Commit Graph

324 Commits

Author SHA1 Message Date
Scott Shawcroft 40118bcf57
Add `board_deinit` for use with sleep
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)

Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.

Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.

ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.

Fixes #3786
2020-12-08 10:52:25 -08:00
Dan Halbert 8b7c23c1ee address review comments 2020-12-01 20:01:14 -05:00
Dan Halbert 104a089677 deep sleep working; deep sleep delay when connected 2020-11-26 22:06:37 -05:00
Dan Halbert ef0830bfe2 merge from upstream + wip 2020-11-25 17:52:06 -05:00
Dan Halbert a0f1ec3c4a wip 2020-11-22 19:10:09 -05:00
Dan Halbert 75559f35cc wip: ResetReason to microcontroller.cpu 2020-11-21 23:29:52 -05:00
Jeff Epler aaca3eccf1 samd: PDMIn: Reduce code unrolling on samd21 only
Instead of unrolling the code 16 times, unroll it 4 times and loop
over it 4 times.  This gives the same 16 iterations, but at an expense
of less flash space.
2020-11-19 16:19:37 -06:00
Dan Halbert ffff02c053 Merge remote-tracking branch 'adafruit/main' into sleep 2020-11-16 12:06:11 -05:00
Scott Shawcroft bda3267432
Save flash space
* No weak link for modules. It only impacts _os and _time and is
  already disabled for non-full builds.
* Turn off PA00 and PA01 because they are the crystal on the Metro
  M0 Express.
* Change ejected default to false to move it to BSS. It is set on
  USB connection anyway.
* Set sinc_filter to const. Doesn't help flash but keeps it out of
  RAM.
2020-11-13 18:57:52 -08:00
Scott Shawcroft 68eb809fbf
Update parallel bus signatures 2020-11-13 18:57:52 -08:00
microDev 930cf14dce
Add check for invalid io, function to disable all alarms 2020-10-27 16:17:26 -07:00
microDev e35938971a
Add description of alarm modules 2020-10-27 16:16:55 -07:00
Jeff Epler fb768dfc14 samd: AnalogOut: Better handle boards which IGNOREd analog pins 2020-10-17 20:08:32 -05:00
Jeff Epler eb0b023dee samd: extend IGNORE_PIN_foo to all sam e5x/e5x pins 2020-10-17 20:08:32 -05:00
Jeff Epler aa3c890ead samd: pin: Fix 'undefined reference to pin_PA30'
.. when PA30 is IGNOREd
2020-10-17 20:08:32 -05:00
Scott Shawcroft 379e73af2e
Finer grained, per port tick locking
Fixes #3504 hopefully.
2020-10-12 18:43:21 -07:00
Jeff Epler 16ed875f4e canio: remove unused fields
these relate to properties that were removed as well
2020-10-06 20:14:50 -05:00
Jeff Epler 611f81ac1a canio: actually drop the _error_count properties
thanks @tannewt
2020-09-29 14:25:53 -05:00
Jeff Epler f4e36fc7f6 CAN: Use mp_obj_t insteaed of canio_message_obj_t, get rid of rtr field 2020-09-28 17:22:00 -05:00
Jeff Epler 3e97e9c4be canio: Listener: shuffle function declarations around 2020-09-28 17:22:00 -05:00
Jeff Epler 48bda589b8 Listerner: read -> receive, drop readinto
This prepares for creating a separate RemoteTransmissionRequest class
2020-09-28 17:22:00 -05:00
Jeff Epler 79ca430ddf Match: address -> id 2020-09-28 17:22:00 -05:00
Jeff Epler 59580d0f2d canio: Fix implementation bugs in atmel-sam 2020-09-22 09:36:29 -05:00
Jeff Epler 4869dbdc67 canio: rename from _canio
This reflects our belief that the API is stable enough to avoid incompatible changes during 6.x.
2020-09-21 16:44:26 -05:00
Jeff Epler 9e8f1820c8 canio.CAN: switch rx/tx, make both mandatory, move declarations around 2020-09-21 16:44:26 -05:00
Jeff Epler 7fd6cab2ac canio: Make both tx and rx (but not both) optional
.. loopback and silent come from the (optional) constructor parameters
not guessing based on the pin specification

.. docstring & comment improvements
2020-09-21 16:44:26 -05:00
Jeff Epler 44c5b2bbb1 Respond to review comments
Thanks @tannewt!
2020-09-21 16:44:26 -05:00
Jeff Epler 58b920ed97 fix whitespace 2020-09-21 16:44:26 -05:00
Jeff Epler 27cbb690e5 _canio: Add listener matching
Lightly tested:
 * no matches (catch-all)
 * standard address single address matches (even and odd positions)
 * standard address mask matches
 * only tested that extended doesn't match non-extended
2020-09-21 16:44:26 -05:00
Jeff Epler 635fcadb59 _canio.CAN: add error handling & bus state 2020-09-21 16:44:26 -05:00
Jeff Epler a2e1867f69 _canio: Minimal implementation for SAM E5x MCUs
Tested & working:

 * Send standard packets
 * Receive standard packets (1 FIFO, no filter)

Interoperation between SAM E54 Xplained running this tree and
MicroPython running on STM32F405 Feather with an external
transceiver was also tested.

