# SOME DESCRIPTIVE TITLE. # Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER # This file is distributed under the same license as the PACKAGE package. # FIRST AUTHOR , YEAR. # msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2020-05-19 15:01+0800\n" "PO-Revision-Date: 2020-05-19 17:08+0000\n" "Last-Translator: Dustin Watts \n" "Language-Team: none\n" "Language: nl\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=n != 1;\n" "X-Generator: Weblate 4.1-dev\n" #: main.c msgid "" "\n" "Code done running. Waiting for reload.\n" msgstr "" "\n" "Code is uitgevoerd. Wachten op herladen.\n" #: supervisor/shared/safe_mode.c msgid "" "\n" "Please file an issue with the contents of your CIRCUITPY drive at \n" "https://github.com/adafruit/circuitpython/issues\n" msgstr "" "\n" "Meld een probleem met de inhoud van de CIRCUITPY drive op:\n" "https://github.com/adafruit/circuitpython/issues\n" #: supervisor/shared/safe_mode.c msgid "" "\n" "To exit, please reset the board without " msgstr "" "\n" "Om te verlatten, herstart de module zonder " #: py/obj.c msgid " File \"%q\"" msgstr " Bestand" #: py/obj.c msgid " File \"%q\", line %d" msgstr " Bestand \"%q\", regel %d" #: main.c msgid " output:\n" msgstr " output\n" #: py/objstr.c #, c-format msgid "%%c requires int or char" msgstr "%%c vereist een int of char" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "%d address pins and %d rgb pins indicate a height of %d, not %d" msgstr "%d adres pins en %d RGB pins geven een hoogte van %d aan, niet %d" #: shared-bindings/microcontroller/Pin.c msgid "%q in use" msgstr "%q in gebruik" #: py/obj.c msgid "%q index out of range" msgstr "%q index buiten bereik" #: py/obj.c msgid "%q indices must be integers, not %s" msgstr "%q indexen moeten integers zijn, niet %s" #: shared-bindings/vectorio/Polygon.c msgid "%q list must be a list" msgstr "%q lijst moet een lijst zijn" #: shared-bindings/_bleio/CharacteristicBuffer.c #: shared-bindings/_bleio/PacketBuffer.c shared-bindings/displayio/Group.c #: shared-bindings/displayio/Shape.c shared-bindings/vectorio/Circle.c #: shared-bindings/vectorio/Rectangle.c msgid "%q must be >= 1" msgstr "%q moet >= 1 zijn" #: shared-module/vectorio/Polygon.c msgid "%q must be a tuple of length 2" msgstr "%q moet een tuple van lengte 2 zijn" #: shared-bindings/fontio/BuiltinFont.c msgid "%q should be an int" msgstr "%q moet een int zijn" #: py/bc.c py/objnamedtuple.c msgid "%q() takes %d positional arguments but %d were given" msgstr "%q() verwacht %d positionele argumenten maar kreeg %d" #: py/argcheck.c msgid "'%q' argument required" msgstr "'%q' argument vereist" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects a label" msgstr "'%s' verwacht een label" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects a register" msgstr "'%s' verwacht een register" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects a special register" msgstr "'%s' verwacht een speciaal register" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects an FPU register" msgstr "'%s' verwacht een FPU register" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects an address of the form [a, b]" msgstr "'%s' verwacht een adres in de vorm [a, b]" #: py/emitinlinethumb.c py/emitinlinextensa.c #, c-format msgid "'%s' expects an integer" msgstr "'%s' verwacht een integer" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects at most r%d" msgstr "'%s' verwacht op zijn meest r%d" #: py/emitinlinethumb.c #, c-format msgid "'%s' expects {r0, r1, ...}" msgstr "'%s' verwacht {r0, r1, ...}" #: py/emitinlinextensa.c #, c-format msgid "'%s' integer %d is not within range %d..%d" msgstr "'%s' integer %d is niet in bereik %d..%d" #: py/emitinlinethumb.c #, c-format msgid "'%s' integer 0x%x does not fit in mask 0x%x" msgstr "'%s' integer 0x%x past niet in mask 0x%x" #: py/runtime.c msgid "'%s' object cannot assign attribute '%q'" msgstr "'%s' object kan niet aan attribuut '%q' toewijzen" #: py/proto.c msgid "'%s' object does not support '%q'" msgstr "'%s' object ondersteunt '%q' niet" #: py/obj.c #, c-format msgid "'%s' object does not support item assignment" msgstr "'%s' object ondersteunt item toewijzing niet" #: py/obj.c #, c-format msgid "'%s' object does not support item deletion" msgstr "'%s' object ondersteunt item verwijdering niet" #: py/runtime.c msgid "'%s' object has no attribute '%q'" msgstr "'%s' object heeft geen attribuut '%q'" #: py/runtime.c #, c-format msgid "'%s' object is not an iterator" msgstr "'%s' object is geen iterator" #: py/objtype.c py/runtime.c #, c-format msgid "'%s' object is not callable" msgstr "'%s' object is niet aanroepbaar" #: py/runtime.c #, c-format msgid "'%s' object is not iterable" msgstr "'%s' object is niet itereerbaar" #: py/obj.c #, c-format msgid "'%s' object is not subscriptable" msgstr "'%s' object is niet onderschrijfbaar" #: py/objstr.c msgid "'=' alignment not allowed in string format specifier" msgstr "'=' uitlijning niet toegestaan in string format specifier" #: shared-module/struct/__init__.c msgid "'S' and 'O' are not supported format types" msgstr "'S' and 'O' zijn niet ondersteunde format types" #: py/compile.c msgid "'align' requires 1 argument" msgstr "'align' vereist 1 argument" #: py/compile.c msgid "'async for' or 'async with' outside async function" msgstr "'async for' of 'async with' buiten async functie" #: py/compile.c msgid "'await' outside function" msgstr "'await' buiten de functie" #: py/compile.c msgid "'break' outside loop" msgstr "'break' buiten de loop" #: py/compile.c msgid "'continue' outside loop" msgstr "'continue' buiten de loop" #: py/compile.c msgid "'data' requires at least 2 arguments" msgstr "'data' vereist op zijn minst 2 argumenten" #: py/compile.c msgid "'data' requires integer arguments" msgstr "'data' vereist integer argumenten" #: py/compile.c msgid "'label' requires 1 argument" msgstr "'label' vereist 1 argument" #: py/compile.c msgid "'return' outside function" msgstr "'return' buiten de functie" #: py/compile.c msgid "'yield' outside function" msgstr "'yield' buiten de functie" #: py/compile.c msgid "*x must be assignment target" msgstr "*x moet een assignment target zijn" #: py/obj.c msgid ", in %q\n" msgstr ", in %q\n" #: py/objcomplex.c msgid "0.0 to a complex power" msgstr "0.0 tot een complexe macht" #: py/modbuiltins.c msgid "3-arg pow() not supported" msgstr "3-arg pow() niet ondersteund" #: ports/atmel-samd/common-hal/countio/Counter.c #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c msgid "A hardware interrupt channel is already in use" msgstr "Een hardware interrupt kanaal is al in gebruik" #: shared-bindings/_bleio/Address.c #, c-format msgid "Address must be %d bytes long" msgstr "Adres moet %d bytes lang zijn" #: shared-bindings/_bleio/Address.c msgid "Address type out of range" msgstr "Adres type buiten bereik" #: ports/nrf/common-hal/busio/I2C.c msgid "All I2C peripherals are in use" msgstr "Alle I2C peripherals zijn in gebruik" #: ports/nrf/common-hal/busio/SPI.c msgid "All SPI peripherals are in use" msgstr "Alle SPI peripherals zijn in gebruik" #: ports/nrf/common-hal/busio/UART.c msgid "All UART peripherals are in use" msgstr "Alle UART peripherals zijn in gebruik" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "All event channels in use" msgstr "Alle event kanalen zijn in gebruik" #: ports/atmel-samd/audio_dma.c ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "All sync event channels in use" msgstr "Alle sync event kanalen zijn in gebruik" #: shared-bindings/pulseio/PWMOut.c msgid "All timers for this pin are in use" msgstr "Alle timers voor deze pin zijn in gebruik" #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #: ports/nrf/common-hal/pulseio/PulseIn.c ports/nrf/peripherals/nrf/timers.c #: shared-bindings/pulseio/PWMOut.c shared-module/_pew/PewPew.c msgid "All timers in use" msgstr "Alle timers zijn in gebruik" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Already advertising." msgstr "Advertising is al bezig." #: ports/cxd56/common-hal/analogio/AnalogIn.c msgid "AnalogIn not supported on given pin" msgstr "AnalogIn niet ondersteund door gegeven pin" #: ports/cxd56/common-hal/analogio/AnalogOut.c #: ports/mimxrt10xx/common-hal/analogio/AnalogOut.c #: ports/nrf/common-hal/analogio/AnalogOut.c msgid "AnalogOut functionality not supported" msgstr "AnalogOut functionaliteit niet ondersteund" #: shared-bindings/analogio/AnalogOut.c msgid "AnalogOut is only 16 bits. Value must be less than 65536." msgstr "AnalogOut is slechts 16 bits. Waarde moet minder dan 65536 zijn." #: ports/atmel-samd/common-hal/analogio/AnalogOut.c msgid "AnalogOut not supported on given pin" msgstr "AnalogOut niet ondersteund door gegeven pin" #: ports/atmel-samd/common-hal/pulseio/PulseOut.c #: ports/cxd56/common-hal/pulseio/PulseOut.c msgid "Another send is already active" msgstr "Een andere send is al actief" #: shared-bindings/pulseio/PulseOut.c msgid "Array must contain halfwords (type 'H')" msgstr "Array moet halfwords (type 'H') bevatten" #: shared-bindings/nvm/ByteArray.c msgid "Array values should be single bytes." msgstr "Array waardes moet enkele bytes zijn." #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "At most %d %q may be specified (not %d)" msgstr "Op zijn meest %d %q mogen worden gespecificeerd (niet %d)" #: supervisor/shared/safe_mode.c msgid "Attempted heap allocation when MicroPython VM not running." msgstr "heap allocatie geprobeerd terwijl MicroPython VM niet draait." #: main.c msgid "Auto-reload is off.\n" msgstr "Auto-herlaad staat uit.\n" #: main.c msgid "" "Auto-reload is on. Simply save files over USB to run them or enter REPL to " "disable.\n" msgstr "" "Auto-herlaad staat aan. Sla bestanden simpelweg op over USB om uit te voeren " "of start REPL om uit te schakelen.