0ab4df6f2f
shrink some SAMD21 builds, and nrf simmel
2021-09-14 17:10:49 -04:00
81e28308c2
Revert "turn off inline-unit-growth and max-inline-insns-auto uses"
...
This reverts commit 94d76e0f48
2021-09-14 16:56:04 -04:00
94d76e0f48
turn off inline-unit-growth and max-inline-insns-auto uses
2021-09-14 12:15:21 -04:00
aa1d089cdb
proxlight: Freeze adafruit_adps9960 instead of adafruit_hid; enable usb_midi
2021-09-10 14:50:09 -04:00
8625e53817
change board dicts to include a common macro with __name__
2021-09-03 21:03:55 +02:00
d526925d49
make aesio module full build dependent
2021-09-02 19:02:01 +05:30
0d280fa83c
Two fixes, one for ble workflow, one for linking
...
BLE workflow had an incorrect list size for characteristics
Linking didn't advance . link it should have without extra ().
2021-09-01 12:43:43 -07:00
cd5acae4f4
Sort .text section to reduce fill
2021-08-31 18:04:01 -07:00
771b4c7464
Add two space saving knobs
...
* Reduce the number of supported HID reports of IDs per descriptor.
This saves ~200 bytes in the default HID objects.
* (Not enabled) Compute QSTR attrs on init. This trades 1k RAM for
flash. Flash is the default (1).
2021-08-31 13:02:34 -07:00
838d30b3a4
Fix incorrect macros
2021-08-30 14:40:14 -07:00
8f024316ad
explicitly disable paralleldisplay on a few boards
2021-08-29 07:33:54 -05:00
7520feed1c
Move ParallelBus to its own module
2021-08-29 07:33:54 -05:00
4d05bb26bf
change board.ID to board.board_id
2021-08-26 23:11:55 +02:00
b14b294516
add board.ID
2021-08-26 23:11:55 +02:00
6d49a9f0c5
Merge pull request #5205 from jepler/deprecate-vertical-scroll
...
Deprecate Display's constructor arg set_vertical_scroll
2021-08-23 12:52:12 -07:00
935888927e
Merge pull request #5196 from dhalbert/samd-audio-fixes
...
improve SAMD audio DMA
2021-08-23 10:27:59 -07:00
379461df7d
Deprecate Display's constructor arg set_vertical_scroll
2021-08-23 09:17:59 -05:00
57841dc92b
Merge pull request #5171 from tannewt/unicode_filenames
...
Turn on unicode for FATFS
2021-08-21 16:31:54 -04:00
046372d840
put back some dynossat_edu_obc pins
2021-08-21 16:14:09 -04:00
b8b23c97d9
improve SAMD audio DMA
2021-08-21 14:34:37 -04:00
208ec71372
Merge pull request #5190 from jepler/issue4883
...
samd: diagnose out of range I2C frequency
2021-08-21 08:00:50 +05:30
f6d1caabc9
Merge pull request #5182 from tannewt/fix_imx
...
Check background pending before sleep
2021-08-21 08:00:10 +05:30
26d33658ea
samd: diagnose out of range I2C frequency
...
The frequency divisor is limited to 255, which gives 48MHz/2/255 ~= 94.1kHz as
the lowest speed.
Without this change, values below this cut-off gave higher frequencies instead,
which didn't appear to have any relation to the frequency value requested.
Closes : #4883
2021-08-20 15:22:35 -05:00
9f051ec7bf
Fix usb calibrated SAMD21 builds
2021-08-20 12:45:59 -07:00
5c6e80a2bb
Shrink builds by defining advanced micropython API
...
Also, ignore more pins on SAMD boards and disable EXFAT on others.
2021-08-19 16:49:33 -07:00
d2860b58b0
Check background pending before sleep
...
There is a race between when we run background tasks and when we
sleep. If an interrupt happens between the two, then we may delay
executing the background task. On some ports we checked this for
TinyUSB already. On iMX RT, we didn't which caused USB issues.
This PR makes it more generic for all background tasks including
USB.
Fixes #5086 and maybe others.
2021-08-19 12:18:13 -07:00
cabe96e188
canio: Run background tasks while waiting for message reception
...
