/* * This file is part of the MicroPython project, http://micropython.org/ * * The MIT License (MIT) * * Copyright (c) 2019 Dan Halbert for Adafruit Industries * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell * copies of the Software, and to permit persons to whom the Software is * furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ // This file contains settings that are common across CircuitPython ports, to make // sure that the same feature set and settings are used, such as in atmel-samd // and nrf. #ifndef __INCLUDED_MPCONFIG_CIRCUITPY_H #define __INCLUDED_MPCONFIG_CIRCUITPY_H #include #include // This is CircuitPython. // Always 1: defined in circuitpy_mpconfig.mk // #define CIRCUITPY (1) // REPR_C encodes qstrs, 31-bit ints, and 30-bit floats in a single 32-bit word. #ifndef MICROPY_OBJ_REPR #define MICROPY_OBJ_REPR (MICROPY_OBJ_REPR_C) #endif // options to control how MicroPython is built // TODO(tannewt): Reduce this number if we want the REPL to function under 512 // free bytes. // #define MICROPY_ALLOC_PARSE_RULE_INIT (64) // These critical-section macros are used only a few places in MicroPython, but // we need to provide actual implementations. extern void common_hal_mcu_disable_interrupts(void); extern void common_hal_mcu_enable_interrupts(void); #define MICROPY_BEGIN_ATOMIC_SECTION() (common_hal_mcu_disable_interrupts(), 0) #define MICROPY_END_ATOMIC_SECTION(state) ((void)state, common_hal_mcu_enable_interrupts()) // MicroPython-only options not used by CircuitPython, but present in various files // inherited from MicroPython, especially in extmod/ #define MICROPY_ENABLE_DYNRUNTIME (0) #define MICROPY_PY_BLUETOOTH (0) #define MICROPY_PY_LWIP_SLIP (0) #define MICROPY_PY_OS_DUPTERM (0) #define MICROPY_ROM_TEXT_COMPRESSION (0) #define MICROPY_VFS_LFS1 (0) #define MICROPY_VFS_LFS2 (0) // Sorted alphabetically for easy finding. // // default is 128; consider raising to reduce fragmentation. #define MICROPY_ALLOC_PARSE_CHUNK_INIT (16) // default is 512. Longest path in .py bundle as of June 6th, 2023 is 73 characters. #define MICROPY_ALLOC_PATH_MAX (96) #define MICROPY_CAN_OVERRIDE_BUILTINS (1) #define MICROPY_COMP_CONST (1) #define MICROPY_COMP_DOUBLE_TUPLE_ASSIGN (1) #define MICROPY_COMP_MODULE_CONST (1) #define MICROPY_COMP_TRIPLE_TUPLE_ASSIGN (0) #define MICROPY_DEBUG_PRINTERS (0) #define MICROPY_EMIT_INLINE_THUMB (CIRCUITPY_ENABLE_MPY_NATIVE) #define MICROPY_EMIT_THUMB (CIRCUITPY_ENABLE_MPY_NATIVE) #define MICROPY_EMIT_X64 (0) #define MICROPY_ENABLE_DOC_STRING (0) #define MICROPY_ENABLE_FINALISER (1) #define MICROPY_ENABLE_GC (1) #define MICROPY_ENABLE_PYSTACK (1) #define MICROPY_TRACKED_ALLOC (CIRCUITPY_SSL_MBEDTLS) #define MICROPY_ENABLE_SOURCE_LINE (1) #define MICROPY_EPOCH_IS_1970 (1) #define MICROPY_ERROR_REPORTING (MICROPY_ERROR_REPORTING_NORMAL) #define MICROPY_FLOAT_HIGH_QUALITY_HASH (0) #define MICROPY_FLOAT_IMPL (MICROPY_FLOAT_IMPL_FLOAT) #define MICROPY_GC_ALLOC_THRESHOLD (0) #define MICROPY_HELPER_LEXER_UNIX (0) #define MICROPY_HELPER_REPL (1) #define MICROPY_KBD_EXCEPTION (1) #define MICROPY_MEM_STATS (0) #define MICROPY_MODULE_BUILTIN_INIT (1) #define MICROPY_NONSTANDARD_TYPECODES (0) #define MICROPY_OPT_COMPUTED_GOTO (1) #define MICROPY_OPT_COMPUTED_GOTO_SAVE_SPACE (CIRCUITPY_COMPUTED_GOTO_SAVE_SPACE) #define MICROPY_OPT_LOAD_ATTR_FAST_PATH (CIRCUITPY_OPT_LOAD_ATTR_FAST_PATH) #define MICROPY_OPT_MAP_LOOKUP_CACHE (CIRCUITPY_OPT_MAP_LOOKUP_CACHE) #define MICROPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE (CIRCUITPY_OPT_CACHE_MAP_LOOKUP_IN_BYTECODE) #define MICROPY_PERSISTENT_CODE_LOAD (1) #define MICROPY_PY_ARRAY (CIRCUITPY_ARRAY) #define MICROPY_PY_ARRAY_SLICE_ASSIGN (1) #define MICROPY_PY_ATTRTUPLE (1) #define MICROPY_PY_BUILTINS_BYTEARRAY (1) #define MICROPY_PY_BUILTINS_BYTES_HEX (1) #define MICROPY_PY_BUILTINS_ENUMERATE (1) #define MICROPY_PY_BUILTINS_FILTER (1) #define MICROPY_PY_BUILTINS_HELP (1) #define MICROPY_PY_BUILTINS_HELP_MODULES (1) #define MICROPY_PY_BUILTINS_INPUT (1) #define MICROPY_PY_BUILTINS_MEMORYVIEW (1) #define MICROPY_PY_BUILTINS_MIN_MAX (1) #define MICROPY_PY_BUILTINS_PROPERTY (1) #define MICROPY_PY_BUILTINS_REVERSED (1) #define MICROPY_PY_BUILTINS_ROUND_INT (1) #define MICROPY_PY_BUILTINS_SET (1) #define MICROPY_PY_BUILTINS_SLICE (1) #define MICROPY_PY_BUILTINS_SLICE_ATTRS (1) #define MICROPY_PY_BUILTINS_SLICE_INDICES (1) #define MICROPY_PY_BUILTINS_STR_UNICODE (1) #define MICROPY_PY_BINASCII (CIRCUITPY_BINASCII) #define MICROPY_PY_CMATH (0) #define MICROPY_PY_COLLECTIONS (CIRCUITPY_COLLECTIONS) #define MICROPY_PY_DESCRIPTORS (1) // In extmod #define MICROPY_PY_ERRNO (CIRCUITPY_ERRNO) // Uses about 80 bytes. #define MICROPY_PY_ERRNO_ERRORCODE (CIRCUITPY_ERRNO) #define MICROPY_PY_GC (1) // Supplanted by shared-bindings/math #define MICROPY_PY_IO (CIRCUITPY_IO) // In extmod #define MICROPY_PY_JSON (CIRCUITPY_JSON) #define MICROPY_PY_MATH (0) #define MICROPY_PY_MICROPYTHON_MEM_INFO (0) // Supplanted by shared-bindings/random #define MICROPY_PY_RANDOM (0) #define MICROPY_PY_RANDOM_EXTRA_FUNCS (0) #define MICROPY_PY_RE (CIRCUITPY_RE) // Supplanted by shared-bindings/struct #define MICROPY_PY_STRUCT (0) #define MICROPY_PY_SYS (CIRCUITPY_SYS) #define MICROPY_PY_SYS_MAXSIZE (1) #define MICROPY_PY_SYS_STDFILES (1) #define MICROPY_PY___FILE__ (1) #define MICROPY_QSTR_BYTES_IN_HASH (1) #define MICROPY_REPL_AUTO_INDENT (1) #define MICROPY_REPL_EVENT_DRIVEN (0) #define CIRCUITPY_SETTABLE_PYSTACK (1) #define MICROPY_STACK_CHECK (1) #define MICROPY_STREAMS_NON_BLOCK (1) #ifndef MICROPY_USE_INTERNAL_PRINTF #define MICROPY_USE_INTERNAL_PRINTF (1) #endif // fatfs configuration used in ffconf.h // // 1 = SFN/ANSI 437=LFN/U.S.