\n" #: shared-module/displayio/Display.c #: shared-module/framebufferio/FramebufferDisplay.c msgid "Below minimum frame rate" msgstr "Onder de minimum frame rate" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Bit clock and word select must share a clock unit" msgstr "Bit clock en word select moeten een clock eenheid delen" #: shared-bindings/audiobusio/PDMIn.c msgid "Bit depth must be multiple of 8." msgstr "Bit diepte moet een meervoud van 8 zijn." #: ports/atmel-samd/common-hal/rotaryio/IncrementalEncoder.c msgid "Both pins must support hardware interrupts" msgstr "Beide pinnen moeten hardware interrupts ondersteunen" #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c #: shared-bindings/rgbmatrix/RGBMatrix.c msgid "Brightness must be 0-1.0" msgstr "Helderheid moet tussen de 0 en 1.0 liggen" #: shared-bindings/supervisor/__init__.c msgid "Brightness must be between 0 and 255" msgstr "Helderheid moet tussen de 0 en 255 liggen" #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Brightness not adjustable" msgstr "Helderheid is niet aanpasbaar" #: shared-bindings/_bleio/UUID.c #, c-format msgid "Buffer + offset too small %d %d %d" msgstr "Buffer + offset te klein %d %d %d" #: shared-module/usb_hid/Device.c #, c-format msgid "Buffer incorrect size. Should be %d bytes." msgstr "Buffer heeft incorrect grootte. Moet %d bytes zijn." #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Buffer is not a bytearray." msgstr "Buffer is geen bytearray." #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Buffer is too small" msgstr "Buffer is te klein" #: ports/nrf/common-hal/audiopwmio/PWMAudioOut.c #, c-format msgid "Buffer length %d too big. It must be less than %d" msgstr "Buffer lengte %d te groot. Het moet kleiner zijn dan %d" #: shared-bindings/bitbangio/I2C.c shared-bindings/busio/I2C.c msgid "Buffer must be at least length 1" msgstr "Buffer moet op zijn minst lengte 1 zijn" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Buffer too large and unable to allocate" msgstr "Buffer is te groot en niet in staat te alloceren" #: shared-bindings/_bleio/PacketBuffer.c #, c-format msgid "Buffer too short by %d bytes" msgstr "Buffer is %d bytes te klein" #: ports/atmel-samd/common-hal/displayio/ParallelBus.c #: ports/nrf/common-hal/displayio/ParallelBus.c #, c-format msgid "Bus pin %d is already in use" msgstr "Bus pin %d al in gebruik" #: shared-bindings/_bleio/UUID.c msgid "Byte buffer must be 16 bytes." msgstr "Byte buffer moet 16 bytes zijn." #: shared-bindings/nvm/ByteArray.c msgid "Bytes must be between 0 and 255." msgstr "Bytes moeten tussen 0 en 255 liggen." #: shared-bindings/aesio/aes.c msgid "CBC blocks must be multiples of 16 bytes" msgstr "CBC blocks moeten meervouden van 16 bytes zijn" #: py/objtype.c msgid "Call super().__init__() before accessing native object." msgstr "Roep super().__init__() aan voor toegang native object." #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "Can't set CCCD on local Characteristic" msgstr "Kan CCCD niet toewijzen aan lokaal Characteristic" #: shared-bindings/displayio/Bitmap.c shared-bindings/pulseio/PulseIn.c msgid "Cannot delete values" msgstr "Kan waardes niet verwijderen" #: ports/atmel-samd/common-hal/digitalio/DigitalInOut.c #: ports/mimxrt10xx/common-hal/digitalio/DigitalInOut.c #: ports/nrf/common-hal/digitalio/DigitalInOut.c msgid "Cannot get pull while in output mode" msgstr "get pull kan niet gedurende output mode" #: ports/nrf/common-hal/microcontroller/Processor.c msgid "Cannot get temperature" msgstr "Kan de temperatuur niet verkrijgen" #: shared-bindings/_bleio/Adapter.c msgid "Cannot have scan responses for extended, connectable advertisements." msgstr "" "Kan geen scan responses voor extended, connectable advertisements hebben." #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Cannot output both channels on the same pin" msgstr "Output van beide kanalen kan niet op dezelfde pin" #: shared-module/bitbangio/SPI.c msgid "Cannot read without MISO pin." msgstr "Kan niet lezen zonder MISO pin." #: shared-bindings/audiobusio/PDMIn.c msgid "Cannot record to a file" msgstr "Kan niet opnemen naar een bestand" #: shared-module/storage/__init__.c msgid "Cannot remount '/' when USB is active." msgstr "Kan '/' niet hermounten als USB actief is." #: ports/atmel-samd/common-hal/microcontroller/__init__.c #: ports/cxd56/common-hal/microcontroller/__init__.c #: ports/mimxrt10xx/common-hal/microcontroller/__init__.c msgid "Cannot reset into bootloader because no bootloader is present." msgstr "" "Kan niet resetten naar bootloader omdat er geen bootloader aanwezig is." #: shared-bindings/digitalio/DigitalInOut.c msgid "Cannot set value when direction is input." msgstr "Kan de waarde niet toewijzen als de richting input is." #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Cannot specify RTS or CTS in RS485 mode" msgstr "Kan RTS of CTS niet specificeren in RS485 modus" #: py/objslice.c msgid "Cannot subclass slice" msgstr "Kan slice niet subclasseren" #: shared-module/bitbangio/SPI.c msgid "Cannot transfer without MOSI and MISO pins." msgstr "Kan niet overdragen zonder MOSI en MISO pinnen." #: extmod/moductypes.c msgid "Cannot unambiguously get sizeof scalar" msgstr "Kan niet ondubbelzinning sizeof scalar verkrijgen" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Cannot vary frequency on a timer that is already in use" msgstr "Kan de frequentie van een timer die al in gebruik is niet variëren" #: shared-module/bitbangio/SPI.c msgid "Cannot write without MOSI pin." msgstr "Kan niet schrijven zonder MOSI pin." #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "CharacteristicBuffer writing not provided" msgstr "CharacteristicBuffer schrijven is niet beschikbaar" #: supervisor/shared/safe_mode.c msgid "CircuitPython core code crashed hard. Whoops!\n" msgstr "CircuitPython core code is hard gecrashed. Ojee!\n" #: supervisor/shared/safe_mode.c msgid "" "CircuitPython is in safe mode because you pressed the reset button during " "boot. Press again to exit safe mode.\n" msgstr "" "CircuitPython is in veilige modus omdat de rest knop werd ingedrukt tijdens " "het opstarten. Druk nogmaals om veilige modus te verlaten\n" #: shared-module/bitbangio/SPI.c msgid "Clock pin init failed." msgstr "Clock pin init mislukt." #: shared-module/bitbangio/I2C.c msgid "Clock stretch too long" msgstr "Clock stretch is te lang" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Clock unit in use" msgstr "Clock unit in gebruik" #: shared-bindings/_pew/PewPew.c msgid "Column entry must be digitalio.DigitalInOut" msgstr "Column entry moet digitalio.DigitalInOut zijn" #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c #: shared-bindings/displayio/ParallelBus.c msgid "Command must be an int between 0 and 255" msgstr "Command moet een int tussen 0 en 255 zijn" #: shared-bindings/_bleio/Connection.c msgid "" "Connection has been disconnected and can no longer be used. Create a new " "connection." msgstr "" "Verbinding is verbroken en kan niet langer gebruikt worden. Creëer een " "nieuwe verbinding." #: py/persistentcode.c msgid "Corrupt .mpy file" msgstr "Corrupt .mpy bestand" #: py/emitglue.c msgid "Corrupt raw code" msgstr "Corrupt raw code" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c msgid "Could not initialize UART" msgstr "Kan UART niet initialiseren" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Could not initialize channel" msgstr "Kan kanaal niet initialiseren" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Could not initialize timer" msgstr "Kan timer niet initialiseren" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Could not re-init channel" msgstr "Kan kanaal niet her-initialiseren" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Could not re-init timer" msgstr "Kan timer niet her-initialiseren" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Could not restart PWM" msgstr "Kan PWM niet herstarten" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Could not start PWM" msgstr "Kan PWM niet starten" #: ports/stm/common-hal/busio/UART.c msgid "Could not start interrupt, RX busy" msgstr "Kan interrupt niet starten, RX is bezig" #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate decoder" msgstr "Kan decoder niet alloceren" #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate first buffer" msgstr "Kan eerste buffer niet alloceren" #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate input buffer" msgstr "Kan input buffer niet alloceren" #: shared-module/audiocore/WaveFile.c shared-module/audiomixer/Mixer.c #: shared-module/audiomp3/MP3Decoder.c msgid "Couldn't allocate second buffer" msgstr "Kan tweede buffer niet alloceren" #: supervisor/shared/safe_mode.c msgid "Crash into the HardFault_Handler." msgstr "Crash naar de HardFault_Handler." #: ports/stm/common-hal/analogio/AnalogOut.c msgid "DAC Channel Init Error" msgstr "DAC kanaal Init Fout" #: ports/stm/common-hal/analogio/AnalogOut.c msgid "DAC Device Init Error" msgstr "DAC Apparaat Init Fout" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "DAC already in use" msgstr "DAC al in gebruik" #: ports/atmel-samd/common-hal/displayio/ParallelBus.c #: ports/nrf/common-hal/displayio/ParallelBus.c msgid "Data 0 pin must be byte aligned" msgstr "Data 0 pin moet byte uitgelijnd zijn" #: shared-module/audiocore/WaveFile.c msgid "Data chunk must follow fmt chunk" msgstr "Data chunk moet gevolgd worden door fmt chunk" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Data too large for advertisement packet" msgstr "Data te groot voor advertisement pakket" #: shared-bindings/audiobusio/PDMIn.c msgid "Destination capacity is smaller than destination_length." msgstr "Bestemming grootte is kleiner dan destination_length." #: ports/nrf/common-hal/audiobusio/I2SOut.c msgid "Device in use" msgstr "Apparaat al in gebruik" #: ports/cxd56/common-hal/digitalio/DigitalInOut.c msgid "DigitalInOut not supported on given pin" msgstr "DigitalInOut niet ondersteund door gegeven pin" #: shared-bindings/displayio/Display.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Display must have a 16 bit colorspace." msgstr "Beeldscherm moet een 16bit kleurruimte hebben." #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Display rotation must be in 90 degree increments" msgstr "Beeldscherm rotatie moet in stappen van 90 graden" #: shared-bindings/digitalio/DigitalInOut.c msgid "Drive mode not used when direction is input." msgstr "Drive modus niet gebruikt als de richting input is." #: shared-bindings/aesio/aes.c msgid "ECB only operates on 16 bytes at a time" msgstr "ECB werkt alleen met 16 bytes tegelijkertijd" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/ps2io/Ps2.