root
367a1d53c0
Fixes for pulsein on ESP32S3
2022-01-23 13:14:34 -06:00
Michael Himing
4d78e3401c
Fix esp32s3 devkitc uart naming and add board.UART
2022-01-22 15:25:33 +11:00
microDev
3970aa5a5e
fix build failure on two boards
2022-01-21 10:11:33 +05:30
MicroDev
dab35f7c72
Merge pull request #5880 from jepler/espressif-serial-trick-uf2
...
Request ROM bootloader when resetting using the 'serial trick'
2022-01-21 09:56:12 +05:30
Jeff Epler
ea30a8ac04
Reboot into the ROM bootloader from 1200 baud
...
Per Scott, the purpose of this trick is to make the board programmable from Arduino even when CP is installed, so my convenience of escaping into UF2 is not going to work out.
2022-01-20 18:50:50 -06:00
Scott Shawcroft
35175715f9
Check target defined
2022-01-20 14:11:33 -08:00
Scott Shawcroft
d99847b410
Refactor pin reset on ESP
...
This makes it easier to blanket never reset flash and USB pins. It
also allows us to set a custom state after reset. The first case
is for the double tap reset that needs to be pulled low.
Fixes #5893
2022-01-20 12:40:41 -08:00
Scott Shawcroft
13db65566d
ESP NeoPixel fixes
...
This tweaks the RMT timing to better match the 1/3 and 2/3 of 800khz
guideline for timing. It also ensures a delay of 300 microseconds
with the line low before reset.
Pin reset is now changed to the IDF default which pulls the pin up
rather than CircuitPython's old behavior of floating the pin.
Fixes #5679
2022-01-19 16:29:07 -08:00
Dan Halbert
8bae6af12a
Merge pull request #5888 from tannewt/esp_tick_core
...
Ensure supervisor_tick is run on the same core as CP
2022-01-19 19:26:50 -05:00
Kattni Rembor
880d43a4f7
Fix pin typo.
2022-01-19 17:04:30 -05:00
Scott Shawcroft
42fbebe62a
Merge pull request #5832 from ladyada/main
...
ESP32S2 camera board draft
2022-01-19 12:04:13 -08:00
Scott Shawcroft
78942112c7
Ensure supervisor_tick is run on the same core as CP
2022-01-19 11:36:40 -08:00
lady ada
f13ea93fe6
fix A5 pin name
2022-01-19 14:22:01 -05:00
lady ada
6d7472357d
newline
2022-01-18 20:46:09 -05:00
Scott Shawcroft
7ee5c01cf8
Add Espressif C3 dev board
2022-01-18 17:39:52 -08:00
lady ada
09cf95a51c
no psram :(
2022-01-18 20:14:17 -05:00
lady ada
de45a20b08
EOF
2022-01-18 20:14:17 -05:00
lady ada
71c792d608
try initial esp32s3 qtpy def
2022-01-18 20:14:17 -05:00
lady ada
d4dab79234
add buttonpin
2022-01-18 20:14:17 -05:00
lady ada
c1cee63c5a
fix tuplecompile
2022-01-18 20:14:17 -05:00
lady ada
1d44bf1c0c
add camera data port
2022-01-18 20:14:17 -05:00
lady ada
3381ac149e
fix camera display io to use default spi bus
2022-01-18 20:14:16 -05:00
lady ada
13b319c430
try rotation 0
2022-01-18 20:14:16 -05:00
lady ada
e9f0c1796e
oof fix i2c lines!
2022-01-18 20:14:16 -05:00
lady ada
4400124efe
snappysnap
2022-01-18 20:14:16 -05:00
lady ada
8b26f594c9
try not resetting i2c power
2022-01-18 20:14:16 -05:00
lady ada
647b894e7b
?? some include needed
2022-01-18 20:14:16 -05:00
lady ada
9c933558b5
enable I2C by default
2022-01-18 20:14:15 -05:00
Jeff Epler
872beeccfe
Merge remote-tracking branch 'origin/main' into espressif-serial-trick-uf2
2022-01-18 19:07:05 -06:00
Scott Shawcroft
c839d9b3cc
Fix S2 builds by not turning on USB with wifi
2022-01-18 15:50:32 -08:00
Scott Shawcroft
679f4b30ba
Tweak heap sizes for different targets
2022-01-18 15:23:19 -08:00
Jeff Epler
49b8579bcd
Request UF2 bootloader when resetting using the 'serial trick'
2022-01-17 17:14:31 -06:00
Dan Halbert
3453ced296
Merge pull request #5860 from tannewt/s3_core_1
...
