Changes in this commit:
- Fix USB CDC RX handling to not block when unprocessed. The fix follows
5873390226.
- Fix dupterm rx.
- Remove some obsolete lines.
This commit changes the method of waiting for SPI being not busy. Instead
of the FIFO size, the TransferBusyFlag is probed.
Also, raise an error if the transfer failed.
Changes in this commit:
- Start the RTC Timer at system boot. Otherwise time.time() will advance
only if an RTC() object was created.
- Set the time to a more recent date than Jan 1, 1970, if not set. That is
2013/10/14, 19:53:11, MicroPython's first commit.
- Compensate an underflow in in timeutils_seconds_since_2000(), called by
time.time(), if the time is set to a pre-2000 date.
This is enabled at MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES, which is the
default for stm32. Not setting the value in mpconfigboard.h allows boards
to optionally configure it.
Signed-off-by: Damien George <damien@micropython.org>
Prior to this commit, the USB CDC OUT endpoint got NACK'd if a character
was received but not consumed by the application, e.g. via
sys.stdin.read(). This meant that USB CDC was blocked and no additional
characters could be sent from the host. In particular a ctrl-C could not
interrupt the application if another character was pending.
To fix the issue, the approach in this commit uses a callback tud_cdc_rx_cb
which is called by the TinyUSB stack on reception of new CDC data. By
consuming the data immediately, the endpoint does not stall anymore. The
previous handler tud_cdc_rx_wanted_cb was made obsolete and removed.
In addition some cleanup was done along the way: by adding interrupt_char.c
and removing the existing code mp_hal_set_interrupt_char(). Also, there is
now only one (stdin) ringbuffer.
Fixes issue #7996.
With the existing code problems can occur with remounting, the "if t -
t_last_activity > QUIET_TIMEOUT:" check can be triggered early before the
REPL string comes through, meaning that the remount doesn't happen.
On certain boards the "MPY: soft reboot" line comes through immediately
(getting the routine past initial timeout) but then there's a slightly
longer delay while the board restarts before it prints out the startup
header and the REPL prompt.
This commit adds some extra pattern monitoring during the timeout loop to
track the state if a soft restart is actually started.
This codec is assembled for the MIMXRT1xxx_DEV boards and available for
WM8960 breakout boards as well.
The driver itself has been tested as working with the MIMXRT boards and a
Sparkfun WM6890 breakout board. It implements the initialization, basic
methods and some enhanced methods like 3D, ALC, soft-mute and deemphasis.
The CAN.initfilterbanks() class method is removed, and its functionality is
replaced with the "num_filter_banks" keyword argument to the CAN
constructor and CAN.init(). This configures the filter bank split.
This new approach provides more flexibility configuring the resources used
by a given CAN instance, allowing other MCUs like H7 to fit the API. It
also brings CAN closer to how other machine peripherals are configured,
where everything is done in the constructor/init method.
This is a breaking change to the CAN API.
CAN.recv() now returns a 5-tuple, with the new element in the second
position being a boolean, True if the ID is extended.
This is a breaking change of the API for CAN.recv().
A CAN bus can have mixed classic/FD nodes. Prior to this patch the CAN API
could be configured for either standard or extended ID, but not both/mixed
operation.
This patch allows extended IDs to be filtered and enabled on a per-message
basis, in send(), setfilter() and clearfilter().
This is a breaking change to the API: init() no longer accepts the extframe
keyword argument.
- Enable CAN FD frame support and BRS.
- Optimize the message RAM usage per FDCAN instance.
- Document the usage and different sections of the Message RAM.
- The classification of source files in makeqstrdefs.py has been moved into
functions to consolidate the logic for that classification into a single
place.
- Classification of source files (into C or C++ or "other" files) is based
on the filename extension.
- For C++ there are many more common filename extensions than just ".cpp";
see "Options Controlling the Kind of Output" in man gcc for example. All
common extensions for C++ source files which need preprocessing have been
added.
The values are always real objects, only the key can be MP_OBJ_NULL to
indicate a **kwargs entry.
Signed-off-by: Damien George <damien@micropython.org>
There were two issues with the existing code:
1. "1 << i" is computed as a 32-bit number so would overflow when
executed on 64-bit machines (when mp_uint_t is 64-bit). This meant that
*args beyond 32 positions would not be handled correctly.
