Commit Graph

13750 Commits

Author SHA1 Message Date
Andrew Leech
7d9cc69645 rp2/Makefile: Use cmake for "make submodules" task when needed.
Because the submodule list can be updated by cmake files.

Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:29:11 +10:00
Andrew Leech
21b3a396de extmod/network_wiznet5k: Add Wiznet Ethernet network interface.
Originally based on both stm32/network_wiznet5k and stm32/modnwwiznet5k.

If MICROPY_PY_LWIP is enabled it uses the lwIP TCP stack in MicroPython,
communicating with the Wiznet controller in MACRAW mode.  In this mode it
supports using the INTN pin from Wiznet controller to receive data from an
interrupt trigger.

If lwIP is not enabled, it runs in modnetwork/socket mode providing an
interface to the TCP stack running on the Wiznet controller chip.  In this
mode it includes some updates by @irinakim12 from #8021, most notably
bringing in DHCP support.

Supports defining hardware pins in board config or dynamically set at
runtime.  Sets a default MAC address in the random namespace from board
unique-id.

Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:29:11 +10:00
Andrew Leech
cb436e357f lib/wiznet5k: Add submodule for Wiznet Ethernet drivers.
Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:29:11 +10:00
Andrew Leech
05f927b624 rp2/machine_pin: Add mp_hal_pin_interrupt C interface.
So C can can easily configure a pin interrupt and callback.

Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:29:11 +10:00
Andrew Leech
9bd6169b72 rp2/mbedtls: Add support for ssl module with MICROPY_SSL_MBEDTLS.
Signed-off-by: Andrew Leech <andrew@alelec.net>
2022-06-03 14:29:06 +10:00
Andrew Leech
494e8ba722 nrf/mpconfigport: Fix MICROPY_VFS IO build support. 2022-06-03 12:39:43 +10:00
Andrew Leech
c5878dd1f9 nrf/mpconfigport: Enable extra features as defined by ROM levels.
This commit enables extra features from the ROM levels and further
simplifies mpconfigport.h.  The changes are:

- NRF51822 & BLUETOOTH_SD -> MICROPY_CONFIG_ROM_LEVEL_MINIMUM
    - no changes

- NRF51822 -> MICROPY_CONFIG_ROM_LEVEL_CORE_FEATURES
    - MICROPY_PY_IO = 1

- NRF52832 -> MICROPY_CONFIG_ROM_LEVEL_BASIC_FEATURES
    - MICROPY_PY_IO = 1

- NRF52840, NRF9160 -> MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES
    - MICROPY_COMP_MODULE_CONST = 1
    - MICROPY_COMP_TRIPLE_TUPLE_ASSIGN = 1
    - MICROPY_OPT_MPZ_BITWISE = 1
    - MICROPY_PY_ALL_SPECIAL_METHODS = 1
    - MICROPY_PY_BUILTINS_EXECFILE = 1
    - MICROPY_PY_BUILTINS_SLICE_ATTRS = 1
    - MICROPY_PY_BUILTINS_STR_CENTER = 1
    - MICROPY_PY_BUILTINS_STR_PARTITION = 1
    - MICROPY_PY_BUILTINS_STR_SPLITLINES = 1
    - MICROPY_PY_CMATH = 1
    - MICROPY_PY_COLLECTIONS_ORDEREDDICT = 1
    - MICROPY_PY_FRAMEBUF = 1
    - MICROPY_PY_IO = 1
    - MICROPY_PY_MATH_SPECIAL_FUNCTIONS = 1
    - MICROPY_PY_SYS_STDIO_BUFFER = 1
    - MICROPY_PY_UCTYPES = 1
    - MICROPY_PY_UHEAPQ = 1
    - MICROPY_PY_UJSON = 1
    - MICROPY_PY_URE = 1
    - MICROPY_PY_UZLIB = 1
    - MICROPY_REPL_EMACS_KEYS = 1
2022-06-03 12:37:12 +10:00
Andrew Leech
13f5d38f2e nrf/mpconfigport: Set MICROPY_CONFIG_ROM_LEVEL defines for each MCU.
This commit is a no-op change to simplify existing config.
2022-06-03 12:36:40 +10:00
Andrew Leech
8fb01be6cf stm32/rfcore: Remove extra layer of buffering on BLE IPCC.
Whole packets are now pushed up to the higher layer of the BLE stack,
instead of buffering the packets so individual bytes can be requested.
2022-06-03 11:58:43 +10:00
Andrew Leech
91fb9e7888 extmod/nimble: Add support for reading whole HCI UART packets.
This can improve efficiency for Bluetooth systems that already process
whole packets at the lower layers.
2022-06-03 11:53:28 +10:00
Takeo Takahashi
19c680ff57 test/renesas-ra: Remove unsupported feature test of Pin.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
2022-06-03 10:58:16 +10:00
Takeo Takahashi
dd83f48fb2 renesas-ra/machine_pin: Remove code for unsupported Pin features.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
2022-06-03 10:57:48 +10:00
robert-hh
a0432ed9cb mimxrt: Update port to work with new nxp_driver v2.10.
The nxp_driver v2.10 allows for/requires some changes to the code:

