fae6d47a45
espressif: keep never_reset_pins marked as in use
2021-12-06 10:08:44 -06:00
7ee825370e
Use 4x space instead of tab.
2021-12-06 17:28:45 +08:00
bde65d0f28
Added Maker Nano RP2040
2021-12-06 17:26:00 +08:00
7df172ba19
Merge pull request #5660 from jepler/esp32s3-spi
...
espressif: busio.SPI: Use SPI_DMA_CH_AUTO
2021-12-06 10:24:51 +05:30
2ad877a907
Fix VID/PID of esp32-box
2021-12-04 14:58:48 -06:00
bc7f024545
espressif: Add esp32s3_box
...
This module has 16MB flash, 8MB PSRAM, as well as a display & speakers.
2021-12-04 09:14:57 -06:00
1207bfced9
espressif: Use detected size of spiram
2021-12-04 09:14:22 -06:00
1a99ce5eb3
espressif: busio.SPI: Use SPI_DMA_CH_AUTO
...
All 3 micros we care about (S2, S3, C3) state in the documentation
that DMA channel can be specified as SPI_DMA_CH_AUTO.
Specifying a specific DMA channel explicitly doesn't _ever_ work on
ESP32-S3, so no SPI bus could be used.
Testing performed: On the ESP32-S3-DevKitC, used neopixel_spi to
turn the onboard neopixel red, green, and blue
2021-12-04 09:12:38 -06:00
f594ab2e67
Merge pull request #5615 from microDev1/espressif
...
Update espressif port
2021-12-03 14:55:05 -05:00
3b6011d551
Update pin order to match silk.
2021-12-03 11:40:40 -05:00
9e286432d2
add esp32s3 documentation in readme
2021-12-03 21:20:55 +05:30
543e4d8c4d
Merge pull request #5648 from tannewt/rpi_pin_mux
...
Add full pin mux info and use it for I2C
2021-12-02 10:46:46 -08:00
8adb0ecd33
Fix loop bounds
2021-12-02 10:28:26 -08:00
69faaa52b8
run test for traceback module
2021-12-02 14:55:02 +05:30
2433c9572c
Add full pin mux info and use it for I2C
...
All I2C peripherals should be usable now. This also adds pin
in-use tracking and resetting.
Part of #5629
2021-12-01 17:19:57 -08:00
8cf269d2a0
Merge pull request #5634 from dhalbert/board_deinit
...
board_deinit() everywhere
2021-12-01 10:09:14 -08:00
fea0103ff2
Merge pull request #5638 from jepler/test-aesio
...
Test aesio
2021-12-01 10:05:37 -08:00
e8ea9c75a1
check for missing pins; deinit txrx leds
2021-11-30 19:16:21 -05:00
1f1def54b7
add aesio to unix coverage build
2021-11-30 15:25:05 -06:00
57c33059f3
board_deinit() everywhere
2021-11-30 11:00:10 -05:00
9a8d8b1bf1
spresense: Fix time.time()
2021-11-30 12:38:48 +01:00
c13f1d19f5
Update pins to silk pin first.
2021-11-29 17:56:03 -05:00
83de740d1f
kan prezz
2021-11-26 15:13:58 -05:00
c56e33e6c2
woops fix SPI for rev A (will change in rev B to be correct)
2021-11-26 15:06:09 -05:00
3c007ba094
re-add psram!
2021-11-26 13:50:12 -05:00
dddc282e34
update default sdkconfig and correct bootloader offset
2021-11-26 22:44:22 +05:30
554a62955b
Merge branch 'main' into espressif
2021-11-26 22:40:22 +05:30
a9060ec383
cr nl
2021-11-26 00:27:54 -05:00
0cf629bf99
on hey this proto doesnt have psram :(
2021-11-26 00:15:20 -05:00
f06b21e46d
sneaky!
2021-11-25 23:50:33 -05:00
a2c8daeb55
:(
2021-11-25 23:45:37 -05:00
5e0d562cfe
y not?
2021-11-25 23:18:51 -05:00
95c09ac66f
Merge pull request #5610 from tannewt/rpi
...
Initial broadcom port for Raspberry Pi
2021-11-24 19:02:23 -05:00
e6a68cc4a7
Shrink 3 SAMD builds by disabling onewireio
2021-11-24 14:27:49 -08:00
ee5536386d
Merge remote-tracking branch 'adafruit/main' into rpi
2021-11-24 14:23:23 -08:00
2afe599811
Add missing include for zero2w pins.c
2021-11-24 09:43:06 -05:00
e5c125d153
update espressif makefile formatting
2021-11-24 18:14:54 +05:30
7ba5513f9a
update espressif port
...
- update esp-idf to v4.4
- add esp32s3 support
- add analogio on esp32c3
- disable rgbmatrix on all espressif soc
Co-authored-by: Scott Shawcroft <scott@adafruit.com>
Co-authored-by: Seon Rozenblum <seon@unexpectedmaker.com>
2021-11-24 18:01:34 +05:30
927a720de9
Fix I2C and feedback from Dan
2021-11-23 17:23:13 -08:00
f7df39ef88
Re-enable on microbit v2
2021-11-23 13:20:00 -06:00
a1052d5f73
Initial broadcom port for Raspberry Pi
...
This targets the 64-bit CPU Raspberry Pis. The BCM2711 on the Pi 4
and the BCM2837 on the Pi 3 and Zero 2W. There are 64-bit fixes
outside of the ports directory for it.
There are a couple other cleanups that were incidental:
* Use const mcu_pin_obj_t instead of omitting the const. The structs
themselves are const because they are in ROM.
* Use PTR <-> OBJ conversions in more places. They were found when
mp_obj_t was set to an integer type rather than pointer.
* Optimize submodule checkout because the Pi submodules are heavy
and unnecessary for the vast majority of builds.
Fixes #4314
2021-11-22 14:54:44 -08:00
5337e45411
Only enable if not disabled
2021-11-21 11:39:42 -06:00
6d412e20c4
Disabling from some boards
2021-11-20 14:04:49 -06:00
d063bf2675
Initial commit for IS31
2021-11-20 13:46:11 -06:00
3b7d2f1dc3
Merge pull request #5593 from anecdata/ap_extras
...
Set AP MAC address
2021-11-17 10:26:36 -08:00
c2a5ca2fa2
INVERT the sense of the I2C_POWER pin (active low)
...
I don't have the board to test, but this was reported and discussed on Discord.
2021-11-16 14:47:53 -06:00
193e936807
like #5571 , but for AP
2021-11-16 12:21:50 -06:00
582a923ec9
Merge pull request #5579 from jepler/fix-optimization-same54
...
same54: Use the same optimization as other sam d5x/e5x
2021-11-16 08:32:08 -05:00
73430af78b
-O2 without -fno-inline-functions
2021-11-15 22:36:23 -05:00
bd22667eb5
Merge pull request #5571 from anecdata/set_mac
...
Set Station MAC address & validate connect SSID len
2021-11-15 20:33:54 -05:00
Jeff Epler
Kong Wai Weng
MicroDev
Jeff Epler
Dan Halbert
Kattni Rembor
Scott Shawcroft
Scott Shawcroft
Dan Halbert
Kamil Tomaszewski
lady ada
gamblor21
Timon
anecdata