3647cfa424
Create mpconfigboard.mk
2022-07-20 12:17:39 -05:00
d2865764ca
Create mpconfigboard.h
...
Added file.
2022-07-20 12:12:31 -05:00
21af8f42cc
Create board.c
2022-07-20 11:11:49 -05:00
d9f6e99942
Fix RP2040 UART
...
It couldn't receive more than 32 bytes in while checking in_waiting
because in_waiting didn't turn interrupts back on correctly.
Fixes #6579
2022-07-11 13:36:44 -07:00
be3482ff05
Set MICROPY_HW_LED_STATUS pin to the elecfreaks_picoed
2022-07-11 16:51:06 +08:00
dce9396fe3
issue adafruit#6538 loose bounds checking on WAIT PIO instruction
2022-07-02 14:32:20 -07:00
1599844b82
Add some frozen libraries to elecfreaks_picoed
2022-06-29 15:03:29 +08:00
0b80c62400
Merge branch 'adafruit:main' into rp2040-shim
2022-06-22 11:40:02 -05:00
ad56a16c2d
Add board Silicognition LLC RP2040-Shim
2022-06-14 11:28:41 -06:00
9fbad229c0
Add custom board: Electrolama minik (RP2040)
2022-06-14 15:51:10 +01:00
42f05a32a3
Merge branch 'adafruit:main' into main
2022-06-09 08:42:42 +02:00
9c20eb58e9
Merge pull request #6450 from mwisslead/rp2040_pulsein_common_hal_construct
...
Rp2040 pulsein improvements
2022-06-08 08:15:29 -07:00
5c13f844c7
Fixed pre-commit trailing whitespace
2022-06-08 16:43:49 +02:00
91000ea294
Adds support for Challenger RP2040 LoRa boards
2022-06-08 16:38:21 +02:00
2baf476530
Merge pull request #6463 from adafruit/7.3.x
...
Catch main up to 7.3.x
2022-06-06 11:58:05 -07:00
2f0d82a50b
Disable board.SPI() for Challenger NB RP2040 WiFi
...
This was done as a result of an issue with the SPI pin mappings.
Please refer to the following for additional information: https://ilabs.se/challenger-rp2040-wifi-spi-bug
2022-06-06 09:52:23 +02:00
80ae14202a
Merge pull request #6416 from FoamyGuy/display_brightness_pwm
...
display brightness pwm 500hz frequency
2022-06-05 23:52:42 -04:00
ac282b2a73
Merge pull request #6440 from tannewt/translate_header
...
Switch translate() to the header file
2022-06-05 23:50:47 -04:00
a61c4c1af9
Merge pull request #6411 from fabaff/weact-studio-pico
...
Add support for WeAct Studio Pico
2022-06-05 19:17:56 -04:00
7a073317f7
Update PID (0x102E)
2022-06-06 01:03:02 +02:00
260994d16e
Merge branch 'main' into display_brightness_pwm
2022-06-04 11:32:15 -05:00
cbff9dd8e3
add new argument for all boards with built-in display
2022-06-04 11:08:20 -05:00
9d10a3da66
Conditionalize LTO
2022-05-27 12:59:54 -07:00
c3f58193ca
Correctly scale analog reading per issue #4794
2022-05-24 08:46:39 -07:00
0f1973b037
Merge pull request #6418 from solderparty/stamp_round_board
...
Add a Round Carrier board file to the RP2040 Stamp build
2022-05-23 19:42:56 +02:00
2b0518233b
rp2040 PulseIn improvements
2022-05-23 00:45:06 +00:00
893fc66d16
Use common_hal_rp2pio_statemachine_construct for PulseIn
2022-05-23 00:45:06 +00:00
d2d3b27822
Add a Round Carrier board file to the RP2040 Stamp build
2022-05-22 15:52:25 +02:00
e852b28bb2
update pico-sdk to 1.3.1
2022-05-20 17:52:35 -04:00
f63b26c534
address jepler's comments and further squeezes
2022-05-20 10:10:55 -04:00
f1f9ba2371
Add support for WeAct Studio Pico
2022-05-19 23:51:25 +02:00
a01dec1df9
message consolidation and more use of validators
2022-05-19 15:38:37 -04:00
289fdc1241
Added link to library and guide for rp2pio
2022-05-13 11:15:26 -04:00
9743aea7aa
Merge pull request #6334 from BigTuna94/add-rp2.65-f
...
