); hci_check_error( hci_le_set_advertising_parameters( interval_units, // min interval interval_units, // max interval adv_type, anonymous ? BT_ADDR_LE_RANDOM : BT_ADDR_LE_PUBLIC, &empty_addr, 0b111, // channel map: channels 37, 38, 39 0x00 // filter policy: no filter )); // The HCI commands expect MAX_ADVERTISEMENT_SIZE (31)octets, // even though the actual data length may be shorter. uint8_t full_data[MAX_ADVERTISEMENT_SIZE] = { 0 }; memcpy(full_data, advertising_data, MIN(sizeof(full_data), advertising_data_len)); hci_check_error(hci_le_set_advertising_data(advertising_data_len, full_data)); memset(full_data, 0, sizeof(full_data)); if (scan_response_data_len > 0) { memcpy(full_data, scan_response_data, MIN(sizeof(full_data), scan_response_data_len)); hci_check_error(hci_le_set_scan_response_data(scan_response_data_len, full_data)); } // No duration mechanism is provided for legacy advertising, so we need to do our own. self->advertising_timeout_msecs = timeout * 1000; self->advertising_start_ticks = supervisor_ticks_ms64(); // Start advertising. hci_check_error(hci_le_set_advertising_enable(BT_HCI_LE_ADV_ENABLE)); self->extended_advertising = false; } // end legacy advertising setup vm_used_ble = true; self->now_advertising = true; return 0; } void common_hal_bleio_adapter_start_advertising(bleio_adapter_obj_t *self, bool connectable, bool anonymous, uint32_t timeout, mp_float_t interval, mp_buffer_info_t *advertising_data_bufinfo, mp_buffer_info_t *scan_response_data_bufinfo) { check_enabled(self); // interval value has already been validated. check_data_fit(advertising_data_bufinfo->len, connectable); check_data_fit(scan_response_data_bufinfo->len, connectable); if (advertising_data_bufinfo->len > MAX_ADVERTISEMENT_SIZE && scan_response_data_bufinfo->len > 0) { mp_raise_bleio_BluetoothError(translate("Extended advertisements with scan response not supported.")); } // Anonymous mode requires a timeout so that we don't continue to broadcast // the same data while cycling the MAC address -- otherwise, what's the // point of randomizing the MAC address? if (timeout == 0 && anonymous) { timeout = MAX_ANONYMOUS_ADV_TIMEOUT_SECS; } else { if (timeout > MAX_LIMITED_DISCOVERABLE_ADV_TIMEOUT_SECS) { mp_raise_bleio_BluetoothError(translate("Timeout is too long: Maximum timeout length is %d seconds"), MAX_LIMITED_DISCOVERABLE_ADV_TIMEOUT_SECS); } } const uint32_t result = _common_hal_bleio_adapter_start_advertising( self, connectable, anonymous, timeout, interval, advertising_data_bufinfo->buf, advertising_data_bufinfo->len, scan_response_data_bufinfo->buf, scan_response_data_bufinfo->len); if (result) { mp_raise_bleio_BluetoothError(translate("Already advertising")); } self->circuitpython_advertising = false; } void common_hal_bleio_adapter_stop_advertising(bleio_adapter_obj_t *self) { check_enabled(self); self->now_advertising = false; self->extended_advertising = false; self->circuitpython_advertising = false; int result = hci_le_set_advertising_enable(BT_HCI_LE_ADV_DISABLE); // OK if we're already stopped. There seems to be an ESP32 HCI bug: // If advertising is already off, then LE_SET_ADV_ENABLE does not return a response. if (result != HCI_RESPONSE_TIMEOUT) { hci_check_error(result); } // TODO startup CircuitPython advertising again. } // Note that something stopped advertising, such as a connection happening. // Don't ask the adapter to stop. void bleio_adapter_advertising_was_stopped(bleio_adapter_obj_t *self) { self->now_advertising = false; self->extended_advertising = false; self->circuitpython_advertising = false; } bool common_hal_bleio_adapter_get_advertising(bleio_adapter_obj_t *self) { check_enabled(self); return self->now_advertising; } bool common_hal_bleio_adapter_get_connected(bleio_adapter_obj_t *self) { check_enabled(self); for (size_t i = 0; i < BLEIO_TOTAL_CONNECTION_COUNT; i++) { bleio_connection_internal_t *connection = &bleio_connections[i]; if (connection->conn_handle != BLE_CONN_HANDLE_INVALID) { return true; } } return false; } mp_obj_t common_hal_bleio_adapter_get_connections(bleio_adapter_obj_t *self) { check_enabled(self); if (self->connection_objs != NULL) { return self->connection_objs; } size_t total_connected = 0; mp_obj_t items[BLEIO_TOTAL_CONNECTION_COUNT]; for (size_t i = 0; i < BLEIO_TOTAL_CONNECTION_COUNT; i++) { bleio_connection_internal_t *connection = &bleio_connections[i]; if (connection->conn_handle != BLE_CONN_HANDLE_INVALID) { if (connection->connection_obj == mp_const_none) { connection->connection_obj = bleio_connection_new_from_internal(connection); } items[total_connected] = connection->connection_obj; total_connected++; } } self->connection_objs = mp_obj_new_tuple(total_connected, items); return self->connection_objs; } void common_hal_bleio_adapter_erase_bonding(bleio_adapter_obj_t *self) { // TODO mp_raise_NotImplementedError(NULL); check_enabled(self); // FIX bonding_erase_storage(); } uint16_t bleio_adapter_add_attribute(bleio_adapter_obj_t *adapter, mp_obj_t *attribute) { check_enabled(adapter); // The handle is the index of this attribute in the attributes list. uint16_t handle = (uint16_t)adapter->attributes->len; mp_obj_list_append(adapter->attributes, attribute); if (MP_OBJ_IS_TYPE(attribute, &bleio_service_type)) { adapter->last_added_service_handle = handle; } if (MP_OBJ_IS_TYPE(attribute, &bleio_characteristic_type)) { adapter->last_added_characteristic_handle = handle; } return handle; } mp_obj_t *bleio_adapter_get_attribute(bleio_adapter_obj_t *adapter, uint16_t handle) { check_enabled(adapter); if (handle == 0 || handle >= adapter->attributes->len) { return mp_const_none; } return adapter->attributes->items[handle]; } uint16_t bleio_adapter_max_attribute_handle(bleio_adapter_obj_t *adapter) { check_enabled(adapter); return adapter->attributes->len - 1; } void bleio_adapter_gc_collect(bleio_adapter_obj_t *adapter) { gc_collect_root((void **)adapter, sizeof(bleio_adapter_obj_t) / sizeof(size_t)); gc_collect_root((void **)bleio_connections, sizeof(bleio_connections) / sizeof(size_t)); } void bleio_adapter_reset(bleio_adapter_obj_t *adapter) { if (!common_hal_bleio_adapter_get_enabled(adapter)) { return; } // Adapter will be reset. common_hal_bleio_adapter_set_enabled(adapter, false); adapter->connection_objs = NULL; for (size_t i = 0; i < BLEIO_TOTAL_CONNECTION_COUNT; i++) { bleio_connection_internal_t *connection = &bleio_connections[i]; // Disconnect all connections with Python state cleanly. Keep any supervisor-only connections. if (connection->connection_obj != mp_const_none && connection->conn_handle != BLE_CONN_HANDLE_INVALID) { common_hal_bleio_connection_disconnect(connection); } connection->connection_obj = mp_const_none; } } void bleio_adapter_background(bleio_adapter_obj_t *adapter) { if (!common_hal_bleio_adapter_get_enabled(adapter)) { return; } if (adapter->advertising_timeout_msecs > 0 && supervisor_ticks_ms64() - adapter->advertising_start_ticks > adapter->advertising_timeout_msecs) { adapter->advertising_timeout_msecs = 0; common_hal_bleio_adapter_stop_advertising(adapter); } hci_result_t result = hci_poll_for_incoming_pkt(); if (result != HCI_OK) { mp_printf(&mp_plat_print, "bad hci_poll_for_incoming_pkt() result in background: %d\n", result); } }