- Remove some part of pwm_backlog.*, which is provided by the lib now.
- Change eth.c: the newer versions have additional parameters of the
  library versions.
- Change sdcard.c: use TransferBlocking instead of TransferNonblocking.
- Add some support for the MIMXRT1176 device.
- Set the clocks for UART, I2C, Timer.
- Integrate the I2S module and fix a rebase error.
- Use blocking transfer only for SPI.  It's faster and interferes less with
  other modules.
- Use the clock_config.c files of library v2.8.5.  The mimxrt files keeps
  the clock_config.c files from Verson 2.8.5.  With clock_config.c from
  v2.10, the boards do not work.  Refactoring of the clock set-up is on the
  to-do list.
- Enable expiry timers for UART, I2C and SPI, avoiding a stall in library
  code.
- The clock_config.* files are moved from the board-specific directories to
  the boards directory and given a MCU related name.
2022-06-03 10:48:49 +10:00
robert-hh
dbe8b0c0ca lib/nxp_driver: Update nxp_driver to v2.10. 2022-06-03 10:48:04 +10:00
iabdalkader
364569d25f drivers/lsm6dsox: Add support for SPI mode. 2022-06-03 01:24:51 +10:00
Damien George
a1afb337d2 extmod/uasyncio: Fix edge case for cancellation of wait_for.
This fixes the cases where the task being waited on finishes just before or
just after the wait_for itself is cancelled.

Fixes issue #8717.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 17:14:20 +10:00
Damien George
efe23aca71 all: Remove third argument to MP_REGISTER_MODULE.
It's no longer needed because this macro is now processed after
preprocessing the source code via cpp (in the qstr extraction stage), which
means unused MP_REGISTER_MODULE's are filtered out by the preprocessor.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 16:31:37 +10:00
Damien George
47f634300c py: Change makemoduledefs process so it uses output of qstr extraction.
This cleans up the parsing of MP_REGISTER_MODULE() and generation of
genhdr/moduledefs.h so that it uses the same process as compressed error
string messages, using the output of qstr extraction.

This makes sure all MP_REGISTER_MODULE()'s that are part of the build are
correctly picked up.  Previously the extraction would miss some (eg if you
had a mod.c file in the board directory for an stm32 board).

Build speed is more or less unchanged.

Thanks to @stinos for the ports/windows/msvc/genhdr.targets changes.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 16:29:53 +10:00
Damien George
340872cfdd stm32/boards/LEGO_HUB_NO6: Add helper scripts to update app firmware.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 15:22:16 +10:00
Damien George
87ca431f3f stm32/boards/LEGO_HUB_NO6: Implement robust filesystem-load updates.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George
d84ebc31f7 stm32/boards/LEGO_HUB_NO6: Use multi-colour LED for mboot status.
This gives more information to the user when doing updates from SPI flash.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George
fae9205594 stm32/boards/LEGO_HUB_NO6: Add support for mboot to access SPI flash.
The following changes are made:
- Use software SPI for external SPI flash access when building mboot.
- Enable the mboot filesystem-loading feature, with FAT FS support.
- Increase the frequency of the CPU when in mboot to 96MHz, to increase the
  speed of SPI flash accesses and programming.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George
36211baf0e stm32/boards/LEGO_HUB_NO6: Make all SPI flash transfers use 32-bit addr.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George
87fbceef26 stm32/mboot: Pass initial_r0 to early-init and get-reset-mode funcs.
This allows a board to modify initial_r0 if needed.