Add new Keyboard - RP2.65-F
2022-05-10 16:52:39 -07:00
bb46898572
Merge pull request #6361 from mwisslead/rp2040_pulsein_buffer_fix
...
Fix buffer issue for rp2040 PulseIn
2022-05-08 12:37:17 -04:00
5f4f66774c
Merge pull request #6360 from jepler/statemachine-improvements
...
Statemachine improvements
2022-05-07 09:35:57 -05:00
561ed3739a
fix the docstrings
2022-05-07 07:49:16 -05:00
34427bd6ba
Update StateMachine.c
2022-05-06 22:36:24 -04:00
b7882edd01
Fix buffer issue for rp2040 PulseIn
2022-05-07 00:57:10 +00:00
b482a732c6
StateMachine: add swap flag
...
Always use DMA if swap flag is enabled.
Improve docs a bit
2022-05-06 15:22:43 -05:00
23c0fc8354
add ability to get, clear txstall flag
...
This can be used to make sure a PIO has actually finished all data
it was schedule to receive via a 'once' background_write
2022-05-06 15:22:43 -05:00
f776749ca3
Key off len, not buf, to decide if anything to DMA
2022-05-06 15:22:43 -05:00
1a9034ff7c
rp2pio: Allow background_write(None) to terminate after complete loop
2022-05-06 15:22:42 -05:00
5edc59f070
Merge pull request #6337 from jepler/property-storage
...
Optimize flash storage of properties
2022-05-06 09:55:18 -04:00
02ec1cebf6
Fix pin mapping for thing plus 2040
...
GPIO 26 was mapped to GPIO 28
2022-05-05 21:11:32 -04:00
a9d929627a
minor comment update
2022-05-05 14:40:49 -05:00
b71ea29a8b
Merge pull request #6330 from KurtE/rp2040_uart_rs485
...
[RP2040] Allow any GPIO pin for RS485 direction pin
2022-05-04 13:32:36 -04:00
7d7986b041
Add NEOPIXEL pin
...
Closes : #6307
2022-05-03 12:21:15 -05:00
510890b207
Enable squeezing property storage in flash
...
.. and enable it on atmel-samd and raspberrypi. On trinket_m0 this saves
96 net bytes of flash. There are 216 bytes actually saved by reducing
the flash storage size of the property descriptors, but added code in
several paths takes back over half of the 'raw savings'.
By organizing the "get-only" and "get-set" (but no delete) properties
each in a different section, we can represent then more efficiently.
Testing performed: that a get-only property can still be gotten but
can't be set or deleted; that a get-set property can sill be gotten or
set but can't be deleted. Tested on pygamer.
Because this requires linker file support, I only enabled it on two of
the ports.
2022-05-03 08:48:53 -05:00
78cf0a90af
Make MP_PROPERTY_GETTER / _GETSET fully declare the property
...
This will enable setting data attributes, namely, the section of the
symbol.
2022-05-03 08:48:53 -05:00
31da335cac
Introduce, use MP_PROPERTY_GETTER, _GETSET
...
Later, these can be changed in cunning ways to save flash storage.
2022-05-03 08:48:52 -05:00
a23ede8bc4
update USB VID/PID codes to match pidcodes request
2022-05-02 19:49:30 -04:00
1fad381513
[RP2040] Allow any GPIO pin for RS485 direction pin
...
As I mentioned in issue #6310 while investigating that the Teensy port
did not support RS485_dir pin on normal GPIO pins, I found that it
was not implemented either as well on some other ports.
So was curious to implement it for RP2040 using same approach as I did
for the MIMXRT in the Pull Request #6328
That is I setup the specified pin as a normal GPIO pin in output mode
and then when you do a write operation it sets the GPIO pin logically
high, and when the write completes I set it logically low.