(OEM) #define MICROPY_FATFS_ENABLE_LFN (1) // Code page is ignored because unicode is enabled. // Don't use parens on the value below because it gets combined with a prefix in // the preprocessor. #define MICROPY_FATFS_LFN_CODE_PAGE 437 #define MICROPY_FATFS_USE_LABEL (1) #define MICROPY_FATFS_RPATH (2) #define MICROPY_FATFS_MULTI_PARTITION (1) #define MICROPY_FATFS_LFN_UNICODE 2 // UTF-8 // Only enable this if you really need it. It allocates a byte cache of this size. // #define MICROPY_FATFS_MAX_SS (4096) #define FILESYSTEM_BLOCK_SIZE (512) #define MICROPY_VFS (1) #define MICROPY_VFS_FAT (MICROPY_VFS) #define MICROPY_READER_VFS (MICROPY_VFS) // type definitions for the specific machine #define BYTES_PER_WORD (4) #define MICROPY_MAKE_POINTER_CALLABLE(p) ((void *)((mp_uint_t)(p) | 1)) // Track stack usage. Expose results via ustack module. #define MICROPY_MAX_STACK_USAGE (0) #define UINT_FMT "%u" #define INT_FMT "%d" #ifdef __LP64__ typedef long mp_int_t; // must be pointer size typedef unsigned long mp_uint_t; // must be pointer size #else // These are definitions for machines where sizeof(int) == sizeof(void*), // regardless of actual size. typedef int mp_int_t; // must be pointer size typedef unsigned int mp_uint_t; // must be pointer size #endif #if __GNUC__ >= 10 // on recent gcc versions we can check that this is so _Static_assert(sizeof(mp_int_t) == sizeof(void *)); _Static_assert(sizeof(mp_uint_t) == sizeof(void *)); #endif typedef long mp_off_t; #define MP_PLAT_PRINT_STRN(str, len) mp_hal_stdout_tx_strn_cooked(str, len) #define mp_type_fileio mp_type_vfs_fat_fileio #define mp_type_textio mp_type_vfs_fat_textio #define mp_builtin_open_obj mp_vfs_open_obj // extra built in names to add to the global namespace // Not indented so as not to confused the editor. #define MICROPY_PORT_BUILTINS \ { MP_OBJ_NEW_QSTR(MP_QSTR_help), (mp_obj_t)&mp_builtin_help_obj }, \ { MP_OBJ_NEW_QSTR(MP_QSTR_input), (mp_obj_t)&mp_builtin_input_obj }, \ { MP_OBJ_NEW_QSTR(MP_QSTR_open), (mp_obj_t)&mp_builtin_open_obj }, \ ////////////////////////////////////////////////////////////////////////////////////////////////// // board-specific definitions, which control and may override definitions below. #include "mpconfigboard.h" // Turning off FULL_BUILD removes some functionality