Switch CP to core 1 on S3
2022-01-17 16:10:05 -05:00
Jeff Epler
895a8a9e72
Merge pull request #5866 from dhalbert/espressif-open-drain
...
fix espressif DigitalInOut open-drain
2022-01-17 12:51:31 -06:00
Dan Halbert
11848b1826
use GPIO_MODE_ instead of GPIO_MODE_DEF
2022-01-15 23:05:33 -05:00
Dan Halbert
c70c8a9390
fix espressif open-drain
2022-01-15 19:54:31 -05:00
Scott Shawcroft
f6cf15de43
Switch CP to core 1 on S3
2022-01-14 12:22:38 -08:00
Scott Shawcroft
993e51e5cc
Fix USB when enabling wifi
2022-01-14 11:52:14 -08:00
Scott Shawcroft
7af7cd418c
Merge pull request #5853 from tannewt/s3_config_rework
...
Split out target specific configs.
2022-01-14 10:25:50 -08:00
Scott Shawcroft
86e7247d11
Merge pull request #5854 from jepler/issue-5680
...
patch esp-idf for i2c crash
2022-01-14 09:37:23 -08:00
Jeff Epler
c87d9c947b
patch esp-idf for i2c crash
...
In theory, this Closes : #5680 -- I didn't test it on HW yet.
2022-01-14 08:53:24 -06:00
Scott Shawcroft
869cf5eba5
Run USB on the same core as CP
2022-01-13 15:55:37 -08:00
Scott Shawcroft
39639ecd17
Rework configs to take target into account
...
New script will filter settings to different tiers.
2022-01-13 15:55:37 -08:00
Scott Shawcroft
2233026556
Merge pull request #5848 from prplz/esp32s3-devkits
...
Esp32s3 devkits
2022-01-13 14:02:44 -08:00
Dan Halbert
59275c7225
Merge pull request #5846 from jepler/feather-esp32s2-tft-spi
...
feather esp32s2 tft: fix sharing of main display bus
2022-01-12 23:05:42 -05:00
Michael Himing
a878e3377c
Rename espressif_esp32s3_devkitc_1 to devkitc_1_n8r2
2022-01-13 13:24:06 +11:00
Michael Himing
212eedc42f
Rename espressif_esp32s3_devkitc_1_nopsram to devkitc_1_n8
2022-01-13 13:24:06 +11:00
Michael Himing
7575cacdc5
Add espressif_esp32s3_devkitc_1_n8r8
2022-01-13 13:24:06 +11:00
Jeff Epler
10c3836bc0
feather esp32s2 tft: fix sharing of main display bus
2022-01-12 14:35:00 -06:00
Kattni Rembor
fb96c09118
Add button pin to Feathers, fix pin order on QT Py.
2022-01-12 13:54:56 -05:00
Kattni Rembor
4efbfca2b0
Fix typo, pin order.
2022-01-10 14:45:54 -05:00
Dan Halbert
d166834e09
Merge pull request #5803 from dhalbert/countio-enhancements
...
countio: add selectable rise and fall detection, pulls
2021-12-31 23:45:59 -05:00
Dan Halbert
9d2a32d07e
countio: add selectable rise and fall detection, pulls
2021-12-31 16:34:58 -05:00
microDev
4daa7b5180
update espressif port
...
- enable rgbmatrix for all esp soc
- bump idf to latest commit on v4.4 branch
2021-12-30 19:23:41 +05:30
Dan Halbert
8aafc734a4
Merge pull request #5789 from adafruit/7.1.x
...
Merge latest changes from 7.1.x
2021-12-28 18:12:29 -05:00
Jeff Epler
1d13c4ccd1
Centralize LONGINT_IMPL handling
...
This closes #5782
2021-12-27 10:21:47 -06:00
Dan Halbert
cf70a9ca61
Turn on I2C power for each VM, instead of just after hard reset
2021-12-24 16:27:17 -05:00
Dan Halbert
889b25d792
put I2C_POWER_INVERTED alias before D7, for prettypins
2021-12-24 11:49:58 -05:00
Dan Halbert
cf349af35e
turn on I2C power after reset
2021-12-24 11:45:07 -05:00
Scott Shawcroft
605753cd7d
Merge pull request #5771 from hathach/s3-familyid
...
use family id for s2 and s3 depending on IDF_TARGET
2021-12-23 11:08:41 -08:00
Jeff Epler
900ec91fa6
Merge pull request #5761 from adafruit/7.1.x
...
Bring 7.1.x changes into main - cascadetoml undo + alarm fixes
2021-12-23 06:30:05 -07:00
hathach
53869d71fd
use family id for s2 and s3 depending on IDF_TARGET
2021-12-23 14:53:00 +07:00
Dan Halbert
3bb9a4439d
Fix recording of wake_alarm
2021-12-21 21:48:36 -05:00
Scott Shawcroft
1ec3e023d7
Merge pull request #5744 from jepler/update-protomatter
...
Update protomatter & re-enable rgbmatrix on esp32s2
2021-12-20 12:34:02 -08:00
Jeff Epler
60c2018262
Update protomatter & re-enable rgbmatrix on esp32s2
...
.. not enabled on s3 & c3 as I did not test there.
