RetiredWizard
fb4def2824
remove CIRCUITPY_RTC = 1 from mpconfigport.mk
...
Full build includes the RTC bits so don't need to enable it
in ports/broadcom/mpconfigport.mk
2023-01-23 14:52:20 -05:00
RetiredWizard
43b1d2618e
Remove erroneous left over comment
2023-01-23 14:19:27 -05:00
RetiredWizard
4f830f1bbb
Fix parameter name and remove unnecessary function
2023-01-21 22:57:52 -05:00
RetiredWizard
3361ec390d
Broadcom port: Add 'fake' RTC support
...
The Broadcom chips apparently don't have an RTC, so this PR uses the
timer to add dummy RTC responses and allow resonable results
from time.localtime() as well as setting the time and date while
the board is powered.
2023-01-21 22:19:10 -05:00
Scott Shawcroft
ad2d190507
Merge pull request #7247 from tannewt/picow_web_workflow
...
Enable* web workflow for Pico W
2022-11-28 14:19:42 -08:00
Scott Shawcroft
c3a96a63c0
Enable* web workflow for Pico W
...
* Except for circuitpython.local which depends on MDNS and will be
done in a follow up PR.
Progress on #7214
2022-11-21 16:24:05 -08:00
MicroDev
c3c1717813
refactor common port specific Makefile code
2022-11-18 23:00:28 +05:30
MicroDev
e2a3597263
add awesome new make error message
...
Copied from initial implementation on atmel-samd
Co-authored-by: Rose Hooper <rhooper@toybox.ca>
Co-authored-by: Jeff Epler <jepler@gmail.com>
2022-11-18 11:27:23 +05:30
Jeff Epler
907c5d387f
Tweak black_bindings
...
Originally, black_bindings found each contiguous "//|" block and sent
it to black independently. This was slower than it needed to be.
Instead, swap the comment prefix: when running black, take off
"//|" prefixes and put "##|" prefixes on all un-prefixed lines.
Then, after black is run, do the opposite operation
This more than doubles the overall speed of "pre-commit run --all",
from 3m20s to 55s CPU time on my local machine (32.5s to under 10s
"elapsed" time)
It also causes a small amount of churn in the bindings, because
black now sees enough context to know whether one 'def' follows another
or ends the 'def's in a 'class'. In the latter case, it adds an extra
newline, which becomes a "//|" line.
I'm less sure why a trailing comma was omitted before down in
rp2pio/StateMachine.c but let's roll with it.
2022-09-30 11:18:13 -05:00
Dan Halbert
db065a299f
Merge pull request #6933 from jepler/ 🥧 🐮
...
Implement a useful subset of `wifi` and `socketpool` modules on 🥧 🐮
2022-09-28 18:09:24 -04:00
Jeff Epler
346fff2e7c
cyw43 basic gpio support, hwaddr in boot_out
2022-09-28 10:06:33 -05:00
Jeff Epler
b2cc8d2aad
run black_bindings across all bindings
2022-09-27 15:21:42 -05:00
Dan Halbert
e25c195b78
fix broadcom UART ringbuf init
2022-09-25 09:12:23 -04:00
Dan Halbert
ea15a9118a
ringbuf cleanup
2022-09-21 10:03:05 -04:00
RetiredWizard
14b604f48c
Add LED pin definition to Zero 2W board
2022-09-10 23:18:25 -04:00
RetiredWizard
28756936d5
Add HW_LED_STATUS pin to Zero 2W board
2022-09-10 23:17:02 -04:00
RetiredWizard
38a0ca324e
Uses different pins for RX/TX
2022-09-10 21:48:10 -04:00
RetiredWizard
f4eb618598
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:42:41 -04:00
RetiredWizard
1bdf9fca40
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:40:31 -04:00
RetiredWizard
1d03d73c13
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:39:51 -04:00
RetiredWizard
29e0aba72f
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:39:03 -04:00
RetiredWizard
fb4062d23f
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:38:16 -04:00
RetiredWizard
72c479efe6
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:37:31 -04:00
RetiredWizard
a892af8d77
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:36:41 -04:00
RetiredWizard
7708f19ec8
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:36:01 -04:00
RetiredWizard
0913e3a148
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:34:45 -04:00
RetiredWizard
ecb74aa652
Remove CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:33:29 -04:00
Dan Halbert
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
Dan Halbert
84807cd6eb
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:13:19 -04:00
Neradoc
eabe8b971a
list extensions instead of macros names ("bin,uf2" not BIN_UF2)
...
