Commit Graph

12895 Commits

Author SHA1 Message Date
Damien George
78ab2eeda3 py/showbc: Print unary-op string when dumping bytecode.
Signed-off-by: Damien George <damien@micropython.org>
2021-11-19 17:05:40 +11:00
Lorenzo Cappelletti
8f0e304e65 stm32/boards: Add new board MikroElektronika Quail, and F427 support.
Quail (https://www.mikroe.com/quail, PID: MIKROE-1793) is based on an
STM32F427VI CPU, featuring 2048 kB of Flash memory and 192 kB of RAM.  An
on-board Cypress S25FL164K adds 8 MB of SPI Flash.

Quail has 4 mikroBUS(TM) sockets for Mikroe click(TM) board connectivity,
along with 24 screw terminals for connecting additional electronics and two
USB ports (one for programming, the other for external mass storage).

4 UARTs, 2 SPIs and 1 I2C bus are available for communication.

Signed-off-by: Lorenzo Cappelletti <lorenzo.cappelletti@gmail.com>
2021-11-19 16:33:13 +11:00
Lorenzo Cappelletti
16c7a80874 stm32/boards/MIKROE_CLICKER2_STM32: Add more detail to board.json.
Signed-off-by: Lorenzo Cappelletti <lorenzo.cappelletti@gmail.com>
2021-11-19 16:32:53 +11:00
iabdalkader
78425208ba nrf/main: Use VFS helper function to mount fs and chdir. 2021-11-19 15:43:04 +11:00
iabdalkader
f7a0c98e00 extmod/network_ninaw10: Fix scan list order to match other NICs. 2021-11-19 15:41:26 +11:00
iabdalkader
b65d17fced drivers/ninaw10: Fix BSSID byte order, and add null byte to ESSID.
- Fix the BSSID byte order from scan and netinfo.
- Make sure ESSID from netinfo is null terminated.
2021-11-19 15:41:26 +11:00
Jim Mussared
841eeb158e drivers/neopixel: Avoid heap alloc in fill().
Previously the use of `range(start,stop,step)` caused an allocation.
Replace with while loop.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-11-19 15:37:06 +11:00
Mike Causer
172a031dff rp2/boards/PIMORONI_PICOLIPO_16MB: Fix 16MB flash size.
Was incorrectly added as 7MB for an 8MB SPI flash, but this board has a
16MB chip, not 8MB, so it should be 15MB leaving 1MB for MicroPython.

Thanks to @robert-hh
2021-11-19 15:34:07 +11:00
NitiKaur
b851950c26 docs/library/sys.rst: Add docs for sys.settrace. 2021-11-19 15:30:34 +11:00
NitiKaur
e538d8a5a6 docs/rp2/quickref.rst: Add section on PIO. 2021-11-19 15:30:14 +11:00
Damien George
01f1c3aac2 docs/reference/filesystem.rst: Add detail on how to use littlefs fuse.
Without the --block_count option the fuse will fail.

Signed-off-by: Damien George <damien@micropython.org>
2021-11-19 15:13:05 +11:00
Seon Rozenblum
1904833e0c esp32: Add SDCard support for S3, and a GENERIC_S3_SPIRAM board.
Also add support for GPIO 47 and 48 on S3 boards.
2021-11-19 14:05:55 +11:00
oli
f72b49756d docs/library/rp2.rst: Update function asm_pio_encode to add sideset_opt. 2021-11-19 13:38:56 +11:00
oli
0a9335ecaa rp2/rp2_pio: Support exec with sideset.
The rp2.StateMachine.exec errors when supplying a sideset action.  This
commit passes the sideset_opt from the StateMachine though to the parser.
It also adds some value validation to the sideset operator.

Additionally, the "word" method is added to the exec to allow any other
unsupported opcodes.

