Commit Graph

31 Commits

Author SHA1 Message Date
Dan Ellis 6f4d424f46 py/formatfloat: Use pow(10, e) instead of pos/neg_pow lookup tables.
Rework the conversion of floats to decimal strings so it aligns precisely
with the conversion of strings to floats in parsenum.c.  This is to avoid
rendering 1eX as 9.99999eX-1 etc.  This is achieved by removing the power-
of-10 tables and using pow() to compute the exponent directly, and that's
done efficiently by first estimating the power-of-10 exponent from the
power-of-2 exponent in the floating-point representation.

Code size is reduced by roughly 100 to 200 bytes by this commit.

Signed-off-by: Dan Ellis <dan.ellis@gmail.com>
2022-08-12 23:53:34 +10:00
Dan Ellis f9cbe6bc47 py/formatfloat: Format all whole-number floats exactly.
Formerly, py/formatfloat would print whole numbers inaccurately with
nonzero digits beyond the decimal place.  This resulted from its strategy
of successive scaling of the argument by 0.1 which cannot be exactly
represented in floating point.  The change in this commit avoids scaling
until the value is smaller than 1, so all whole numbers print with zero
fractional part.

Fixes issue #4212.

Signed-off-by: Dan Ellis dan.ellis@gmail.com
2022-07-26 22:23:47 +10:00
stijn bcf01d1686 all: Fix implicit conversion from double to float.
These are found when building with -Wfloat-conversion.
2020-04-18 22:42:24 +10:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Damien George 955ee6477f py/formatfloat: Fix case where floats could render with negative digits.
Prior to this patch, some architectures (eg unix x86) could render floats
with "negative" digits, like ")".  For example, '%.23e' % 1e-80 would come
out as "1.0000000000000000/)/(,*0e-80".  This patch fixes the known cases.
2018-03-01 17:00:02 +11:00
Damien George 7b050fa76c py/formatfloat: Fix case where floats could render with a ":" character.
Prior to this patch, some architectures (eg unix x86) could render floats
with a ":" character in them, eg 1e+39 would come out as ":e+38" (":" is
just after "9" in ASCII so this is like 10e+38).  This patch fixes some of
these cases.
2018-03-01 16:02:59 +11:00
Damien George bc12eca461 py/formatfloat: Fix rounding of %f format with edge-case FP values.
Prior to this patch the %f formatting of some FP values could be off by up
to 1, eg '%.0f' % 123 would return "122" (unix x64).  Depending on the FP
precision (single vs double) certain numbers would format correctly, but
others wolud not.  This patch should fix all cases of rounding for %f.
2018-03-01 15:51:03 +11:00
Damien George dc948e4d54 py/formatfloat: Use standard isinf, isnan funcs instead of custom ones.
Reduces code size by a tiny bit.
2017-10-10 16:27:54 +11:00
Damien George 08a196697c py/formatfloat: Don't print the negative sign of a NaN value.
NaN may have the sign bit set but it has no meaning, so don't print it out.
2017-10-10 16:01:13 +11:00
Damien George f5309fc4ff py/formatfloat: Don't post-increment variable that won't be used again. 2017-08-21 22:04:23 +10:00
Alexander Steffen 55f33240f3 all: Use the name MicroPython consistently in comments
There were several different spellings of MicroPython present in comments,
when there should be only one.
2017-07-31 18:35:40 +10:00
Damien George 761e4c7ff6 all: Remove trailing spaces, per coding conventions. 2017-07-19 13:12:10 +10:00
Tom Collins 145796f037 py,extmod: Some casts and minor refactors to quiet compiler warnings. 2017-07-07 11:32:22 +10:00
Damien George 6ed4581f54 py/formatfloat: Fix number of digits and exponent sign when rounding.
This patch fixes 2 things when printing a floating-point number that
requires rounding up of the mantissa:
- retain the correct precision; eg 0.99 becomes 1.0, not 1.00
- if the exponent goes from -1 to 0 then render it as +0, not -0
2017-06-13 13:36:56 +10:00
Damien George 94a587a750 py/formatfloat: Remove unreachable code.
The if-block that this unreachable code is in has a condition "f>=5" so
"fp_isless1(f)" will always fail.
2017-01-19 23:32:16 +11:00
Damien George e1e7657277 py/formatfloat: Fix further cases of buffer overflow in formatting.
Includes extensive test cases to catch hopefully all cases where
buffer might overflow.
2016-03-29 22:07:15 +01:00
Damien George 03b8bb7ec9 py/formatfloat: Fix case of float format where leading digit was "10".
When taking the logarithm of the float to determine the exponent, there
are some edge cases that finish the log loop too large.  Eg for an
input value of 1e32-epsilon, this is actually less than 1e32 from the
log-loop table and finishes as 10.0e31 when it should be 1.0e32.  It
is thus rendered as :e32 (: comes after 9 in ascii).