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c msgid "EXTINT channel already in use" msgstr "EXTINT kanaal al in gebruik" #: extmod/modure.c msgid "Error in regex" msgstr "Fout in regex" #: shared-bindings/aesio/aes.c shared-bindings/microcontroller/Pin.c #: shared-bindings/neopixel_write/__init__.c shared-bindings/pulseio/PulseOut.c #: shared-bindings/terminalio/Terminal.c msgid "Expected a %q" msgstr "Verwacht een %q" #: shared-bindings/_bleio/CharacteristicBuffer.c #: shared-bindings/_bleio/Descriptor.c shared-bindings/_bleio/PacketBuffer.c msgid "Expected a Characteristic" msgstr "Verwachtte een Characteristic" #: shared-bindings/_bleio/Characteristic.c msgid "Expected a Service" msgstr "Verwachtte een Service" #: shared-bindings/_bleio/Characteristic.c shared-bindings/_bleio/Descriptor.c #: shared-bindings/_bleio/Service.c msgid "Expected a UUID" msgstr "Verwachtte een UUID" #: shared-bindings/_bleio/Adapter.c msgid "Expected an Address" msgstr "Verwachtte een adres" #: shared-module/_pixelbuf/PixelBuf.c #, c-format msgid "Expected tuple of length %d, got %d" msgstr "Verwachtte een tuple met lengte %d, maar kreeg %d" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Extended advertisements with scan response not supported." msgstr "Extended advertisements met scan antwoord niet ondersteund." #: extmod/ulab/code/fft.c msgid "FFT is defined for ndarrays only" msgstr "FFT alleen voor ndarrays gedefineerd" #: shared-bindings/ps2io/Ps2.c msgid "Failed sending command." msgstr "Commando verzenden mislukt." #: ports/nrf/sd_mutex.c #, c-format msgid "Failed to acquire mutex, err 0x%04x" msgstr "Fout tijdens verkrijgen mutex, err 0x%04x" #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c msgid "Failed to allocate RX buffer" msgstr "RX buffer alloceren mislukt" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c #, c-format msgid "Failed to allocate RX buffer of %d bytes" msgstr "Mislukt een RX buffer van %d bytes te alloceren" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: internal error" msgstr "Verbinding mislukt: interne fout" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Failed to connect: timeout" msgstr "Verbinding mislukt: timeout" #: shared-module/audiomp3/MP3Decoder.c msgid "Failed to parse MP3 file" msgstr "Mislukt om MP3 bestand te ontleden" #: ports/nrf/sd_mutex.c #, c-format msgid "Failed to release mutex, err 0x%04x" msgstr "Mislukt mutex los te laten, err 0x%04x" #: supervisor/shared/safe_mode.c msgid "Failed to write internal flash." msgstr "Schrijven naar interne flash mislukt." #: py/moduerrno.c msgid "File exists" msgstr "Bestand bestaat" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "Frequency captured is above capability. Capture Paused." msgstr "" "De vastgelegde frequentie is boven de capaciteit. Vastleggen gepauzeerd." #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Frequency must match existing PWMOut using this timer" msgstr "" "Frequentie moet overeenkomen met bestaande PWMOut bij gebruik van deze timer" #: shared-bindings/bitbangio/I2C.c shared-bindings/bitbangio/SPI.c #: shared-bindings/busio/I2C.c shared-bindings/busio/SPI.c msgid "Function requires lock" msgstr "Functie vereist lock" #: shared-bindings/displayio/Display.c #: shared-bindings/displayio/EPaperDisplay.c #: shared-bindings/framebufferio/FramebufferDisplay.c msgid "Group already used" msgstr "Groep al gebruikt" #: shared-module/displayio/Group.c msgid "Group full" msgstr "Groep is vol" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/I2C.c #: ports/stm/common-hal/busio/SPI.c msgid "Hardware busy, try alternative pins" msgstr "Hardware bezig, probeer alternatieve pinnen" #: ports/stm/common-hal/busio/UART.c msgid "Hardware in use, try alternative pins" msgstr "Hardware in gebruik, probeer alternatieve pinnen" #: extmod/vfs_posix_file.c py/objstringio.c msgid "I/O operation on closed file" msgstr "I/O actie op gesloten bestand" #: ports/stm/common-hal/busio/I2C.c msgid "I2C Init Error" msgstr "I2C Init Fout" #: extmod/machine_i2c.c msgid "I2C operation not supported" msgstr "I2C actie niet ondersteund" #: shared-bindings/aesio/aes.c #, c-format msgid "IV must be %d bytes long" msgstr "IV %d bytes lang zijn" #: py/persistentcode.c msgid "" "Incompatible .mpy file. Please update all .mpy files. See http://adafru.it/" "mpy-update for more info." msgstr "" "Incompatibel .mpy bestand. Update alle .mpy bestanden. Zie http://adafru.it/" "mpy-update voor meer informatie." #: shared-bindings/_pew/PewPew.c msgid "Incorrect buffer size" msgstr "Incorrecte buffer grootte" #: py/moduerrno.c msgid "Input/output error" msgstr "Input/Output fout" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient authentication" msgstr "Onvoldoende authenticatie" #: ports/nrf/common-hal/_bleio/__init__.c msgid "Insufficient encryption" msgstr "Onvoldoende encryptie" #: ports/stm/common-hal/busio/UART.c msgid "Internal define error" msgstr "Interne define fout" #: shared-module/rgbmatrix/RGBMatrix.c #, c-format msgid "Internal error #%d" msgstr "Interne fout #%d" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Invalid %q pin" msgstr "Ongeldige %q pin" #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Invalid ADC Unit value" msgstr "Ongeldige ADC Unit waarde" #: shared-module/displayio/OnDiskBitmap.c msgid "Invalid BMP file" msgstr "Ongeldig BMP bestand" #: ports/stm/common-hal/analogio/AnalogOut.c msgid "Invalid DAC pin supplied" msgstr "Ongeldige DAC pin opgegeven" #: ports/mimxrt10xx/common-hal/busio/I2C.c ports/stm/common-hal/busio/I2C.c msgid "Invalid I2C pin selection" msgstr "Ongeldige I2C pin selectie" #: ports/atmel-samd/common-hal/pulseio/PWMOut.c #: ports/cxd56/common-hal/pulseio/PWMOut.c #: ports/nrf/common-hal/pulseio/PWMOut.c shared-bindings/pulseio/PWMOut.c msgid "Invalid PWM frequency" msgstr "Ongeldige PWM frequentie" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Invalid SPI pin selection" msgstr "Ongeldige SPI pin selectie" #: ports/mimxrt10xx/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid UART pin selection" msgstr "Ongeldige UART pin selectie" #: py/moduerrno.c shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid argument" msgstr "Ongeldig argument" #: shared-module/displayio/Bitmap.c msgid "Invalid bits per value" msgstr "Ongeldige bits per waarde" #: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "Invalid buffer size" msgstr "Ongeldige buffer grootte" #: shared-bindings/_pixelbuf/PixelBuf.c msgid "Invalid byteorder string" msgstr "Ongeldige byteorder string" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "Invalid capture period. Valid range: 1 - 500" msgstr "Ongeldige vastlegging periode. Geldig bereik: 1 - 500" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid channel count" msgstr "Ongeldige kanaal aantallen" #: shared-bindings/digitalio/DigitalInOut.c msgid "Invalid direction." msgstr "Ongeldige richting." #: shared-module/audiocore/WaveFile.c msgid "Invalid file" msgstr "Ongeldig bestand" #: shared-module/audiocore/WaveFile.c msgid "Invalid format chunk size" msgstr "Ongeldig formaat stuk grootte" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Invalid frequency supplied" msgstr "Ongeldige frequentie opgegeven" #: supervisor/shared/safe_mode.c msgid "Invalid memory access." msgstr "Ongeldig geheugen adres." #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "Invalid number of bits" msgstr "Ongeldig aantal bits" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c #: shared-bindings/displayio/FourWire.c msgid "Invalid phase" msgstr "Ongeldige fase" #: ports/atmel-samd/common-hal/audioio/AudioOut.c #: ports/atmel-samd/common-hal/touchio/TouchIn.c #: shared-bindings/pulseio/PWMOut.c shared-module/rgbmatrix/RGBMatrix.c msgid "Invalid pin" msgstr "Ongeldige pin" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Invalid pin for left channel" msgstr "Ongeldige pin voor linker kanaal" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Invalid pin for right channel" msgstr "Ongeldige pin voor rechter kanaal" #: ports/atmel-samd/common-hal/busio/I2C.c #: ports/atmel-samd/common-hal/busio/SPI.c #: ports/atmel-samd/common-hal/busio/UART.c #: ports/atmel-samd/common-hal/i2cslave/I2CSlave.c #: ports/cxd56/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/SPI.c #: ports/cxd56/common-hal/busio/UART.c ports/nrf/common-hal/busio/I2C.c msgid "Invalid pins" msgstr "Ongeldige pinnen" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "Invalid pins for PWMOut" msgstr "Ongeldige pinnen voor PWMOut" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c #: shared-bindings/displayio/FourWire.c msgid "Invalid polarity" msgstr "Ongeldige polariteit" #: shared-bindings/_bleio/Characteristic.c msgid "Invalid properties" msgstr "Ongeldige eigenschappen" #: shared-bindings/microcontroller/__init__.c msgid "Invalid run mode." msgstr "Ongeldige run modus." #: shared-module/_bleio/Attribute.c msgid "Invalid security_mode" msgstr "Ongeldige security_mode" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice" msgstr "Ongeldige stem" #: shared-bindings/audiomixer/Mixer.c msgid "Invalid voice count" msgstr "Ongeldig stem aantal" #: shared-module/audiocore/WaveFile.c msgid "Invalid wave file" msgstr "Ongeldig wave bestand" #: ports/stm/common-hal/busio/UART.c msgid "Invalid word/bit length" msgstr "Ongeldig woord/bit lengte" #: shared-bindings/aesio/aes.c msgid "Key must be 16, 24, or 32 bytes long" msgstr "Sleutel moet 16, 24, of 32 bytes lang zijn" #: py/compile.c msgid "LHS of keyword arg must be an id" msgstr "LHS van sleutelwoord arg moet een id zijn" #: shared-module/displayio/Group.c msgid "Layer already in a group." msgstr "Laag al in groep." #: shared-module/displayio/Group.c msgid "Layer must be a Group or TileGrid subclass." msgstr "Laag moet een Groep of TileGrid subklasse zijn." #: py/objslice.c msgid "Length must be an int" msgstr "Lengte moet een int zijn" #: py/objslice.c msgid "Length