Note: knowing when I can set it low can be tricky, as you need to make
sure the full output has completed otherwise the data will be corrupted.
I am using: uart_tx_wait_blocking(self->uart);
Which looks like it is supposed to wait until the busy status is no
longer set, which the Reference manual mentioned, but this is leaving
the line logically set longer than I would like.
however I have tried running it with my hacked up version of the
Python Robotis DynamixelSDK and was able to talk to some AX servos.
I did have to change the library slightly for the RP2040, as the
library was erroring out when you did something like uart.read(5)
and it timed out without receiving anything. The RP2040 returned
None whereas I think the Teensy returned an empty set, which is what
it looks like the PySerial original code expects.
Not sure if anyone is interested in this, but thought i would
put it out as PR and see.
2022-04-30 14:31:08 -07:00
63abd9a9cf
Merge pull request #6312 from dhalbert/adjust-neopixel-timings
...
test and adjust NeoPixel timings on multiple ports
2022-04-26 13:18:47 -04:00
3a8fb4e956
Merge pull request #5852 from jepler/floppy
...
Add floppyio
2022-04-26 11:40:19 -04:00
c8e8171cec
Merge pull request #6300 from jepler/pio-continuous
...
rp2040: add a background write with looping to StateMachines
2022-04-26 10:09:02 -04:00
910662e833
Finalised motor 2040 pins
2022-04-26 12:56:31 +01:00
1ccf767112
Merge branch 'adafruit:main' into motor
2022-04-26 10:23:14 +01:00
4eeaf41edc
test and adjust NeoPixel timings on multiple products
2022-04-25 23:12:24 -04:00
1a89a2d366
fix doc build
2022-04-23 13:25:59 -05:00
989fb828d4
Revamp background writing
...
Now a 'once' and a 'loop' buffer can be specified.
'once' is useful for things like writing a neopixel strip in the background,
if you can guarantee the buffer contents are stable until the write is complete.
'loop' is useful for periodic things, like pwm & servos.
both together are useful for some special cases of pwm/servo, where a
transitional waveform needs to be played for one repetition and then
a new waveform needs to be played after that.
The API is renamed to reflect that it's a more generic 'background'
operation.
2022-04-23 13:09:36 -05:00
e8541e866c
fix end of file issue
2022-04-22 15:02:50 +09:00
28296f98f8
update pid
2022-04-22 14:59:28 +09:00
f91be019f6
Merge branch 'adafruit:main' into w5100s-evb-pico
2022-04-22 14:52:04 +09:00
457aba79f4
fix doc build
2022-04-20 08:09:38 -05:00
144eb5dfd4
fix lost DMA IRQ
2022-04-19 16:42:27 -05:00
ebc426d9e6
Remove debug prints, improve docs
2022-04-19 16:39:04 -05:00
b128f180ca
switch to single single dma channel, fix some bugs
2022-04-19 16:33:51 -05:00
33d6d55675
the basics work
...
the sequence has to be a minimum length, 8 entries, but this problem
is not detected. I don't THINK this is an insurmountable problem.
2022-04-19 15:14:50 -05:00
33f5598acc
Stub 'continuous write' functionality
2022-04-19 11:35:43 -05:00
17bba7b17d
remove Adafruit_CircuitPython_BusDevice from frozen modules, it's built in now
2022-04-19 06:49:11 +02:00
9c1b44a030
Modify USB VID and PID of the Pico:ed
2022-04-14 17:42:04 +08:00
b30d2e0889
update w5100s-evb-pico mpconfigboard.h
2022-04-14 14:35:23 +09:00
8cce2e6406
Updated motor pin names
2022-04-12 15:20:28 +01:00
71a7ec6f76
Add ELECFREAKS Pico:ed board.
