/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
 * Copyright (c) 2019 Lucian Copeland for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#include <stdint.h>
#include "supervisor/port.h"
#include "supervisor/shared/tick.h"
#include "boards/board.h"
#include "irq.h"
#include "csr.h"

// Global millisecond tick count. 1024 per second because most RTCs are clocked with 32.768khz
// crystals.
volatile uint64_t raw_ticks = 0;
volatile int subsecond = 0;
__attribute__((section(".ramtext")))
void SysTick_Handler(void) {
    timer0_ev_pending_write(1);
    raw_ticks += 1;
    subsecond += 1;
    // We track subsecond ticks so that we can increment raw_ticks one extra every 40 ms. We do this
    // every 40 except 0 to make it 24 increments and not 25.
    if (subsecond == 1000) {
        subsecond = 0;
    } else if (subsecond % 40 == 0) {
        raw_ticks += 1;
    }
    supervisor_tick();
}

static void tick_init(void) {
    int t;

    timer0_en_write(0);
    t = CONFIG_CLOCK_FREQUENCY / 1000; // 1000 kHz tick
    timer0_reload_write(t);
    timer0_load_write(t);
    timer0_en_write(1);
    timer0_ev_enable_write(1);
    timer0_ev_pending_write(1);
    irq_setmask(irq_getmask() | (1 << TIMER0_INTERRUPT));
}

safe_mode_t port_init(void) {
    irq_setmask(0);
    irq_setie(1);
    tick_init();
    board_init();
    return NO_SAFE_MODE;
}

extern uint32_t _ebss;
extern uint32_t _heap_start;
extern uint32_t _estack;

void reset_port(void) {
    // reset_all_pins();
    // i2c_reset();
    // spi_reset();
    // uart_reset();
    // pwmout_reset();
}

void reset_to_bootloader(void) {
    reboot_ctrl_write(0xac);
}

void reset_cpu(void) {
}

uint32_t *port_heap_get_bottom(void) {
    return port_stack_get_limit();
}

uint32_t *port_heap_get_top(void) {
    return port_stack_get_top();
}

uint32_t *port_stack_get_limit(void) {
    return &_ebss;
}

uint32_t *port_stack_get_top(void) {
    return &_estack;
}

// Place the word to save just after our BSS section that gets blanked.
void port_set_saved_word(uint32_t value) {
    _ebss = value;
}

uint32_t port_get_saved_word(void) {
    return _ebss;
}

uint64_t port_get_raw_ticks(uint8_t* subticks) {
    return raw_ticks;
}

// Enable 1/1024 second tick.
void port_enable_tick(void) {
}

// Disable 1/1024 second tick.
void port_disable_tick(void) {
}

void port_interrupt_after_ticks(uint32_t ticks) {
}

// TODO: Add sleep support if the SoC supports sleep.
void port_sleep_until_interrupt(void) {
}