must be non-negative" msgstr "Lengte moet niet negatief zijn" #: shared-module/bitbangio/SPI.c msgid "MISO pin init failed." msgstr "MISO pin init mislukt." #: shared-module/bitbangio/SPI.c msgid "MOSI pin init failed." msgstr "MOSI pin init mislukt." #: shared-module/displayio/Shape.c #, c-format msgid "Maximum x value when mirrored is %d" msgstr "Maximale x waarde indien gespiegeld is %d" #: supervisor/shared/safe_mode.c msgid "MicroPython NLR jump failed. Likely memory corruption." msgstr "MicroPython NLR sprong mislukt. Waarschijnlijk geheugen corruptie." #: supervisor/shared/safe_mode.c msgid "MicroPython fatal error." msgstr "MicroPython fatale fout." #: shared-bindings/audiobusio/PDMIn.c msgid "Microphone startup delay must be in range 0.0 to 1.0" msgstr "Microfoon opstart vertraging moet in bereik van 0.0 tot 1.0 zijn" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Missing MISO or MOSI Pin" msgstr "Ontbrekende MISO of MOSI Pin" #: shared-bindings/displayio/Group.c msgid "Must be a %q subclass." msgstr "%q moet een subklasse zijn." #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "Must provide MISO or MOSI pin" msgstr "MISO of MOSI moeten worden gegeven" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "Must use a multiple of 6 rgb pins, not %d" msgstr "Een meervoud van 6 rgb pinnen moet worden gebruikt, niet %d" #: py/parse.c msgid "Name too long" msgstr "Naam te lang" #: shared-bindings/_pixelbuf/PixelBuf.c msgid "Negative step not supported" msgstr "Negatieve stappen niet ondersteund" #: ports/nrf/common-hal/_bleio/Characteristic.c msgid "No CCCD for this Characteristic" msgstr "Geen CCCD voor deze Characteristic" #: ports/atmel-samd/common-hal/analogio/AnalogOut.c #: ports/stm/common-hal/analogio/AnalogOut.c msgid "No DAC on chip" msgstr "Geen DAC op de chip" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "No DMA channel found" msgstr "Geen DMA kanaal gevonden" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "No MISO Pin" msgstr "Geen MISO pin" #: ports/mimxrt10xx/common-hal/busio/SPI.c ports/stm/common-hal/busio/SPI.c msgid "No MOSI Pin" msgstr "Geen MOSI pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No RX pin" msgstr "Geen RX pin" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: ports/stm/common-hal/busio/UART.c msgid "No TX pin" msgstr "Geen TX pin" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c msgid "No available clocks" msgstr "Geen klokken beschikbaar" #: shared-bindings/_bleio/PacketBuffer.c msgid "No connection: length cannot be determined" msgstr "Geen verbinding: lengte kan niet worden bepaald" #: shared-bindings/board/__init__.c msgid "No default %q bus" msgstr "Geen standaard %q bus" #: ports/atmel-samd/common-hal/touchio/TouchIn.c msgid "No free GCLKs" msgstr "Geen vrije GCLKs" #: shared-bindings/os/__init__.c msgid "No hardware random available" msgstr "Geen hardware random beschikbaar" #: ports/atmel-samd/common-hal/ps2io/Ps2.c msgid "No hardware support on clk pin" msgstr "Geen hardware ondersteuning beschikbaar op clk pin" #: ports/atmel-samd/common-hal/frequencyio/FrequencyIn.c #: ports/atmel-samd/common-hal/pulseio/PulseIn.c msgid "No hardware support on pin" msgstr "Geen hardware ondersteuning op pin" #: shared-bindings/aesio/aes.c msgid "No key was specified" msgstr "Een sleutel was niet gespecificeerd" #: shared-bindings/time/__init__.c msgid "No long integer support" msgstr "Geen lange integer ondersteuning" #: ports/stm/common-hal/pulseio/PWMOut.c msgid "No more timers available on this pin." msgstr "Geen timers meer beschikbaar op deze pin." #: shared-module/touchio/TouchIn.c msgid "No pulldown on pin; 1Mohm recommended" msgstr "Geen pulldown op pin; 1MOhm aangeraden" #: py/moduerrno.c msgid "No space left on device" msgstr "Geen ruimte meer beschikbaar op apparaat" #: py/moduerrno.c msgid "No such file/directory" msgstr "Bestand/map bestaat niet" #: shared-module/rgbmatrix/RGBMatrix.c msgid "No timer available" msgstr "Geen timer beschikbaar" #: supervisor/shared/safe_mode.c msgid "Nordic Soft Device failure assertion." msgstr "Nordic Soft Device assertion mislukt." #: ports/nrf/common-hal/_bleio/__init__.c #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "Not connected" msgstr "Niet verbonden" #: shared-bindings/audiobusio/I2SOut.c shared-bindings/audioio/AudioOut.c #: shared-bindings/audiopwmio/PWMAudioOut.c msgid "Not playing" msgstr "Wordt niet afgespeeld" #: shared-bindings/util.c msgid "" "Object has been deinitialized and can no longer be used. Create a new object." msgstr "" "Object is gedeïnitialiseerd en kan niet meer gebruikt worden. Creëer een " "nieuw object." #: ports/nrf/common-hal/busio/UART.c msgid "Odd parity is not supported" msgstr "Oneven pariteit is niet ondersteund" #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Only 8 or 16 bit mono with " msgstr "Alleen 8 of 16 bit mono met " #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" "Only Windows format, uncompressed BMP supported: given header size is %d" msgstr "" "Alleen Windows formaat en ongecomprimeerd BMP ondersteund: gegeven header " "grootte is %d" #: shared-module/displayio/OnDiskBitmap.c #, c-format msgid "" "Only monochrome, indexed 4bpp or 8bpp, and 16bpp or greater BMPs supported: " "%d bpp given" msgstr "" "Alleen monochrome en 4bpp of 8bpp, en 16bpp of grotere geïndiceerde BMP's " "zijn ondersteund: %d bpp is gegeven" #: shared-bindings/audiobusio/PDMIn.c msgid "Oversample must be multiple of 8." msgstr "Oversample moet een meervoud van 8 zijn." #: shared-bindings/pulseio/PWMOut.c msgid "" "PWM duty_cycle must be between 0 and 65535 inclusive (16 bit resolution)" msgstr "" "PWM duty_cycle moet tussen 0 en 65535 inclusief zijn (16 bit resolutie)" #: shared-bindings/pulseio/PWMOut.c msgid "" "PWM frequency not writable when variable_frequency is False on construction." msgstr "" "PWM frequentie is niet schrijfbaar wanneer de variable_frequency False is " "tijdens constructie." #: ports/mimxrt10xx/common-hal/displayio/ParallelBus.c #: ports/stm/common-hal/displayio/ParallelBus.c msgid "ParallelBus not yet supported" msgstr "ParallelBus nog niet ondersteund" #: py/moduerrno.c msgid "Permission denied" msgstr "Toegang geweigerd" #: ports/atmel-samd/common-hal/analogio/AnalogIn.c #: ports/cxd56/common-hal/analogio/AnalogIn.c #: ports/mimxrt10xx/common-hal/analogio/AnalogIn.c #: ports/nrf/common-hal/analogio/AnalogIn.c #: ports/stm/common-hal/analogio/AnalogIn.c msgid "Pin does not have ADC capabilities" msgstr "Pin heeft geen ADC mogelijkheden" #: ports/atmel-samd/common-hal/countio/Counter.c msgid "Pin must support hardware interrupts" msgstr "Pin moet hardware interrupts ondersteunen" #: ports/stm/common-hal/pulseio/PulseIn.c msgid "Pin number already reserved by EXTI" msgstr "Pin nummer al gereserveerd door EXTI" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "" "Pinout uses %d bytes per element, which consumes more than the ideal %d " "bytes. If this cannot be avoided, pass allow_inefficient=True to the " "constructor" msgstr "" "Pinout gebruikt %d bytes per element, welke meer dan de ideale %d bytes " "gebruikt. Als dit niet kan worden vermeden, geef dan het argument " "allow_inefficient=True aan de constructor" #: py/builtinhelp.c msgid "Plus any modules on the filesystem\n" msgstr "En iedere module in het bestandssysteem\n" #: shared-module/vectorio/Polygon.c msgid "Polygon needs at least 3 points" msgstr "" #: shared-bindings/ps2io/Ps2.c msgid "Pop from an empty Ps2 buffer" msgstr "Pop van een lege Ps2 buffer" #: shared-bindings/_bleio/Adapter.c msgid "Prefix buffer must be on the heap" msgstr "Prefix buffer moet op de heap zijn" #: main.c msgid "Press any key to enter the REPL. Use CTRL-D to reload." msgstr "" "Druk een willekeurige toets om de REPL te starten. Gebruik CTRL+D om te " "herstarten." #: shared-bindings/digitalio/DigitalInOut.c msgid "Pull not used when direction is output." msgstr "Pull niet gebruikt wanneer de richting output is." #: ports/stm/common-hal/pulseio/PulseIn.c msgid "PulseIn not supported on this chip" msgstr "PusleIn niet ondersteund door deze chip" #: ports/stm/common-hal/pulseio/PulseOut.c msgid "PulseOut not supported on this chip" msgstr "PulseOut niet ondersteund door deze chip" #: ports/stm/common-hal/os/__init__.c msgid "RNG DeInit Error" msgstr "RNG DeInit Fout" #: ports/stm/common-hal/os/__init__.c msgid "RNG Init Error" msgstr "RNG Init Fout" #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "RS485 inversion specified when not in RS485 mode" msgstr "RS485 inversie gespecificeerd terwijl niet in RS485 modus" #: ports/cxd56/common-hal/rtc/RTC.c ports/mimxrt10xx/common-hal/rtc/RTC.c #: ports/nrf/common-hal/rtc/RTC.c msgid "RTC calibration is not supported on this board" msgstr "RTC calibratie niet ondersteund door dit board" #: shared-bindings/time/__init__.c msgid "RTC is not supported on this board" msgstr "RTC is niet ondersteund door dit board" #: ports/atmel-samd/common-hal/busio/UART.c ports/cxd56/common-hal/busio/UART.c #: ports/nrf/common-hal/busio/UART.c ports/stm/common-hal/busio/UART.c msgid "RTS/CTS/RS485 Not yet supported on this device" msgstr "RTS/CTS/RS485 Nog niet ondersteund door dit apparaat" #: ports/stm/common-hal/os/__init__.c msgid "Random number generation error" msgstr "Random number generatie fout" #: shared-bindings/pulseio/PulseIn.c msgid "Read-only" msgstr "Alleen-lezen" #: extmod/vfs_fat.c py/moduerrno.c msgid "Read-only filesystem" msgstr "Alleen-lezen bestandssysteem" #: shared-module/displayio/Bitmap.c msgid "Read-only object" msgstr "Alleen-lezen object" #: shared-bindings/displayio/EPaperDisplay.c msgid "Refresh too soon" msgstr "Verversing te snel" #: shared-bindings/aesio/aes.c msgid "Requested AES mode is unsupported" msgstr "Gevraagde AES modus is niet ondersteund" #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Right channel unsupported" msgstr "Rechter kanaal niet ondersteund" #: shared-bindings/_pew/PewPew.c msgid "Row entry must be digitalio.DigitalInOut" msgstr "Rij invoeging moet digitalio.DigitalInOut zijn" #: main.c msgid "Running in safe mode! Auto-reload is off.