2022-04-12 16:10:02 +08:00
01cff3c4f8
add MIDI to frozen libs
2022-04-10 14:10:07 -04:00
f7be4345d9
Merge remote-tracking branch 'origin/main' into floppy
2022-04-07 08:37:46 -05:00
769b182da4
Added definition for upcoming Pimoroni motor board
2022-04-07 07:24:55 +01:00
1a329cfd11
Merge pull request #6029 from jepler/pio-wrap
...
raspberry: StateMachine: Add support for wrap=, wrap_target=
2022-04-06 11:55:02 -04:00
76efdfd9a6
initial commit for w5100s-evb-pico
2022-04-06 14:52:28 +09:00
fe98248a3d
Merge remote-tracking branch 'origin/7.2.x' into merge-7.2.x
2022-04-05 08:45:13 -05:00
4cccc1a036
handle clearing both RXIC and RTIC interrupts
2022-04-04 23:55:08 -04:00
f059f7180c
Merge pull request #6208 from ZodiusInfuser/badger
...
Improvement to Badger 2040 operation on battery
2022-03-30 13:35:47 -04:00
336abdfbc7
Switch variable to extern
2022-03-30 17:44:36 +01:00
dd933c7d06
add NeoPixel lib to firmware
2022-03-30 09:17:26 -04:00
f07cfdd80c
Linting fixes
2022-03-28 18:34:39 +01:00
c2fb44b36c
Set enable pin to high during boot
2022-03-28 15:56:02 +01:00
b44a2a0c8e
Updated pin name to match schematic
2022-03-28 14:07:08 +01:00
8e98be2704
Added additional constants
2022-03-24 18:32:39 +00:00
9c81ea86e9
Added board definition for upcoming Pimoroni servo driver.
2022-03-24 16:07:04 +00:00
dcc3ec171e
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2
2022-03-15 13:56:11 -07:00
fd17ba6d91
Merge pull request #6143 from ZodiusInfuser/badger
...
Added built-in display bringup for Badger2040
2022-03-15 13:28:00 -07:00
c919e9c2cc
fix duplicate reference names for DSN export
2022-03-14 21:02:14 -04:00
af2862ead9
Removed trailing whitespace
2022-03-14 22:28:28 +00:00
a778469082
Inverted the display pixels to match the expected CPY behaviour
2022-03-14 11:12:03 +00:00
f13d218749
Merge pull request #6125 from tannewt/usb_host
...
Start of USB host API
2022-03-11 21:41:28 -05:00
eab5f00548
Added built-in display bringup for Badger2040
2022-03-11 20:10:42 +00:00
e4cd9690f1
rework auto-reload delay logic
2022-03-11 14:03:04 -05:00
1c8f671f0a
Merge pull request #6118 from pewpew-game/parallel-reset-optional
...
paralleldisplay: reset and read pins should be optional
2022-03-08 09:34:25 -05:00
83593a1558
Start of USB host API
...
This allows you to list and explore connected USB devices. It
only stubs out the methods to communicate to endpoints. That will
come in a follow up once TinyUSB has it. (It's in progress.)
Related to #5986
2022-03-07 18:07:25 -08:00
236ebba0ca
melopero_shake_rp2040: Add missing BOARD_DICT_STANDARD_ITEMS
2022-03-08 08:58:32 +11:00
b69a06b2ed
Also fix the read pin in the atmel and rp2040 ports
2022-03-06 11:33:07 +01:00
d66cf1d8ef
Name fix
2022-02-21 11:26:43 +00:00
d0bbaddcb3
Board definitions for upcoming EInk board
2022-02-21 11:23:55 +00:00
729fcf749e
Fix doc markup
2022-02-15 16:03:52 -06:00
a58bf235d8
raspberry: StateMachine: Add support for wrap=, wrap_target=
2022-02-13 16:38:53 -06:00
22928fec55
Explain read and write size to/from PIO FIFOs
2022-02-10 10:55:04 -08:00
da035fe958
Merge pull request #5990 from sgauche/stm_spi_3wire
...
