Commit Graph

14009 Commits

Author SHA1 Message Date
Jim Mussared f4fed02537 unix/variants: Remove freedos and fast variants.
The freedos variant is untested by CI and is difficult to maintain.  The
fast variant is not a good name for what it does.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-13 17:37:55 +10:00
Jim Mussared 605266ee9a py/mpconfig: Make feature levels available to mpconfigport.h.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-13 17:37:49 +10:00
Jim Mussared 89a0fefb6c py/mpconfig: Add LFS1/LFS2 options to match FAT/posix.
Also fixes the #ifndef for FAT & posix.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-13 17:37:32 +10:00
Wind-stormger 57fd66b80f tools/pyboard.py: Support Windows pathname separators.
Addresses issue #9132.
2022-09-13 13:28:39 +10:00
Andrew Leech 2d4e7e99bf samd/mpconfigport: Enable MICROPY_ENABLE_FINALISER when VFS is used. 2022-09-13 13:08:32 +10:00
Andrew Leech afc7e1d298 zephyr/mpconfigport: Enable MICROPY_ENABLE_FINALISER when VFS is used. 2022-09-13 13:08:03 +10:00
Andrew Leech 86676a43aa unix/mpconfigport: Enable MICROPY_ENABLE_FINALISER when VFS is used. 2022-09-13 13:06:56 +10:00
Andrew Leech 4e0964b59f extmod/vfs: Add finaliser to ilistdir to close directory handle.
When iterating over filesystem/folders with os.iterdir(), an open file
(directory) handle is used internally.  Currently this file handle is only
closed once the iterator is completely drained, eg. once all entries have
been looped over / converted into list etc.

If a program opens an iterdir but does not loop over it, or starts to loop
over the iterator but breaks out of the loop, then the handle never gets
closed.  In this state, when the iter object is cleaned up by the garbage
collector this open handle can cause corruption of the filesystem.

Fixes issues #6568 and #8506.
2022-09-13 13:00:42 +10:00
Andrew Leech 582b3e4e78 py/objpolyiter: Add a new polyiter type with finaliser support. 2022-09-13 13:00:25 +10:00
Jim Mussared 4903e48e34 tools/makemanifest.py: Force the repo version of the mpy_cross package.
In case the version from pypi is installed or some other version is
available in sys.path, prepend `$(TOP)/mpy-cross` to sys.path instead.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-09 18:12:55 +10:00
Damien George 1d4228ccc1 zephyr/boards: Add config for bbc_microbit_v2.
This enables the bluetooth module.  GAP scanning and advertising works.

Signed-off-by: Damien George <damien@micropython.org>
2022-09-09 14:14:31 +10:00
Jim Mussared cacc96d98c extmod/modbluetooth: Replace def_handle with end_handle in char IRQ.
This is technically a breaking change, but:
a) We need the end handle to do descriptor discovery properly.
b) We have no possible use for the existing definition handle in the
characteristic result IRQ. None of the methods can use it, and therefore
no existing code should be using it in a way that changing it to a
different integer value should break.

Unfortunately NimBLE doesn't make it easy to get the end handle, so also
implement a mechanism to use the following characteristic to calculate
the previous characteristic's end handle.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-09 11:24:24 +10:00
Jim Mussared 82fc16f298 extmod/modbluetooth: Fix descriptor registration with empty tuple.
Incorrect use of "continue" when the tuple was length zero meant it
broke the rest of the argument handling.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-09 11:24:21 +10:00
Jim Mussared 6e75d177e7 stm32/boards/PYB: Fix handling of BOARD_VARIANT selection.
The matches should not have been quoted.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:54:48 +10:00
Jim Mussared 9070a24940 tools/autobuild: Use distinct directory for building stm32 variants.
Previous the build directory just used the board name, now make it use the
variant name too.

This shouldn't have any change because the existing directory should not
exist (all builds run by these scripts remove their build directory after
completion), but it makes debugging easier.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:54:11 +10:00
Jim Mussared dec0ff7a10 rp2/boards: Remove all I2C,SPI pin defs that already match pico-sdk.
I.e. for whichever SPI/I2C instance is PICO_DEFAULT_I2C, there's no need to
set MICROPY_HW_SPIn_SCK.

The only ones remaining are for the non-default instance.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:51:15 +10:00
Jim Mussared 315e74236f rp2/machine_i2c: Use pico-sdk's default pins for I2C.
Inherits the default values for whichever instance is PICO_DEFAULT_I2C.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:51:11 +10:00
Jim Mussared 29437205f2 rp2/machine_spi: Use pico-sdk's default pins for SPI.
Rather than hardcoding the defaults, use pico-sdk's board definition.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:51:04 +10:00
Jim Mussared c364301817 rp2/boards: Set PICO_BOARD correctly for each board.
In most cases, it's calculated automatically from the board name, and so
doesn't need to be set at all.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 14:50:54 +10:00
Phil Howard 6aa3c94634 rp2/rp2_flash: Add start/len support to rp2.Flash() constructor.
This allows support for partitioned flash on rp2 boards.

See issue #9208.