2021-12-17 12:04:39 -06:00
lady ada
654414e57e
fix colororder
2021-12-17 10:41:06 -05:00
lady ada
26c2acae12
nuudge
2021-12-17 09:47:44 -05:00
lady ada
8e540a1738
fix final qtpys2 and s2tft feather pinouts
2021-12-17 09:47:44 -05:00
lady ada
1c1559f5af
fix colororder
2021-12-17 09:41:44 -05:00
lady ada
c088090319
nuudge
2021-12-17 01:17:35 -05:00
lady ada
12e72ef406
fix final qtpys2 and s2tft feather pinouts
2021-12-17 00:24:19 -05:00
Tim Hawes
54e87d3660
Apply suggestions from code review
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-12-14 20:03:44 +00:00
Tim Hawes
c325633f8e
Add methods to ssl.SSLContext for handling self-signed certs
2021-12-14 01:00:50 +00:00
Tim Hawes
ef414bf1bd
Handle server_hostname argument in espressif SSLContext.wrap_socket
2021-12-14 01:00:50 +00:00
Tim Hawes
a3c8760d41
Fix to error checking in espressif SSLSocket
2021-12-13 17:55:43 +00:00
Dan Halbert
3bdf2a5cde
Merge pull request #5691 from jepler/esp32s3-pids
...
Fix PIDs to match official espressif list
2021-12-09 09:08:35 -05:00
Jeff Epler
937e0740f4
Fix PIDs to match official espressif list
...
See the slightly deceptively titled
* https://github.com/espressif/usb-pids/pull/29
2021-12-08 20:27:34 -06:00
Scott Shawcroft
b12d2063d0
Merge remote-tracking branch 'adafruit/7.1.x' into merge_7.1
2021-12-08 10:50:22 -08:00
Scott Shawcroft
e8e5ea7c2f
Merge pull request #5674 from jepler/esp32s3-box-display
...
esp32s3-box: enable display
2021-12-06 14:06:02 -08:00
Jeff Epler
40d947cee3
Merge pull request #5655 from jepler/esp32s3-devkitc
...
Espressif: Add Esp32s3 devkitc board definitions
2021-12-06 12:47:04 -06:00
Jeff Epler
1b5e98e2fa
esp32s3 box: add display
2021-12-06 10:08:44 -06:00
Jeff Epler
b722a2bca1
espressif: pwmout: get rid of not_first_reset special case
2021-12-06 10:08:44 -06:00
Jeff Epler
fae6d47a45
espressif: keep never_reset_pins marked as in use
2021-12-06 10:08:44 -06:00
Dan Halbert
c43e0bd2db
uncrustify fixes
2021-12-06 09:54:15 -05:00
MicroDev
7df172ba19
Merge pull request #5660 from jepler/esp32s3-spi
...
espressif: busio.SPI: Use SPI_DMA_CH_AUTO
2021-12-06 10:24:51 +05:30
Jeff Epler
2ad877a907
Fix VID/PID of esp32-box
2021-12-04 14:58:48 -06:00
Jeff Epler
e2abb0e059
devkitc: update vid/pid in anticipation of allocation from espressif
2021-12-04 10:19:19 -06:00
Jeff Epler
bc7f024545
espressif: Add esp32s3_box
...
This module has 16MB flash, 8MB PSRAM, as well as a display & speakers.
2021-12-04 09:14:57 -06:00
Jeff Epler
1207bfced9
espressif: Use detected size of spiram
2021-12-04 09:14:22 -06:00
Jeff Epler
1a99ce5eb3
espressif: busio.SPI: Use SPI_DMA_CH_AUTO
...
All 3 micros we care about (S2, S3, C3) state in the documentation
that DMA channel can be specified as SPI_DMA_CH_AUTO.
Specifying a specific DMA channel explicitly doesn't _ever_ work on
ESP32-S3, so no SPI bus could be used.
Testing performed: On the ESP32-S3-DevKitC, used neopixel_spi to
turn the onboard neopixel red, green, and blue
2021-12-04 09:12:38 -06:00
Jeff Epler
23e0a25aa2
add nopsram version of the devkit C
2021-12-03 15:20:11 -06:00
Jeff Epler
659babc620
Add the esp32s3 devkitc (psram variant)
2021-12-03 15:09:59 -06:00
Dan Halbert
f594ab2e67
Merge pull request #5615 from microDev1/espressif
...
Update espressif port
2021-12-03 14:55:05 -05:00
microDev
9e286432d2
add esp32s3 documentation in readme
2021-12-03 21:20:55 +05:30
Dan Halbert
57c33059f3
board_deinit() everywhere
2021-11-30 11:00:10 -05:00
Kattni Rembor
c13f1d19f5
Update pins to silk pin first.
2021-11-29 17:56:03 -05:00
lady ada
83de740d1f
kan prezz
2021-11-26 15:13:58 -05:00
lady ada
c56e33e6c2
woops fix SPI for rev A (will change in rev B to be correct)
2021-11-26 15:06:09 -05:00
lady ada
3c007ba094
re-add psram!
2021-11-26 13:50:12 -05:00
microDev
dddc282e34
update default sdkconfig and correct bootloader offset
2021-11-26 22:44:22 +05:30
