397b705647
extmod/modwebsocket: Reset mask between packets.
2016-04-09 12:29:18 +03:00
7e9182f3aa
extmod/modwebsocket: Make sure to propagate EOF.
2016-04-08 20:26:54 +03:00
b32b0d38fe
unix: freedos strip and size names for binaries
...
After this you need only one path for build (path/to/djgpp/bin). Original patch made by @dhylands
2016-04-08 20:15:37 +03:00
20d9bc2d76
extmod/modure: re_exec() renamed to ure_exec() due to collison in 4.3BSD.
...
Addresses issue #1972 .
2016-04-08 20:12:03 +03:00
05ba2433f6
extmod/modwebsocket: Properly check number of args to constructor.
2016-04-08 16:05:48 +03:00
5e919b7ef8
lib/axtls: Update to the latest upstream master.
2016-04-08 15:19:57 +03:00
9c04299da1
docs: esp8266: Enable "machine" module docs.
...
The docs are still heavily biased towards WiPy, so will need a lot of
exclusions.
2016-04-07 16:44:10 +03:00
5e7fa7c80c
docs/ubinascii: Document non-standard "sep" argument to hexlify().
2016-04-07 12:39:00 +03:00
8a8e775035
stmhal: Consistently enable USB SOF Irqs for all USB modes (FS and HS).
...
SOF irqs are now standard for rx/tx USB transfers, so enable them for both
FS and HS modes. Fixes #1944 .
2016-04-07 09:23:33 +01:00
04d5e644fc
py/objarray: Fix array.append so it doesn't extend if append fails.
...
Addresses issue #1965 .
2016-04-07 09:03:33 +01:00
2c915e1ae6
py: Implement basic with support in native emitter.
2016-04-07 08:53:24 +01:00
ce8b4e8749
py: Combine continuous block of emit steps into with_cleanup emit call.
...
Because different emitters need to handle with-cleanup in different ways.
2016-04-07 08:50:38 +01:00
2c407bcf20
esp8266: Switch from terse error messages to normal ones.
...
Adds 2k to the code size.
2016-04-07 00:38:08 +03:00
d85439fd19
esp8266/README: Add short troubleshooting section.
2016-04-07 00:21:04 +03:00
1a0a323ca8
esp8266: Add initial implementation of machine.UART.
...
Currently UART(0) and UART(1) are exposed and only uart.write works.
2016-04-06 19:45:52 +03:00
4e51a3038c
cc3200/mods/modwlan: Include stream.h after recent refactor.
2016-04-06 01:18:39 +03:00
96eca22322
esp8266: Make destination for vendor OS debug output soft-configurable.
...
Use esp.osdebug(None) to disable, or esp.osdebug(uart_id) to send output
to a UART.
2016-04-06 00:12:58 +03:00
e6a4d4e23c
py: Move stream-related declarations from obj.h to stream.h.
2016-04-05 22:06:52 +03:00
e4cb7c6158
docs/esp8266/quickref: Add note about physical vs logical pin numbers.
2016-04-05 16:30:51 +03:00
2c8356c482
esp8266/modnetwork: require_if(): Report the actual interface required.
2016-04-05 16:09:03 +03:00
f81ea6307c
docs/ubinascii: Document a2b_base64(), b2a_base64().
2016-04-05 14:00:12 +03:00
de12502d89
esp8266: Move pyb.unique_id() to machine.unique_id().
2016-04-05 00:57:49 +03:00
81fd5685fc
esp8266: Move pyb.hard_reset() to machine.reset().
2016-04-05 00:20:25 +03:00
1b811b946e
unix/modsocket: Use mp_const_empty_map instead of creating empty map.
2016-04-04 23:43:16 +03:00
069654f2be
py/obj.h: Add comment why mp_fun_kw_t takes non-const mp_map_t*.
...
mp_fun_kw_t takes mp_map_t* (and not const mp_map_t*) to ease passing
this arg to mp_map_lookup(), which may modify its arg, depending on
flags.
2016-04-04 15:37:19 +03:00
cee888255b
unix: djgpp errno.h have no ENOTSUP, so define it to Linux value.