Signed-off-by: Phil Howard <phil@gadgetoid.com>
2022-09-08 14:37:41 +10:00
Jim Mussared 24678fe452 drivers: Remove drivers that are now in micropython-lib.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 11:27:05 +10:00
Jim Mussared d84c6ef0e8 ports: Use micropython-lib version of drivers in manifests. 2022-09-08 11:27:05 +10:00
Jim Mussared aeff6911d7 lib/micropython-lib: Update submodule to latest.
This brings in the drivers and libraries that were previously in this
repo.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-08 11:27:00 +10:00
Jeff Epler e90b85cc98 extmod/modure: Convert byte offsets to unicode indices when necessary.
And add a test.

Fixes issue #9202.

Signed-off-by: Jeff Epler <jepler@gmail.com>
2022-09-06 17:08:18 +10:00
yn386 719dbbf563 stm32/boards: Add alternate function list for STM32F446RE.
Signed-off-by: Damien George <damien@micropython.org>
2022-09-06 16:55:24 +10:00
yn386 989b8c728b stm32/timer: Fix use of timer channel callback() method on L4 MCUs.
Since L4 HAL version 1.17.0, HAL_TIM_IC_Start_IT() checks whether specified
channel of timer is busy or not, which is the case if this function is
called more than once without first calling HAL_TIM_IC_Stop_IT().  The fix
in this commit is to call the stop function before calling start.  The PWM
and OC modes have the same issue with the same fix.

Fixes issue #8732.
2022-09-06 16:35:46 +10:00
yn386 da50827657 stm32/pyb_i2c: Fix pyb.I2C to work with dma=True on F4 MCUs.
Prior to this commit, excuting this code:

    i2c = I2C(1, I2C.CONTROLLER, dma=True)
    i2c.send(data, addr=i2c_addr)

the call to i2c.send() does not return and the board needs a reset.  This
code works when dma=False.

According to the specification, I2Cx_EV_IRQHandler should:
- Write DR to address when Start condition generated.
- Clear ADDR by reading SR2 after reading SR2 when address sent.

These processes are included in HAL_I2C_EV_IRQHandler(), however the
firmware size increses about 2KB if HAL_I2C_EV_IRQHandler is called.  This
commit adds above processes to i2c_ev_irq_handler, and increases firmware
by less than 100 bytes.

Fixes issue #2643.
2022-09-06 16:13:47 +10:00
yn386 8770cd2f4d stm32/adc: Make ADCAll.read_channel reject invalid channels.
pyb.ADC(channel) checks whether specified channel is valid or have ADC
capability but pyb.ADCAll().read_channel() does not.

This change adds checking whether specified channel is valid and throw
ValueError if channel is invalid.  This is same as pyb.ADC().
2022-09-06 15:22:16 +10:00
Damien George 4e4c28bf27 stm32/boards: Only freeze LCD160CR driver in PYB board firmware.
Although this driver and associated hardware can be used on any board, it
makes to only freeze it for PYB and PYBD boards.  It can be easily copied
to any board if needed.

Fixes issue #8056.

Signed-off-by: Damien George <damien@micropython.org>
2022-09-06 12:53:46 +10:00
Damien George 655c29351a drivers/display: Don't include tests by default.
The tests can be copied to the board if needed.

Also update the docs to reflect this change.

Signed-off-by: Damien George <damien@micropython.org>
2022-09-06 12:09:20 +10:00
Jim Mussared fb20dbe4d1 stm32/boards/LEGO_HUB_NO6: Update manifest to new format.
This was added after 203dae41f and missed in the rebase.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-06 10:57:33 +10:00
Jim Mussared 203dae41fb all: Update all manifest.py files to use new features.
Changes in this commit:
- Manifest include's now use the directory path where possible (no longer
  necessary to include the manifest.py file explicitly).
- Add manifest.py for all drivers and components that are referenced by
  port/board manifests.
- Replace all uses of freeze() with package()/module(), except for port and
  board modules.
- Use opt=3 everywhere, for consistency and to reduce code size.
- Use require() instead of include() for all micropython-lib references.
- Remove support for optional board-level manifest.py in mimxrt port, to
  make it behave the same as other ports (the board must set
  FROZEN_MANIFEST to a custom manifest.py, which can optionally include the
  default, port-level manifest).
- Also reinstates modules that were accidentally removed from the esp8266
  512k build in fbe9417b90.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
Signed-off-by: Damien George <damien@micropython.org>
2022-09-05 18:43:18 +10:00
Damien George ccd210984e lib/micropython-lib: Update to latest version with manifest changes.
Signed-off-by: Damien George <damien@micropython.org>
2022-09-05 18:24:27 +10:00
Jim Mussared 5852fd7708 tools/manifestfile.py: Allow manifests to set metadata.
The metadata can be version, description, and license.

After executing a manifest, the top-level metadata can be queried, and also
each file output from the manifest will have the metadata of the
containing manifest.

Use the version metadata to "tag" files before freezing such that they have
__version__ available.
2022-09-05 17:07:13 +10:00
Jim Mussared bc23f207ce tools/manifestfile.py: Allow require() to specify unix packages.
By default, don't include micropython-lib/unix-ffi in the search.

