djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
30,030 Commits 21 Branches 274 Tags 785 MiB
f29cd4a836
Commit Graph

9567 Commits

Author SHA1 Message Date
RetiredWizard
f29cd4a836 Pre-commit fix trim trailing whitespace 2023-02-11 12:13:34 -05:00
RetiredWizard
a462a316bd Fix pre-commit formatting 2023-02-11 12:10:03 -05:00
RetiredWizard
a2bbca1428 Broadcom Raspberry Pi Zero2W neopixel timing fix 
These changes result in working neopixel functionality. I've tested on
both the zero2w and the pi4b (The 4b didn't exhibit the original issue)
and the boards now behave properly with 1 to 30 pixels and the board hanging
no longer occurs.

Remove mod that didn't help during testing
Restoring back to original structure
Replace 2 microsecond delay w/deterministic loop
Remove unneded check for empty queue

Put transmit delay outside loop so Queue is used

Make sure last transmission is complete
 2023-02-11 11:38:11 -05:00
Jeff Epler
b03eed32fb espressif: i2sout: wait a short time to succesfully write data 2023-02-03 14:22:03 -06:00
Jeff Epler
41dff5d8cc espressif: i2sout: don't needlessly set sample rate 
this may reduce glitches when starting samples
 2023-02-03 14:22:03 -06:00
Jeff Epler
75ed28665c espressif: i2sout: enlarge buffers 2023-02-03 14:22:03 -06:00
Dan Halbert
f13e6d8758 update flash chip for Metro M7 1011 2023-02-03 11:56:42 -05:00
Dan Halbert
aafec496c3
Merge pull request #7539 from DavePutz/issue_7419 
Correct assignment of RMT channels on ESP32C3
 2023-02-02 17:35:37 -05:00
root
750535d4af Correct assignment of RMT channels on ESP32C3 2023-02-02 14:55:57 -06:00
Gregory Neverov
77c6daf4b8 don't throw exception 2023-02-01 16:33:22 -08:00
MicroDev
d9d94eacca
run updated pre-commit 2023-02-01 13:38:41 +05:30
Dan Halbert
9ab0733a28
Merge pull request #7530 from BrainBoardz/main 
BrainBoardz Neuron Commit (Final I Hope!) - Updated as Per Previous Instructions VID+PID Work
 2023-01-31 23:33:34 -05:00
brainboardz
2656ccffe4 Commit01-31 2023-01-31 19:35:57 -05:00
Dan Halbert
2faa8a435a
Merge pull request #7510 from BPI-STEAM/CircuitPython-main 
Update mpconfigboard.h  with LED definition for BPI-Bit-S2.
 2023-01-31 16:08:10 -05:00
Scott Shawcroft
e1041a8625
Merge pull request #7509 from RetiredWizard/seeedc3 
seeed_xiao_esp32c3 flash mode change to dio
 2023-01-31 11:29:24 -08:00
Jeff Epler
b8d6f20308
Add front buttons as D0/1/2, matching the silk 2023-01-31 10:02:21 -06:00
brainboardz
f3b1ceeb81 Seventh Commit 2023-01-30 20:45:57 -05:00
brainboardz
f71b4bc018 Sixth Commit 2023-01-30 20:32:19 -05:00
brainboardz
e10816f34c Fifth Commit 2023-01-30 20:20:37 -05:00
brainboardz
3f3519e0ab Fourth Commit 2023-01-30 20:10:34 -05:00
brainboardz
7c525fdcb0 Third Commit 2023-01-30 19:54:11 -05:00
brainboardz
34f480d735 Second Commit 2023-01-30 19:03:57 -05:00
brainboardz
d6ebf1bf43 First commit 2023-01-30 17:12:21 -05:00
Wind-stormger
6e31cd0a4f Update mpconfigboard.h 2023-01-30 15:41:42 +08:00
RetiredWizard
dc5cd27555 seeed_xiao_esp32c3 flash mode change to dio 
I was having trouble flashing CircuitPython to the Seeed xiao
esp32c3 using the make flash option. With the help of DAN and
Neradoc I was able to perform a manual flash and use the make