2. star_args must fit as a positive small int so that it is encoded
correctly in the emitted code. MP_SMALL_INT_BITS is too big because it
overflows a small int by 1 bit. MP_SMALL_INT_BITS - 1 does not work
because it produces a signed small int which is then sign extended when
extracted (even by mp_obj_get_int_truncated), and this sign extension
means that any position arg after *args is also treated as a star-arg.
So the maximum bit position is MP_SMALL_INT_BITS - 2. This means that
MP_OBJ_SMALL_INT_VALUE() can be used instead of
mp_obj_get_int_truncated() to get the value of star_args.
These issues are fixed by this commit, and a test added.
Signed-off-by: Damien George <damien@micropython.org>
This replaces instances of uint with size_t and int with ssize_t in
the mp_call_prepare_args_n_kw_var() function since all of the variables
are used as array offsets.
Also sort headers while we are touching this.
Signed-off-by: David Lechner <david@pybricks.com>
This fixes code coverage for the case where a *arg without __len__ is
unpacked and uses exactly the amount of memory that was allocated for
kw args. This triggers the code branch where the memory for the kw args
gets reallocated since it was used already by the *arg unpacking.
Signed-off-by: David Lechner <david@pybricks.com>
To reach this check, n_kw has to be >= 1 and therefore args2_alloc has
to be >= 2. Therefore new_alloc will always be >= 4. So this check will
never be true and can be removed.
Signed-off-by: David Lechner <david@pybricks.com>
This fixes overallocating an extra mp_obj_t when the length of *args and
**args is known. Previously we were allocating 1 mp_obj_t for each
n_args and n_kw plus the length of each *arg and **arg (if they are
known). Since n_args includes *args and n_kw includes **args, this was
allocating an extra mp_obj_t in addition to the length of these args
when unpacked.
To fix this, we just subtract 1 from the length to account for the 1
already implicitly allocated by n_args and n_kw.
Signed-off-by: David Lechner <david@pybricks.com>
This is a partial implementation of PEP 448 to allow unpacking multiple
star args in a function or method call.
This is implemented by changing the emitted bytecodes so that both
positional args and star args are stored as positional args. A bitmap is
added to indicate if an argument at a given position is a positional
argument or a star arg.
In the generated code, this new bitmap takes the place of the old star arg.
It is stored as a small int, so this means only the first N arguments can
be star args where N is the number of bits in a small int.
The runtime is modified to interpret this new bytecode format while still
trying to perform as few memory reallocations as possible.
Signed-off-by: David Lechner <david@pybricks.com>
This is a partial implementation of PEP 448 to allow multiple ** unpackings
when calling a function or method.
The compiler is modified to encode the argument as a None: obj key-value
pair (similar to how regular keyword arguments are encoded as str: obj
pairs). The extra object that was pushed on the stack to hold a single **
unpacking object is no longer used and is removed.
The runtime is modified to decode this new format.
Signed-off-by: David Lechner <david@pybricks.com>
This warning can happen on clang 13.0.1 building mpy-cross:
../py/vm.c:748:25: error: array index -3 refers past the last possible
element for an array in 64-bit address space containing 64-bit (8-byte)
elements (max possible 2305843009213693952 elements)
[-Werror,-Warray-bounds]
sp[-MP_OBJ_ITER_BUF_NSLOTS + 1] = MP_OBJ_NULL;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
Using pointer access instead of array access works around this warning.
Fixes issue #8467.
Signed-off-by: Damien George <damien@micropython.org>
This commit adds optimised l32i/s32i functions that select the best load/
store encoding based on the size of the offset, and uses the function when
necessary in code generation.
Without this, ASM_LOAD_REG_REG_OFFSET() could overflow the word offset
(using a narrow encoding), for example when loading the prelude from the
constant table when there are many (>16) constants.
Fixes issue #8458.
Signed-off-by: Damien George <damien@micropython.org>
The following fixes are made:
- cancelling a gather now cancels all sub-tasks of the gather (previously
it would only cancel the first)
- if any sub-task of a gather raises an exception then the gather finishes
(previously it would only finish if the first sub-task raised)
Fixes issues #5798, #7807, #7901.
Signed-off-by: Damien George <damien@micropython.org>
This implements a form of CPython's "add_done_callback()", but at this
stage it is a hidden feature and only intended to be used internally.
Signed-off-by: Damien George <damien@micropython.org>