\n" msgstr "Draaiende in veilige modus! Auto-herlaad is uit.\n" #: main.c msgid "Running in safe mode! Not running saved code.\n" msgstr "Draaiende in veilige modus! Opgeslagen code wordt niet uitgevoerd.\n" #: ports/atmel-samd/common-hal/busio/I2C.c ports/nrf/common-hal/busio/I2C.c msgid "SDA or SCL needs a pull up" msgstr "SDA of SCL hebben een pullup nodig" #: ports/stm/common-hal/busio/SPI.c msgid "SPI Init Error" msgstr "SPI Init Fout" #: ports/stm/common-hal/busio/SPI.c msgid "SPI Re-initialization error" msgstr "SPI Herinitialisatie Fout" #: shared-bindings/audiomixer/Mixer.c msgid "Sample rate must be positive" msgstr "Sample rate moet positief zijn" #: ports/atmel-samd/common-hal/audioio/AudioOut.c #, c-format msgid "Sample rate too high. It must be less than %d" msgstr "Sample rate is te hoog. Moet minder dan %d zijn" #: ports/nrf/common-hal/_bleio/Adapter.c msgid "Scan already in progess. Stop with stop_scan." msgstr "Scan wordt al uitvoerd. Stop met stop_scan." #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Selected CTS pin not valid" msgstr "Geselecteerde CTS pin niet geldig" #: ports/mimxrt10xx/common-hal/busio/UART.c msgid "Selected RTS pin not valid" msgstr "Geselecteerde RTS pin niet geldig" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Serializer in use" msgstr "Serializer in gebruik" #: shared-bindings/nvm/ByteArray.c msgid "Slice and value different lengths." msgstr "Slice en waarde hebben verschillende lengtes." #: shared-bindings/displayio/Bitmap.c shared-bindings/displayio/Group.c #: shared-bindings/displayio/TileGrid.c shared-bindings/pulseio/PulseIn.c msgid "Slices not supported" msgstr "Slices niet ondersteund" #: shared-bindings/aesio/aes.c msgid "Source and destination buffers must be the same length" msgstr "Bron en bestemming buffers moeten dezelfde lengte hebben" #: extmod/modure.c msgid "Splitting with sub-captures" msgstr "Splitting met sub-captures" #: shared-bindings/supervisor/__init__.c msgid "Stack size must be at least 256" msgstr "Stack grootte moet op zijn minst 256 zijn" #: shared-bindings/multiterminal/__init__.c msgid "Stream missing readinto() or write() method." msgstr "Stream mist readinto() of write() methode." #: ports/stm/common-hal/busio/UART.c msgid "Supply at least one UART pin" msgstr "Geef op zijn minst 1 UART pin op" #: ports/stm/common-hal/microcontroller/Processor.c msgid "Temperature read timed out" msgstr "Temperatuur lees time-out" #: supervisor/shared/safe_mode.c msgid "" "The CircuitPython heap was corrupted because the stack was too small.\n" "Please increase the stack size if you know how, or if not:" msgstr "" "De CircuitPyton heap is corrupt omdat de stack te klein was.\n" "Vergroot de stack grootte als je weet hoe, zo niet:" #: supervisor/shared/safe_mode.c msgid "" "The `microcontroller` module was used to boot into safe mode. Press reset to " "exit safe mode.\n" msgstr "" "De `microcontroller` module is gebruikt om in veilige modus op te starten. " "Druk reset om de veilige modus te verlaten.\n" #: supervisor/shared/safe_mode.c msgid "" "The microcontroller's power dipped. Make sure your power supply provides\n" "enough power for the whole circuit and press reset (after ejecting " "CIRCUITPY).\n" msgstr "" "Het vermogen van de microcontroller zakte. Zorg ervoor dat de " "stroomvoorziening \n" "voldoende vermogen heeft voor het hele systeem en druk reset (na uitwerpen " "van CIRCUITPY).\n" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's bits_per_sample does not match the mixer's" msgstr "De sample's bits_per_sample komen niet overeen met die van de mixer" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's channel count does not match the mixer's" msgstr "De sample's kanaal aantal komt niet overeen met die van de mixer" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's sample rate does not match the mixer's" msgstr "De sample's sample rate komt niet overeen met die van de mixer" #: shared-module/audiomixer/MixerVoice.c msgid "The sample's signedness does not match the mixer's" msgstr "De sample's signature komt niet overeen met die van de mixer" #: shared-bindings/displayio/TileGrid.c msgid "Tile height must exactly divide bitmap height" msgstr "Tile hoogte moet exact de bitmap hoogte verdelen" #: shared-bindings/displayio/TileGrid.c shared-module/displayio/TileGrid.c msgid "Tile index out of bounds" msgstr "Tile index buiten bereik" #: shared-bindings/displayio/TileGrid.c msgid "Tile value out of bounds" msgstr "Tile waarde buiten bereik" #: shared-bindings/displayio/TileGrid.c msgid "Tile width must exactly divide bitmap width" msgstr "Tile breedte moet exact de bitmap breedte verdelen" #: ports/nrf/common-hal/_bleio/Adapter.c #, c-format msgid "Timeout is too long: Maximum timeout length is %d seconds" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c msgid "Too many channels in sample." msgstr "Teveel kanalen in sample." #: shared-module/displayio/__init__.c msgid "Too many display busses" msgstr "Teveel beeldscherm bussen" #: shared-module/displayio/__init__.c msgid "Too many displays" msgstr "Teveel beeldschermen" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Total data to write is larger than outgoing_packet_length" msgstr "Totale data om te schrijven is groter dan outgoing_packet_length" #: py/obj.c msgid "Traceback (most recent call last):\n" msgstr "Traceback (meest recente call laatst):\n" #: shared-bindings/time/__init__.c msgid "Tuple or struct_time argument required" msgstr "Tuple of struct_time argument vereist" #: ports/stm/common-hal/busio/UART.c msgid "UART Buffer allocation error" msgstr "UART Buffer allocatie fout" #: ports/stm/common-hal/busio/UART.c msgid "UART De-init error" msgstr "UART De-init fout" #: ports/stm/common-hal/busio/UART.c msgid "UART Init Error" msgstr "UART Init Fout" #: ports/stm/common-hal/busio/UART.c msgid "UART Re-init error" msgstr "UART Re-init Fout" #: ports/stm/common-hal/busio/UART.c msgid "UART write error" msgstr "UART schrijf fout" #: shared-module/usb_hid/Device.c msgid "USB Busy" msgstr "USB Bezet" #: shared-module/usb_hid/Device.c msgid "USB Error" msgstr "USB Fout" #: shared-bindings/_bleio/UUID.c msgid "UUID integer value must be 0-0xffff" msgstr "UUID integer waarde moet tussen 0 en 0xffff liggen" #: shared-bindings/_bleio/UUID.c msgid "UUID string not 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'" msgstr "UUID string is niet 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx'" #: shared-bindings/_bleio/UUID.c msgid "UUID value is not str, int or byte buffer" msgstr "UUID waarde is geen str, int, of byte buffer" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audioio/AudioOut.c msgid "Unable to allocate buffers for signed conversion" msgstr "Niet in staat buffers voor gesigneerde conversie te alloceren" #: shared-module/displayio/I2CDisplay.c #, c-format msgid "Unable to find I2C Display at %x" msgstr "Geen I2C beeldscherm gevonden bij %x" #: ports/atmel-samd/common-hal/audiobusio/I2SOut.c #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "Unable to find free GCLK" msgstr "Niet in staat een vrije GCLK te vinden" #: py/parse.c msgid "Unable to init parser" msgstr "Niet in staat om de parser te initialiseren" #: shared-module/displayio/OnDiskBitmap.c msgid "Unable to read color palette data" msgstr "Niet in staat kleurenpalet data te lezen" #: shared-bindings/nvm/ByteArray.c msgid "Unable to write to nvm." msgstr "Niet in staat om naar nvm te schrijven." #: ports/nrf/common-hal/_bleio/UUID.c msgid "Unexpected nrfx uuid type" msgstr "Onverwacht mrfx uuid type" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown gatt error: 0x%04x" msgstr "Onbekende gatt fout: 0x%04x" #: supervisor/shared/safe_mode.c msgid "Unknown reason." msgstr "Onbekende reden." #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown security error: 0x%04x" msgstr "Onbekende veiligheidsfout: 0x%04x" #: ports/nrf/common-hal/_bleio/__init__.c #, c-format msgid "Unknown soft device error: %04x" msgstr "Onbekende soft device fout: %04x" #: shared-bindings/_pixelbuf/PixelBuf.c #, c-format msgid "Unmatched number of items on RHS (expected %d, got %d)." msgstr "Niet overeenkomend aantal RHS items (verwachtte %d, kreeg %d)." #: ports/nrf/common-hal/_bleio/__init__.c msgid "" "Unspecified issue. Can be that the pairing prompt on the other device was " "declined or ignored." msgstr "" "Ongespecificeerd probleem. Kan zijn dat de pariteit prompt op het andere " "apparaat geweigerd of genegeerd werd." #: ports/atmel-samd/common-hal/busio/I2C.c ports/cxd56/common-hal/busio/I2C.c msgid "Unsupported baudrate" msgstr "Niet-ondersteunde baudsnelheid" #: shared-module/displayio/display_core.c msgid "Unsupported display bus type" msgstr "Niet-ondersteund beeldscherm bus type" #: shared-module/audiocore/WaveFile.c msgid "Unsupported format" msgstr "Niet-ondersteunde format" #: py/moduerrno.c msgid "Unsupported operation" msgstr "Niet-ondersteunde operatie" #: shared-bindings/digitalio/DigitalInOut.c msgid "Unsupported pull value." msgstr "Niet-ondersteunde pull-waarde." #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c msgid "Value length != required fixed length" msgstr "Waarde lengte != vereist vaste lengte" #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c msgid "Value length > max_length" msgstr "Waarde length > max_length" #: py/emitnative.c msgid "Viper functions don't currently support more than 4 arguments" msgstr "Viper-functies ondersteunen momenteel niet meer dan 4 argumenten" #: ports/stm/common-hal/microcontroller/Processor.c msgid "Voltage read timed out" msgstr "Voltage lees time-out" #: main.c msgid "WARNING: Your code filename has two extensions\n" msgstr "WAARSCHUWING: De bestandsnaam van de code heeft twee extensies\n" #: py/builtinhelp.c #, c-format msgid "" "Welcome to Adafruit CircuitPython %s!\n" "\n" "Please visit learn.adafruit.com/category/circuitpython for project guides.\n" "\n" "To list built-in modules please do `help(\"modules\")`.\n" msgstr "" "Welkom bij Adafruit CircuitPython %s!\n" "\n" "Bezoek learn.adafruit.com/category/circuitpython voor projectgidsen.