to reduce flash size on tiny SAMD21s #define MICROPY_BUILTIN_METHOD_CHECK_SELF_ARG (CIRCUITPY_FULL_BUILD) #ifndef MICROPY_CPYTHON_COMPAT #define MICROPY_CPYTHON_COMPAT (CIRCUITPY_FULL_BUILD) #endif #ifndef MICROPY_CPYTHON_EXCEPTION_CHAIN #define MICROPY_CPYTHON_EXCEPTION_CHAIN (CIRCUITPY_FULL_BUILD) #endif #define MICROPY_PY_BUILTINS_POW3 (CIRCUITPY_BUILTINS_POW3) #define MICROPY_PY_FSTRINGS (1) #define MICROPY_MODULE_WEAK_LINKS (0) #define MICROPY_PY_ALL_SPECIAL_METHODS (CIRCUITPY_FULL_BUILD) #ifndef MICROPY_PY_BUILTINS_COMPLEX #define MICROPY_PY_BUILTINS_COMPLEX (CIRCUITPY_FULL_BUILD) #endif #define MICROPY_PY_BUILTINS_FROZENSET (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_STR_CENTER (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_STR_PARTITION (CIRCUITPY_FULL_BUILD) #define MICROPY_PY_BUILTINS_STR_SPLITLINES (CIRCUITPY_FULL_BUILD) #ifndef MICROPY_PY_COLLECTIONS_ORDEREDDICT #define MICROPY_PY_COLLECTIONS_ORDEREDDICT (CIRCUITPY_FULL_BUILD) #endif #ifndef MICROPY_PY_COLLECTIONS_DEQUE #define MICROPY_PY_COLLECTIONS_DEQUE (CIRCUITPY_FULL_BUILD) #endif #define MICROPY_PY_RE_MATCH_GROUPS (CIRCUITPY_RE) #define MICROPY_PY_RE_MATCH_SPAN_START_END (CIRCUITPY_RE) #define MICROPY_PY_RE_SUB (CIRCUITPY_RE) #define CIRCUITPY_MICROPYTHON_ADVANCED (0) #ifndef MICROPY_FATFS_EXFAT #define MICROPY_FATFS_EXFAT (CIRCUITPY_FULL_BUILD) #endif #ifndef MICROPY_FATFS_MKFS_FAT32 #define MICROPY_FATFS_MKFS_FAT32 (CIRCUITPY_FULL_BUILD) #endif // LONGINT_IMPL_xxx are defined in the Makefile. // #ifdef LONGINT_IMPL_NONE #define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_NONE) #endif #ifdef LONGINT_IMPL_MPZ #define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_MPZ) #define MP_SSIZE_MAX (0x7fffffff) #endif #ifdef LONGINT_IMPL_LONGLONG #define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_LONGLONG) #define MP_SSIZE_MAX (0x7fffffff) #endif #ifndef MICROPY_PY_REVERSE_SPECIAL_METHODS #define MICROPY_PY_REVERSE_SPECIAL_METHODS (CIRCUITPY_ULAB || CIRCUITPY_FULL_BUILD) #endif #if INTERNAL_FLASH_FILESYSTEM == 0 && QSPI_FLASH_FILESYSTEM == 0 && SPI_FLASH_FILESYSTEM == 0 && !DISABLE_FILESYSTEM #error No *_FLASH_FILESYSTEM set! #endif // Default board buses. #ifndef CIRCUITPY_BOARD_I2C #if defined(DEFAULT_I2C_BUS_SCL) && defined(DEFAULT_I2C_BUS_SDA) #define CIRCUITPY_BOARD_I2C (1) #define CIRCUITPY_BOARD_I2C_PIN {{.scl = DEFAULT_I2C_BUS_SCL, .sda = DEFAULT_I2C_BUS_SDA}} #else #define CIRCUITPY_BOARD_I2C (0) #endif #endif #ifndef CIRCUITPY_BOARD_SPI #if defined(DEFAULT_SPI_BUS_SCK) && defined(DEFAULT_SPI_BUS_MOSI) && defined(DEFAULT_SPI_BUS_MISO) #define CIRCUITPY_BOARD_SPI (1) #define CIRCUITPY_BOARD_SPI_PIN {{.clock = DEFAULT_SPI_BUS_SCK, .mosi = DEFAULT_SPI_BUS_MOSI, .miso = DEFAULT_SPI_BUS_MISO}} #else #define CIRCUITPY_BOARD_SPI (0) #endif #endif #ifndef CIRCUITPY_BOARD_UART #if defined(DEFAULT_UART_BUS_TX) && defined(DEFAULT_UART_BUS_RX) #define CIRCUITPY_BOARD_UART (1) #define CIRCUITPY_BOARD_UART_PIN {{.tx = DEFAULT_UART_BUS_TX, .rx = DEFAULT_UART_BUS_RX}} #else #define CIRCUITPY_BOARD_UART (0) #endif #endif #if MICROPY_PY_ASYNC_AWAIT && !CIRCUITPY_TRACEBACK #error CIRCUITPY_ASYNCIO requires CIRCUITPY_TRACEBACK #endif #if defined(CIRCUITPY_CONSOLE_UART_RX) || defined(CIRCUITPY_CONSOLE_UART_TX) #if !(defined(CIRCUITPY_CONSOLE_UART_RX) && defined(CIRCUITPY_CONSOLE_UART_TX)) #error Both CIRCUITPY_CONSOLE_UART_RX and CIRCUITPY_CONSOLE_UART_TX must be defined if one is defined. #endif #define CIRCUITPY_CONSOLE_UART (1) #ifndef CIRCUITPY_CONSOLE_UART_BAUDRATE #define CIRCUITPY_CONSOLE_UART_BAUDRATE (115200) #endif #else #define CIRCUITPY_CONSOLE_UART (0) #endif // These CIRCUITPY_xxx values should all be defined in the *.mk files as being on or off. // So if any are not defined in *.mk, they'll throw an error here. #if CIRCUITPY_DISPLAYIO #ifndef CIRCUITPY_DISPLAY_LIMIT #define CIRCUITPY_DISPLAY_LIMIT (1) #endif // Framebuffer area size in bytes. Rounded down to power of four for alignment. #ifndef CIRCUITPY_DISPLAY_AREA_BUFFER_SIZE #define CIRCUITPY_DISPLAY_AREA_BUFFER_SIZE (128) #endif #else #define CIRCUITPY_DISPLAY_LIMIT (0) #define CIRCUITPY_DISPLAY_AREA_BUFFER_SIZE (0) #endif // This is not a top-level module; it's microcontroller.nvm. #if CIRCUITPY_NVM extern const struct _mp_obj_module_t nvm_module; #endif #ifndef ULAB_SUPPORTS_COMPLEX #define ULAB_SUPPORTS_COMPLEX (0) #endif #if CIRCUITPY_ULAB // ulab requires reverse special methods #if defined(MICROPY_PY_REVERSE_SPECIAL_METHODS) && !MICROPY_PY_REVERSE_SPECIAL_METHODS #error "ulab requires MICROPY_PY_REVERSE_SPECIAL_METHODS" #endif #endif // Define certain native modules with weak links so they can be replaced with Python // implementations. This list may grow over time. #define MICROPY_PORT_BUILTIN_MODULE_WEAK_LINKS // Native modules that are weak links can be accessed directly // by prepending their name with an underscore. This list should correspond to // MICROPY_PORT_BUILTIN_MODULE_WEAK_LINKS, assuming you want the native modules // to be accessible when overridden. #define MICROPY_PORT_BUILTIN_MODULE_ALT_NAMES // This is an inclusive list that should correspond to the CIRCUITPY_XXX list above, // including dependencies. // Some of these definitions will be blank depending on what is turned on and off. // Some are omitted because they're in