There was the same problem with numbers less than 1.
2016-03-29 22:03:13 +01:00
Damien George cea6cf8a5e py/formatfloat: Fix buffer overflow when formatting tiny numbers. 2016-03-15 12:21:56 +00:00
Damien George 7417ccfb0d py/formatfloat: Add ability to format doubles with exponents > 99.
For single prec, exponents never get larger than about 37.  For double
prec, exponents can be larger than 99 and need 3 bytes to format.  This
patch makes the number of bytes needed configurable.

Addresses issue #1772.
2016-01-29 11:39:12 +00:00
Paul Sokolovsky 3d6240ba1b py/formatfloat: Handle calculation of integer digit for %f format properly.
%f prints true integer digit, so its calculation should happen before any
exponential scaling.
2015-11-22 20:05:08 +02:00
Paul Sokolovsky 3c4c069802 py/formatfloat: Workaround (fix?) incorrect rounding for %f format. 2015-11-22 18:09:28 +02:00
Paul Sokolovsky 9aaccd4735 py/formatfloat: Convert to fully portable implementation.
This takes previous IEEE-754 single precision float implementation, and
converts it to fully portable parametrizable implementation using C99
functions like signbit(), isnan(), isinf(). As long as those functions
are available (they can be defined in adhoc manner of course), and
compiler can perform standard arithmetic and comparison operations on a
float type, this implementation will work with any underlying float type
(including types whose mantissa is larger than available intergral integer
type).
2015-11-22 17:54:05 +02:00
Dave Hylands 9d6128acdc stmhal: fix single precision float printing error
Fixes #1435.
2015-09-11 23:09:50 +03:00
stijn 861670ba2a py: Implement mp_format_float for doubles and use where appropriate
This allows using (almost) the same code for printing floats everywhere,
removes the dependency on sprintf and uses just snprintf and
applies an msvc-specific fix for snprintf in a single place so
nan/inf are now printed correctly.
2015-05-17 21:47:11 +01:00
Dave Hylands b21786947f py/formatfloat.c: Fix format of floating point numbers near 1.0.
In particular, numbers which are less than 1.0 but which
round up to 1.0.

This also makes those numbers which round up to 1.0 to
print with e+00 rather than e-00 for those formats which
print exponents.

Addresses issue #1178.
2015-04-12 13:06:20 +01:00
Damien George 51dfcb4bb7 py: Move to guarded includes, everywhere in py/ core.
Addresses issue #1022.
2015-01-01 20:32:09 +00:00
Paul Sokolovsky e3737b858a formatfloat.c: Typo fix in comment. 2014-07-17 20:45:58 +03:00
Damien George 04b9147e15 Add license header to (almost) all files.
Blanket wide to all .c and .h files.  Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.

Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
2014-05-03 23:27:38 +01:00
Dave Hylands baf6f14deb Enhance str.format support
This adds support for almost everything (the comma isn't currently
supported).

The "unspecified" type with floats also doesn't behave exactly like
python.

Tested under unix with float and double
Spot tested on stmhal
2014-04-01 01:17:33 -07:00
xbe efe3422394 py: Clean up includes.
Remove unnecessary includes. Add includes that improve portability.
2014-03-17 02:43:40 -07:00
Damien George 8bfec2b538 Rename formatfloat file; remove MICROPY_ENABLE_FLOAT from mpconfigport.h.
MICROPY_ENABLE_FLOAT is automatically set in mpconfig.h if MICROPY_FLOAT_IMPL
is set to a non-zero value.
2014-03-10 13:27:02 +00:00