\n" "\n" "Voor een lijst van ingebouwde modules, gebruik `help(\"modules\")`.\n" #: ports/nrf/common-hal/_bleio/PacketBuffer.c msgid "Writes not supported on Characteristic" msgstr "Schrijven niet ondersteund op Characteristic" #: supervisor/shared/safe_mode.c msgid "You are in safe mode: something unanticipated happened.\n" msgstr "Je bent in de veilige modus: er is iets onverwachts gebeurd.\n" #: supervisor/shared/safe_mode.c msgid "You requested starting safe mode by " msgstr "Je hebt aangeven de veilige modus te starten door " #: py/objtype.c msgid "__init__() should return None" msgstr "__init __ () zou None moeten retourneren" #: py/objtype.c #, c-format msgid "__init__() should return None, not '%s'" msgstr "__init __ () zou None moeten retouneren, niet '%s'" #: py/objobject.c msgid "__new__ arg must be a user-type" msgstr "__new__ arg moet een user-type zijn" #: extmod/modubinascii.c extmod/moduhashlib.c msgid "a bytes-like object is required" msgstr "een bytes-achtig object is vereist" #: lib/embed/abort_.c msgid "abort() called" msgstr "abort() aangeroepen" #: extmod/machine_mem.c #, c-format msgid "address %08x is not aligned to %d bytes" msgstr "adres %08x is niet afgestemd op %d bytes" #: shared-bindings/i2cslave/I2CSlave.c msgid "address out of bounds" msgstr "adres buiten bereik" #: shared-bindings/i2cslave/I2CSlave.c msgid "addresses is empty" msgstr "adressen zijn leeg" #: extmod/ulab/code/vectorise.c msgid "arctan2 is implemented for scalars and ndarrays only" msgstr "arctan2 is alleen geïmplementeerd voor scalars en ndarrays" #: py/modbuiltins.c msgid "arg is an empty sequence" msgstr "arg is een lege sequentie" #: extmod/ulab/code/numerical.c msgid "argsort argument must be an ndarray" msgstr "argsort argument moet een ndarray zijn" #: py/runtime.c msgid "argument has wrong type" msgstr "argument heeft het verkeerde type" #: py/argcheck.c shared-bindings/_stage/__init__.c #: shared-bindings/digitalio/DigitalInOut.c shared-bindings/gamepad/GamePad.c msgid "argument num/types mismatch" msgstr "argument num/typen komen niet overeen" #: py/runtime.c msgid "argument should be a '%q' not a '%q'" msgstr "argument moet een '%q' zijn en niet een '%q'" #: extmod/ulab/code/linalg.c msgid "arguments must be ndarrays" msgstr "argumenten moeten ndarrays zijn" #: py/objarray.c shared-bindings/nvm/ByteArray.c msgid "array/bytes required on right side" msgstr "array/bytes vereist aan de rechterkant" #: extmod/ulab/code/numerical.c msgid "attempt to get argmin/argmax of an empty sequence" msgstr "poging om argmin/argmax van een lege sequentie te krijgen" #: py/objstr.c msgid "attributes not supported yet" msgstr "attributen nog niet ondersteund" #: extmod/ulab/code/numerical.c msgid "axis must be -1, 0, None, or 1" msgstr "as moet -1, 0, None, of 1 zijn" #: extmod/ulab/code/numerical.c msgid "axis must be -1, 0, or 1" msgstr "as moet -1, 0, of 1 zijn" #: extmod/ulab/code/numerical.c msgid "axis must be None, 0, or 1" msgstr "as moet None, 0, of 1 zijn" #: py/builtinevex.c msgid "bad compile mode" msgstr "verkeerde compileer modus" #: py/objstr.c msgid "bad conversion specifier" msgstr "" #: py/objstr.c msgid "bad format string" msgstr "" #: py/binary.c msgid "bad typecode" msgstr "" #: py/emitnative.c msgid "binary op %q not implemented" msgstr "" #: shared-bindings/busio/UART.c msgid "bits must be 7, 8 or 9" msgstr "" #: extmod/machine_spi.c msgid "bits must be 8" msgstr "" #: shared-bindings/audiomixer/Mixer.c msgid "bits_per_sample must be 8 or 16" msgstr "" #: py/emitinlinethumb.c msgid "branch not in range" msgstr "" #: shared-bindings/audiocore/RawSample.c msgid "buffer must be a bytes-like object" msgstr "" #: shared-module/struct/__init__.c msgid "buffer size must match format" msgstr "" #: shared-bindings/bitbangio/SPI.c shared-bindings/busio/SPI.c msgid "buffer slices must be of equal length" msgstr "" #: py/modstruct.c shared-bindings/struct/__init__.c #: shared-module/struct/__init__.c msgid "buffer too small" msgstr "" #: extmod/machine_spi.c msgid "buffers must be the same length" msgstr "" #: shared-bindings/_pew/PewPew.c msgid "buttons must be digitalio.DigitalInOut" msgstr "" #: py/vm.c msgid "byte code not implemented" msgstr "" #: shared-bindings/_pixelbuf/PixelBuf.c msgid "byteorder is not a string" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c msgid "bytes > 8 bits not supported" msgstr "" #: py/objstr.c msgid "bytes value out of range" msgstr "" #: ports/atmel-samd/bindings/samd/Clock.c msgid "calibration is out of range" msgstr "" #: ports/atmel-samd/bindings/samd/Clock.c msgid "calibration is read only" msgstr "" #: ports/atmel-samd/common-hal/rtc/RTC.c msgid "calibration value out of range +/-127" msgstr "" #: py/emitinlinethumb.c msgid "can only have up to 4 parameters to Thumb assembly" msgstr "" #: py/emitinlinextensa.c msgid "can only have up to 4 parameters to Xtensa assembly" msgstr "" #: py/persistentcode.c msgid "can only save bytecode" msgstr "" #: py/objtype.c msgid "can't add special method to already-subclassed class" msgstr "" #: py/compile.c msgid "can't assign to expression" msgstr "" #: py/obj.c #, c-format msgid "can't convert %s to complex" msgstr "" #: py/obj.c #, c-format msgid "can't convert %s to float" msgstr "" #: py/obj.c #, c-format msgid "can't convert %s to int" msgstr "" #: py/objstr.c msgid "can't convert '%q' object to %q implicitly" msgstr "" #: py/objint.c msgid "can't convert NaN to int" msgstr "" #: shared-bindings/i2cslave/I2CSlave.c msgid "can't convert address to int" msgstr "" #: py/objint.c msgid "can't convert inf to int" msgstr "" #: py/obj.c msgid "can't convert to complex" msgstr "" #: py/obj.c msgid "can't convert to float" msgstr "" #: py/obj.c msgid "can't convert to int" msgstr "" #: py/objstr.c msgid "can't convert to str implicitly" msgstr "" #: py/compile.c msgid "can't declare nonlocal in outer code" msgstr "" #: py/compile.c msgid "can't delete expression" msgstr "" #: py/emitnative.c msgid "can't do binary op between '%q' and '%q'" msgstr "" #: py/objcomplex.c msgid "can't do truncated division of a complex number" msgstr "" #: py/compile.c msgid "can't have multiple **x" msgstr "" #: py/compile.c msgid "can't have multiple *x" msgstr "" #: py/emitnative.c msgid "can't implicitly convert '%q' to 'bool'" msgstr "" #: py/emitnative.c msgid "can't load from '%q'" msgstr "" #: py/emitnative.c msgid "can't load with '%q' index" msgstr "" #: py/objgenerator.c msgid "can't pend throw to just-started generator" msgstr "" #: py/objgenerator.c msgid "can't send non-None value to a just-started generator" msgstr "" #: py/objnamedtuple.c msgid "can't set attribute" msgstr "" #: py/emitnative.c msgid "can't store '%q'" msgstr "" #: py/emitnative.c msgid "can't store to '%q'" msgstr "" #: py/emitnative.c msgid "can't store with '%q' index" msgstr "" #: py/objstr.c msgid "" "can't switch from automatic field numbering to manual field specification" msgstr "" #: py/objstr.c msgid "" "can't switch from manual field specification to automatic field numbering" msgstr "" #: py/objtype.c msgid "cannot create '%q' instances" msgstr "" #: py/objtype.c msgid "cannot create instance" msgstr "" #: py/runtime.c msgid "cannot import name %q" msgstr "" #: py/builtinimport.c msgid "cannot perform relative import" msgstr "" #: extmod/ulab/code/ndarray.c msgid "cannot reshape array (incompatible input/output shape)" msgstr "" #: py/emitnative.c msgid "casting" msgstr "" #: shared-bindings/_stage/Text.c msgid "chars buffer too small" msgstr "" #: py/modbuiltins.c msgid "chr() arg not in range(0x110000)" msgstr "" #: py/modbuiltins.c msgid "chr() arg not in range(256)" msgstr "" #: shared-module/vectorio/Circle.c msgid "circle can only be registered in one parent" msgstr "" #: shared-bindings/displayio/Palette.c msgid "color buffer must be 3 bytes (RGB) or 4 bytes (RGB + pad byte)" msgstr "" #: shared-bindings/displayio/Palette.c msgid "color buffer must be a buffer, tuple, list, or int" msgstr "" #: shared-bindings/displayio/Palette.c msgid "color buffer must be a bytearray or array of type 'b' or 'B'" msgstr "" #: shared-bindings/displayio/Palette.c msgid "color must be between 0x000000 and 0xffffff" msgstr "" #: shared-bindings/displayio/ColorConverter.c msgid "color should be an int" msgstr "" #: py/objcomplex.c msgid "complex division by zero" msgstr "" #: py/objfloat.c py/parsenum.c msgid "complex values not supported" msgstr "" #: extmod/moduzlib.c msgid "compression header" msgstr "" #: py/parse.c msgid "constant must be an integer" msgstr "" #: py/emitnative.c msgid "conversion to object" msgstr "" #: extmod/ulab/code/filter.c msgid "convolve arguments must be linear arrays" msgstr "" #: extmod/ulab/code/filter.c msgid "convolve arguments must be ndarrays" msgstr "" #: extmod/ulab/code/filter.c msgid "convolve arguments must not be empty" msgstr "" #: extmod/ulab/code/ndarray.c msgid "could not broadast input array from shape" msgstr "" #: extmod/ulab/code/poly.c msgid "could not invert Vandermonde matrix" msgstr "" #: extmod/ulab/code/numerical.c msgid "ddof must be smaller than length of data set" msgstr "" #: py/parsenum.c msgid "decimal numbers not supported" msgstr "" #: py/compile.c msgid "default 'except' must be last" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "" "destination buffer must be a bytearray or array of type 'B' for bit_depth = 8" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "destination buffer must be an array of type 'H' for bit_depth = 16" msgstr "" #: shared-bindings/audiobusio/PDMIn.c msgid "destination_length must be an int >= 0" msgstr "" #: py/objdict.c msgid "dict update sequence has wrong length" msgstr "" #: extmod/ulab/code/numerical.c msgid "diff argument must be an ndarray" msgstr "" #: py/modmath.c py/objfloat.c py/objint_longlong.c py/objint_mpz.c py/runtime.c #: shared-bindings/math/__init__.c msgid "division by zero" msgstr "" #: py/objdeque.c msgid "empty" msgstr "" #: extmod/moduheapq.c extmod/modutimeq.c msgid "empty heap" msgstr "" #: py/objstr.c msgid "empty separator" msgstr "" #: shared-bindings/random/__init__.c msgid "empty sequence" msgstr "" #: py/objstr.c