If unix_ffi=True is passed to require(), then include unix-ffi and make it
take precedence over the other locations (e.g. python-stdlib).

This does two things:
 - Prevents non-unix builds from using unix-only packages.
 - Allows the unix build to optionally use a more full-featured (e.g. ffi)
   based package, even with the same name as one from e.g. stdlib.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-05 17:06:52 +10:00
Jim Mussared e9a28ce312 tools/manifestfile.py: Allow include of directory path.
If an include path is a directory, then it implicitly grabs the manifest.py
file inside that directory. This simplifies most manifest.py files.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-05 17:06:52 +10:00
Jim Mussared 6bd0ec7a70 tools/makemanifest.py: Update to use mpy_cross module.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-05 17:06:43 +10:00
Jim Mussared e42809531f mpy-cross/mpy_cross: Add Python wrapper for mpy-cross.
Rather than invoking mpy-cross directly via system/subprocess in our build
tools and other tools, this provides a Python interface for it.

Based on https://gitlab.com/alelec/mpy_cross (with the intention of
eventually replacing that as the "official" pypi distribution once setup.py
etc are added).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-05 17:06:09 +10:00
Jim Mussared f3cdb052db tools/manifestfile.py: Add library for working with manifests.
This splits the manifest file loading logic from makemanifest.py and
updates makemanifest.py to use it.

This will allow non-freezing uses of manifests, such as defining packages
and dependencies in micropython-lib.

Also adds additional methods to the manifest "API":
 - require() - to get a package from micropython-lib.
 - module() - to define a single-file module
 - package() - to define a multi-file package

module() and package() should replace most uses of freeze() and can also
be also used in non-freezing scenarios.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-05 17:00:43 +10:00
Jim Mussared da7f2537a1 top: Use micropython-lib unconditionally in manifests.
micropython-lib is now a submodule, and the manifest compilation process
will ensure it is available, so manifests no longer need to check that it
is available.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-09-05 17:00:43 +10:00
robert-hh 0b26efe73d extmod/machine_i2c: Call MICROPY_PY_EVENT_HOOK during i2c.scan().
Avoiding a watchdog reset during i2c.scan() if the hardware is not properly
set up (eg on esp8266), and also allowing to stop the scan with a
KeyboardInterrupt.

Fixes issue #8876.
2022-08-31 12:06:11 +10:00
Takeo Takahashi af100b7029 docs/renesas-ra: Add pin drive keyword argument description.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
2022-08-31 12:01:38 +10:00
Takeo Takahashi 2f2fd36713 tests/renesas-ra: Update pin test to support all boards.
Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
2022-08-31 12:00:41 +10:00
Takeo Takahashi 621bff8557 renesas-ra/machine_pin: Support drive keyword and fix GPIO setting.
Changes are:
- Support drive= keyword argument.
- Fix trigger keyword check.
- Fix GPIO pin setting.

Signed-off-by: Takeo Takahashi <takeo.takahashi.xv@renesas.com>
2022-08-31 11:59:49 +10:00
hoihu 85a25895ff rp2/mbedtls: Fix missing time.h include. 2022-08-31 00:22:34 +10:00
robert-hh b74eeee5e0 docs/library/machine.UART: Add docs for uart.flush() and uart.txdone(). 2022-08-31 00:20:44 +10:00
robert-hh a39b88f0fb cc3200/mods/pybuart: Implement uart.flush() and uart.txdone().
uart.flush()

flush() will wait until all characters have been sent.
To avoid a permanent lock, a timeout applies depending on the
size of FIFO and the baud rate.

ret = uart.txdone()

ret is True if no transfer is in progress.
ret is False otherwise.
2022-08-31 00:18:49 +10:00
robert-hh cc0249c936 nrf/modules/machine/uart: Implement uart.flush() and uart.txdone().
Since uart.write() of the nrf port waits until all bytes but the last
one have been sent, uart.flush() and uart.txdone() are implemented
as empty functions to provide API consistency.

uart.flush()

flush() will always return immediately, even if the last byte
may still be sent.

ret = uart.txdone()

uart.txdone() will always return True, even if the last byte
may still be sent.
2022-08-31 00:18:40 +10:00
robert-hh 8ea6fefc6d stm32/machine_uart: Implement uart.flush() and uart.txdone().
Since uart.write() of the STM32 port waits until all bytes have
been sent, uart.flush() and uart.txdone() are implemented as empty
functions to provide API consistency.

uart.flush()

flush() will always return immediately.

ret = uart.txdone()

uart.txdone() will always return True.
2022-08-31 00:18:35 +10:00
robert-hh 8804993d0f esp8266/machine_uart: Implement uart.flush() and uart.txdone().
uart.flush()

flush() will wait until all characters but the last one have been sent.
It returns while the last character is sent. If needed, the calling
code has to add one character wait time. To avoid a permanent lock,
a timeout applies depending on the size of the FIFO and the baud rate.

ret = uart.txdone()

ret is True if no transfer is in progress. It returns already True when
the last byte of a transfer is sent.
ret is False otherwise.
2022-08-31 00:18:27 +10:00