Closes : #5004
2021-08-18 11:39:40 -05:00
e0ce5ff045
Fix some builds by disabling exfat
2021-08-18 08:22:29 -07:00
5b0009cbc4
Merge pull request #5151 from dhalbert/usb_hid-changes
...
Support multiple reports per device in usb_hid
2021-08-17 17:14:28 -04:00
a77e269121
cp_sapling_m0_revb: board.UART not board.uart
...
This is the only board that didn't match the all-uppercase convention for these UART (and more generally, these bus) entries.
2021-08-16 17:07:17 -05:00
f37e1d7bf5
squeeze a couple of boards
2021-08-14 17:36:05 -04:00
3ffab36cdc
Merge remote-tracking branch 'adafruit/main' into fix_samd_timer_leak
2021-08-13 15:20:25 -07:00
de796e2304
Move OneWire to `onewireio` from `busio`
...
This will allow finer grained inclusion in 8.0.0
Fixes #5135
2021-08-12 10:47:14 -07:00
fb6b438580
Make `getpass` and `traceback` full build only
...
This leaves much more space on SAMD21 builds that aren't "full builds".
These are new APIs that we don't need to add to old boards.
Also, tweak two Arduino boards to save space on them.
2021-08-11 14:47:35 -07:00
0c1d6cef75
Merge remote-tracking branch 'adafruit/main' into fix_cp_irremote
2021-08-11 13:43:59 -07:00
0632a1e681
Merge pull request #5060 from cdwilson/cdwilson/circuitpython/sparkfun-stm32f405-micromod
...
stm/boards: Add support for SparkFun STM32 MicroMod Processor board.
2021-08-11 12:19:16 -07:00
7f016ae11e
Fix build with filter to do OR
2021-08-11 12:10:51 -07:00
083960ce90
Fix SAMD51 builds and Prox Trinkey
...
Adds CIRCUITPY_BUSIO_UART to disable UART by raising ValueError
that no pins work.
2021-08-11 11:53:26 -07:00
ebf0901558
Merge pull request #5079 from dhalbert/debug-audio
...
Fix various RP2040 and SAMD audio issues
2021-08-11 11:19:53 -07:00
b56455ffbb
Allow sleep while paused
2021-08-11 10:48:39 -07:00
67c6932ca2
Reset timers separate from pwmio
...
This prevents timer leakage on builds without pwmio.
Fixes #5057
2021-08-11 09:58:31 -07:00
f0859ac954
Switch SAMD21 ticks to PER event
...
The EVSYS is used to generate an interrupt from the event. This
simplifies timing used in pulseio that conflicted with the
auto-reload countdown.
Fixes #3890
2021-08-10 15:23:45 -07:00
e741330ca8
Consistent pin naming for SparkFun MicroMod processor boards.
2021-08-09 23:10:52 -07:00
93c9d59960
Merge branch 'main' into getpass
2021-08-10 01:00:10 +05:30
2451c788f4
valid channels in audio_dma_stop; cleaner supervisor_ticks mgmt in keypad
2021-08-09 09:47:13 -04:00
59b89fdc5c
Fix various audio DMA issues:
...
RP2040 and SAMD51:
- Detect when DMA has finished, and stop DMA audio explicitly.
- Do not accidentally reuse `first_buffer` supplied by WaveFile or RawSample. Always realloc `first_buffer` and `second_buffer`
RP2040:
- When audio playing is stopped, write a final zero to the output register. This prevents residual PWM tones.
- Handle buffer size for 8-bit samples properly for 16-bit output.
- Fail on some edge cases (which may not be possible at the moment).
2021-08-09 09:47:13 -04:00
fd71d924d2
partial buffer mgmt fix
2021-08-09 09:47:13 -04:00
51f8603783
add getpass module
2021-08-09 17:50:28 +05:30
579194a543
Colocated board.LED and D13 together (GCM4)
2021-08-09 05:35:38 +02:00
a15ac65fa0
Add board.LED for Grand Central M4 Express
...
Fixes #5111
2021-08-08 21:43:12 +02:00
Dan Halbert
Neradoc
microDev
Scott Shawcroft
Jeff Epler
Scott Shawcroft
Dan Halbert
Ryan A. Pavlik
Chris Wilson
Nathan Young