msgid "end of format while looking for conversion specifier" msgstr "" #: shared-bindings/displayio/Shape.c msgid "end_x should be an int" msgstr "" #: ports/nrf/common-hal/busio/UART.c #, c-format msgid "error = 0x%08lX" msgstr "" #: py/runtime.c msgid "exceptions must derive from BaseException" msgstr "" #: py/objstr.c msgid "expected ':' after format specifier" msgstr "" #: py/obj.c msgid "expected tuple/list" msgstr "" #: py/modthread.c msgid "expecting a dict for keyword args" msgstr "" #: py/compile.c msgid "expecting an assembler instruction" msgstr "" #: py/compile.c msgid "expecting just a value for set" msgstr "" #: py/compile.c msgid "expecting key:value for dict" msgstr "" #: py/argcheck.c msgid "extra keyword arguments given" msgstr "" #: py/argcheck.c msgid "extra positional arguments given" msgstr "" #: py/parse.c msgid "f-string expression part cannot include a '#'" msgstr "" #: py/parse.c msgid "f-string expression part cannot include a backslash" msgstr "" #: py/parse.c msgid "f-string: empty expression not allowed" msgstr "" #: py/parse.c msgid "f-string: expecting '}'" msgstr "" #: py/parse.c msgid "f-string: single '}' is not allowed" msgstr "" #: shared-bindings/audiocore/WaveFile.c shared-bindings/audiomp3/MP3Decoder.c #: shared-bindings/displayio/OnDiskBitmap.c msgid "file must be a file opened in byte mode" msgstr "" #: shared-bindings/storage/__init__.c msgid "filesystem must provide mount method" msgstr "" #: extmod/ulab/code/ndarray.c msgid "first argument must be an iterable" msgstr "" #: extmod/ulab/code/vectorise.c msgid "first argument must be an ndarray" msgstr "" #: py/objtype.c msgid "first argument to super() must be type" msgstr "" #: extmod/machine_spi.c msgid "firstbit must be MSB" msgstr "" #: extmod/ulab/code/ndarray.c msgid "flattening order must be either 'C', or 'F'" msgstr "" #: extmod/ulab/code/numerical.c msgid "flip argument must be an ndarray" msgstr "" #: py/objint.c msgid "float too big" msgstr "" #: shared-bindings/_stage/Text.c msgid "font must be 2048 bytes long" msgstr "" #: py/objstr.c msgid "format requires a dict" msgstr "" #: py/objdeque.c msgid "full" msgstr "" #: py/argcheck.c msgid "function does not take keyword arguments" msgstr "" #: py/argcheck.c #, c-format msgid "function expected at most %d arguments, got %d" msgstr "" #: py/bc.c py/objnamedtuple.c msgid "function got multiple values for argument '%q'" msgstr "" #: extmod/ulab/code/compare.c msgid "function is implemented for scalars and ndarrays only" msgstr "" #: py/argcheck.c #, c-format msgid "function missing %d required positional arguments" msgstr "" #: py/bc.c msgid "function missing keyword-only argument" msgstr "" #: py/bc.c msgid "function missing required keyword argument '%q'" msgstr "" #: py/bc.c #, c-format msgid "function missing required positional argument #%d" msgstr "" #: py/argcheck.c py/bc.c py/objnamedtuple.c #, c-format msgid "function takes %d positional arguments but %d were given" msgstr "" #: shared-bindings/time/__init__.c msgid "function takes exactly 9 arguments" msgstr "" #: py/objgenerator.c msgid "generator already executing" msgstr "" #: py/objgenerator.c msgid "generator ignored GeneratorExit" msgstr "" #: shared-bindings/_stage/Layer.c msgid "graphic must be 2048 bytes long" msgstr "" #: extmod/moduheapq.c msgid "heap must be a list" msgstr "" #: py/compile.c msgid "identifier redefined as global" msgstr "" #: py/compile.c msgid "identifier redefined as nonlocal" msgstr "" #: py/objstr.c msgid "incomplete format" msgstr "" #: py/objstr.c msgid "incomplete format key" msgstr "" #: extmod/modubinascii.c msgid "incorrect padding" msgstr "" #: extmod/ulab/code/ndarray.c msgid "index is out of bounds" msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c py/obj.c msgid "index out of range" msgstr "" #: py/obj.c msgid "indices must be integers" msgstr "" #: extmod/ulab/code/ndarray.c msgid "indices must be integers, slices, or Boolean lists" msgstr "" #: py/compile.c msgid "inline assembler must be a function" msgstr "" #: extmod/ulab/code/create.c msgid "input argument must be an integer or a 2-tuple" msgstr "" #: extmod/ulab/code/fft.c msgid "input array length must be power of 2" msgstr "" #: extmod/ulab/code/poly.c msgid "input data must be an iterable" msgstr "" #: extmod/ulab/code/linalg.c msgid "input matrix is asymmetric" msgstr "" #: extmod/ulab/code/linalg.c msgid "input matrix is singular" msgstr "" #: extmod/ulab/code/linalg.c msgid "input must be square matrix" msgstr "" #: extmod/ulab/code/numerical.c msgid "input must be tuple, list, range, or ndarray" msgstr "" #: extmod/ulab/code/poly.c msgid "input vectors must be of equal length" msgstr "" #: py/parsenum.c msgid "int() arg 2 must be >= 2 and <= 36" msgstr "" #: py/objstr.c msgid "integer required" msgstr "" #: shared-bindings/_bleio/Adapter.c #, c-format msgid "interval must be in range %s-%s" msgstr "" #: extmod/machine_i2c.c msgid "invalid I2C peripheral" msgstr "" #: extmod/machine_spi.c msgid "invalid SPI peripheral" msgstr "" #: lib/netutils/netutils.c msgid "invalid arguments" msgstr "" #: extmod/modussl_axtls.c msgid "invalid cert" msgstr "" #: extmod/uos_dupterm.c msgid "invalid dupterm index" msgstr "" #: extmod/modframebuf.c msgid "invalid format" msgstr "" #: py/objstr.c msgid "invalid format specifier" msgstr "" #: extmod/modussl_axtls.c msgid "invalid key" msgstr "" #: py/compile.c msgid "invalid micropython decorator" msgstr "" #: shared-bindings/random/__init__.c msgid "invalid step" msgstr "" #: py/compile.c py/parse.c msgid "invalid syntax" msgstr "" #: py/parsenum.c msgid "invalid syntax for integer" msgstr "" #: py/parsenum.c #, c-format msgid "invalid syntax for integer with base %d" msgstr "" #: py/parsenum.c msgid "invalid syntax for number" msgstr "" #: py/objtype.c msgid "issubclass() arg 1 must be a class" msgstr "" #: py/objtype.c msgid "issubclass() arg 2 must be a class or a tuple of classes" msgstr "" #: extmod/ulab/code/ndarray.c msgid "iterables are not of the same length" msgstr "" #: extmod/ulab/code/linalg.c msgid "iterations did not converge" msgstr "" #: py/objstr.c msgid "join expects a list of str/bytes objects consistent with self object" msgstr "" #: py/argcheck.c msgid "keyword argument(s) not yet implemented - use normal args instead" msgstr "" #: py/bc.c msgid "keywords must be strings" msgstr "" #: py/emitinlinethumb.c py/emitinlinextensa.c msgid "label '%q' not defined" msgstr "" #: py/compile.c msgid "label redefined" msgstr "" #: py/stream.c msgid "length argument not allowed for this type" msgstr "" #: shared-bindings/audiomixer/MixerVoice.c msgid "level must be between 0 and 1" msgstr "" #: py/objarray.c msgid "lhs and rhs should be compatible" msgstr "" #: py/emitnative.c msgid "local '%q' has type '%q' but source is '%q'" msgstr "" #: py/emitnative.c msgid "local '%q' used before type known" msgstr "" #: py/vm.c msgid "local variable referenced before assignment" msgstr "" #: py/objint.c msgid "long int not supported in this build" msgstr "" #: py/parse.c msgid "malformed f-string" msgstr "" #: shared-bindings/_stage/Layer.c msgid "map buffer too small" msgstr "" #: py/modmath.c shared-bindings/math/__init__.c msgid "math domain error" msgstr "" #: extmod/ulab/code/linalg.c msgid "matrix dimensions do not match" msgstr "" #: extmod/ulab/code/linalg.c msgid "matrix is not positive definite" msgstr "" #: ports/nrf/common-hal/_bleio/Characteristic.c #: ports/nrf/common-hal/_bleio/Descriptor.c #, c-format msgid "max_length must be 0-%d when fixed_length is %s" msgstr "" #: py/runtime.c msgid "maximum recursion depth exceeded" msgstr "" #: py/runtime.c #, c-format msgid "memory allocation failed, allocating %u bytes" msgstr "" #: py/runtime.c msgid "memory allocation failed, heap is locked" msgstr "" #: py/builtinimport.c msgid "module not found" msgstr "" #: extmod/ulab/code/poly.c msgid "more degrees of freedom than data points" msgstr "" #: py/compile.c msgid "multiple *x in assignment" msgstr "" #: py/objtype.c msgid "multiple bases have instance lay-out conflict" msgstr "" #: py/objtype.c msgid "multiple inheritance not supported" msgstr "" #: py/emitnative.c msgid "must raise an object" msgstr "" #: extmod/machine_spi.c msgid "must specify all of sck/mosi/miso" msgstr "" #: py/modbuiltins.c msgid "must use keyword argument for key function" msgstr "" #: extmod/ulab/code/numerical.c msgid "n must be between 0, and 9" msgstr "" #: py/runtime.c msgid "name '%q' is not defined" msgstr "" #: py/runtime.c msgid "name not defined" msgstr "" #: py/compile.c msgid "name reused for argument" msgstr "" #: py/emitnative.c msgid "native yield" msgstr "" #: py/runtime.c #, c-format msgid "need more than %d values to unpack" msgstr "" #: py/objint_longlong.c py/objint_mpz.c py/runtime.c msgid "negative power with no float support" msgstr "" #: py/objint_mpz.c py/runtime.c msgid "negative shift count" msgstr "" #: py/vm.c msgid "no active exception to reraise" msgstr "" #: shared-bindings/socket/__init__.c shared-module/network/__init__.c msgid "no available NIC" msgstr "" #: py/compile.c msgid "no binding for nonlocal found" msgstr "" #: py/builtinimport.c msgid "no module named '%q'" msgstr "" #: shared-bindings/displayio/FourWire.c shared-bindings/displayio/I2CDisplay.c #: shared-bindings/displayio/ParallelBus.c msgid "no reset pin available" msgstr "" #: py/runtime.c msgid "no such attribute" msgstr "" #: ports/nrf/common-hal/_bleio/Connection.c msgid "non-UUID found in service_uuids_whitelist" msgstr "" #: py/compile.c msgid "non-default argument follows default argument" msgstr "" #: extmod/modubinascii.c msgid "non-hex digit found" msgstr "" #: py/compile.c msgid "non-keyword arg after */**" msgstr "" #: py/compile.c msgid "non-keyword arg after keyword arg" msgstr "" #: shared-bindings/_bleio/UUID.c msgid "not a 128-bit UUID" msgstr "" #: py/objstr.c msgid "not all arguments converted during string formatting" msgstr "" #: py/objstr.c msgid "not enough arguments for format string" msgstr "" #: extmod/ulab/code/poly.c msgid "number of arguments must be 2, or 3" msgstr "" #: extmod/ulab/code/create.c