2016-04-03 23:23:01 +03:00
28d4b94dce
docs/machine: Change wording to be a bit more port-neutral.
2016-04-03 20:49:29 +03:00
69b702276b
docs/os: Change wording to be a bit more port-neutral.
2016-04-03 20:49:25 +03:00
e24674d44e
docs: esp8266: esp.socket is deprecated, remove from docs.
2016-04-03 20:19:39 +03:00
69256ac0b1
esp8266: Bump heap size to 24k.
2016-04-03 19:55:45 +03:00
debbaac1bd
esp8266: Update flashing instructions in README.
2016-04-03 16:04:18 +03:00
919b70b7ec
esp8266: Switch back to flashing combined firmware (single file).
...
With gap between segments minimized, there's not much padding to flash,
so no big speed overhead.
2016-04-03 15:48:46 +03:00
8d2bcaf3cd
esp8266: Minimize gap between Inst/DataRAM segments and FlashROM segment.
...
With .rodata being in FlashROM now, gap can be much smaller now. InstRAM
can be max 32K, and with segment headers, that already makes it more than
32K. Then there's some .data still, and the next Flash page boundary is
0x9000. That figure should be more or less future-proof.
TODO: Refactor makeimg to take FlashROM segment offset from file name.
2016-04-03 15:45:14 +03:00
9698a60591
esp8266/ets_alt_task: Comment out debug output.
2016-04-03 01:04:01 +03:00
fcd6862597
esp8266: Bump iROM size to 512k.
...
Needed for frozen scripts, and for future growth of binary.
2016-04-03 00:57:27 +03:00
ef0c5db2ed
esp8266: Move .rodata where it belongs with -mforce-l32 help.
2016-04-03 00:51:51 +03:00
254a5646c1
docs: Update copyright notice.
2016-04-03 00:05:23 +03:00
333a63efaa
esp8266/README: Add link to docs.
2016-04-03 00:01:31 +03:00
4f2d59e82f
examples/http_client_ssl.py: HTTPS client example.
2016-04-02 23:19:03 +03:00
ec5f8db49d
examples/http_server.py: Bind to 0.0.0.0, to be accessible from other hosts.
...
This is helpful when running on deeply embedded targets, but may be
"security risk". Caveat emptor.
2016-04-02 23:14:19 +03:00
c07a03a36d
examples/http_server.py: Introduce main() function.
...
Allows to re-run code if it was imported as a module (e.g., on bare-metal
ports).
2016-04-02 20:57:58 +03:00
aa3fb7b387
examples/http_server.py: Refactor/simplify for Python 3.5.
2016-04-02 20:53:29 +03:00
fd2b71f972
examples/http_client.py: Introduce main() function.
...
Allows to re-run code if it was imported as a module (e.g., on bare-metal
ports).
2016-04-02 19:13:39 +03:00
a5d07c3aba
examples/http_client.py: Improve CPython compatibility in stream mode.
2016-04-02 17:28:42 +03:00
a5d2af7949
unix/file: "encoding" arg to open() isn't kw-only.
...
And with "buffering" arg introduced, it's non possible to make it
non-kwonly.
2016-04-02 17:23:51 +03:00
e5fa163a4c
unix/file: Parse "buffering" argument of open() builtin.
...
It's ignored (unbuffered, raw I/O is used), but least makes it compatible
with CPython.
2016-04-02 17:23:46 +03:00
a0cb4eda9a
esp8266: Use VM_HOOK to call ets_loop_iter within the VM.
...
Starting with a divisor of 10, pystone_lowmem gives a score of 256.
2016-04-02 01:34:32 +03:00
cef073877b
example/http_client.py: Remove unused code.
2016-04-01 21:10:06 +03:00
cf4b72bf13
examples: http_client.py, http_server.py aren't just unix, move to network/.
2016-04-01 20:53:23 +03:00
b475327ffa
py/map: Prevent map resize failure from destroying map.
2016-04-01 16:36:00 +03:00
Paul Sokolovsky
pohmelie
Tom Sparks
Martin Fischer
Damien George
Stephen Kyle