Add support for half-duplex SPI to CPy
2022-02-09 13:11:37 -05:00
a8d8651873
Canonical C style for half_duplex = true/false
2022-02-08 23:13:22 -05:00
309f4fb2b9
add half_duplex false param to spi construct function call in some board files
2022-02-08 22:59:26 -05:00
89ad767b8f
add half_duplex to spi constructs in other ports but raise not implemented errors
2022-02-08 22:25:23 -05:00
ce191327e8
RP2040 PDMIn frequency based on sample rate
2022-02-08 10:10:02 -06:00
1c17dc9348
ports/raspberrypi/common-hal/busio/SPI.c
2022-02-07 17:07:47 -05:00
566f8bed99
Merge pull request #5984 from DavePutz/issue_5967
...
Correcting order of sideset parameters in function call
2022-02-05 21:58:30 -05:00
8c10148b21
Correcting order of sideset parameters in function call
2022-02-05 16:15:12 -06:00
07e710b0a0
Merge remote-tracking branch 'origin/main' into floppy
2022-02-04 09:01:36 -06:00
6a7742ba88
Merge remote-tracking branch 'origin/main' into floppy
2022-02-04 09:00:32 -06:00
749bb99863
bump pico-sdk to 1.3.0
2022-02-02 17:15:33 -06:00
a04cd6444b
Merge pull request #5966 from Neradoc/add-alias-stemma-i2c
...
Add alias board.STEMMA_I2C for all boards with qwiic/stemma/QT
2022-02-02 11:08:13 -05:00
b2c8fd3938
add board.STEMMA_I2C alias to some boards
2022-02-02 01:18:46 +01:00
bf57f3606a
rp2pio: Add pull up/down support for the "jmp pin"
...
This is needed so that the floppy flux reader can enable the pull up
on the index pin while using it as a pio jmp pin.
Also fixes a doc bug where the `jmp_pin` was omitted in one spot in the docs.
2022-02-01 10:19:17 -06:00
cc410ad6a3
common-hal I2C combined write_read
2022-01-31 22:03:30 -05:00
5933c04499
Merge pull request #5899 from tannewt/rp2040_winbond
...
Add winbond to Feather RP2040
2022-01-21 16:44:52 -05:00
c598ede84e
Add winbond to Feather RP2040
2022-01-21 10:34:38 -08:00
67293c265c
Merge branch 'main' into board-bus
2022-01-21 10:08:39 +05:30
13db65566d
ESP NeoPixel fixes
...
This tweaks the RMT timing to better match the 1/3 and 2/3 of 800khz
guideline for timing. It also ensures a delay of 300 microseconds
with the line low before reset.
Pin reset is now changed to the IDF default which pulls the pin up
rather than CircuitPython's old behavior of floating the pin.
Fixes #5679
2022-01-19 16:29:07 -08:00
8e895e1986
Add floppyio for rp2040
...
Tested on RP2040 Feather with a 3.5" Prodigy diskette, the whole
surface reads 100% across 3+ trials.
2022-01-17 16:34:47 -06:00
784a5edc4b
Define default SPI pins on kb2040
...
Fixes #5875
2022-01-17 06:52:08 +01:00
db5f99c63e
Add a function to get low level register access
...
The port is free to return NULL for any/all of these, and the caller has
to check.
This will be used in the floppy code, because aside from getting the
registers, it looks like all is independent of MCU.
2022-01-13 15:29:03 -06:00
ae58858036
Merge pull request #5820 from CharString/waveshare_rp2040_zero
...
Waveshare RP2040-Zero board definition
2022-01-12 10:56:55 -08:00
8226fb8e0b
Bring pins in line with board documentation.
...
This brings the pins in line with the documented [pinouts]. The only
"special" pins:
- GP0, GP1 are mentioned as the default UART, so we init them as
such and give them the TX and RX alternative names.
- GP16 is connected to the onboard neopixel DIN line and we assign it
the NEOPIXEL name. (Power of the neopixel is connected to the 3.3V
rail, not a pin. See [schematic].)
- GP26, GP27, GP28, GP29 have unambiguous ADC designations in the
[pinouts], so we assign the `A` analogue names as the Pico board
definition does.
