#define CERB40 #define MICROPY_HW_BOARD_NAME "Cerb40" #define MICROPY_HW_MCU_NAME "STM32F405RG" #define MICROPY_PY_SYS_PLATFORM "pyboard" #define MICROPY_HW_HAS_SWITCH (0) #define MICROPY_HW_HAS_SDCARD (0) #define MICROPY_HW_HAS_MMA7660 (0) #define MICROPY_HW_HAS_LIS3DSH (0) #define MICROPY_HW_HAS_LCD (0) #define MICROPY_HW_ENABLE_RNG (1) #define MICROPY_HW_ENABLE_RTC (1) #define MICROPY_HW_ENABLE_TIMER (1) #define MICROPY_HW_ENABLE_SERVO (0) #define MICROPY_HW_ENABLE_DAC (1) #define MICROPY_HW_ENABLE_SPI1 (1) #define MICROPY_HW_ENABLE_SPI2 (0) #define MICROPY_HW_ENABLE_SPI3 (1) #define MICROPY_HW_ENABLE_CAN (1) // HSE is 12MHz #define MICROPY_HW_CLK_PLLM (12) #define MICROPY_HW_CLK_PLLN (336) #define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2) #define MICROPY_HW_CLK_PLLQ (7) // UART config #define MICROPY_HW_UART1_PORT (GPIOA) #define MICROPY_HW_UART1_PINS (GPIO_PIN_9 | GPIO_PIN_10) #define MICROPY_HW_UART2_PORT (GPIOA) #define MICROPY_HW_UART2_PINS (GPIO_PIN_2 | GPIO_PIN_3) #define MICROPY_HW_UART2_RTS (GPIO_PIN_1) #define MICROPY_HW_UART2_CTS (GPIO_PIN_0) #define MICROPY_HW_UART3_PORT (GPIOD) #define MICROPY_HW_UART3_PINS (GPIO_PIN_8 | GPIO_PIN_9) #define MICROPY_HW_UART3_RTS (GPIO_PIN_12) #define MICROPY_HW_UART3_CTS (GPIO_PIN_11) #define MICROPY_HW_UART4_PORT (GPIOA) #define MICROPY_HW_UART4_PINS (GPIO_PIN_0 | GPIO_PIN_1) #define MICROPY_HW_UART5_TX_PORT (GPIOC) #define MICROPY_HW_UART5_TX_PIN (GPIO_PIN_12) #define MICROPY_HW_UART5_RX_PORT (GPIOD) #define MICROPY_HW_UART5_RX_PIN (GPIO_PIN_2) #define MICROPY_HW_UART6_PORT (GPIOC) #define MICROPY_HW_UART6_PINS (GPIO_PIN_6 | GPIO_PIN_7) // I2C busses #define MICROPY_HW_I2C1_SCL (pin_B6) #define MICROPY_HW_I2C1_SDA (pin_B7) #define MICROPY_HW_I2C2_SCL (pin_B10) #define MICROPY_HW_I2C2_SDA (pin_B11) // The Cerb40 has No LEDs // The Cerb40 has No SDCard // USB config //#define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9) //#define MICROPY_HW_USB_OTG_ID_PIN (pin_A10)