The automatic code size build and GitHub comment is a really useful
feature. This commit adds a few more builds to it (mimxrt and samd).
Signed-off-by: Damien George <damien@micropython.org>
This is a MicroPython-specific module that existed to support the old
version of uasyncio. It's undocumented and not enabled on all ports and
takes up code size unnecessarily.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
- Update guide for extending built-in modules.
- Remove any last trace of umodule in other docs.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Applies to drivers/examples/extmod/port-modules/tools.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Make tests run in an isolated environment (i.e. `import io` would
otherwise get the `tests/io` directory).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Make tests run in an isolated environment (i.e. `import io` would
otherwise get the `tests/io` directory).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Make tests run in an isolated environment (i.e. `import io` would
otherwise get the `tests/io` directory).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Previously sys.path could be modified by append/pop or slice assignment.
This allows `sys.path = [...]`, which can be simpler in many cases, but
also improves CPython compatibility.
It also allows sys.path to be set to a tuple which means that you can
clear sys.path (e.g. temporarily) with no allocations.
This also makes sys.path (and sys.argv for consistency) able to be disabled
via mpconfig. The unix port (and upytesthelper) require them, so they
explicitly verify that they're enabled.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Otherwise you can get into the confusing state where e.g. sys.ps1 is
enabled in config (via `MICROPY_PY_SYS_PS1_PS2`) but still doesn't actually
get enabled.
Also verify that the required delegation options are enabled in modsys.c.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
When compiling mpy-cross, there is no `sys` module, and so there will
be no entries in the `mp_builtin_module_delegation_table`.
MSVC doesn't like this, so instead pretend as if the feature isn't
enabled at all.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This replaces the previous QSTR_null entry in the globals dict which could
leak out to Python (e.g. via iteration of mod.__dict__) and could lead to
crashes.
It results in smaller code size at the expense of turning a lookup into a
loop, but the list it is looping over likely only contains one or two
elements.
To allow a module to register its custom attr function it can use the new
`MP_REGISTER_MODULE_DELEGATION` macro.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Updates any includes, and references from Makefiles/CMake.
This essentially reverts what was done long ago in commit
136b5cbd76
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
In order to keep "import umodule" working, the existing mechanism is
replaced with a simple fallback to drop the "u".
This makes importing of built-ins no longer touch the filesystem, which
makes a typical built-in import take ~0.15ms rather than 3-5ms.
(Weak links were added in c14a81662c)
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This renames the builtin-modules, such that help('modules') and printing
the module object will show "module" rather than "umodule".
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
The QSPI driver provides the interface for using an on-board QSPI flash for
the filesystem. It provides the same methods as the driver for the
internal flash and uses the same name. Therefore, only one of the drivers
for internal flash, SPI flash and QSPI flash must be enabled at a time.
Signed-off-by: robert-hh <robert@hammelrath.com>
The SPI flash driver includes the block device for being used as a
filesystem. It provides the same methods as the driver for the internal
flash.
Signed-off-by: robert-hh <robert@hammelrath.com>
For SAMD21 devices, the board flash signals must be named in pins.csv as
FLASH_MOSI, FLASH_MISO, FLASH_SCK, FLASH_CS for creating the SPI object.
And rename the QSPI pins to QSPI_xxxx instead of FLASH_xxx.
Signed-off-by: robert-hh <robert@hammelrath.com>
Prior to this commit, importing a module that exists but has a syntax error
or some other problem that happens at import time would result in a
potentially-incomplete module object getting added to sys.modules.
Subsequent imports would use that object, resulting in confusing error
messages that hide the root cause of the problem.
This commit fixes that issue by removing the failed module from sys.modules
using the new NLR callback mechanism.
Note that it is still important to add the module to sys.modules while the
import is happening so that we can support circular imports just like
CPython does.
Fixes issue #967.
Signed-off-by: David Grayson <davidegrayson@gmail.com>
The changed functions now use less stack, and don't have any issues with
local variables needing to be declared volatile.
Testing on a PYBv1.0, imports (of .py, .mpy and frozen code) now use 64
less bytes of C stack per import depth.
Signed-off-by: Damien George <damien@micropython.org>
NLR buffers are usually quite large (use lots of C stack) and expensive to
push and pop. Some of the time they are only needed to perform clean up if
an exception happens, and then they re-raise the exception.
This commit allows optimizing that scenario by introducing a linked-list of
NLR callbacks that are called automatically when an exception is raised.
They are essentially a light-weight NLR handler that can implement a
"finally" block, i.e. clean-up when an exception is raised, or (by passing
`true` to nlr_pop_jump_callback) when execution leaves the scope.
Signed-off-by: Damien George <damien@micropython.org>
This commit just takes the necessary parts of pyboard.py and merges them
with pyboardextended.py to make a new transport_serial.py, and updates the
rest of mpremote to use this instead.
It is difficult to continue to add features to mpremote (which usually
requires modification to pyboard.py) while also maintaining backwards
compatibility for pyboard.py.
The idea is that this provides a starting point for further refactoring of
mpremote to allow different transports (webrepl, BLE, etc).
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Changes in this commit:
- Add a extra detail to each of the commands.
- Add more about handling options and arguments.
- Include shortcut commands that behave like real commands to the command
list (e.g. bootloader, rtc).
- Add extra information and reword to address common misconceptions, in
particular how commands chain together.
- Add additional examples showing some more interesting combinations.
- Add descriptions to each of the examples.
- Add pipx installation instructions.
- Describe how user-configuration works.
This work was sponsored by Google Season of Docs.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Replaces the existing functionality provided by the `setrtc` alias to use
the current time, rather than a hard-coded date/time.
Use `rtc` to query the current time. Use `rtc --set` to set it.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
For example, the `reset` shortcut previously allowed an optional delay, but
the argument handling cannot handle `reset next-command` as `next-command`
will be interpreted as the delay argument. The fix in this commit allows
`reset + next-command`.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
This allows the sequence to be paused (e.g. wait for device, etc).
Also removes the t_ms arg in reset/bootloader, because these arguments
don't really need to be changed, and keeping them would mean inconsistent
units used for time delays.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Updates all `help()` output to use the phrase:
`For online docs please visit http://docs.micropython.org/`
Some ports previously used different wording, some pointed to the wrong
link. Also make all ports use `help.c` for consistency.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
- Make the docs match the new behavior which only allows certain modules
to be extended.
- List the modules that currently have the u-prefix.
- Add a note about the sys.path method for forcing a built-in import.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
When foo.bar is imported, bar is added as an attribute to foo. Previously
this happened on every import, but should only happen on first import.
This verifies the behavior for relative imports and overriding.
This work was funded through GitHub Sponsors.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