MICROPY_PORT_BUILTIN_MODULE_WEAK_LINKS above. #define MICROPY_PORT_BUILTIN_MODULES_STRONG_LINKS // If weak links are enabled, just include strong links in the main list of modules, // and also include the underscore alternate names. #if MICROPY_MODULE_WEAK_LINKS #define MICROPY_PORT_BUILTIN_MODULES \ MICROPY_PORT_BUILTIN_MODULES_STRONG_LINKS \ MICROPY_PORT_BUILTIN_MODULE_ALT_NAMES #else // If weak links are disabled, included both strong and potentially weak lines #define MICROPY_PORT_BUILTIN_MODULES \ MICROPY_PORT_BUILTIN_MODULES_STRONG_LINKS \ MICROPY_PORT_BUILTIN_MODULE_WEAK_LINKS #endif // We need to provide a declaration/definition of alloca() #include #define MP_STATE_PORT MP_STATE_VM // From supervisor/memory.c struct _supervisor_allocation_node; void background_callback_run_all(void); #define RUN_BACKGROUND_TASKS (background_callback_run_all()) #define MICROPY_VM_HOOK_LOOP RUN_BACKGROUND_TASKS; #define MICROPY_VM_HOOK_RETURN RUN_BACKGROUND_TASKS; // CIRCUITPY_AUTORELOAD_DELAY_MS = 0 will completely disable autoreload. #ifndef CIRCUITPY_AUTORELOAD_DELAY_MS #define CIRCUITPY_AUTORELOAD_DELAY_MS 750 #endif #ifndef CIRCUITPY_FILESYSTEM_FLUSH_INTERVAL_MS #define CIRCUITPY_FILESYSTEM_FLUSH_INTERVAL_MS 1000 #endif #ifndef CIRCUITPY_PYSTACK_SIZE #define CIRCUITPY_PYSTACK_SIZE 1536 #endif // Wait this long before sleeping immediately after startup, to see if we are connected via USB or BLE. #ifndef CIRCUITPY_WORKFLOW_CONNECTION_SLEEP_DELAY #define CIRCUITPY_WORKFLOW_CONNECTION_SLEEP_DELAY 5 #endif #ifndef CIRCUITPY_PROCESSOR_COUNT #define CIRCUITPY_PROCESSOR_COUNT (1) #endif #ifndef CIRCUITPY_STATUS_LED_POWER_INVERTED #define CIRCUITPY_STATUS_LED_POWER_INVERTED (0) #endif #define CIRCUITPY_BOOT_OUTPUT_FILE "/boot_out.txt" #ifndef CIRCUITPY_BOOT_COUNTER #define CIRCUITPY_BOOT_COUNTER 0 #endif #if !defined(CIRCUITPY_INTERNAL_NVM_SIZE) && CIRCUITPY_BOOT_COUNTER != 0 #error "boot counter requires CIRCUITPY_NVM enabled" #endif #define CIRCUITPY_VERBOSE_BLE 0 // Display the Blinka logo in the REPL on displayio displays. #ifndef CIRCUITPY_REPL_LOGO #define CIRCUITPY_REPL_LOGO (1) #endif // USB settings // Debug level for TinyUSB. Only outputs over debug UART so it doesn't cause // additional USB logging. #ifndef CIRCUITPY_DEBUG_TINYUSB #define CIRCUITPY_DEBUG_TINYUSB 0 #endif #ifndef CIRCUITPY_USB_DEVICE_INSTANCE #define CIRCUITPY_USB_DEVICE_INSTANCE 0 #endif #ifndef CIRCUITPY_USB_HOST_INSTANCE #define CIRCUITPY_USB_HOST_INSTANCE -1 #endif // If the port requires certain USB endpoint numbers, define these in mpconfigport.h. #ifndef USB_CDC_EP_NUM_NOTIFICATION #define USB_CDC_EP_NUM_NOTIFICATION (0) #endif #ifndef USB_CDC_EP_NUM_DATA_OUT #define