the modules_support_matrix usees a dictionnary per board instead of a list
optionally include the frozen modules URLs in it
2022-07-26 18:15:59 +02:00
Neradoc
d021d9ae4a
Move build extensions to board directories
...
- define CIRCUITPY_BUILD_EXTENSIONS to predefined values
- set CIRCUITPY_BUILD_EXTENSIONS in port and board config
- reuse the support matrix "get_settings_from_makefile" to get it
- move the existing port and board specific values
- remove the C3 specific board values because it's not the default
- update build_release_files.py to use get_settings_from_makefile
2022-07-26 18:15:50 +02:00
Scott Shawcroft
ac460dd1e1
Merge branch 'main' into esp32
2022-07-13 15:30:53 -07:00
Jeff Epler
c4dfd8e30a
Fix default BOARD setting & messages
...
It's important that these lines NOT be indented with tabs, because
that provokes Make to say that commands appear before a target.
2022-07-07 17:17:15 -05:00
Dan Halbert
8bb369cac5
refactor debug UART to console UART; get working on ESP32
2022-06-30 23:16:46 -04:00
Scott Shawcroft
4d776339ad
Separate translate object control from LTO
2022-05-31 12:42:59 -07:00
Scott Shawcroft
9d10a3da66
Conditionalize LTO
2022-05-27 12:59:54 -07:00
Dan Halbert
a01dec1df9
message consolidation and more use of validators
2022-05-19 15:38:37 -04:00
Jeff Epler
78cf0a90af
Make MP_PROPERTY_GETTER / _GETSET fully declare the property
...
This will enable setting data attributes, namely, the section of the
symbol.
2022-05-03 08:48:53 -05:00
Jeff Epler
31da335cac
Introduce, use MP_PROPERTY_GETTER, _GETSET
...
Later, these can be changed in cunning ways to save flash storage.
2022-05-03 08:48:52 -05:00
Scott Shawcroft
83593a1558
Start of USB host API
...
This allows you to list and explore connected USB devices. It
only stubs out the methods to communicate to endpoints. That will
come in a follow up once TinyUSB has it. (It's in progress.)
Related to #5986
2022-03-07 18:07:25 -08:00
Scott Gauche
a8d8651873
Canonical C style for half_duplex = true/false
2022-02-08 23:13:22 -05:00
Scott Gauche
89ad767b8f
add half_duplex to spi constructs in other ports but raise not implemented errors
2022-02-08 22:25:23 -05:00
Dan Halbert
cc410ad6a3
common-hal I2C combined write_read
2022-01-31 22:03:30 -05:00
Scott Shawcroft
bec36f5c7f
Add Pi Zero and update PIDs
2022-01-07 11:47:31 -08:00
Scott Shawcroft
39a239113f
Enable neopixel for status
2022-01-07 11:23:50 -08:00
Scott Shawcroft
3238d8364d
Piunora + full build + high speed usb
2022-01-07 11:23:50 -08:00
Scott Shawcroft
5f32d1f34b
Piunora pinout
2022-01-07 11:23:49 -08:00
Dan Halbert
afd686986a
Merge pull request #5800 from tannewt/rpi_zero
...
Initial Pi Zero support
2022-01-07 09:05:30 -05:00
Scott Shawcroft
2a2f94df15
Update tinyusb for zero support
2022-01-06 08:52:33 -08:00
Scott Shawcroft
48d826b15d
Never reset SD card pins
2022-01-04 19:08:14 -08:00