msgid "number of points must be at least 2" msgstr "" #: py/obj.c #, c-format msgid "object '%s' is not a tuple or list" msgstr "" #: py/obj.c msgid "object does not support item assignment" msgstr "" #: py/obj.c msgid "object does not support item deletion" msgstr "" #: py/obj.c msgid "object has no len" msgstr "" #: py/obj.c msgid "object is not subscriptable" msgstr "" #: py/runtime.c msgid "object not an iterator" msgstr "" #: py/objtype.c py/runtime.c msgid "object not callable" msgstr "" #: py/sequence.c shared-bindings/displayio/Group.c msgid "object not in sequence" msgstr "" #: py/runtime.c msgid "object not iterable" msgstr "" #: py/obj.c #, c-format msgid "object of type '%s' has no len()" msgstr "" #: py/obj.c msgid "object with buffer protocol required" msgstr "" #: extmod/modubinascii.c msgid "odd-length string" msgstr "" #: py/objstr.c py/objstrunicode.c msgid "offset out of bounds" msgstr "" #: ports/nrf/common-hal/audiobusio/PDMIn.c msgid "only bit_depth=16 is supported" msgstr "" #: ports/nrf/common-hal/audiobusio/PDMIn.c msgid "only sample_rate=16000 is supported" msgstr "" #: py/objarray.c py/objstr.c py/objstrunicode.c py/objtuple.c #: shared-bindings/nvm/ByteArray.c msgid "only slices with step=1 (aka None) are supported" msgstr "" #: extmod/ulab/code/compare.c extmod/ulab/code/ndarray.c #: extmod/ulab/code/vectorise.c msgid "operands could not be broadcast together" msgstr "" #: extmod/ulab/code/numerical.c msgid "operation is not implemented on ndarrays" msgstr "" #: extmod/ulab/code/ndarray.c msgid "operation is not supported for given type" msgstr "" #: py/modbuiltins.c msgid "ord expects a character" msgstr "" #: py/modbuiltins.c #, c-format msgid "ord() expected a character, but string of length %d found" msgstr "" #: py/objint_mpz.c msgid "overflow converting long int to machine word" msgstr "" #: shared-bindings/_stage/Layer.c shared-bindings/_stage/Text.c msgid "palette must be 32 bytes long" msgstr "" #: shared-bindings/displayio/Palette.c msgid "palette_index should be an int" msgstr "" #: py/compile.c msgid "parameter annotation must be an identifier" msgstr "" #: py/emitinlinextensa.c msgid "parameters must be registers in sequence a2 to a5" msgstr "" #: py/emitinlinethumb.c msgid "parameters must be registers in sequence r0 to r3" msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "pixel coordinates out of bounds" msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "pixel value requires too many bits" msgstr "" #: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c msgid "pixel_shader must be displayio.Palette or displayio.ColorConverter" msgstr "" #: shared-module/vectorio/Polygon.c msgid "polygon can only be registered in one parent" msgstr "" #: ports/atmel-samd/common-hal/pulseio/PulseIn.c #: ports/cxd56/common-hal/pulseio/PulseIn.c #: ports/nrf/common-hal/pulseio/PulseIn.c #: ports/stm/common-hal/pulseio/PulseIn.c msgid "pop from an empty PulseIn" msgstr "" #: py/objset.c msgid "pop from an empty set" msgstr "" #: py/objlist.c msgid "pop from empty list" msgstr "" #: py/objdict.c msgid "popitem(): dictionary is empty" msgstr "" #: py/objint_mpz.c msgid "pow() 3rd argument cannot be 0" msgstr "" #: py/objint_mpz.c msgid "pow() with 3 arguments requires integers" msgstr "" #: extmod/modutimeq.c msgid "queue overflow" msgstr "" #: py/parse.c msgid "raw f-strings are not implemented" msgstr "" #: extmod/ulab/code/fft.c msgid "real and imaginary parts must be of equal length" msgstr "" #: py/builtinimport.c msgid "relative import" msgstr "" #: py/obj.c #, c-format msgid "requested length %d but object has length %d" msgstr "" #: py/compile.c msgid "return annotation must be an identifier" msgstr "" #: py/emitnative.c msgid "return expected '%q' but got '%q'" msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "rgb_pins[%d] duplicates another pin assignment" msgstr "" #: shared-bindings/rgbmatrix/RGBMatrix.c #, c-format msgid "rgb_pins[%d] is not on the same port as clock" msgstr "" #: extmod/ulab/code/ndarray.c msgid "right hand side must be an ndarray, or a scalar" msgstr "" #: py/objstr.c msgid "rsplit(None,n)" msgstr "" #: shared-bindings/audiocore/RawSample.c msgid "" "sample_source buffer must be a bytearray or array of type 'h', 'H', 'b' or " "'B'" msgstr "" #: ports/atmel-samd/common-hal/audiobusio/PDMIn.c msgid "sampling rate out of range" msgstr "" #: py/modmicropython.c msgid "schedule stack full" msgstr "" #: lib/utils/pyexec.c py/builtinimport.c msgid "script compilation not supported" msgstr "" #: extmod/ulab/code/ndarray.c msgid "shape must be a 2-tuple" msgstr "" #: py/objstr.c msgid "sign not allowed in string format specifier" msgstr "" #: py/objstr.c msgid "sign not allowed with integer format specifier 'c'" msgstr "" #: py/objstr.c msgid "single '}' encountered in format string" msgstr "" #: extmod/ulab/code/linalg.c msgid "size is defined for ndarrays only" msgstr "" #: shared-bindings/time/__init__.c msgid "sleep length must be non-negative" msgstr "" #: py/objslice.c py/sequence.c msgid "slice step cannot be zero" msgstr "" #: py/objint.c py/sequence.c msgid "small int overflow" msgstr "" #: main.c msgid "soft reboot\n" msgstr "" #: extmod/ulab/code/numerical.c msgid "sort argument must be an ndarray" msgstr "" #: py/objstr.c msgid "start/end indices" msgstr "" #: shared-bindings/displayio/Shape.c msgid "start_x should be an int" msgstr "" #: shared-bindings/random/__init__.c msgid "step must be non-zero" msgstr "" #: shared-bindings/busio/UART.c msgid "stop must be 1 or 2" msgstr "" #: shared-bindings/random/__init__.c msgid "stop not reachable from start" msgstr "" #: py/stream.c msgid "stream operation not supported" msgstr "" #: py/objstrunicode.c msgid "string index out of range" msgstr "" #: py/objstrunicode.c #, c-format msgid "string indices must be integers, not %s" msgstr "" #: py/stream.c msgid "string not supported; use bytes or bytearray" msgstr "" #: extmod/moductypes.c msgid "struct: cannot index" msgstr "" #: extmod/moductypes.c msgid "struct: index out of range" msgstr "" #: extmod/moductypes.c msgid "struct: no fields" msgstr "" #: py/objstr.c msgid "substring not found" msgstr "" #: py/compile.c msgid "super() can't find self" msgstr "" #: extmod/modujson.c msgid "syntax error in JSON" msgstr "" #: extmod/moductypes.c msgid "syntax error in uctypes descriptor" msgstr "" #: shared-bindings/touchio/TouchIn.c msgid "threshold must be in the range 0-65536" msgstr "" #: shared-bindings/time/__init__.c msgid "time.struct_time() takes a 9-sequence" msgstr "" #: shared-bindings/busio/UART.c msgid "timeout must be 0.0-100.0 seconds" msgstr "" #: shared-bindings/_bleio/CharacteristicBuffer.c msgid "timeout must be >= 0.0" msgstr "" #: shared-bindings/time/__init__.c msgid "timestamp out of range for platform time_t" msgstr "" #: shared-module/struct/__init__.c msgid "too many arguments provided with the given format" msgstr "" #: extmod/ulab/code/ndarray.c msgid "too many indices" msgstr "" #: py/runtime.c #, c-format msgid "too many values to unpack (expected %d)" msgstr "" #: extmod/ulab/code/linalg.c py/objstr.c msgid "tuple index out of range" msgstr "" #: py/obj.c msgid "tuple/list has wrong length" msgstr "" #: shared-bindings/_pixelbuf/PixelBuf.c msgid "tuple/list required on RHS" msgstr "" #: ports/atmel-samd/common-hal/busio/UART.c #: ports/mimxrt10xx/common-hal/busio/UART.c ports/nrf/common-hal/busio/UART.c #: shared-bindings/busio/UART.c msgid "tx and rx cannot both be None" msgstr "" #: py/objtype.c msgid "type '%q' is not an acceptable base type" msgstr "" #: py/objtype.c msgid "type is not an acceptable base type" msgstr "" #: py/runtime.c msgid "type object '%q' has no attribute '%q'" msgstr "" #: py/objtype.c msgid "type takes 1 or 3 arguments" msgstr "" #: py/objint_longlong.c msgid "ulonglong too large" msgstr "" #: py/emitnative.c msgid "unary op %q not implemented" msgstr "" #: py/parse.c msgid "unexpected indent" msgstr "" #: py/bc.c msgid "unexpected keyword argument" msgstr "" #: py/bc.c py/objnamedtuple.c msgid "unexpected keyword argument '%q'" msgstr "" #: py/lexer.c msgid "unicode name escapes" msgstr "" #: py/parse.c msgid "unindent does not match any outer indentation level" msgstr "" #: py/objstr.c #, c-format msgid "unknown conversion specifier %c" msgstr "" #: py/objstr.c #, c-format msgid "unknown format code '%c' for object of type '%s'" msgstr "" #: py/compile.c msgid "unknown type" msgstr "" #: py/emitnative.c msgid "unknown type '%q'" msgstr "" #: py/objstr.c msgid "unmatched '{' in format" msgstr "" #: py/objtype.c py/runtime.c msgid "unreadable attribute" msgstr "" #: shared-bindings/displayio/TileGrid.c shared-bindings/vectorio/VectorShape.c #: shared-module/vectorio/Polygon.c msgid "unsupported %q type" msgstr "" #: py/emitinlinethumb.c #, c-format msgid "unsupported Thumb instruction '%s' with %d arguments" msgstr "" #: py/emitinlinextensa.c #, c-format msgid "unsupported Xtensa instruction '%s' with %d arguments" msgstr "" #: py/objstr.c #, c-format msgid "unsupported format character '%c' (0x%x) at index %d" msgstr "" #: py/runtime.c msgid "unsupported type for %q: '%s'" msgstr "" #: py/runtime.c msgid "unsupported type for operator" msgstr "" #: py/runtime.c msgid "unsupported types for %q: '%s', '%s'" msgstr "" #: py/objint.c #, c-format msgid "value must fit in %d byte(s)" msgstr "" #: shared-bindings/displayio/Bitmap.c msgid "value_count must be > 0" msgstr "" #: shared-bindings/_bleio/Adapter.c msgid "window must be <= interval" msgstr "" #: extmod/ulab/code/linalg.c msgid "wrong argument type" msgstr "" #: extmod/ulab/code/ndarray.c msgid "wrong index type" msgstr "" #: py/objstr.c msgid "wrong number of arguments" msgstr "" #: py/runtime.c msgid "wrong number of values to unpack" msgstr "" #: extmod/ulab/code/ndarray.c msgid "wrong operand type" msgstr "" #: shared-module/displayio/Shape.c msgid "x value out of bounds" msgstr "" #: shared-bindings/displayio/Shape.c msgid "y should be an int" msgstr "" #: shared-module/displayio/Shape.c msgid "y value out of bounds" msgstr "" #: py/objrange.c msgid "zero step" msgstr ""