Many other aspects of a full implementation are not yet present,
such as error detection and recovery.
2020-09-21 16:44:26 -05:00
Jeff Epler 183649aad8 samd: move mcu_find_pin_function to header
.. it'll be used in can as well as sdio
2020-09-21 16:44:07 -05:00
Dan Halbert 5116375604
Merge pull request #3436 from jepler/fix-spi-sercom4
samd: SPI: improve conditional code
2020-09-18 19:14:39 -04:00
Dan Halbert 23dd7c7c96
Merge pull request #3435 from jepler/fix-sdhc1
sdioio: fix code for the case where there is no SDHC1
2020-09-18 17:10:59 -04:00
Dan Halbert 550b42e4d3
Merge pull request #3434 from jepler/same54-disable-cpu-voltage
sam e54: disable microcontroller.cpu.voltage
2020-09-18 15:20:43 -04:00
Jeff Epler 45eec5b5a5 samd: SPI: improve conditional code
I recently misdiagnosed a "maybe-uninitialized" diagnostic as a bug in
asf4.  However, the problem was in our SPI code.

A special case for samr21 MCUs was being applied to same54p20a and possibly
other D5x/E5x MCUs, since the check was simply for pin PC19 existing at all.

Change the check to use the macro PIN_PC19F_SERCOM4_PAD0 which is only
defined if special function F of pin PC19 is SERCOM4 PAD0.

Reorganize the code a little bit so that brace-matching in editors is
not confused by the conditionalized code, including an unrelated change
for APA102_SCK's condition.

Revert the change to the Makefile that incorrectly attempted to silence
the diagnostic.
2020-09-17 18:30:22 -05:00
Jeff Epler c73182803d sdioio: fix code for the case where there is no SDHC1
.. it doesn't really make a difference (the old code created an empty
else{} statement) but this is more correct.
2020-09-17 18:29:31 -05:00
Jeff Epler 1b29ceaf1a sam e54: disable microcontroller.cpu.voltage
This hangs, and the usual workarounds didn't work.
2020-09-17 18:27:43 -05:00
Jeff Epler 1fc797132a
Merge pull request #3237 from DavePutz/issue3216
Issue#3216 - Needed an alternate way to check if background tasks were run
2020-09-16 08:47:33 -05:00
Dan Halbert 3c6af94fb3
Merge pull request #3384 from jepler/feather_m4_can
atmel-samd: add same51, feather_m4_can
2020-09-14 23:57:51 -04:00
DavePutz 2a2a8d6457
Merge pull request #28 from adafruit/main
Merge from adafruit/main
2020-09-14 16:50:40 -05:00
DavePutz 2eca4ee902
Update PulseIn.c 2020-09-14 11:04:45 -05:00
DavePutz c014ac3089
Reworked check for input taking too long 2020-09-14 10:54:57 -05:00
Jeff Epler e066448e36 atmel-samd: add same51, feather_m4_can
This is compile-tested, and requires updates in the related submodules:

https://github.com/adafruit/samd-peripherals/pull/35
https://github.com/adafruit/asf4/pull/37

This should not be merged until those can also be merged.
2020-09-08 13:06:45 -05:00
root 2690faec43 Moved checks for invalid pin to common-hal/microcontroller/Pin.c 2020-09-05 11:42:06 -05:00
Lucian Copeland 8021da08d3 Fix problematic whitespace on pulseout parameter errors 2020-08-27 11:07:47 -04:00
root fe0f79adce Making requested modifications 2020-08-21 20:38:19 -05:00
Scott Shawcroft a5b01f7361
Merge remote-tracking branch 'adafruit/main' into add_pwmio 2020-08-21 11:13:53 -07:00
root 6eae7ce78f Requested changes to pulsein 2020-08-20 16:57:00 -05:00
Scott Shawcroft 6857f98426
Split pulseio.PWMOut into pwmio
This gives us better granularity when implementing new ports because
PWMOut is commonly implemented before PulseIn and PulseOut.

Fixes #3211
2020-08-18 13:08:33 -07:00