USB_CDC_EP_NUM_DATA_OUT (0) #endif #ifndef USB_CDC_EP_NUM_DATA_IN #define USB_CDC_EP_NUM_DATA_IN (0) #endif #ifndef USB_CDC2_EP_NUM_NOTIFICATION #define USB_CDC2_EP_NUM_NOTIFICATION (0) #endif #ifndef USB_CDC2_EP_NUM_DATA_OUT #define USB_CDC2_EP_NUM_DATA_OUT (0) #endif #ifndef USB_CDC2_EP_NUM_DATA_IN #define USB_CDC2_EP_NUM_DATA_IN (0) #endif #ifndef USB_MSC_EP_NUM_OUT #define USB_MSC_EP_NUM_OUT (0) #endif #ifndef USB_MSC_EP_NUM_IN #define USB_MSC_EP_NUM_IN (0) #endif #ifndef USB_HID_EP_NUM_OUT #define USB_HID_EP_NUM_OUT (0) #endif #ifndef USB_HID_EP_NUM_IN #define USB_HID_EP_NUM_IN (0) #endif // The most complicated device currently known of is the head and eye tracker, which requires 5 // report ids. // https://usb.org/sites/default/files/hutrr74_-_usage_page_for_head_and_eye_trackers_0.pdf // The default descriptors only use 1, so that is the minimum. #ifndef CIRCUITPY_USB_HID_MAX_REPORT_IDS_PER_DESCRIPTOR #define CIRCUITPY_USB_HID_MAX_REPORT_IDS_PER_DESCRIPTOR (6) #elif CIRCUITPY_USB_HID_MAX_REPORT_IDS_PER_DESCRIPTOR < 1 #error "CIRCUITPY_USB_HID_MAX_REPORT_IDS_PER_DESCRIPTOR must be at least 1" #endif #ifndef CIRCUITPY_PORT_NUM_SUPERVISOR_ALLOCATIONS #define CIRCUITPY_PORT_NUM_SUPERVISOR_ALLOCATIONS (0) #endif #ifndef USB_MIDI_EP_NUM_OUT #define USB_MIDI_EP_NUM_OUT (0) #endif #ifndef USB_MIDI_EP_NUM_IN #define USB_MIDI_EP_NUM_IN (0) #endif #ifndef MICROPY_WRAP_MP_MAP_LOOKUP #define MICROPY_WRAP_MP_MAP_LOOKUP PLACE_IN_ITCM #endif #ifndef MICROPY_WRAP_MP_BINARY_OP #define MICROPY_WRAP_MP_BINARY_OP PLACE_IN_ITCM #endif #ifndef MICROPY_WRAP_MP_EXECUTE_BYTECODE #define MICROPY_WRAP_MP_EXECUTE_BYTECODE PLACE_IN_ITCM #endif #ifndef MICROPY_WRAP_MP_LOAD_GLOBAL #define MICROPY_WRAP_MP_LOAD_GLOBAL PLACE_IN_ITCM #endif #ifndef MICROPY_WRAP_MP_LOAD_NAME #define MICROPY_WRAP_MP_LOAD_NAME PLACE_IN_ITCM #endif #ifndef MICROPY_WRAP_MP_OBJ_GET_TYPE #define MICROPY_WRAP_MP_OBJ_GET_TYPE PLACE_IN_ITCM #endif #ifndef CIRCUITPY_DIGITALIO_HAVE_INPUT_ONLY #define CIRCUITPY_DIGITALIO_HAVE_INPUT_ONLY (0) #endif #ifndef CIRCUITPY_DIGITALIO_HAVE_INVALID_PULL #define CIRCUITPY_DIGITALIO_HAVE_INVALID_PULL (0) #endif #ifndef CIRCUITPY_DIGITALIO_HAVE_INVALID_DRIVE_MODE #define CIRCUITPY_DIGITALIO_HAVE_INVALID_DRIVE_MODE (0) #endif // Align the internal sector buffer. Useful when it is passed into TinyUSB for // loads. #ifndef MICROPY_FATFS_WINDOW_ALIGNMENT #define MICROPY_FATFS_WINDOW_ALIGNMENT CIRCUITPY_TUSB_MEM_ALIGN #endif #define FF_FS_CASE_INSENSITIVE_COMPARISON_ASCII_ONLY (1) #define FF_FS_MAKE_VOLID (1) #define MICROPY_PY_OPTIMIZE_PROPERTY_FLASH_SIZE (CIRCUITPY_OPTIMIZE_PROPERTY_FLASH_SIZE) #endif // __INCLUDED_MPCONFIG_CIRCUITPY_H