[pinouts]: https://www.waveshare.com/wiki/RP2040-Zero#Pinouts
[schematic]: https://www.waveshare.com/w/upload/4/4c/RP2040_Zero.pdf
2022-01-12 12:27:54 +01:00
9b825869c5
raspberrypi : Check UART before claiming pins, claim it after
...
Co-authored-by: Scott Shawcroft <scott@adafruit.com>
2022-01-11 22:02:47 +01:00
2251d0f4b0
raspberrypi: Claim UART after checking pins
...
If, for some reason, you mix up TX and RX when calling `busio.UART` (who would do that ;) ), you get `Invalid pins`. When you go to try again, you'll get `All UART peripherals are in use` because the interface was claimed as busy before pins are verified. This should fix that issue.
2022-01-11 15:13:36 +01:00
e23b272595
Added missing LDO control pin (SARA_PWR)
2022-01-08 16:39:48 +01:00
783106545c
Remove LED pin.
...
There's just the NEOPIXEL on this board, no other LED.
2022-01-07 23:25:50 +01:00
d8f18d36a4
Initial Waveshare RP2040-Zero board definition
...
`board.NEOPIXEL` works. Once you have an LED cycling colours, you're 99%
done. :-)
2022-01-07 23:20:10 +01:00
9d2a32d07e
countio: add selectable rise and fall detection, pulls
2021-12-31 16:34:58 -05:00
8aafc734a4
Merge pull request #5789 from adafruit/7.1.x
...
Merge latest changes from 7.1.x
2021-12-28 18:12:29 -05:00
08d09ac493
Merge pull request #5613 from jepler/issue5418
...
clear out interrupt when freeing the timer
2021-12-28 10:57:58 -08:00
3bc48802b1
Merge pull request #5783 from jepler/longint-config
...
Centralize LONGINT_IMPL handling
2021-12-28 12:55:26 -05:00
1986d2ee71
clear out interrupt flags when disabling timer too
2021-12-27 16:42:41 -06:00
f5fa4ae237
Merge pull request #5764 from dannystaple/patch-1
...
Fix RST formatting for readthedocs
2021-12-27 09:41:46 -07:00
1d13c4ccd1
Centralize LONGINT_IMPL handling
...
This closes #5782
2021-12-27 10:21:47 -06:00
c1236fb4d6
Merge pull request #5766 from tannewt/rp2040_sideset_enable
...
Add sideset_enable support to PIO
2021-12-22 20:17:33 -07:00
827ad327a5
Only ignore warnings if in gcc >= 11
2021-12-22 18:21:18 -08:00
674c845fb6
Merge pull request #5760 from jepler/rename_under_typing
...
circuitpython_stubs: Use `circuitpython_typing` for cp-specific typing
2021-12-22 14:05:04 -08:00
3e13d4f5b5
Add sideset_enable support to PIO
...
This allows for UART TX via PIO
2021-12-22 12:00:19 -08:00
166793f843
circuitpython_stubs: Use `circuitpython_typing` for cp-specific typing
...
Installing stubs for a module named `_typing` seems like a dubious
decision.
2021-12-22 11:14:21 -06:00
174a2cbf25
Fix RST formatting for readthedocs
...
And also a typo/grammar thing.
2021-12-22 17:03:58 +00:00
7c2e7bfeaa
Add alternative clock pin name to match silkscreen
2021-12-15 14:41:42 -08:00
Benjamin Shockley
Scott Shawcroft
Xu Hao
Nick Lopez
Patrick Van Oosterwijck
Omer Kilic
Pontus Oldberg
Nathan Young
Dan Halbert
Fabian Affolter
foamyguy
Paint Your Dragon
arturo182
Michael Wisslead
Dan Halbert
Alec Delaney
Jeff Epler
Guy Dupont
Zach Richard
KurtE
ZodiusInfuser
ViktorWiz
Neradoc
ViktorWiz
Michael Himing
Radomir Dopieralski
Scott Gauche
root
microDev
Neradoc
Scott Shawcroft
Chris Wesseling
arturo182
Chris Wesseling
Jeff Epler
Danny Staple