flash option to flash an Adafruit_qtpy_esp32c3 bin but when I
went back and attempted to use make flash on the seeed bin it didn't
work. Comparing the builds, the flash mode was different and after
making this change the seeed build now flashes properly using make
flash.
 2023-01-30 02:01:33 -05:00
MicroDev
f7167bd735
Merge pull request #5999 from anecdata/ESP32-S3-DevKitC-1-N32R8 
Espressif ESP32-S3 DevKitC-1-N32R8
 2023-01-29 10:27:08 +05:30
MicroDev
858e212e34
enable octal flash in sdkconfig 2023-01-29 00:23:02 +05:30
Dan Halbert
7522522a0a
Merge pull request #7501 from pypewpew/pewpewm4-cdc 
pewpew m4: enable CDC back
 2023-01-28 12:00:49 -05:00
Radomir Dopieralski
5b814a4561 pewpew m4: enable CDC back 
CDC got disabled on this board by mistake
 2023-01-28 17:20:22 +01:00
MicroDev
401d160c58
opi flash needs to be flashed in dout 2023-01-28 11:04:21 +05:30
MicroDev
cda5689263
move esp32_camera to espcamera 2023-01-27 22:05:43 +05:30
Scott Shawcroft
a7b12de6ee
Merge pull request #7473 from MicroDev1/espulp 
Add ULP FSM
 2023-01-26 09:57:35 -08:00
MicroDev
bfb77d0544
move ULPArch to Architecture 2023-01-26 13:01:14 +05:30
MicroDev
a6861adb1f
Merge branch 'main' of origin into ESP32-S3-DevKitC-1-N32R8 2023-01-26 11:21:43 +05:30
MicroDev
e5cfab060d
remove redundant config messages 2023-01-26 11:20:18 +05:30
MicroDev
90e8f9d4a8
fix espressif 32MB partition table 2023-01-26 11:19:22 +05:30
Dan Halbert
5fb0333aa9
Merge pull request #7478 from jepler/fix-esp32s3-reverse-tft-pid 
Feather ESP32-S2 Reverse TFT: Update PID to match internal list
 2023-01-25 21:24:00 -05:00
Jeff Epler
ace2062564
remove board that will not be manufactured 2023-01-25 15:10:06 -06:00
Dan Halbert
19c1eb2d1d update esp-idf from latest release/v4.4 2023-01-25 15:44:43 -05:00
Scott Shawcroft
f56a6a92f4
Merge pull request #7474 from RetiredWizard/broadcomRTC 
Broadcom port: Add 'fake' RTC support
 2023-01-25 11:33:17 -08:00
MicroDev
9487fb51a4
prettify espressif partition tables 2023-01-25 19:40:14 +05:30
RetiredWizard
ecde85734c Remove a couple unneeded includes. 2023-01-23 15:17:24 -05:00
RetiredWizard
fb4def2824 remove CIRCUITPY_RTC = 1 from mpconfigport.mk 
Full build includes the RTC bits so don't need to enable it
in ports/broadcom/mpconfigport.mk
 2023-01-23 14:52:20 -05:00
RetiredWizard
43b1d2618e
Remove erroneous left over comment 2023-01-23 14:19:27 -05:00
Jeff Epler
e018c6d022
Update PID to match internal list 2023-01-23 13:13:27 -06:00
RetiredWizard
4f830f1bbb Fix parameter name and remove unnecessary function 2023-01-21 22:57:52 -05:00
RetiredWizard
3361ec390d Broadcom port: Add 'fake' RTC support 
The Broadcom chips apparently don't have an RTC, so this PR uses the
timer to add dummy RTC responses and allow resonable results
from time.localtime() as well as setting the time and date while
the board is powered.
 2023-01-21 22:19:10 -05:00
MicroDev
2bb12293f8
add ulp fsm 2023-01-21 17:44:08 +05:30
Dan Halbert
13338df9f1
Merge pull request #7462 from tannewt/fix_rp2_reset_reason 
Tweak RP2040 reset reason
 2023-01-19 21:10:57 -05:00
Dan Halbert
f826904995
Merge pull request #7468 from DavePutz/issue_6975 
Fixes for microcontroller.on_next_reset() on NRF
 2023-01-19 19:03:46 -05:00