Fixes issue #7924.
2021-11-19 13:35:28 +11:00
Peter van der Burg
3dc9a42bc2 samd/README.md: Update README to reflect new features and boards. 2021-11-19 11:49:10 +11:00
Peter van der Burg
b991902983 samd/boards/SEEED_XIAO: Add new board definition. 2021-11-19 11:48:25 +11:00
Peter van der Burg
ef4e63aabc samd/boards/SEEED_WIO_TERMINAL: Add new board definition. 2021-11-19 11:48:12 +11:00
Peter van der Burg
771d673e5c samd/boards/SAMD21_XPLAINED_PRO: Update for flash and pins.
- mpconfigboard.h: flash and USART config
- mpconfigboard.mk: enable LFS1
- pins.c: define pins and LEDs
- pins.h: define structs and consts
2021-11-19 11:47:43 +11:00
Peter van der Burg
fb79e58636 samd/boards/ADAFRUIT_TRINKET_M0: Update for flash and pins.
- mpconfigboard.h: flash and USART config
- mpconfigboard.mk: enable LFS1
- pins.c: define pins and LEDs
- pins.h: define structs and consts
2021-11-19 11:47:19 +11:00
Peter van der Burg
3d33dbedc9 samd/boards/MINISAM_M4: Update for flash and pins.
- mpconfigboard.h: flash and USART config
- mpconfigboard.mk: enable LFS1
- pins.c: define pins and LEDs
- pins.h: define structs and consts
2021-11-19 11:46:53 +11:00
Peter van der Burg
199b6a8a8b samd/boards/ADAFRUIT_ITSYBITSY_M4_EXPRESS: Update for flash and pins.
- mpconfigboard.h: flash and USART config
- mpconfigboard.mk: enable LFS1
- pins.c: define pins and LEDs
- pins.h: define structs and consts
2021-11-19 11:46:30 +11:00
Peter van der Burg
72cb4ff596 samd/boards/ADAFRUIT_FEATHER_M0_EXPRESS: Update for flash and pins.
- mpconfigboard.h: flash and USART config
- mpconfigboard.mk: enable LFS1
- pins.c: define pins and LEDs
- pins.h: define structs and consts
2021-11-19 11:44:07 +11:00
Peter van der Burg
2f65ded1a2 samd: Add Pin and LED classes, and machine.unique_id. 2021-11-19 11:43:06 +11:00
Peter van der Burg
2121353602 samd: Add internal flash block device, filesystem and uos support. 2021-11-19 11:42:58 +11:00
Peter van der Burg
4c132614e1 samd/samd_soc: Allow a board to configure the low-level MCU config.
The board specific #defines will be moved to individual boards.
2021-11-19 11:42:47 +11:00
Peter van der Burg
cd2223b8fe samd: Integrate latest asf4, add help, more time funcs and uPy features.
- Makefile: update to use new ASF4 files, support frozen manifest, and
  include source files in upcoming commits
- boards/manifest.py: add files to freeze
- boards/samd51p19a.ld: add linker script for this MCU
- help.c: add custom help text
- main.c: execute _boot.py, boot.py and main.py on start-up
- modules/_boot.py: startup file to freeze
- modutime.c: add gmtime, localtime, mktime, time functions
- mpconfigport.h: enabled more features for sys and io and modules
- mphalport.h: add mp_hal_pin_xxx macros
- mphalport.c: add mp_hal_stdio_poll
2021-11-19 11:05:05 +11:00
Damien George
f27be2d78a lib/asf4: Point submodule to latest commit on circuitpython branch. 2021-11-18 12:44:30 +11:00
stijn
5900257dd6 extmod/uplatform: Use generic custom platform string.
Don't force the 'HAL' string to be part of the platform string because
it doesn't have a sensible meaning for all possible platforms, and
swap it with the PLATFORM_ARCH string so the strings which most platforms
have come first.
2021-11-18 10:46:14 +11:00
stijn
1e5875557a extmod/uplatform: Remove unused definitions. 2021-11-18 10:46:14 +11:00
retsyo
e5f9e2febc windows/mpconfigport.h: Enable help and help("modules").
Following a similar change to the unix port in
6430cd3e02
2021-11-17 14:52:39 +11:00
Matt van de Werken
a4c0f52714 stm32/led: Support an extra 2 LEDs in board configuration.
Although the pyboard has only 4 LEDs, there are some boards that (may) have
more.  This commit adds 2 more LEDs to the led.c file that if defined in
the board-specific config file will be compiled in.
2021-11-17 14:46:58 +11:00
Sebastian Wicki
8f3510799d docs/library/framebuf.rst: Adjust dimensions in example.
This commit swaps the dimensions of the `framebuffer.FrameBuffer` in the
docs example from 10x100 to 100x10 pixels to avoid clipping.

This is done to better fit the subsequent example code, which writes
text of size 96x8 followed by a 96x1 horizontal line.

The y coordinate of the horizontal line is also adjusted such that it is
drawn inside of the new canvas bounds.
2021-11-17 14:36:33 +11:00
Pooya Moradi
95ccd9a005 nrf/Makefile: Improve Black Magic Probe commands.
Used batch mode to get rid of the confirmation prompt on flashing.
Used 'compare-sections' to verify flash.
Removed the unnecessary `quit` at the end.
2021-11-17 14:32:02 +11:00
jc_.kim
19f09414a6 tests/micropython/const.py: Add comment about required config for test.
Expected result of const.py will be matched only when MICROPY_COMP_CONST is
enabled.  For easy understanding, added description at the first of the
test code.
2021-11-17 14:28:20 +11:00
Damien George
43d08688c3 extmod/uasyncio: Fix gather returning exceptions from a cancelled task.
Fixes issue #5882.
2021-11-17 14:11:31 +11:00
Alexey 'alexxy' Shvetsov
5cf71b5596 shared/libc/string0: Don't include string.h, and provide __memcpy_chk.
Some toolchains will have string.h defining various macros which can lead
to compile errors for string function implementations.  Not including
string.h fixes this.