Also make default board behaviour functions always available, named as
mboot_get_reset_mode_default and mboot_state_change_default.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George
e64947dc90 stm32/mboot: Make 0x70ad0000 values named constants with macros.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George
9246099935 stm32/mboot: Add update_app_elements to return mboot fsload elements.
In case the elements should not be passed directly to machine.bootloader.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George
1296a01f4c stm32/mboot: Move remaining led_state_all call into mboot_state_change.
This was missed in b2deea6762

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George
54f1694ab6 drivers/bus: Rename MP_SPI_ADDR_IS_32B to MICROPY_HW_SPI_ADDR_IS_32BIT.
And allow it to be configured externally, if needed.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Jared Hancock
2f4aca0381 mimxrt/mphalport: Fix strict aliasing error with unique id. 2022-06-02 12:50:14 +10:00
Damien George
6bda80d811 esp32/machine_i2c: Implement write-then-read I2C transfers.
I2C transfers are much more efficient if they are combined, instead of
doing separate writes and reads.

Fixes issue #7134.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-01 13:20:30 +10:00
Damien George
4a1ae99ac3 extmod/machine_i2c: Add optional support for write-then-read transfers.
This option is useful for ports where it's more efficient to do a full I2C
transfer in one go.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-01 13:20:27 +10:00
Andrew Leech
ea9a904b72 docs/reference/manifest: Add link to details about opt-level for freeze. 2022-05-27 14:45:46 +10:00
robert-hh
1df7678674 mimxrt/boards: Extend the deploy_teensy.md instructions. 2022-05-27 13:23:46 +10:00
robert-hh
c7accf7666 mimxrt/boards/OLIMEX_RT1010: Document the initial deploy procedure.
The procedure given here will work whether or not the DevKit motherboard is
used and is equipped with the support MCU.  It is laborious but works.
2022-05-27 13:23:46 +10:00
robert-hh
f795d5bc38 docs/mimxrt: Move the pinout tables to a separate document.
This shortens the quickref.  Also change the note about the hardware SPI
frequeny limits.
2022-05-27 12:48:16 +10:00
robert-hh
eda52e4d73 docs/mimxrt: Add i.MX RT1015 to general.rst, and a few clarifications. 2022-05-27 12:47:54 +10:00
Damien George
065df5568c tests: Move native while test from pybnative to micropython.
And make it so this test can run on any target.

LED and time testing has been removed from this test, that can now be
tested using: ./run-tests.py --via-mpy --emit native.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-26 12:54:43 +10:00
Damien George
20d9f3409a tests/run-tests.py: Add rp2 test target.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-26 12:54:43 +10:00
Damien George
80a86c48e3 tests/micropython: Make import_mpy_native test run on all architectures.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-26 12:54:43 +10:00
Damien George
3180113aef tests/micropython: Make import_mpy_native_gc run on ARMv6-M and above.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-26 12:23:49 +10:00
Damien George
4290d51320 py/emitinlinethumb: Make float instruction use dynamically selectable.
This allows mpy-cross to dynamically select whether ARMv7-M float
instructions are supported in @micropython.asm_thumb functions.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-26 12:22:07 +10:00
Damien George
cca08922d9 py/emitinlinethumb: Make ARMv7-M instruction use dynamically selectable.
This follows on from a5324a1074 and allows
mpy-cross to dynamically select whether ARMv7-M instructions are supported
in @micropython.asm_thumb functions.

The config option MICROPY_EMIT_INLINE_THUMB_ARMV7M is no longer needed, it
is now controlled by MICROPY_EMIT_THUMB_ARMV7M.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-26 11:54:48 +10:00
Damien George
1d047617bb tools/mpy-tool.py: Remove obsolete unicode flag in .mpy header.
This was removed in c49d5207e9

Signed-off-by: Damien George <damien@micropython.org>
2022-05-26 11:43:46 +10:00
iabdalkader
4946dc5f8c teensy/mpconfigport.h: Remove obsolete macros. 2022-05-26 11:17:46 +10:00
iabdalkader
0bdfceacbe extmod/network_ninaw10: Add support for socket events callback. 2022-05-26 11:15:07 +10:00
iabdalkader
be83bdf9ec drivers/ninaw10: Update driver to support firmware 1.5.0.
* Firmware 1.5.0 introduces a new BSD-like sockets ABI,
which improves the integration with MicroPython.
2022-05-25 16:05:50 +02:00
iabdalkader
875caca504 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Enable webrepl. 2022-05-25 16:05:50 +02:00
iabdalkader
a22d0bda52 rp2/boards/ARDUINO_NANO_RP2040_CONNECT: Disable internal errno.
* Internal errno can't be used with Nina module due to an issue
with esp-idf config.
2022-05-25 16:05:50 +02:00
iabdalkader
4bcffbd1c6 rp2/mpconfigport.h: Allow boards to override internal errno config. 2022-05-25 16:05:50 +02:00
iabdalkader
d037e75991 rp2/mpconfigport.h: Enable static scheduler nodes. 2022-05-25 16:05:50 +02:00