/*
 * This file is part of the MicroPython project, http://micropython.org/
 *
 * The MIT License (MIT)
 *
 * Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

// Board setup

#define MICROPY_HW_BOARD_NAME       "Wemos Lolin C3 Mini" // from Wemos MP
#define MICROPY_HW_MCU_NAME         "ESP32-C3FH4" // from Wemos MP

// From Wemos C3 Mini Schematic
// https://www.wemos.cc/en/latest/_static/files/sch_c3_mini_v1.0.0.pdf
// And MP Config
// https://github.com/micropython/micropython/blob/master/ports/esp32/boards/LOLIN_C3_MINI
// Status LED
#define MICROPY_HW_NEOPIXEL         (&pin_GPIO7)

#define CIRCUITPY_BOARD_I2C         (1)
#define CIRCUITPY_BOARD_I2C_PIN     {{.scl = &pin_GPIO6, .sda = &pin_GPIO5}}

#define CIRCUITPY_BOARD_SPI         (1)
#define CIRCUITPY_BOARD_SPI_PIN     {{.clock = &pin_GPIO10, .mosi = &pin_GPIO7, .miso = &pin_GPIO8}}

#define CIRCUITPY_BOARD_UART        (1)
#define CIRCUITPY_BOARD_UART_PIN    {{.tx = &pin_GPIO21, .rx = &pin_GPIO20}}

// Explanation of how a user got into safe mode
#define BOARD_USER_SAFE_MODE_ACTION translate("pressing boot button at start up.\n")

#define CIRCUITPY_ESP_USB_SERIAL_JTAG (1)