An implementation of __memcpy_chk is provided for toolchains that enable
_FORTIFY_SOURCE.

Fixes issue #6046.

Signed-off-by: Alexey 'alexxy' Shvetsov <alexxyum@gmail.com>
2021-11-17 13:58:07 +11:00
Henk Vergonet
d11ff0499f unix/modos: Add support for uos.urandom(n).
Use getrandom function if available, otherwise read from /dev/urandom.

Signed-off-by: Henk.Vergonet@gmail.com
2021-11-17 12:59:38 +11:00
robert-hh
5ed7a748f0 rp2/boards: Add neopixel.py to manifest.py.
Because machine.bitstream is now implemented on the rp2 port.
2021-11-17 10:02:32 +11:00
robert-hh
b73d8b045a rp2/machine_bitstream: Implement the machine.bitstream driver.
Timing error is ~20ns at 125MHz, and ~10ns at 250MHz.
2021-11-17 10:01:15 +11:00
robert-hh
7d7d29dbe2 mimxrt: Fix mp_hal_quiet_timing_enter()/exit() so timer still runs.
The initial code disabled IRQs, which caused the us-ticks timer to stop.
The change here changes the priotity level, such that the timer still runs.
2021-11-16 23:20:06 +11:00
robert-hh
7cc9b257a9 mimxrt/boards: Update the board.json files and add deploy_xx.md files.
- Add board.md files for MIMXRT1060_EVK and MIMXRT1064_EVK warning about
  their experimental state.
- Add separate deploy_teensy.md and deploy_mimxrt.md files.
2021-11-16 23:17:42 +11:00
robert-hh
d72d699dad mimxrt/boards: Add the Seeed ARCH MIX board.
The ARCH MIX board exposes the Ethernet Pins at it's connectors.  Therefore
the software is configured for using a LAN8720 PHY device.  Breakout boards
with the LAN8720 are easily available.
2021-11-16 23:11:21 +11:00
iabdalkader
c3dceb1c32 rp2/boards: Add support for Arduino Nano RP2040. 2021-11-16 15:05:10 +11:00
iabdalkader
f082793ac4 drivers/lsm6dsox: Add LSM6DSOX driver and examples. 2021-11-16 15:05:00 +11:00
iabdalkader
3745c393c8 rp2: Add support for Nina-W10 WiFi/BT module.
This commit integrates the Nina-W10 driver as an optional component in the
rp2 port.
2021-11-13 23:01:37 +11:00
iabdalkader
43079aaf86 drivers/ninaw10: Add ublox Nina-W10 WiFi/BT module driver.
- Add WiFi/BT drivers for ublox Nina-W10 (esp32 based) module.
- Add ublox Nina-W10 Python module in extmod.
2021-11-13 23:01:03 +11:00
Mike Teachman
b6dbbbe82f rp2/machine_i2s: Add I2S protocol support.
This commit adds I2S protocol support for the rp2 port:
- I2S API is consistent with STM32 and ESP32 ports
- I2S configurations supported:
  - master transmit and master receive
  - 16-bit and 32-bit sample sizes
  - mono and stereo formats
  - sampling frequency
  - 3 modes of operation:
    - blocking
    - non-blocking with callback
    - uasyncio
  - internal ring buffer size can be tuned
- DMA IRQs are managed on an I2S object basis, allowing other
  RP2 entities to use DMA IRQs when I2S is not being used
- MicroPython documentation
- tested on Raspberry Pi Pico development board
- build metric changes for this commit: text(+4552), data(0), bss(+8)

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-13 12:27:42 +11:00
MikeTeachman
6d5296e65e stm32,esp32: In machine_i2s, make object reference arrays root pointers.
This change eliminates the risk of the IRQ callback accessing invalid data.
Discussed here:
https://github.com/micropython/micropython/pull/7183#discussion_r660209875

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-13 12:22:42 +11:00
MikeTeachman
0be3b91f11 stm32,esp32: In machine_i2s, send null samples in underflow situations.
Eliminate noise data from being sent to the I2S peripheral when the
transmitted sample stream is stopped.

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-11-12 16:50:15 +11:00
Magnus von Wachenfeldt
6d9da27c21 esp32: Support building with latest IDF v5.
The latest ESP-IDF v5.0-dev declares MAJOR_VERSION 5 and MINOR_VERSION 0.
timer_ll_set_alarm_enable() is also changed to timer_ll_set_alarm_value().
2021-11-12 16:40:46 +11:00